PCM1781DBQ - 24-Bit Stereo Audio DAC | Texas Instruments
Référence : PCM1781DBQ ✓ ActifPCM1781DBQ Présentation
An audio DAC is a digital-to-analog converter, a member of the broader signal-conversion and data-converter hierarchy. It reconstructs continuous analog audio from sampled digital data. The PCM1781 combines two converter channels with support circuitry in a monolithic CMOS integrated circuit, making it suitable for stereo sound cards, active speakers, digital mixers, consumer audio equipment, and embedded audio systems.
Key performance characteristics include 24-bit resolution, 106 dB typical SNR at a 5 V supply, and 0.002% typical THD+N. The converter accepts standard audio formats through its serial interface, while four hardware control pins provide a simplified configuration method. These characteristics are important for reducing quantization noise and maintaining low distortion in high-fidelity audio paths.
The device uses an enhanced multilevel delta-sigma architecture. This architecture improves dynamic performance and provides better tolerance to clock jitter than conventional delta-sigma converters. Texas Instruments identifies the PCM1780, PCM1781, and PCM1782 as a related CMOS family with different control-interface feature sets, allowing engineers to select the converter that matches their system architecture without changing the basic 16-lead SSOP footprint.
Typical applications include professional and consumer stereo audio equipment, powered speaker systems, digital mixing consoles, automotive infotainment systems, and audio interfaces requiring two analog outputs. The 16-lead SSOP package supports compact, surface-mount PCB layouts, although analog and digital return paths still require careful layout discipline.
For reliable performance, use the application circuit recommended by the manufacturer for supply decoupling, reference-voltage treatment, and analog output filtering. Keep the digital clock and data traces away from the analog outputs, provide adequate output-stage drive for the intended load, and verify headroom, filtering, and timing against the device data sheet before releasing a production design.
This product page combines the manufacturer specifications with practical selection guidance, interface analysis, drop-in family comparisons, application notes, and PCB design considerations. It focuses on the engineering distinctions that determine whether the PCM1781DBQ is suitable for a stereo audio conversion design.
Alternatives de remplacement direct pour PCM1781DBQ — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PCM1781DBQ (même facteur de forme et même empreinte) — différant par Control Interface, Digital Audio Interface, Package, Process Technology.
PCM1781DBQG4
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
PCM1780DBQ
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
PCM1782DBQ
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →PCM1780DBQG4
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
PCM1782DBQG4
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
PCM1781DBQ Valeurs maximales et caractéristiques électriques
| Résolution | 24 bit |
| Nominal Sampling Rate | 192 kHz |
| Maximum Sampling Rate | 200 kHz |
| Signal-to-Noise Ratio | 106 dB typical at 5 V |
| THD+N | 0.002% typical |
| Converter Architecture | Enhanced multilevel delta-sigma |
| Number of DAC Channels | 2 channels |
| Number of Analog Outputs | 2 outputs |
| Supply Voltage Range | 4.5 V to 5.5 V |
| Nominal Supply Voltage | 5 V |
| Control Interface | Four hardware control pins |
| Digital Audio Interface | Industry-standard serial audio data interface |
| Process Technology | CMOS |
| Boîtier | 16-lead SSOP (DBQ) |
| Type de montage | Surface mount |
| Nombre de broches | 16 pins |
Guide de configuration des broches du PCM1781DBQ 16-lead ssop (dbq)
Configuration des broches du PCM1781DBQ (boîtier 16-lead ssop (dbq)). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour PCM1781DBQ.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
PCM1781DBQ convient pour 6 applications: Stereo Sound-Card Output, Powered Speaker DAC Section, Digital Mixing Console, Automotive Infotainment Audio, Digital Audio Interface, Consumer Audio Equipment.
Stereo Sound-Card Output
The PCM1781DBQ fits a two-channel PC sound-card output because it converts digital audio into left and right analog signals at 24-bit resolution, with 192 kHz nominal sampling and support up to 200 kHz. Its 106 dB typical SNR and 0.002% typical THD+N provide a suitable performance baseline for music playback and general multimedia equipment. Place the DAC close to the line-output connector, decouple the 5 V supply locally, and keep digital bus routing away from the analog outputs. The four hardware control pins can configure the converter without a host-driven register interface, simplifying designs where the required operating modes are known at power-up.
Recommandé
Powered Speaker DAC Section
A powered speaker can use the PCM1781DBQ to generate analog stereo signals before amplification, avoiding a digital transport through the speaker wiring. The converter’s two output channels, 24-bit resolution, and 200 kHz maximum sampling rate support common high-resolution audio sources, while 106 dB typical SNR helps preserve low-level program material. The implementation should include the manufacturer-recommended analog reconstruction or low-pass filtering and a suitable output buffer for the amplifier input. Because the SSOP package mixes digital and analog functions, ground partitioning, short output paths, and controlled return-current routing are central to avoiding audible interference.
Recommandé
Digital Mixing Console
The PCM1781DBQ is suitable for a digital mixing console or line-level signal processor requiring two high-resolution analog outputs. Its enhanced multilevel delta-sigma architecture is designed for improved dynamic performance and better clock-jitter tolerance, both valuable when multiple digital sources converge on a mixer bus. The 106 dB typical SNR and 0.002% typical THD+N support low-noise conversion of program material. For a multi-channel mixer, multiple converter sections can be synchronized around a common low-jitter clock. PCB partitioning should keep each converter’s digital input and analog output away from neighboring channels to minimize crosstalk and ground coupling.
