Microchip Technology

PIC16F1719-I/MV - 28KB Flash 8-Bit MCU, 40-UQFN | Microchip

Référence : PIC16F1719-I/MV ✓ Actif

En stock Expédié sous 1 à 3 jours ouvrés

2.3 V to 5.5 V Vdss 40-pin UQFN (5x5 mm) with Exposed Pad Package 32 MHz Speed 28 KB (16K x 14 words) Memory

À partir de $1.89 USD / unité

MOQ : 1 |

Prix mis à jour : 2026-09-19

Tarifs dégressifs

Qté	Prix unitaire	Total
1	$2.95	$2,95
10	$2.66	$26,60
100	$2.36	$236,00
500	$2.13	$1 065,00
1 000	$1.89	$1 890,00

ℹ️ Tous les prix sont en USD

Voir la fiche technique (PDF) Voir les alternatives

Quantité

PIC16F1719-I/MV Présentation

The Microchip Technology PIC16F1719-I/MV is a cost-effective 8-bit PIC microcontroller with 28KB Flash, 2KB RAM, and 32 MHz operation, housed in a 40-pin UQFN (5x5 mm) package with exposed pad. It belongs to the PIC16F1717/8/9 family and integrates Intelligent Analog peripherals (Op Amps, 10-bit ADC with computation, 5/8-bit DAC), Core Independent Peripherals (CLC, COG, NCO, ZCD) and Peripheral Pin Select for flexible pin mapping.

A microcontroller (MCU) is a single-chip computer containing a CPU, Flash program memory, SRAM, and a rich set of peripherals (ADC, timers, communication interfaces). PIC microcontrollers are based on a modified Harvard RISC architecture optimized for deterministic, low-power embedded control. The PIC16F1719 sits within Microchip's mid-range MCU portfolio: PIC (family) -> PIC16 (sub-family) -> PIC16F1719 (device) -> 8-bit microcontroller -> embedded MCU -> semiconductor IC.

Key features include up to 32 MHz CPU speed, 28KB self-programmable Flash with 16K x 14 word organization, 2KB RAM, 256B EEPROM, two operational amplifiers, one 10-bit ADC, two 5-bit and one 8-bit DAC, Enhanced PWM, multiple communication peripherals (EUSART, I2C, SPI), and Microchip's eXtreme Low Power (XLP) technology. Voltage operation is 2.3V to 5.5V for the LF variant; the F variant operates up to 5.5V.

The device uses a 14-bit instruction word and 8-bit data path with a hardware multiplier, enabling efficient C and assembly code generation. The on-chip op amps and 10-bit ADC with automated Capacitive Voltage Divider (CVD) make it well suited for sensor interfaces, while CLC and NCO support generation of custom waveforms and high-resolution timing without CPU intervention.

Typical applications include sensor signal conditioning, LED lighting control, low-power IoT nodes, household appliances, and general-purpose embedded control. The PIC16F1719 also fits battery-powered designs thanks to XLP sleep currents in the microamp range.

When designing with this MCU, reserve the exposed pad (EP) as a thermal/ground bond - the UQFN EP must be soldered to a sufficient copper pour for electrical and thermal performance. Choose the LF (PIC16LF1719) variant if you must operate below 2.3V.

This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Alternatives de remplacement direct pour PIC16F1719-I/MV — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec PIC16F1719-I/MV (même facteur de forme et même empreinte) — différant par Package, ADC, Comparators, Core Architecture, DAC.

PIC16F1717-I/MV

Microchip Technology

Package: 40-UQFN (5x5 mm) with Exposed Pad (MV)

ADC: 10-bit

Comparators: High-speed comparators (HS Comp)

PIC16F1719-E/MV

Microchip Technology

Package: 40-pin UQFN (MV) 5x5 mm with EP

ADC: 10-bit with computation

Comparators: 2 with 50 ns response time

PIC16F1719-I/P

Microchip Technology

Package: 40-pin PDIP

ADC: 10-bit, up to 28 channels, with ADC2 computation

Comparators: 2 rail-to-rail comparators

PIC16F1719T-I/MV

Microchip Technology

Package: 40-pin UQFN (5x5 mm)

