Texas Instruments

PCM1781DBQ - 24-Bit Stereo Audio DAC | Texas Instruments

Teilenummer: PCM1781DBQ ✓ Aktiv
4.5 V to 5.5 V Vdss 16-lead SSOP (DBQ) Package
MOQ: 1 |

PCM1781DBQ Übersicht

The Texas Instruments PCM1781DBQ is a 24-bit stereo audio digital-to-analog converter with typical 192 kHz sampling and support for sampling rates up to 200 kHz, 106 dB signal-to-noise ratio, and a 16-lead SSOP package. It accepts industry-standard digital audio data and uses hardware control pins for configuration.

An audio DAC is a digital-to-analog converter, a member of the broader signal-conversion and data-converter hierarchy. It reconstructs continuous analog audio from sampled digital data. The PCM1781 combines two converter channels with support circuitry in a monolithic CMOS integrated circuit, making it suitable for stereo sound cards, active speakers, digital mixers, consumer audio equipment, and embedded audio systems.

Key performance characteristics include 24-bit resolution, 106 dB typical SNR at a 5 V supply, and 0.002% typical THD+N. The converter accepts standard audio formats through its serial interface, while four hardware control pins provide a simplified configuration method. These characteristics are important for reducing quantization noise and maintaining low distortion in high-fidelity audio paths.

The device uses an enhanced multilevel delta-sigma architecture. This architecture improves dynamic performance and provides better tolerance to clock jitter than conventional delta-sigma converters. Texas Instruments identifies the PCM1780, PCM1781, and PCM1782 as a related CMOS family with different control-interface feature sets, allowing engineers to select the converter that matches their system architecture without changing the basic 16-lead SSOP footprint.

Typical applications include professional and consumer stereo audio equipment, powered speaker systems, digital mixing consoles, automotive infotainment systems, and audio interfaces requiring two analog outputs. The 16-lead SSOP package supports compact, surface-mount PCB layouts, although analog and digital return paths still require careful layout discipline.

For reliable performance, use the application circuit recommended by the manufacturer for supply decoupling, reference-voltage treatment, and analog output filtering. Keep the digital clock and data traces away from the analog outputs, provide adequate output-stage drive for the intended load, and verify headroom, filtering, and timing against the device data sheet before releasing a production design.

This product page combines the manufacturer specifications with practical selection guidance, interface analysis, drop-in family comparisons, application notes, and PCB design considerations. It focuses on the engineering distinctions that determine whether the PCM1781DBQ is suitable for a stereo audio conversion design.

Drop-in-Alternativen für PCM1781DBQ – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit PCM1781DBQ (gleiche Bauform und Footprint) – abweichend in Control Interface, Digital Audio Interface, Package, Process Technology.

Texas Instruments
Control Interface: Three-wire serial control port with register write functions
Digital Audio Interface: I2S
Package: 16-lead SSOP
Vergleichen mit PCM1781DBQ →

PCM1781DBQG4

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 SSOP-16 (DBQ)
Same 24-bit stereo DAC, 192 kHz nominal sampling rate, and SSOP-16 footprint; G4 designation changes the environmental or processing grade, while core parameters remain equal within 0%

📋 Referenzalternative (nicht im Katalog)

PCM1780DBQ

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 SSOP-16 (DBQ)
Same 24-bit stereo converter family and SSOP-16 package; sampling capability remains 200 kHz, but three-wire serial control replaces four hardware control pins

📋 Referenzalternative (nicht im Katalog)

PCM1782DBQ

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Texas Instruments
📦 SSOP-16 (DBQ)
Stereo audio digital-to-analog converter · 24 bit · 192 kHz · 200 kHz · I2S · Enhanced multilevel delta-sigma · CMOS monolithic · 2 channels

Preis auf Anfrage

Datenblatt ansehen →

PCM1780DBQG4

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 SSOP-16 (DBQ)
Same PCM1780 converter family and SSOP-16 footprint with G4 grade; nominal sampling rate is 192 kHz and maximum is 200 kHz, with a three-wire serial control interface

📋 Referenzalternative (nicht im Katalog)

PCM1782DBQG4

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 SSOP-16 (DBQ)
Same PCM1782 converter family and SSOP-16 footprint with G4 grade; nominal sampling rate is 192 kHz and maximum is 200 kHz, with a three-wire serial control interface

