PCA9517DRG4 - 2-Channel 400kHz I2C Buffer | Texas Instruments
MPN: PCA9517DRG4 ✓ AktifPCA9517DRG4 Ringkasan
A level-translating I2C buffer is an interface IC positioned within the hierarchy of I2C interface devices, bus repeaters, and semiconductor signal-conditioning components. It sits between a controller or peripheral and a remote I2C segment, reproducing each logic transition in the appropriate voltage domain. Unlike a unilateral digital buffer, the PCA9517 supports bidirectional signal flow, allowing SDA and SCL traffic to travel in either direction without changing the bus wiring.
The principal features are two independently buffered channels, a maximum signaling rate of 400 kHz, and operation from 2.7 V to 5.5 V. According to the manufacturer datasheet, the device can connect two buses having up to 400 pF of capacitance per bus, making it useful for extending a system beyond the capacitance limit of a direct controller connection. An enable input and reference-voltage structure support controlled bus-segment operation.
BiCMOS implementation combines low-voltage BiCMOS logic with bipolar circuitry, providing bidirectional level translation in an 8-pin SOIC package. The buffered architecture isolates capacitive loading on the remote side from the driving controller while preserving standard I2C behavior. The manufacturer datasheet identifies the PCA9517 as a BiCMOS integrated circuit intended for I2C bus and SMBus systems.
Typical uses include separating a main controller from a high-capacitance sensor bus, isolating noisy or slow-changing peripheral groups, and supporting mixed-voltage I2C segments. It is also appropriate when a cable-connected module requires buffering to improve signal integrity, provided the complete circuit remains within the specified capacitance, voltage, and frequency limits.
For layout, keep SCL and SCL2 routing short and maintain continuous ground return paths between the buffered sections. Place the device where both bus branches remain electrically short, and validate the remote branch for the datasheet capacitance limit rather than relying on the 400 kHz rating alone. Confirm enable-state behavior during power-up and shutdown before releasing the downstream bus.
This page organizes the PCA9517DRG4 electrical characteristics, package details, pin assignment, verified sourcing references, drop-in alternatives, and application guidance. It also highlights practical differences among same-footprint options so engineers can select a replacement without overlooking enable behavior, voltage range, or channel configuration.
Pilihan pengganti yang segera untuk PCA9517DRG4 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera PCA9517DRG4 (sama faktor bentuk dan kaki) — berbeza dalam Package, Number of Channels, Bus Compatibility, Device Type, Enable Control.
PCA9517DG4
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →PCA9517DR
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →TCA9517DR
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →PCA9517DP
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
PCA9517ADP,118
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
PCA9517DRG4 Spesifikasi
| Device Type | 2-channel bidirectional I2C/SMBus level-translating buffer/repeater |
| Number of Channels | 2 channels |
| Maximum Bus Frequency | 400 kHz |
| Tegangan Pemberi Arus Operasi | 2.7 V to 5.5 V |
| Low Input Voltage | 0.9 V |
| Buffered Bus Capacitance per Segment | 400 pF |
| Signal Direction | Bidirectional |
| Supported Bus | I2C and SMBus |
| Gambaran Suhu Operasi | -40 °C to +85 °C |
| Kemasan | 8-pin SOIC, 0.154 in (3.90 mm) width |
| Jenis Pemasangan | Surface mount |
| Terminal Count | 8 terminals |
| Terminal Form | Gull wing |
| Temperature Grade | Industrial |
| Technology | BiCMOS |
| Enable Control | Enable input |
Konfigurasi Pin PCA9517DRG4
| Pin 1 | VCC — Device supply voltage |
| Pin 2 | SCL1 — Clock input or output for bus segment 1 |
| Pin 3 | SDA1 — Serial data input or output for bus segment 1 |
| Pin 4 | GND — Ground connection |
| Pin 5 | SCL2 — Clock input or output for bus segment 2 |
| Pin 6 | SDA2 — Serial data input or output for bus segment 2 |
| Pin 7 | EN — Buffer enable input |
| Pin 8 | VREF — Reference voltage connection |
Aplikasi Biasa
PCA9517DRG4 patut untuk 6 aplikasis: I2C Capacitance Extension, Mixed-Voltage I2C Translation, SMBus Segment Isolation, Sensor Bus Conditioning, Embedded System Bus Segmentation, Test and Measurement Fixture.
I2C Capacitance Extension
The PCA9517DRG4 fits between an I2C controller and a remote segment when the original bus cannot support the required capacitance. According to the Texas Instruments datasheet, the device connects two buses with up to 400 pF per segment while preserving bidirectional SDA and SCL operation at up to 400 kHz. Place the buffer near the point where the remote branch begins, keep both sides short, and place pull-up resistors on the appropriate bus sections. This arrangement isolates the controller from remote loading and can improve rise-time behavior, although the complete branch must still be checked for timing margin.
Disebarkan
Mixed-Voltage I2C Translation
The PCA9517DRG4 can divide a mixed-voltage I2C system into logic domains because each buffered channel is bidirectional and the device operates from 2.7 V to 5.5 V. The manufacturer describes a 0.9 V low input threshold and identifies the PCA9517 as a BiCMOS level-translating buffer. It is appropriate when a 3.3 V controller must communicate with a 5 V peripheral group without exposing either side directly to the other voltage domain. The reference and enable connections must be configured according to the datasheet, and system-level rise-time behavior should be measured on the remote bus.