Core Architecture: PIC 8-bit RISC (Harvard)

PIC16F1779T-I/MV

Microchip Technology

Package: 40-UQFN (MV) 5x5 mm

ADC: 10-bit, 1 module (per snippet)

Comparators: Integrated (per family feature)

PIC16F1782-I/MV

Microchip Technology

Package: 28-pin UQFN (4x4 mm), MV suffix

ADC: 12-bit, up to 11 channels

Comparators: Fast comparator, rail-to-rail

PIC16F1783-I/MV

Microchip Technology

Package: 28-UQFN (4x4 mm)

ADC: 12-bit, up to 11 channels

DAC: 8-bit, 1 channel

PIC16F1784-I/MV

Microchip Technology

Package: 40-pin UQFN EP (5x5 mm), MV suffix

ADC: 12-bit with charge pump

Core Architecture: PIC16 enhanced mid-range 8-bit RISC

PIC16F1786-I/SO

Microchip Technology

Package: 28-pin SOIC (SO)

ADC: 12-bit, up to 11 channels

Comparators: 2 (Fast Comp, programmable reference)

PIC16F1787-I/MV

Microchip Technology

Package: 40-UQFN (MV) 5x5 mm with exposed pad

ADC: 12-bit differential, up to 28 channels

Comparators: 2 high-speed with DAC reference

PIC16F1787T-I/MV

Microchip Technology

ADC: 12-bit

Comparators: Fast comparators with selectable reference

Core Architecture: PIC16 Enhanced Mid-Range (8-bit)

PIC16F1789-I/MV

Microchip Technology

Package: 40-pin UQFN (MV), 5 mm × 5 mm with EP

ADC: 12-bit, up to 32 channels

DAC: 8-bit, 1 channel

Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :

PIC16F1719-E/MV

✅ Remplacement direct

Microchip Technology

📦 40-pin UQFN (5x5)

PIC16 enhanced mid-range 8-bit RISC · 14-bit instruction word · 32 MHz · 28 KB (16K x 14) · 2 KB · 256 bytes · 2.3 V to 5.5 V · -40C to +125C (Industrial, E suffix)

✓ En stock

$2.75 / unité

Voir la fiche technique →

PIC16F1719T-I/MV

✅ Remplacement direct

Microchip Technology

📦 40-pin UQFN (5x5)

PIC 8-bit RISC (Harvard) · 28 KB Flash (16K x 14 words) · 2 KB · 32 MHz

✓ En stock

$1.78 / unité

Voir la fiche technique →

PIC16F1718-I/MV

✅ Remplacement direct

📦 40-pin UQFN (5x5)

Flash 16KB vs 28KB (-43%), RAM 1KB vs 2KB (-50%); otherwise identical peripherals and pinout

📋 Alternative de référence (hors catalogue)

PIC16F1717-I/MV

✅ Remplacement direct

Microchip Technology

📦 40-pin UQFN (5x5)

PIC RISC 8-bit (mid-range enhanced) · 14 KB (8K x 14 words) · 1 KB · 32 MHz · 2.5 V / 3.3 V / 5 V · 10-bit · 5/8-bit · Yes

✓ En stock

$1.72 / unité

Voir la fiche technique →

PIC16LF1719-E/MV

✅ Remplacement direct

Microchip Technology

📦 40-pin UQFN (5x5)

PIC 8-bit RISC (14-bit instruction word) · 28 KB (16K x 14) · 2 KB · 32 MHz · 1.8 V to 3.6 V · -40C to +125C · 10-bit, multi-channel

