PIC16F1719-I/MV - 28KB Flash 8-Bit MCU, 40-UQFN | Microchip
Teilenummer: PIC16F1719-I/MV ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $2.95 | $2,95 |
| 10 | $2.66 | $26,60 |
| 100 | $2.36 | $236,00 |
| 500 | $2.13 | $1.065,00 |
| 1.000 | $1.89 | $1.890,00 |
PIC16F1719-I/MV Übersicht
A microcontroller (MCU) is a single-chip computer containing a CPU, Flash program memory, SRAM, and a rich set of peripherals (ADC, timers, communication interfaces). PIC microcontrollers are based on a modified Harvard RISC architecture optimized for deterministic, low-power embedded control. The PIC16F1719 sits within Microchip's mid-range MCU portfolio: PIC (family) -> PIC16 (sub-family) -> PIC16F1719 (device) -> 8-bit microcontroller -> embedded MCU -> semiconductor IC.
Key features include up to 32 MHz CPU speed, 28KB self-programmable Flash with 16K x 14 word organization, 2KB RAM, 256B EEPROM, two operational amplifiers, one 10-bit ADC, two 5-bit and one 8-bit DAC, Enhanced PWM, multiple communication peripherals (EUSART, I2C, SPI), and Microchip's eXtreme Low Power (XLP) technology. Voltage operation is 2.3V to 5.5V for the LF variant; the F variant operates up to 5.5V.
The device uses a 14-bit instruction word and 8-bit data path with a hardware multiplier, enabling efficient C and assembly code generation. The on-chip op amps and 10-bit ADC with automated Capacitive Voltage Divider (CVD) make it well suited for sensor interfaces, while CLC and NCO support generation of custom waveforms and high-resolution timing without CPU intervention.
Typical applications include sensor signal conditioning, LED lighting control, low-power IoT nodes, household appliances, and general-purpose embedded control. The PIC16F1719 also fits battery-powered designs thanks to XLP sleep currents in the microamp range.
When designing with this MCU, reserve the exposed pad (EP) as a thermal/ground bond - the UQFN EP must be soldered to a sufficient copper pour for electrical and thermal performance. Choose the LF (PIC16LF1719) variant if you must operate below 2.3V.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
Drop-in-Alternativen für PIC16F1719-I/MV – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PIC16F1719-I/MV (gleiche Bauform und Footprint) – abweichend in Package, ADC, Comparators, Core Architecture, DAC.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
PIC16F1719-E/MV
✅ Drop-In✓ Auf Lager
$2.75 / Stück
Datenblatt ansehen →PIC16F1719T-I/MV
✅ Drop-In✓ Auf Lager
$1.78 / Stück
Datenblatt ansehen →PIC16F1718-I/MV
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
PIC16F1717-I/MV
✅ Drop-In✓ Auf Lager
$1.72 / Stück
Datenblatt ansehen →PIC16LF1719-E/MV
✅ Drop-In✓ Auf Lager
$1.85 / Stück
Datenblatt ansehen →PIC16F1719-I/MV Grenzwerte & elektrische Eigenschaften
| Core Architecture | 8-bit PIC (modified Harvard RISC) |
| Instruction Set | 14-bit, 49 instructions |
| Program Memory (Flash) | 28 KB (16K x 14 words) |
| Data SRAM | 2 KB |
| Data EEPROM | 256 B |
| Maximum CPU Speed | 32 MHz |
| Operating Voltage Range | 2.3 V to 5.5 V |
| I/O Pins | 36 (approx., varies with package) |
| Gehäuse | 40-pin UQFN (5x5 mm) with Exposed Pad |
| Montageart | Surface Mount |
| ADC | 10-bit, up to 28 channels |
| DAC | Two 5-bit and one 8-bit DAC |
| On-chip Operational Amplifiers | 2 |
| Core Independent Peripherals | CLC, COG, NCO, ZCD, PPS |
| Communication Interfaces | EUSART, I2C, SPI |
| PWM | Enhanced PWM (ECCP + CCP) |
| Temperature Range (Industrial -I) | -40 C to +85 C |