📋 Referenzalternative (nicht im Katalog)

PCM1781DBQ Grenzwerte & elektrische Eigenschaften

Auflösung 24 bit
Nominal Sampling Rate 192 kHz
Maximum Sampling Rate 200 kHz
Signal-to-Noise Ratio 106 dB typical at 5 V
THD+N 0.002% typical
Converter Architecture Enhanced multilevel delta-sigma
Number of DAC Channels 2 channels
Number of Analog Outputs 2 outputs
Supply Voltage Range 4.5 V to 5.5 V
Nominal Supply Voltage 5 V
Control Interface Four hardware control pins
Digital Audio Interface Industry-standard serial audio data interface
Process Technology CMOS
Gehäuse 16-lead SSOP (DBQ)
Montageart Surface mount
Pin-Anzahl 16 pins

PCM1781DBQ 16-lead ssop (dbq) Pinbelegungsleitfaden

Pinbelegung für PCM1781DBQ (16-lead ssop (dbq)-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für PCM1781DBQ im 16-lead ssop (dbq)-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für PCM1781DBQ.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

PCM1781DBQ ist geeignet für 6 Anwendungs: Stereo Sound-Card Output, Powered Speaker DAC Section, Digital Mixing Console, Automotive Infotainment Audio, Digital Audio Interface, Consumer Audio Equipment.

🎧

Stereo Sound-Card Output

The PCM1781DBQ fits a two-channel PC sound-card output because it converts digital audio into left and right analog signals at 24-bit resolution, with 192 kHz nominal sampling and support up to 200 kHz. Its 106 dB typical SNR and 0.002% typical THD+N provide a suitable performance baseline for music playback and general multimedia equipment. Place the DAC close to the line-output connector, decouple the 5 V supply locally, and keep digital bus routing away from the analog outputs. The four hardware control pins can configure the converter without a host-driven register interface, simplifying designs where the required operating modes are known at power-up.

🔊

Powered Speaker DAC Section

A powered speaker can use the PCM1781DBQ to generate analog stereo signals before amplification, avoiding a digital transport through the speaker wiring. The converter’s two output channels, 24-bit resolution, and 200 kHz maximum sampling rate support common high-resolution audio sources, while 106 dB typical SNR helps preserve low-level program material. The implementation should include the manufacturer-recommended analog reconstruction or low-pass filtering and a suitable output buffer for the amplifier input. Because the SSOP package mixes digital and analog functions, ground partitioning, short output paths, and controlled return-current routing are central to avoiding audible interference.

🎚️

Digital Mixing Console

The PCM1781DBQ is suitable for a digital mixing console or line-level signal processor requiring two high-resolution analog outputs. Its enhanced multilevel delta-sigma architecture is designed for improved dynamic performance and better clock-jitter tolerance, both valuable when multiple digital sources converge on a mixer bus. The 106 dB typical SNR and 0.002% typical THD+N support low-noise conversion of program material. For a multi-channel mixer, multiple converter sections can be synchronized around a common low-jitter clock. PCB partitioning should keep each converter’s digital input and analog output away from neighboring channels to minimize crosstalk and ground coupling.

🚗

Automotive Infotainment Audio

PCM1781DBQ can support a compact automotive infotainment audio path when its electrical and environmental requirements satisfy the vehicle program. The two-channel 24-bit converter supports a nominal 192 kHz sampling rate and rates up to 200 kHz, while 106 dB typical SNR is appropriate for reproducing navigation prompts, radio audio, and other cabin sounds. The 16-lead SSOP footprint supports conventional surface-mount assembly, and four control pins simplify fixed operating-mode configuration. In an automotive board, isolate converter clocks from other digital timing sources, use a quiet 5 V rail, and validate analog output filtering against the amplifier, loudspeaker impedance, and system-level EMC requirements.

🎛️

Digital Audio Interface

The PCM1781DBQ can form the stereo monitoring-output section of a digital audio interface. Its 192 kHz nominal sampling rate and 200 kHz maximum accommodate high-resolution playback paths, while the 24-bit conversion resolution and 106 dB typical SNR provide transparent monitoring performance. The hardware control scheme is useful when the interface operates in a limited mode set, although PCM1782DBQ may be preferable when software-controlled configuration is required. Route the master clock and serial data as controlled-impedance digital nets, provide local supply bypass at the DAC, and place output filters close to the converter to minimize analog pickup and preserve the intended bandwidth.