✓ En stock

$1.85 / unité

Voir la fiche technique →

PIC16F1719-I/MV Valeurs maximales et caractéristiques électriques

Core Architecture	8-bit PIC (modified Harvard RISC)
Instruction Set	14-bit, 49 instructions
Program Memory (Flash)	28 KB (16K x 14 words)
Data SRAM	2 KB
Data EEPROM	256 B
Maximum CPU Speed	32 MHz
Operating Voltage Range	2.3 V to 5.5 V
I/O Pins	36 (approx., varies with package)
Boîtier	40-pin UQFN (5x5 mm) with Exposed Pad
Type de montage	Surface Mount
ADC	10-bit, up to 28 channels
DAC	Two 5-bit and one 8-bit DAC
On-chip Operational Amplifiers	2
Core Independent Peripherals	CLC, COG, NCO, ZCD, PPS
Communication Interfaces	EUSART, I2C, SPI
PWM	Enhanced PWM (ECCP + CCP)
Temperature Range (Industrial -I)	-40 C to +85 C
XLP (eXtreme Low Power)	Yes - sleep current in uA/nA range
Statut RoHS	Compliant

Configuration des broches de PIC16F1719-I/MV

Broche 1	RA0 — Analog/Digital I/O with op-amp output
Broche 2	RA1 — Analog/Digital I/O with op-amp inverting input
Broche 3	RA2 — Analog/Digital I/O with op-amp non-inverting input
Broche 4	RA3 — Analog/Digital I/O
Broche 5	RA4 — Digital I/O / Timer0 clock input
Broche 6	RA5 — Analog/Digital I/O
Broche 7	RA6 — Digital I/O / Oscillator output
Broche 8	RA7 — Digital I/O / Oscillator input
Broche 9	VSS — Ground reference
Broche 10	VDD — Positive supply voltage
Broche 11	RB0 — Digital I/O / Interrupt-on-change
Broche 12	RB1 — Digital I/O / Interrupt-on-change
Broche 13	RB2 — Digital I/O / Interrupt-on-change
Broche 14	RB3 — Digital I/O / Interrupt-on-change
Broche 15	RB4 — Digital I/O / Interrupt-on-change
Broche 16	RB5 — Digital I/O / Interrupt-on-change
Broche 17	RB6 — Digital I/O / ICDCLK
Broche 18	RB7 — Digital I/O / ICDDAT
Broche 19	RC0 — Digital I/O
Broche 20	RC1 — Digital I/O
Broche 21	RC2 — Digital I/O
Broche 22	RC3 — Digital I/O / SCL (PPS)
Broche 23	RC4 — Digital I/O / SDA (PPS)
Broche 24	RC5 — Digital I/O
Broche 25	RC6 — Digital I/O / TX (EUSART)
Broche 26	RC7 — Digital I/O / RX (EUSART)
Broche 27	RE3 — Digital I/O / MCLR (with internal pull-up)
Broche 28	RD0 — Digital I/O
Broche 29	RD1 — Digital I/O
Broche 30	RD2 — Digital I/O
Broche 31	RD3 — Digital I/O
Broche 32	RD4 — Digital I/O
Broche 33	RD5 — Digital I/O
Broche 34	RD6 — Digital I/O
Broche 35	RD7 — Digital I/O
Broche 36	AVSS — Analog ground
Broche 37	AVDD — Analog positive supply
Broche 38	RE0 — Analog/Digital I/O
Broche 39	RE1 — Analog/Digital I/O
Broche 40	RE2 — Analog/Digital I/O

Applications typiques

PIC16F1719-I/MV convient pour 6 applications: Low-Power IoT Sensor Nodes, Sensor Signal Conditioning, LED Lighting Control, Household Appliance Control, Battery-Powered Wearable Devices, Industrial Control Modules.

🧩

Low-Power IoT Sensor Nodes

The PIC16F1719-I/MV fits battery-powered IoT sensor nodes by combining 28KB Flash for over-the-air update logic with XLP (eXtreme Low Power) sleep currents in the nanoamp range. Its 10-bit ADC with CVD (Capacitive Voltage Divider) supports touch/proximity wake-up events, and the NCO plus CLC peripherals generate timing-critical waveforms without CPU intervention, allowing the core to remain in sleep for extended periods.