Recommandé
Automotive Infotainment Audio
PCM1781DBQ can support a compact automotive infotainment audio path when its electrical and environmental requirements satisfy the vehicle program. The two-channel 24-bit converter supports a nominal 192 kHz sampling rate and rates up to 200 kHz, while 106 dB typical SNR is appropriate for reproducing navigation prompts, radio audio, and other cabin sounds. The 16-lead SSOP footprint supports conventional surface-mount assembly, and four control pins simplify fixed operating-mode configuration. In an automotive board, isolate converter clocks from other digital timing sources, use a quiet 5 V rail, and validate analog output filtering against the amplifier, loudspeaker impedance, and system-level EMC requirements.
Recommandé
Digital Audio Interface
The PCM1781DBQ can form the stereo monitoring-output section of a digital audio interface. Its 192 kHz nominal sampling rate and 200 kHz maximum accommodate high-resolution playback paths, while the 24-bit conversion resolution and 106 dB typical SNR provide transparent monitoring performance. The hardware control scheme is useful when the interface operates in a limited mode set, although PCM1782DBQ may be preferable when software-controlled configuration is required. Route the master clock and serial data as controlled-impedance digital nets, provide local supply bypass at the DAC, and place output filters close to the converter to minimize analog pickup and preserve the intended bandwidth.
Recommandé
Consumer Audio Equipment
PCM1781DBQ suits compact consumer audio products that require two analog outputs from a digital source. Typical examples include network players, active speakers, CD player boards, and digital television audio output modules. The 4.5 V to 5.5 V operating range, 24-bit conversion, and 106 dB typical SNR support high-quality playback without the complexity of a multi-channel codec. Hardware control pins are advantageous in products with limited firmware because essential modes can be selected directly by the system controller. The output stage still requires careful design: use the recommended reconstruction network, provide a stable reference and decoupled supply, and maintain a quiet analog ground reference to avoid audible channel-to-channel interference.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PCM1781DBQ — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PCM1781DBQG4 | PCM1780DBQ | PCM1782DBQ | PCM1780DBQG4 | PCM1782DBQG4 |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | SSOP-16 (DBQ) | SSOP-16 (DBQ) | SSOP-16 (DBQ) | SSOP-16 (DBQ) | SSOP-16 (DBQ) | SSOP-16 (DBQ) |
| DAC Resolution | 24 bit | 24 bit | 24 bit | 24 bit | 24 bit | 24 bit |
| Nominal Sampling Rate | 192 kHz | 192 kHz | 192 kHz | 192 kHz | 192 kHz | 192 kHz |
| Maximum Sampling Rate | 200 kHz | 200 kHz | 200 kHz | 200 kHz | 200 kHz | 200 kHz |
| Signal-to-Noise Ratio | 106 dB typical | 106 dB typical | 106 dB typical | 106 dB typical | 106 dB typical | 106 dB typical |
| THD+N | 0.002% typical | 0.002% typical | 0.002% typical | 0.002% typical | 0.002% typical | 0.002% typical |
| Control Interface | Four hardware control pins | Four hardware control pins | Three-wire serial control port | Three-wire serial control port | Three-wire serial control port | Three-wire serial control port |
| Converter Architecture | Enhanced multilevel delta-sigma | Enhanced multilevel delta-sigma | Enhanced multilevel delta-sigma | Enhanced multilevel delta-sigma | Enhanced multilevel delta-sigma | Enhanced multilevel delta-sigma |
| Analog Output Channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels |
Principaux différenciateurs
- Simplified hardware-controlled operation (vs PCM1782DBQ)
- Direct same-family replacement with grade flexibility (vs PCM1781DBQG4)
- High-resolution stereo conversion in a compact package (vs PCM1741EG4)
Notes de conception
Follow the Texas Instruments PCM1781 recommended application circuit for the exact bypass-capacitor values and placement. Position the supply bypass components directly beside the associated device pins and use a low-impedance ground connection. Keep the digital clock, serial data, and control traces away from the analog output nodes, particularly around the DAC outputs and external reconstruction network, to prevent switching current from appearing as analog output noise.
Partition the board so the PCM1781DBQ analog section has a continuous return path to the output amplifier or load. Avoid routing high-current return paths beneath the DAC or its analog filter components. Place output-filter and output-buffer components close to the converter pins, with symmetrical routing for the two stereo channels where channel matching matters. A clear digital-to-analog partition reduces ground bounce and helps preserve the device’s 106 dB typical SNR.
Provide a clean, low-jitter master clock because clock quality affects delta-sigma conversion even though the PCM1781DBQ architecture improves jitter tolerance. Use controlled-impedance routing for clock and serial-audio signals, provide return vias adjacent to high-speed traces, and avoid unnecessary stubs. Confirm input timing, data format, and clock ratios against the manufacturer data sheet before enabling the converters. Hardware control-pin states should also be defined during reset and power sequencing.
Do not treat PCM1780DBQ or PCM1782DBQ as firmware-compatible substitutes for PCM1781DBQ without reviewing their control architecture. The PCM1781 uses four hardware control pins, while the related devices use a three-wire serial control port. Likewise, do not substitute another PCM1781 orderable suffix without checking reel, tube, or tape packaging requirements. Validate the complete analog path, output loading, supply sequence, and control states during prototype testing.
Informations de conformité
The Texas Instruments product material and cited snippets do not explicitly state the requested environmental or material-compliance statuses.