| XLP (eXtreme Low Power) | Yes - sleep current in uA/nA range |
| RoHS-Status | Compliant |
PIC16F1719-I/MV Pin-Konfiguration
| Pin 1 | RA0 — Analog/Digital I/O with op-amp output |
| Pin 2 | RA1 — Analog/Digital I/O with op-amp inverting input |
| Pin 3 | RA2 — Analog/Digital I/O with op-amp non-inverting input |
| Pin 4 | RA3 — Analog/Digital I/O |
| Pin 5 | RA4 — Digital I/O / Timer0 clock input |
| Pin 6 | RA5 — Analog/Digital I/O |
| Pin 7 | RA6 — Digital I/O / Oscillator output |
| Pin 8 | RA7 — Digital I/O / Oscillator input |
| Pin 9 | VSS — Ground reference |
| Pin 10 | VDD — Positive supply voltage |
| Pin 11 | RB0 — Digital I/O / Interrupt-on-change |
| Pin 12 | RB1 — Digital I/O / Interrupt-on-change |
| Pin 13 | RB2 — Digital I/O / Interrupt-on-change |
| Pin 14 | RB3 — Digital I/O / Interrupt-on-change |
| Pin 15 | RB4 — Digital I/O / Interrupt-on-change |
| Pin 16 | RB5 — Digital I/O / Interrupt-on-change |
| Pin 17 | RB6 — Digital I/O / ICDCLK |
| Pin 18 | RB7 — Digital I/O / ICDDAT |
| Pin 19 | RC0 — Digital I/O |
| Pin 20 | RC1 — Digital I/O |
| Pin 21 | RC2 — Digital I/O |
| Pin 22 | RC3 — Digital I/O / SCL (PPS) |
| Pin 23 | RC4 — Digital I/O / SDA (PPS) |
| Pin 24 | RC5 — Digital I/O |
| Pin 25 | RC6 — Digital I/O / TX (EUSART) |
| Pin 26 | RC7 — Digital I/O / RX (EUSART) |
| Pin 27 | RE3 — Digital I/O / MCLR (with internal pull-up) |
| Pin 28 | RD0 — Digital I/O |
| Pin 29 | RD1 — Digital I/O |
| Pin 30 | RD2 — Digital I/O |
| Pin 31 | RD3 — Digital I/O |
| Pin 32 | RD4 — Digital I/O |
| Pin 33 | RD5 — Digital I/O |
| Pin 34 | RD6 — Digital I/O |
| Pin 35 | RD7 — Digital I/O |
| Pin 36 | AVSS — Analog ground |
| Pin 37 | AVDD — Analog positive supply |
| Pin 38 | RE0 — Analog/Digital I/O |
| Pin 39 | RE1 — Analog/Digital I/O |
| Pin 40 | RE2 — Analog/Digital I/O |
Typische Anwendungen
PIC16F1719-I/MV ist geeignet für 6 Anwendungs: Low-Power IoT Sensor Nodes, Sensor Signal Conditioning, LED Lighting Control, Household Appliance Control, Battery-Powered Wearable Devices, Industrial Control Modules.
Low-Power IoT Sensor Nodes
The PIC16F1719-I/MV fits battery-powered IoT sensor nodes by combining 28KB Flash for over-the-air update logic with XLP (eXtreme Low Power) sleep currents in the nanoamp range. Its 10-bit ADC with CVD (Capacitive Voltage Divider) supports touch/proximity wake-up events, and the NCO plus CLC peripherals generate timing-critical waveforms without CPU intervention, allowing the core to remain in sleep for extended periods.
Empfohlen
Sensor Signal Conditioning
On-chip operational amplifiers, a 10-bit ADC, and 5/8-bit DACs make the PIC16F1719-I/MV well suited for analog sensor signal conditioning without external op-amp ICs. The integrated op amps can buffer and amplify low-level sensor outputs (thermocouples, RTDs, strain gauges) while the ADC's hardware CVD supports capacitive touch and level sensing. This eliminates 2-3 external analog ICs and reduces BOM cost in industrial sensor modules.
Empfohlen
LED Lighting Control
The PIC16F1719-I/MV drives multi-channel LED lighting systems using its Enhanced PWM (ECCP) modules and 8-bit DAC for smooth dimming. The NCO (Numerically Controlled Oscillator) and CLC (Configurable Logic Cell) offload fade math and PWM-dithering tasks from the CPU, freeing cycles for communication stacks like DMX or DALI. Current consumption in idle states stays low enough for always-on lighting fixtures with standby power budgets under 0.5 W.