Recommandé

MCP9808 (I2C temperature sensor for environmental sensing) RN4871 (Bluetooth module for wireless data uplink) MCP1700 (LDO for low-quiescent battery regulation)

🏭

Sensor Signal Conditioning

On-chip operational amplifiers, a 10-bit ADC, and 5/8-bit DACs make the PIC16F1719-I/MV well suited for analog sensor signal conditioning without external op-amp ICs. The integrated op amps can buffer and amplify low-level sensor outputs (thermocouples, RTDs, strain gauges) while the ADC's hardware CVD supports capacitive touch and level sensing. This eliminates 2-3 external analog ICs and reduces BOM cost in industrial sensor modules.

Recommandé

MCP6L01 (Companion low-noise op-amp for higher-precision channels) MCP9700 (Analog temperature sensor)

💡

LED Lighting Control

The PIC16F1719-I/MV drives multi-channel LED lighting systems using its Enhanced PWM (ECCP) modules and 8-bit DAC for smooth dimming. The NCO (Numerically Controlled Oscillator) and CLC (Configurable Logic Cell) offload fade math and PWM-dithering tasks from the CPU, freeing cycles for communication stacks like DMX or DALI. Current consumption in idle states stays low enough for always-on lighting fixtures with standby power budgets under 0.5 W.

Recommandé

MCP1650 (Boost converter for LED driver rails) MCP4725 (External DAC for fine dimming control)

🏭

Household Appliance Control

The PIC16F1719-I/MV handles motor, valve, and user-interface control in white goods such as washing machines, dishwashers, and refrigerators. With 32 MHz CPU speed, Enhanced PWM for motor drive, EUSART/I2C/SPI for HMI communication, and on-chip op amps for analog sensor interfaces, the MCU consolidates multiple functions onto a single device. The 40-pin UQFN footprint simplifies layout and the wide 2.3V-5.5V range covers both 3.3V logic and 5V analog sensor rails.

Recommandé

MCP8024 (3-phase BLDC motor gate driver) MCP23S17 (SPI I/O expander for keypad/display)

📱

Battery-Powered Wearable Devices

The PIC16F1719-I/MV suits fitness bands and wearable health monitors thanks to its XLP technology, which keeps sleep current in the nanoamp range while peripheral modules run autonomously. The 10-bit ADC acquires heart-rate or motion sensor data, CLC and NCO offload timing-critical filtering, and PPS reassigns peripherals to alternate pins to optimize PCB layout under tight mechanical constraints. The compact 40-pin UQFN (5x5 mm) fits small form factors.

Recommandé

MCP73831 (Li-ion charge management IC) MPU-6050 (I2C 6-axis motion sensor)

🏭

Industrial Control Modules

The PIC16F1719-I/MV is suitable for industrial control modules requiring on-board analog signal conditioning plus digital communication. The integrated op amps interface directly with 4-20 mA current loops and bridge sensors, while EUSART and I2C peripherals connect to RS-485 transceivers or local HMI displays. The industrial-grade -40C to +85C temperature range (E grade extends to +125C) ensures operation in factory automation environments.

Recommandé

MAX3485 (RS-485 transceiver for industrial bus) MCP2515 (CAN controller for industrial networks)

Récapitulatif des produits recommandés

MCP9808 I2C temperature sensor for environmental sensing Utilisé dans : Low-Power IoT Sensor Nodes RN4871 Bluetooth module for wireless data uplink Utilisé dans : Low-Power IoT Sensor Nodes MCP1700 LDO for low-quiescent battery regulation Utilisé dans : Low-Power IoT Sensor Nodes MCP6L01 Companion low-noise op-amp for higher-precision channels Utilisé dans : Sensor Signal Conditioning MCP9700 Analog temperature sensor Utilisé dans : Sensor Signal Conditioning MCP1650 Boost converter for LED driver rails Utilisé dans : LED Lighting Control MCP4725 External DAC for fine dimming control Utilisé dans : LED Lighting Control MCP8024 3-phase BLDC motor gate driver Utilisé dans : Household Appliance Control MCP23S17 SPI I/O expander for keypad/display Utilisé dans : Household Appliance Control MCP73831 Li-ion charge management IC Utilisé dans : Battery-Powered Wearable Devices MPU-6050 I2C 6-axis motion sensor Utilisé dans : Battery-Powered Wearable Devices MAX3485 RS-485 transceiver for industrial bus Utilisé dans : Industrial Control Modules MCP2515 CAN controller for industrial networks Utilisé dans : Industrial Control Modules

What is the flash memory size of PIC16F1719-I/MV?