📺

Consumer Audio Equipment

PCM1781DBQ suits compact consumer audio products that require two analog outputs from a digital source. Typical examples include network players, active speakers, CD player boards, and digital television audio output modules. The 4.5 V to 5.5 V operating range, 24-bit conversion, and 106 dB typical SNR support high-quality playback without the complexity of a multi-channel codec. Hardware control pins are advantageous in products with limited firmware because essential modes can be selected directly by the system controller. The output stage still requires careful design: use the recommended reconstruction network, provide a stable reference and decoupled supply, and maintain a quiet analog ground reference to avoid audible channel-to-channel interference.

Zusammenfassung der empfohlenen Produkte

What are the key specifications of PCM1781DBQ that engineers should know?
The PCM1781DBQ is a 24-bit stereo audio DAC with a 192 kHz nominal sampling rate, support up to 200 kHz, 106 dB typical SNR, and 0.002% typical THD+N. It operates from 4.5 V to 5.5 V and is packaged in a 16-lead SSOP. Texas Instruments describes the converter as a CMOS monolithic IC using an enhanced multilevel delta-sigma architecture, with four hardware control pins and two analog output channels.
Where can I download the PCM1781DBQ datasheet PDF?
The official PCM1781DBQ documentation is available through the Texas Instruments PCM1781 product page at https://www.ti.com/product/PCM1781. The product page provides the manufacturer data sheet and detailed ordering information for the DBQ package. Use the pin-description table, electrical characteristics, control-pin truth table, and recommended application circuit from that document when assigning PCB nets and validating signal timing.
Where can I find the PCM1781DBQ pinout and package information?
The PCM1781DBQ uses a 16-lead SSOP package, and the authoritative pin assignments are listed in the Texas Instruments PCM1781 data sheet. The package data identifies the DBQ configuration with 16 pins and includes the device terminal diagram, pin functions, and recommended footprint information. Compare those pin numbers with the physical component orientation and the package drawing before routing the digital interface, analog outputs, control pins, and supply connections.
What is the PCM1781DBQ used for?
The PCM1781DBQ is used to convert two channels of digital audio into analog stereo signals. Its 24-bit resolution, 192 kHz nominal sampling rate, and support for rates up to 200 kHz suit CD-class and higher-rate digital audio sources. Typical roles include sound-card outputs, powered-speaker DAC sections, digital mixers, audio interfaces, and consumer equipment requiring a compact two-channel conversion stage.
How does the PCM1781DBQ compare with PCM1780DBQ?
The PCM1781DBQ provides a subset of programmable functions through four hardware control pins, while the PCM1780DBQ uses a three-wire serial control port with register writes. Both are related 24-bit stereo delta-sigma converters in the 16-lead SSOP family. Because their control mechanisms differ, PCM1780DBQ is appropriate for a new serial-control design rather than an unmodified PCM1781DBQ control circuit.
How does the PCM1781DBQ compare with PCM1782DBQ?
The PCM1781DBQ uses four hardware control pins, whereas the PCM1782DBQ provides its programmable functions through a three-wire serial control port. Both devices belong to the same 24-bit stereo converter family and use the SSOP package. Choose PCM1781DBQ when direct hardware control is preferred, and choose PCM1782DBQ when a serial register interface offers more flexible configuration.
When should I choose PCM1781DBQ over PCM1780DBQ?
Choose PCM1781DBQ when the board needs a small set of stereo DAC settings controlled directly by hardware pins. Its four-control-pin interface can simplify designs that do not require a host-controlled register map. Choose PCM1780DBQ instead when software configuration through a three-wire serial port is needed. Existing PCM1781DBQ circuits should not be changed to PCM1780DBQ without reviewing the control logic and pin functions.