Disebarkan
SMBus Segment Isolation
The PCA9517DRG4 is suited to separating an SMBus controller from a localized group of sensors or power devices. Its two bidirectional channels buffer SCL and SDA, while its 400 kHz operating class covers standard-speed I2C and common SMBus communication rates. Isolation can reduce the effect of slow edges or loading introduced by a remote cable section. The buffer does not remove all bus-timing risks, so pull-up values, cable length, peripheral capacitance, and the enable state should be validated with an oscilloscope at the far endpoint.
Disebarkan
Sensor Bus Conditioning
The PCA9517DRG4 can condition a branch containing multiple slow-changing sensors when cable capacitance or pull-up loading makes direct controller connections unreliable. By buffering SDA and SCL at 400 kHz, it separates the controller from the remote branch and permits each side to use suitable pull-up networks. The buffered structure is particularly useful where a sensor cable creates a sizable capacitive load or where an individual device can disrupt the bus edge rate. Keep the remote side physically compact, verify the 400 pF per-bus limitation, and check that enable control does not backfeed an unpowered sensor section.
Disebarkan
Embedded System Bus Segmentation
The PCA9517DRG4 can divide an embedded I2C topology into a short processor-side bus and a longer peripheral-side bus. The 400 kHz rate suits conventional embedded buses, while the 8-pin SOIC package simplifies routing in compact industrial and consumer controllers. Segmenting the bus limits the amount of capacitance seen directly by the controller and helps prevent one peripheral group from affecting another. Proper implementation requires separate pull-ups for each voltage domain, careful ground continuity, and verification that the enable state remains controlled during reset, sleep, and power sequencing.
Disebarkan
Test and Measurement Fixture
The PCA9517DRG4 is useful in a test fixture that separates a controller under test from a short cable or adapter board carrying I2C peripherals. The buffered SDA and SCL paths reduce the capacitance presented to the device under test and can help maintain the specified 400 kHz signaling rate across fixture interconnects. The repeater's enable input can support controlled engagement of the remote branch. For high-speed or long-cable measurements, compare edge rates at both ends of the fixture and avoid interpreting successful communication at reduced clock rates as proof that full-rate timing is compliant.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk PCA9517DRG4 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | PCA9517DG4 | PCA9517DR | TCA9517DR | PCA9517DP | PCA9517ADP,118 |
|---|---|---|---|---|---|---|
| Package | 8-pin SOIC (0.154 in, 3.90 mm width) | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | NXP Semiconductors | NXP Semiconductors |
| Device Function | 2-bit level-translating I2C/SMBus buffer/repeater | PCA9517 I2C buffer/repeater | PCA9517 I2C buffer/repeater | I2C logic repeater | PCA9517-family I2C buffer | PCA9517-family I2C buffer |
Penyeberangsung Jelas
- Provides bidirectional buffering for both I2C clock and data (vsPCA9538PW)
- Directly addresses PCA9517 application limitations (vsTCA9517DR)
- Supports isolated 400 pF bus sections (vsPCA9517DP)
- Combines level translation and capacitance extension (vsPCA9517ADP,118)
Catatan Desain
Route SCL1 and SDA1 toward the controller-side connector, and SCL2 and SDA2 toward the remote bus, while keeping both branches short and symmetrical where practical. Maintain an uninterrupted ground return between the controller and remote peripheral. Place pull-up resistors on their respective bus sections rather than concentrating both networks on the source side. This arrangement maximizes the benefit of the buffered divide and avoids adding unnecessary loop area to the I2C routing.
Check SCL and SDA rise times at the far end of each buffered segment rather than at the PCA9517DRG4 pins. The device supports up to 400 kHz and two buses with up to 400 pF each, but cable length, pull-up resistance, peripheral capacitance, and leakage determine the actual edge rate. If the remote bus is slow, reduce pull-up resistance after checking the sink-current limit, shorten the branch, or use a different buffer arrangement rather than assuming the nominal frequency rating guarantees timing compliance.
Decouple the PCA9517DRG4 supply with a local ceramic capacitor and provide a low-impedance ground connection close to pin 4. The device operates from 2.7 V to 5.5 V, and both I2C bus domains may use different logic levels, so the supply and reference arrangement must be reviewed against the datasheet. Ensure the enable and reference pins are not driven through an unsuitable impedance during reset, sleep, or power-up, because unintended bus activity can complicate system startup.
Do not treat the PCA9517 as a general-purpose logic buffer or use it to exceed the I2C specification in a system that requires more than 400 pF per segment. Likewise, do not assume that two devices can be cascaded without checking their interaction, enable state, and reference configuration. Review the manufacturer datasheet for the permitted operating combinations and confirm that any candidate replacement preserves pin functions, logic thresholds, propagation behavior, and bus-capacitance capability.
Maklumat Kesediaan
The manufacturer product page identifies the PCA9517 as a 2-bit level-translating 400 kHz I2C/SMBus buffer/repeater, but the available product information does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Request current compliance documentation for the exact ordering code before using the device in a regulated production design.