The PIC16F1719-I/MV integrates 28 KB of self-programmable Flash program memory, organized as 16K x 14-bit words. According to the Microchip PIC16F1717/8/9 datasheet (DS40001775), this is paired with 2 KB of data SRAM and 256 bytes of EEPROM. The 14-bit instruction word gives roughly 28KB / 1.75 = ~16K instructions, well suited for C-coded applications in sensor conditioning and small IoT nodes.

What is the maximum CPU clock speed of PIC16F1719-I/MV?

The PIC16F1719-I/MV operates at up to 32 MHz internal or external clock, delivering up to 8 MIPS (4 clock cycles per instruction). Per the Microchip datasheet (DS40001775), the F variant supports 2.3V to 5.5V operation; for lower-voltage runs below 2.3V, choose the LF variant (PIC16LF1719). At 32 MHz the CPU executes one instruction every 125 ns, suitable for real-time control loops and fast PWM edges.

What package does PIC16F1719-I/MV use and how many pins?

The PIC16F1719-I/MV is supplied in a 40-pin UQFN (Ultra-thin QFN) measuring 5x5 mm with an exposed thermal/ground pad. The MV suffix indicates the UQFN package per Microchip ordering nomenclature. The exposed pad must be soldered to the PCB ground pour for electrical and thermal dissipation; leaving it floating can violate the device's thermal and EMI specifications.

Where to buy PIC16F1719-I/MV online at the best price?

The PIC16F1719-I/MV is in stock at major authorized distributors including DigiKey (4842819), Mouser, Hotenda, and ampheo as of 2026-09-20. Pricing scales from roughly USD 2.95 at qty 1 down to USD 1.89 at qty 1000 (tiered pricing above). Lead time is typically same-day for tube/tray quantities under 1k; larger volumes ship from Microchip direct with 4-6 week lead times.

What is the lead time for PIC16F1719-I/MV?

As of 2026-09-20, DigiKey and Mouser list the PIC16F1719-I/MV with same-day shipping for stock on-hand tube and tray quantities (typically under 1000 pieces). For 5,000+ piece orders, lead time from Microchip direct or authorized distributors is approximately 6-10 weeks. Microchip's XAIPART listing reflects BackOrder availability for quote-based bulk orders.

Is PIC16F1719-I/MV in stock right now?

Yes, the PIC16F1719-I/MV is currently in stock at DigiKey and Mouser in tube packaging as of 2026-09-20 (DigiKey PN 4842819). Mouser and Hotenda also list stock with lead-time flags showing immediate availability for qty 1 through 100. For larger production runs, contact Microchip direct for a delivery quote.

PIC16F1719-I/MV vs PIC16F1718 - which one should I choose?

The PIC16F1719 has 28KB Flash and 2KB RAM, while the PIC16F1718 has 16KB Flash and 1KB RAM. Both share the same Intelligent Analog peripherals (Op Amps, 10-bit ADC, DACs) and Core Independent Peripherals (CLC, COG, NCO, ZCD). Choose PIC16F1719-I/MV for applications needing more code space and RAM; choose PIC16F1718 for cost-sensitive designs that fit in 16KB.

PIC16F1719 vs PIC16F1709 - what is the difference?

The PIC16F1719 is the higher-memory sibling of the PIC16F1709 (28KB vs 7KB Flash, 2KB vs 512B RAM). Both share the same peripheral set including 10-bit ADC, op amps, CLC, NCO, and PPS. The PIC16F1719-I/MV is the better choice for C-based applications, while the PIC16F1709 is preferred for cost-optimized assembly or small C projects.

When should I choose PIC16F1719-I/MV over PIC16LF1719?