Is PCM1781DBQ suitable for high-fidelity stereo audio?
Yes, PCM1781DBQ is suitable for high-fidelity stereo conversion designs because it provides 24-bit resolution, 106 dB typical SNR, and 0.002% typical THD+N at a 5 V supply. Its enhanced multilevel delta-sigma architecture also improves clock-jitter tolerance. Actual system performance still depends on the digital source, clock quality, analog filtering, power supply, grounding, and output-stage implementation.
What can replace PCM1781DBQ?
The closest direct replacement is the PCM1781DBQG4, which retains the PCM1781 function and 16-lead SSOP footprint while adding the manufacturer’s G4 environmental or processing designation. PCM1780DBQ and PCM1782DBQ share the converter family and package but use a different three-wire serial control interface, so they are not unconditional substitutes for existing hardware-control firmware. Verify every pin, control state, and analog requirement before replacement.
What is the best Texas Instruments equivalent for PCM1781DBQ?
The PCM1781DBQG4 is the closest Texas Instruments equivalent identified for PCM1781DBQ because it retains the same converter family, 24-bit stereo architecture, and 16-lead SSOP package. The principal distinction is the G4 designation rather than a change in the core audio function. Board designers should still verify supply limits, control-pin defaults, environmental requirements, and the manufacturer’s latest ordering information.
Is PCM1781DBQ the same as PCM1781DBQR?
No, PCM1781DBQ and PCM1781DBQR have the same core converter function, but the orderable suffix identifies a different packaging or delivery configuration. PCM1781DBQ is the standard DBQ catalog entry, while PCM1781DBQR is a distinct orderable variant identified in distributor data. Treat the suffix as a purchasing and label-matching decision, and confirm reel, tape, or tube packing requirements before releasing an assembly order.
Where can I buy PCM1781DBQ online?
Use the Request a Quote form on this PCM1781DBQ page to request current availability, order quantity, and delivery terms for the exact DBQ ordering code. The form is the appropriate route for a quote-first purchase because inventory and lead time can change without notice. Confirm that the quotation identifies PCM1781DBQ, the 16-lead SSOP package, and the required component packaging before approval.
What is the price of PCM1781DBQ?
Current pricing for PCM1781DBQ is obtained through the Request a Quote form on this page rather than through a static price statement. Submit the required quantity, target package, and delivery destination to receive a current quotation. When requesting the quote, specify PCM1781DBQ exactly and confirm whether tube, tape-and-reel, or another approved delivery configuration is required by the assembly process.
What is the lead time for PCM1781DBQ?
The current lead time for PCM1781DBQ should be requested through the Request a Quote form on this page. Lead time can depend on order quantity, component packaging, production allocation, and destination, so it should be confirmed for the specific purchase order. Include the required quantity and assembly schedule in the request to obtain a useful delivery commitment.
Is PCM1781DBQ in stock?
PCM1781DBQ inventory should be checked through the Request a Quote form on this page because stock status changes with manufacturer supply and customer order volume. Provide the required quantity, target package, and delivery region when requesting the quotation. The response can then be evaluated against the production schedule rather than relying on a potentially outdated general stock indication.
How should PCM1781DBQ be decoupled and laid out on a PCB?
Follow the Texas Instruments PCM1781 data sheet and recommended application circuit for the exact capacitor values and connection topology. Place supply and ground bypass capacitors close to their associated device pins, route digital clock and data away from analog output traces, and keep the analog return path continuous. These measures reduce supply disturbance, clock-related conversion noise, and ground potential differences between the digital and analog sections.