Empfohlen
Household Appliance Control
The PIC16F1719-I/MV handles motor, valve, and user-interface control in white goods such as washing machines, dishwashers, and refrigerators. With 32 MHz CPU speed, Enhanced PWM for motor drive, EUSART/I2C/SPI for HMI communication, and on-chip op amps for analog sensor interfaces, the MCU consolidates multiple functions onto a single device. The 40-pin UQFN footprint simplifies layout and the wide 2.3V-5.5V range covers both 3.3V logic and 5V analog sensor rails.
Empfohlen
Battery-Powered Wearable Devices
The PIC16F1719-I/MV suits fitness bands and wearable health monitors thanks to its XLP technology, which keeps sleep current in the nanoamp range while peripheral modules run autonomously. The 10-bit ADC acquires heart-rate or motion sensor data, CLC and NCO offload timing-critical filtering, and PPS reassigns peripherals to alternate pins to optimize PCB layout under tight mechanical constraints. The compact 40-pin UQFN (5x5 mm) fits small form factors.
Empfohlen
Industrial Control Modules
The PIC16F1719-I/MV is suitable for industrial control modules requiring on-board analog signal conditioning plus digital communication. The integrated op amps interface directly with 4-20 mA current loops and bridge sensors, while EUSART and I2C peripherals connect to RS-485 transceivers or local HMI displays. The industrial-grade -40C to +85C temperature range (E grade extends to +125C) ensures operation in factory automation environments.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PIC16F1719-I/MV – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PIC16F1719-E/MV | PIC16F1719T-I/MV | PIC16F1718-I/MV | PIC16F1717-I/MV | PIC16LF1719-E/MV |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 40-pin UQFN (5x5) | 40-pin UQFN (5x5) - same | 40-pin UQFN (5x5) - same | 40-pin UQFN (5x5) - same | 40-pin UQFN (5x5) - same | 40-pin UQFN (5x5) - same |
| Flash Memory | 28 KB | 28 KB | 28 KB | 16 KB | 14 KB | 28 KB |
| RAM | 2 KB | 2 KB | 2 KB | 1 KB | 1 KB | 2 KB |
| Operating Voltage | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 1.8 V to 3.6 V |
| Temperature Grade | Industrial -40C to +85C | Extended -40C to +125C | Industrial -40C to +85C | Industrial -40C to +85C | Industrial -40C to +85C | Extended -40C to +125C |
| CPU Speed | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| On-chip Op Amps | 2 | 2 | 2 | 2 | 2 | 2 |
| RoHS | Compliant | Compliant | Compliant | Compliant | Compliant | Compliant |
Wichtigste Unterscheidungsmerkmale
- Higher Flash and RAM than the PIC16F1718 (vs. PIC16F1718-I/MV)
- Extended temperature range variant available (vs. PIC16F1719-E/MV)
- Wider operating voltage range than the LF variant (vs. PIC16LF1719-E/MV)
Designhinweise
The 40-pin UQFN package has a large central exposed pad that must be soldered to a sufficient PCB ground copper pour (recommended minimum 1 sq inch continuous ground plane). Leaving the EP unsoldered can cause thermal stress, electrical discontinuities, and EMI degradation. Add multiple thermal vias under the EP to improve heat dissipation and reduce ground impedance for the analog blocks.
Place 100 nF decoupling capacitors as close as possible to every VDD/AVDD pin and a single bulk capacitor (e.g., 10 uF) near the MCU. The PIC16F1719 has separate analog (AVDD/AVSS) and digital (VDD/VSS) supply pins to reduce digital switching noise coupling into the ADC; tie AVDD to VDD via a small ferrite bead or filter if high-precision ADC readings are required. Use PPS to remap peripherals to pins away from high-frequency switching traces.
The PIC16F1719-F (non-LF) variant is rated 2.3V to 5.5V; operating below 2.3V will cause Flash read errors and ADC inaccuracy. If the design runs from a 1.8V rail, use the PIC16LF1719 instead. Also note that the MCLR pin (RE3) is input-only on this family and has an internal pull-up enabled by configuration bits; leave it disconnected if not used for in-circuit programming.
Compliance-Informationen
RoHS and REACH compliance per Microchip product page. AEC-Q100 automotive grade not qualified - select automotive-grade PIC16 variants for automotive applications. Conflict-minerals statement available from Microchip.