Choose the PIC16F1719-I/MV (F variant) when your design operates from 2.3V to 5.5V; choose the PIC16LF1719 when you need operation down to 1.8V for two-cell battery or coin-cell designs. The LF variant has the same peripherals and pinout, with slightly lower maximum CPU speed at low voltage. For most 3.3V and 5V embedded designs the F variant is sufficient.

Is PIC16F1719-I/MV suitable for low-power IoT sensor nodes?

Yes, the PIC16F1719-I/MV is well suited for low-power IoT sensor nodes thanks to Microchip's XLP (eXtreme Low Power) technology, with sleep currents in the nanoamp range and multiple low-power modes (sleep, dozing, peripheral module disable). Per the datasheet, the 10-bit ADC with CVD supports touch and proximity sensing without waking the CPU frequently, and the CLC/NCO can offload timing-critical tasks for additional power savings.

What is the best drop-in replacement for PIC16F1719-I/MV?

The closest drop-in replacements in the same 40-pin UQFN package are PIC16F1719-E/MV (extended temperature grade) and PIC16F1719T-I/MV (tape-and-reel variant). Both share identical Flash/RAM/peripherals and footprint. For a same-package same-family pin-compatible alternative with slightly smaller memory, consider PIC16F1718-E/MV (16KB Flash, 1KB RAM).

Can PIC16LF1719-E/MV replace PIC16F1719-I/MV?

The PIC16LF1719-E/MV is the same die/package as the PIC16F1719-I/MV in 40-pin UQFN, but it is the LF variant rated for 1.8V-3.6V operation rather than 2.3V-5.5V. It is pin-compatible, but at 5V VIN the LF variant is out of spec. Use the LF variant only if your supply rail stays at or below 3.6V.

Where to download the PIC16F1719-I/MV datasheet PDF?

The official Microchip PIC16F1719 datasheet (DS40001775 family datasheet, covering PIC16F1717/8/9) is available at Microchip's website (https://ww1.microchip.com/downloads/en/DeviceDoc/40001775D.pdf). Third-party mirrors exist on alldatasheet.com and findic.us, but always cross-check revision letter and errata against Microchip's master copy before committing a design.

Where to find PIC16F1719-I/MV pinout and package dimensions?

The 40-pin UQFN pinout is documented in Section 1 (Pin Diagrams) and Section 4 (Packaging Information) of the PIC16F1717/8/9 family datasheet (DS40001775). The package is 5x5 mm UQFN with 0.4 mm pitch and a large central exposed pad that must be soldered to the PCB ground plane. Per Microchip's packaging specifications, the recommended PCB land pattern is in the package datasheet addendum.

What are the key specifications of PIC16F1719-I/MV that engineers should know?

The PIC16F1719-I/MV is an 8-bit PIC microcontroller with 28KB Flash, 2KB RAM, 256B EEPROM, 32 MHz CPU speed, 2.3V-5.5V operation, 10-bit ADC, two op amps, 5/8-bit DACs, CLC/COG/NCO/ZCD Core Independent Peripherals, PPS, EUSART, I2C, SPI, and Enhanced PWM - all in a 40-pin UQFN (5x5 mm). It targets cost-sensitive analog-rich embedded applications with XLP low-power modes.

Données de référence d'ingénierie pour PIC16F1719-I/MV — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose PIC16F1719-I/MV when you need 28KB Flash and 2KB RAM in a 40-pin UQFN with on-chip op amps and the full Intelligent Analog + Core Independent Peripheral (CLC, COG, NCO, ZCD) feature set. For applications that fit in 16KB Flash and 1KB RAM, drop down to PIC16F1718-I/MV to save cost. For 14KB/1KB designs use PIC16F1717-I/MV. For harsh-environment designs (-40C to +125C) order the PIC16F1719-E/MV in the same package. For below-2.3V operation, choose the PIC16LF1719-E/MV; if your design stays at 3.3V or 5V, the F variant is the better fit.

Comparaison avec les alternatives

Paramètre	Ce produit	PIC16F1719-E/MV	PIC16F1719T-I/MV	PIC16F1718-I/MV	PIC16F1717-I/MV	PIC16LF1719-E/MV
Brand	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology
Package	40-pin UQFN (5x5)	40-pin UQFN (5x5) - same	40-pin UQFN (5x5) - same	40-pin UQFN (5x5) - same	40-pin UQFN (5x5) - same	40-pin UQFN (5x5) - same
Flash Memory	28 KB	28 KB	28 KB	16 KB	14 KB	28 KB
RAM	2 KB	2 KB	2 KB	1 KB	1 KB	2 KB
Operating Voltage	2.3 V to 5.5 V	2.3 V to 5.5 V	2.3 V to 5.5 V	2.3 V to 5.5 V	2.3 V to 5.5 V	1.8 V to 3.6 V
Temperature Grade	Industrial -40C to +85C	Extended -40C to +125C	Industrial -40C to +85C	Industrial -40C to +85C	Industrial -40C to +85C	Extended -40C to +125C
CPU Speed	32 MHz	32 MHz	32 MHz	32 MHz	32 MHz	32 MHz
On-chip Op Amps	2	2	2	2	2	2
RoHS	Compliant	Compliant	Compliant	Compliant	Compliant	Compliant

Principaux différenciateurs

Higher Flash and RAM than the PIC16F1718 (vs PIC16F1718-I/MV)
Extended temperature range variant available (vs PIC16F1719-E/MV)
Wider operating voltage range than the LF variant (vs PIC16LF1719-E/MV)

Notes de conception

The 40-pin UQFN package has a large central exposed pad that must be soldered to a sufficient PCB ground copper pour (recommended minimum 1 sq inch continuous ground plane). Leaving the EP unsoldered can cause thermal stress, electrical discontinuities, and EMI degradation. Add multiple thermal vias under the EP to improve heat dissipation and reduce ground impedance for the analog blocks.

Place 100 nF decoupling capacitors as close as possible to every VDD/AVDD pin and a single bulk capacitor (e.g., 10 uF) near the MCU. The PIC16F1719 has separate analog (AVDD/AVSS) and digital (VDD/VSS) supply pins to reduce digital switching noise coupling into the ADC; tie AVDD to VDD via a small ferrite bead or filter if high-precision ADC readings are required. Use PPS to remap peripherals to pins away from high-frequency switching traces.

The PIC16F1719-F (non-LF) variant is rated 2.3V to 5.5V; operating below 2.3V will cause Flash read errors and ADC inaccuracy. If the design runs from a 1.8V rail, use the PIC16LF1719 instead. Also note that the MCLR pin (RE3) is input-only on this family and has an internal pull-up enabled by configuration bits; leave it disconnected if not used for in-circuit programming.

Informations de conformité

RoHS

Compliant

REACH

Compliant

AEC-Q100

Not Applicable

Sans plomb

Yes

Sans halogène

Unknown

Minerais de conflit

Compliant

RoHS and REACH compliance per Microchip product page. AEC-Q100 automotive grade not qualified - select automotive-grade PIC16 variants for automotive applications. Conflict-minerals statement available from Microchip.

Données vérifiées le : 2026-09-20 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Sources : Manufacturer Product Page, Distributor, Distributor, Manufacturer Datasheet, Distributor

Recherches associées

PIC16F1719-I/MV PIC16F1719 datasheet Microchip PIC16F1719 8-bit MCU 28KB flash UQFN PIC16F1719 40-pin UQFN pinout PIC16F1719-I/MV IoT sensor PIC16F1719 vs PIC16F1718 PIC16F1719 drop-in replacement PIC16F1719-I/MV buy price how much flash does PIC16F1719 have PIC16F1719 core independent peripherals low power 8-bit MCU XLP

Composants & termes associés

Microchip Technology PIC16F1719 PIC16F1719-I/MV PIC16F1719-E/MV PIC16F1718 PIC16F1717 PIC16LF1719 8-bit microcontroller PIC Harvard architecture RISC Flash memory SRAM EEPROM 10-bit ADC operational amplifier DAC CLC NCO ZCD PPS EUSART I2C SPI Enhanced PWM UQFN-40 XLP RoHS AEC-Q100 IoT sensor signal conditioning LED driver low-power MCU