Technische Referenzdaten für PCM1781DBQ – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose PCM1781DBQ for a new stereo audio design that needs 24-bit conversion, a 192 kHz nominal sampling rate, support up to 200 kHz, and direct hardware control through four pins. It is particularly suitable when the converter modes are known in advance and a host register interface would add unnecessary complexity. Choose PCM1781DBQG4 when the G4 environmental or processing designation is required for the end application. Consider PCM1780DBQ or PCM1782DBQ when a three-wire serial control port is preferable; both belong to the same converter family and package, but existing PCM1781DBQ hardware and firmware will require control-interface review. For designs requiring an independently adjustable full-scale output or a different filter configuration, compare those functional requirements with the exact family member rather than assuming that package compatibility alone guarantees equivalence.

Vergleich mit Alternativen

Parameter Dieses Produkt PCM1781DBQG4 PCM1780DBQ PCM1782DBQ PCM1780DBQG4 PCM1782DBQG4
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package SSOP-16 (DBQ) SSOP-16 (DBQ) SSOP-16 (DBQ) SSOP-16 (DBQ) SSOP-16 (DBQ) SSOP-16 (DBQ)
DAC Resolution 24 bit 24 bit 24 bit 24 bit 24 bit 24 bit
Nominal Sampling Rate 192 kHz 192 kHz 192 kHz 192 kHz 192 kHz 192 kHz
Maximum Sampling Rate 200 kHz 200 kHz 200 kHz 200 kHz 200 kHz 200 kHz
Signal-to-Noise Ratio 106 dB typical 106 dB typical 106 dB typical 106 dB typical 106 dB typical 106 dB typical
THD+N 0.002% typical 0.002% typical 0.002% typical 0.002% typical 0.002% typical 0.002% typical
Control Interface Four hardware control pins Four hardware control pins Three-wire serial control port Three-wire serial control port Three-wire serial control port Three-wire serial control port
Converter Architecture Enhanced multilevel delta-sigma Enhanced multilevel delta-sigma Enhanced multilevel delta-sigma Enhanced multilevel delta-sigma Enhanced multilevel delta-sigma Enhanced multilevel delta-sigma
Analog Output Channels 2 channels 2 channels 2 channels 2 channels 2 channels 2 channels

Wichtigste Unterscheidungsmerkmale

  • Simplified hardware-controlled operation (vs. PCM1782DBQ)
  • Direct same-family replacement with grade flexibility (vs. PCM1781DBQG4)
  • High-resolution stereo conversion in a compact package (vs. PCM1741EG4)

Designhinweise

Follow the Texas Instruments PCM1781 recommended application circuit for the exact bypass-capacitor values and placement. Position the supply bypass components directly beside the associated device pins and use a low-impedance ground connection. Keep the digital clock, serial data, and control traces away from the analog output nodes, particularly around the DAC outputs and external reconstruction network, to prevent switching current from appearing as analog output noise.

Partition the board so the PCM1781DBQ analog section has a continuous return path to the output amplifier or load. Avoid routing high-current return paths beneath the DAC or its analog filter components. Place output-filter and output-buffer components close to the converter pins, with symmetrical routing for the two stereo channels where channel matching matters. A clear digital-to-analog partition reduces ground bounce and helps preserve the device’s 106 dB typical SNR.

Provide a clean, low-jitter master clock because clock quality affects delta-sigma conversion even though the PCM1781DBQ architecture improves jitter tolerance. Use controlled-impedance routing for clock and serial-audio signals, provide return vias adjacent to high-speed traces, and avoid unnecessary stubs. Confirm input timing, data format, and clock ratios against the manufacturer data sheet before enabling the converters. Hardware control-pin states should also be defined during reset and power sequencing.

Do not treat PCM1780DBQ or PCM1782DBQ as firmware-compatible substitutes for PCM1781DBQ without reviewing their control architecture. The PCM1781 uses four hardware control pins, while the related devices use a three-wire serial control port. Likewise, do not substitute another PCM1781 orderable suffix without checking reel, tube, or tape packaging requirements. Validate the complete analog path, output loading, supply sequence, and control states during prototype testing.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The Texas Instruments product material and cited snippets do not explicitly state the requested environmental or material-compliance statuses.

Daten verifiziert am: 2026-11-20 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

PCM1781DBQ datasheet PCM1781DBQ pinout PCM1781DBQ datasheet pdf PCM1781DBQ equivalent PCM1781DBQ replacement PCM1781DBQ cross reference PCM1781DBQ vs PCM1780DBQ PCM1781DBQ vs PCM1782DBQ PCM1781DBQ footprint PCM1781DBQ price PCM1781DBQ stock Texas Instruments PCM1781DBQ PCM1781DBQ application circuit PCM1781 24-bit stereo DAC PCM1781DBQ SSOP-16 DAC

Verwandte Bauteile & Begriffe

Texas Instruments PCM1781DBQ PCM1781DBQG4 PCM1780DBQ PCM1782DBQ PCM1780DBQG4 PCM1782DBQG4 PCM1741EG4 Stereo audio DAC Digital-to-analog converter Audio converter Signal-conversion IC Delta-sigma converter Enhanced multilevel delta-sigma CMOS integrated circuit 24-bit resolution 192 kHz sampling rate 200 kHz maximum sampling rate 106 dB SNR 0.002% THD+N Hardware control pins Three-wire serial control port I2S digital audio interface SSOP-16 QFN family
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen