PIC16F15243-E/P - 8-bit 32MHz 3.5KB Flash MCU | Microchip
Teilenummer: PIC16F15243-E/P ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $0.92 | $0,92 |
| 10 | $0.83 | $8,30 |
| 100 | $0.74 | $74,00 |
| 500 | $0.66 | $330,00 |
| 1.000 | $0.58 | $580,00 |
| 3.000 | $0.49 | $1.470,00 |
PIC16F15243-E/P Übersicht
A microcontroller (MCU) is a single-chip computer that combines a CPU core, non-volatile program memory, RAM, and a set of on-chip peripherals such as timers, ADCs, and communication interfaces. PIC microcontrollers use a RISC-based Harvard architecture; the PIC16F152xx family extends the enhanced mid-range core with 49 instructions, 16 stack levels, peripheral pin select (PPS) remapping, and a functional-safety-capable design pattern. The PIC16F15243-E/P specifically targets applications that need this baseline at minimum cost.
Key features include one 10-bit ADC, two PWM channels, two CCP modules, hardware limiting timer (HLT), windowed watchdog timer (WDT), PPS, EUSART, and MSSP supporting SPI/I2C. The wide 1.8V-5.5V supply range permits direct operation from a single Li-ion cell or 5V regulated rail, while XLP sleep enables nanoWatt standby for battery-backed nodes.
The device uses an enhanced mid-range 8-bit core with self-programmable Flash, ICD debugging support, and a vectored interrupt controller. Compared with the older PIC16F1xx baseline, the 15243 adds PPS routing, an on-chip 32 MHz HFINTOSC with hardware limiting, and faster ADC acquisition, reducing external component count in sensor and motor-control designs.
Typical applications include consumer appliance control, low-cost sensor nodes, LED lighting controllers, battery-powered IoT edge devices, and PIC16F45 pin-compatible upgrades. Industrial segments include HVAC auxiliary controllers and simple human-machine interface boards that do not require USB or CAN.
When designing with the PIC16F15243-E/P, ensure MPLAB X IDE and XC8 compiler are used, allocate at least one PPS pin for serial debug, and respect the 5.5V absolute-maximum VDD limit. Decouple VDD with 100nF plus 10uF bulk capacitance placed within 5 mm of the supply pin.
This page synthesizes distributor pricing, drop-in PIC16F152xx alternatives, and practical MPLAB/XC8 design notes not found in the standalone datasheet.
Drop-in-Alternativen für PIC16F15243-E/P – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PIC16F15243-E/P (gleiche Bauform und Footprint) – abweichend in Package, Program Memory (Flash), Operating Temperature, Mounting Type, Core Architecture.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
PIC16F15244-I/P
✅ Drop-In✓ Auf Lager
$0.72 / Stück
Datenblatt ansehen →PIC16F15245-I/P
✅ Drop-In✓ Auf Lager
$0.81 / Stück
Datenblatt ansehen →PIC16F15223-I/P
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
PIC16F15224-I/P
✅ Drop-In✓ Auf Lager
$0.78 / Stück
Datenblatt ansehen →PIC16F15213-E/P
✅ Drop-In✓ Auf Lager
$0.48 / Stück
Datenblatt ansehen →PIC16F15214-I/P
✅ Drop-In✓ Auf Lager
$0.76 / Stück
Datenblatt ansehen →PIC16F15243-E/P Grenzwerte & elektrische Eigenschaften
| Core Architecture | PIC16 Enhanced Mid-Range 8-bit RISC |
| Program Memory (Flash) | 3.5 KB (2K x 14) |
| Data Memory (SRAM) | 256 bytes |
| Maximum CPU Clock | 32 MHz |
| Operating Voltage Range | 1.8 V to 5.5 V |
| Gehäuse | 20-pin PDIP (P) |
| Montageart | Through-Hole |
| ADC | 10-bit, 1 module |
| PWM Channels | 2 |
| CCP Modules | 2 |
| Communication | EUSART (UART), MSSP (SPI/I2C) |
| Timers | HLT (Hardware Limiting Timer), WDT (Windowed Watchdog) |
| Peripheral Pin Select (PPS) | Yes |
| Low-Power Mode | XLP eXtreme Low-Power Sleep |
| Betriebstemperatur | -40C to +125C (E = Extended) |
| Instruction Set | 49 instructions, 16 stack levels |
| RoHS-Status | Compliant |
| Debug Support | ICD / ICSP |
PIC16F15243-E/P Pin-Konfiguration
| Pin 1 | VDD — Positive supply voltage (1.8V to 5.5V) |
| Pin 2 | RA5 — Bidirectional I/O with interrupt, analog input, PPS-able |
| Pin 3 | RA4 — Bidirectional I/O with interrupt, analog input |
| Pin 4 | RA3/MCLR — Input only or Master Clear (reset) input |
| Pin 5 | RC5 — Bidirectional I/O, analog input, PPS-able |
| Pin 6 | RC4 — Bidirectional I/O, analog input, PPS-able |
| Pin 7 | RC3 — Bidirectional I/O, analog input, PPS-able |
| Pin 8 | RC6 — Bidirectional I/O, PPS-able, EUSART CTS optional |
| Pin 9 | RC7 — Bidirectional I/O, PPS-able, EUSART RTS optional |
| Pin 10 | RB7 — Bidirectional I/O, I2C SCL (PPS), programming clock |
| Pin 11 | RB6 — Bidirectional I/O, I2C SDA (PPS), programming data |
| Pin 12 | RB5 — Bidirectional I/O, analog input, PPS-able |
| Pin 13 | RB4 — Bidirectional I/O, analog input, PPS-able |
| Pin 14 | RC2 — Bidirectional I/O, analog input, PPS-able |
| Pin 15 | RC1 — Bidirectional I/O, analog input, CCP2 optional, PPS-able |
| Pin 16 | RC0 — Bidirectional I/O, analog input, CCP1 optional, PPS-able |
| Pin 17 | RA2 — Bidirectional I/O with interrupt, analog input, DAC ref |
| Pin 18 | RA1 — Bidirectional I/O with interrupt, analog input, DAC output |
| Pin 19 | RA0 — Bidirectional I/O with interrupt, analog input |
| Pin 20 | VSS — Ground reference |
Typische Anwendungen
PIC16F15243-E/P ist geeignet für 6 Anwendungs: Consumer Appliance Control, Battery-Powered IoT Sensor Node, LED Lighting Controller, HVAC Auxiliary Controller, Low-Cost Human-Machine Interface, Functional Safety (FuSa) Subsystem.
Consumer Appliance Control
The PIC16F15243-E/P fits consumer appliance control (small kitchen, white-goods sub-modules) because it integrates 2 PWM and 2 CCP channels sufficient to drive a brushed motor, triac, or relay while running a small UI task loop. With 3.5 KB Flash and 256 B SRAM it hosts a foreground/background scheduler plus a UART command parser for the appliance bus. The 1.8-5.5 V supply range lets it share a 3.3 V or 5 V rail with the main SoC, and the XLP nanoWatt sleep drops quiescent current for Energy-Star standby compliance. PPS reassigns EUSART to free pins, easing single-layer PCB layouts where front-panel connectors are far from the MCU. Estimated: a 4-relay / 2-indicator design fits in roughly 60% of Flash with XC8 -pro optimization.
Empfohlen
Battery-Powered IoT Sensor Node
For battery-powered IoT sensor nodes, the PIC16F15243-E/P combines XLP eXtreme Low-Power Sleep with a 10-bit ADC and an MSSP capable of SPI/I2C sensor polling, all in a 20-pin PDIP for hand-solderable prototypes. The 32 MHz HFINTOSC wakes the MCU in microseconds, executes a sensor read, transmits via EUSART or SPI, and re-enters sleep with brown-out reset protection. Estimated standby current of <100 nA at 2 V VDD extends CR2032 lifetime past one year at hourly wake. PPS remaps the SPI bus to free GPIOs so multiple sensor breakouts share one PCB footprint without wire rework.
Empfohlen
LED Lighting Controller
In LED lighting controllers, the PIC16F15243-E/P delivers 2 PWM channels and a 10-bit ADC suitable for closed-loop current or color-temperature control of constant-current LED strings. Running from a 5 V or 12 V post-regulator rail, the MCU reads a photodiode or NTC thermistor via ADC, adjusts PWM duty, and reports status over UART or DALI bridge. The 32 MHz instruction rate keeps PWM resolution high at low frequency for flicker-free dimming. XLP sleep is useful for off-state standby per Energy Star and EU ecodesign standby targets. The wide -40C to +125C extended operating range supports outdoor luminaires.
Empfohlen
HVAC Auxiliary Controller
For HVAC auxiliary controllers (fan-speed boards, damper actuators, zone sensors), the PIC16F15243-E/P provides EUSART for BACnet MS/TP or Modbus slave communication, plus MSSP for local I2C sensor expansion. The MSSP/I2C can host temperature, humidity, and pressure sensors while the EUSART exposes the board to a building automation controller. XLP sleep combined with windowed WDT enables robust unattended operation. PPS routing simplifies board layout by relocating the EUSART TX/RX to convenient header pins. The -40C to +125C temperature grade matches rooftop or basement equipment environments.
Empfohlen
Low-Cost Human-Machine Interface
For simple human-machine interface boards (keypads, encoder + LCD sub-boards), the PIC16F15243-E/P reads up to 14 GPIOs with interrupt-on-change support, drives an LCD or LED bar via PWM, and exposes EUSART to a host controller. PPS lets the designer place UART pins on any free I/O to simplify the front-panel flex routing. The enhanced mid-range core supports a small event-driven UI without an RTOS, and 256 B SRAM holds button debounce state and a small display buffer. The 20-pin PDIP is breadboard-friendly for prototype iteration before moving to an SOIC or QFN in volume.
Empfohlen
Functional Safety (FuSa) Subsystem
The PIC16F15243 belongs to Microchip's PIC16F152xx functional safety (FuSa) family, suitable for safety-related sub-systems requiring documentation, lockable Flash, and watchdog supervision. The hardware limiting timer (HLT) and windowed WDT enable independent channel supervision of a primary MCU, while PPS and EUSART route fail-safe telemetry to the host. This makes the part a good fit for low-cost safety islands in appliance, motor-control, and medical-class II devices where redundant supervision is required but cost ceiling is tight.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PIC16F15243-E/P – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PIC16F15244-I/P | PIC16F15245-I/P | PIC16F15223-I/P | PIC16F15224-I/P | PIC16F15213-E/P | PIC16F15214-I/P |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-pin PDIP (P) | 20-pin PDIP (P) - same | 20-pin PDIP (P) - same | 20-pin PDIP (P) - same | 20-pin PDIP (P) - same | 20-pin PDIP (P) - same | 20-pin PDIP (P) - same |
| Flash Memory | 3.5 KB | 7 KB | 14 KB | 3.5 KB | 7 KB | 3.5 KB | 7 KB |
| SRAM | 256 B | 512 B | 1024 B | 128 B | 256 B | 256 B | 256 B |
| Max CPU Clock | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| ADC | 10-bit, 1 module | 10-bit, 1 module | 10-bit, 1 module | 10-bit, 1 module | 10-bit, 1 module | 10-bit, 1 module | 10-bit, 1 module |
| PWM Channels | 2 | 2 | 4 | 2 | 2 | 2 | 2 |
| Operating Voltage | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V |
| Temperature Grade | Extended (-40C to +125C) | Industrial (-40C to +85C) | Industrial (-40C to +85C) | Industrial (-40C to +85C) | Industrial (-40C to +85C) | Extended (-40C to +125C) | Industrial (-40C to +85C) |
Wichtigste Unterscheidungsmerkmale
- Lowest-cost 32 MHz 3.5 KB Flash in PIC16F152xx family (vs. PIC16F15244-I/P)
- Higher SRAM than 15223 with same Flash (vs. PIC16F15223-I/P)
- Extended temperature grade (-40C to +125C) (vs. PIC16F15244-I/P)
Designhinweise
Decouple VDD (pin 1) with a 100 nF X7R ceramic placed within 5 mm of the pin plus a bulk 10 uF aluminum-polymer or ceramic on the same rail. The PIC16F15243-E/P has a 1.8-5.5 V supply window; do not exceed 5.5 V or device latch-up may occur. Estimated: at 32 MHz CPU + active ADC + EUSART, average IDD is roughly 4 mA, so a 10 uF bulk supports >2 ms of transient headroom without sagging.
Route ICSPDAT/ICSPCLK to RB6/RB7 as a 2-pin header for in-circuit serial programming, even on production boards, to allow field firmware updates and debug. Use PPS to remap EUSART TX/RX away from RB6/RB7 to free the ICSP pins. Place the MCLR pull-up (typically 10 kohm) close to pin 4 and avoid long traces that pick up ESD.
PPS allows remapping of digital peripherals to almost any I/O. When using I2C on RB6/RB7, enable the internal weak pull-ups only for low-speed (<100 kHz) buses; for 400 kHz Fast-Mode, use external 2.2-4.7 kohm pull-ups to meet rise-time spec. Place I2C pull-ups within 50 mm of the MCU to avoid ringing.
Do not leave MCLR floating - tie it to VDD through a 10 kohm resistor or drive it actively. The PIC16F15243-E/P has only 3.5 KB Flash; budget ~600 bytes for the XC8 runtime + interrupt vector table, leaving ~2.9 KB for application code. Enable the windowed WDT in long-running unattended designs to recover from stuck firmware states.
Compliance-Informationen
RoHS and REACH compliance per Microchip product environmental compliance disclosures. Not AEC-Q100 qualified - choose automotive-grade PIC16F counterparts if required. Pb-free and halogen-free per Microchip packaging specifications.