PIC16F648A-E/P - 8-Bit 20MHz MCU 7KB Flash | Microchip Technology
Teilenummer: PIC16F648A-E/P ✓ AktivPIC16F648A-E/P Übersicht
A PIC microcontroller is an 8-bit RISC-based embedded-control component within the broader semiconductor and microcontroller hierarchy. It combines program memory, data memory, digital I/O, timers, and peripherals in one package. The PIC16F648A adds application-oriented features including a USART, capture/compare/PWM module, two comparators, and a programmable voltage reference, making it suitable for compact controllers that must interface with sensors, actuators, and communication equipment.
Key features include 7 KB flash memory, 256 bytes of RAM, 256 bytes of EEPROM, 16 I/O pins, and a 4 MHz internal oscillator. The internal oscillator can support operation without an external crystal, while the 20 MHz maximum provides additional performance headroom when an external clock source is used. The 3.3 V and 5 V operating descriptions identify it as a practical choice for conventional embedded-control and mixed-signal designs.
The PIC16F648A architecture combines an 8-bit CPU with dedicated peripherals for timing, communication, and analog measurement. Its capture/compare/PWM module supports timing and waveform-generation tasks, the USART provides asynchronous serial communication, and the two comparators plus programmable voltage reference support threshold detection and analog signal conditioning. These integrated resources reduce the need for separate analog and interface components in cost-sensitive equipment.
Typical uses include appliance controls, industrial interface modules, automotive accessory controllers, consumer products, and compact embedded instruments. The 18-pin PDIP format is particularly useful for prototypes, educational platforms, through-hole industrial controls, and repair designs where socketed components and easy inspection are preferred over the smallest possible surface-mount footprint.
Designers should account for the slower performance of DIP packages compared with leadless surface-mount options and verify the available I/O functions for each pin before assigning a board layout. The manufacturer's pin-description table should be used for PCB track assignments, and the device's configuration and programming requirements should be checked against the current Microchip documentation before production release.
This page consolidates the device's core specifications, same-footprint replacement options, application guidance, and practical design considerations into a procurement-oriented technical reference that helps engineers evaluate the PIC16F648A-E/P before integrating it into an embedded-control design.
Drop-in-Alternativen für PIC16F648A-E/P – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PIC16F648A-E/P (gleiche Bauform und Footprint) – abweichend in Package, Operating Temperature, Supply Voltage, Internal Oscillator, Communication.
PIC16F648A-I/P
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →PIC16F628A-I/P
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →PIC16F628A-E/P
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
PIC16F88-I/P
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →PIC16F648A-E/P Grenzwerte & elektrische Eigenschaften
| Microcontroller Type | 8-bit PIC RISC microcontroller |
| Maximale Taktfrequenz | 20 MHz |
| Internal Oscillator Frequency | 4 MHz |
| Flash Program Memory | 7 KB (4K × 14 words) |
| RAM | 256 bytes |
| EEPROM Data Memory | 256 bytes |
| Number of I/O Pins | 16 I/O pins |
| Total Package Pins | 18 pins |
| Gehäuse | 18-pin PDIP |
| Versorgungsspannung | 3.3 V or 5 V |
| USART | 1 USART |
| Comparator Count | 2 comparators |
| Capture/Compare/PWM | 1 capture/compare/PWM module |
| Programmable Voltage Reference | Available |
| Montageart | Through-hole |
PIC16F648A-E/P 18-pin pdip Pinbelegungsleitfaden
Pinbelegung für PIC16F648A-E/P (18-pin pdip-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für PIC16F648A-E/P.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
PIC16F648A-E/P ist geeignet für 6 Anwendungs: Appliance Control Modules, Industrial Sensor Interfaces, Automotive Accessory Controllers, Serial Communication Equipment, Programmable Control and Timer Boards, Consumer Product Interfaces.
Appliance Control Modules
The PIC16F648A-E/P fits appliance-control modules because it combines 4K × 14 words of flash program memory, 256 bytes of EEPROM, and 16 I/O pins in an 18-pin PDIP package. Those resources support state retention, button or sensor inputs, and motor-valve control without requiring a separate nonvolatile-memory IC. Its USART can also connect the controller to a service interface or higher-level controller. The through-hole package is particularly convenient for repairable appliances and prototypes. Firmware should use the peripheral pin-assignment table because the capture/compare/PWM, comparator, and USART functions share I/O resources.
Empfohlen
Industrial Sensor Interfaces
For industrial sensor interfaces, the PIC16F648A-E/P provides two comparators and a programmable voltage reference for threshold detection, together with 16 I/O pins for digital sensors, indicators, and actuators. Its 8-bit architecture is appropriate for compact measurement and control loops, while 256 bytes of EEPROM preserves calibration or configuration values across power cycles. The 20 MHz clock also permits faster peripheral timing than the 4 MHz internal oscillator. In an industrial enclosure, designers should evaluate the exact -E/P temperature limits, provide appropriate input protection, and route sensitive comparator and reference connections away from switching nodes.
Empfohlen
Automotive Accessory Controllers
The PIC16F648A-E/P can support small automotive accessory controllers where flash-based firmware, EEPROM-backed configuration, and a compact pin count are useful. Its USART supports diagnostic or peripheral communication, while the timer and capture/compare/PWM resources can handle repetitive switching, sensing, or indicator functions. Microchip identifies the PIC16F648A family for automotive applications, but the designer must confirm the ordering code's temperature and qualification requirements. The 18-pin PDIP construction is useful for early prototypes and serviceable through-hole assemblies; production qualification and transient protection must be evaluated separately.
Empfohlen
Serial Communication Equipment
The integrated USART makes the PIC16F648A-E/P useful in compact serial bridges, parameter programmers, and equipment-control modules. The 20 MHz maximum clock supports deterministic interrupt-driven communication, while 256 bytes of RAM can hold short protocol buffers and 7 KB of flash provides space for command handling and configuration logic. The device can also use its comparators and programmable voltage reference for simple interface detection. A production design should allocate the USART pins according to the data sheet, confirm its level and baud-rate requirements, and provide ESD or surge protection where external wiring is exposed.
Empfohlen
Programmable Control and Timer Boards
The PIC16F648A-E/P is appropriate for educational timers, sequencing controllers, and programmable relay boards because it combines a general-purpose 8-bit CPU with a capture/compare/PWM module and 16 I/O pins. Its 4 MHz internal oscillator reduces the need for an external crystal in simple clocking or debounce applications, while the 20 MHz ceiling permits a faster external clock when required. Through-hole assembly makes the 18-pin PDIP easy to prototype, socket, inspect, and repair. Firmware should verify oscillator configuration and peripheral timing, and the board should include the required decoupling and programming access.
Empfohlen
Consumer Product Interfaces
The PIC16F648A-E/P can serve as the embedded controller in consumer accessories that combine a small display interface, buttons, indicators, and a simple motor or relay output. Its 7 KB flash memory accommodates a practical application program, 256 bytes of EEPROM supports user settings, and the USART enables connection to a display or accessory controller. The 18-pin PDIP package is well suited to cost-focused through-hole designs and field-replaceable assemblies. Designers should keep switching loads away from sensitive comparator inputs, account for the dissipation and inrush of the driven load, and validate the configured operating range before production.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PIC16F648A-E/P – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PIC16F648A-I/P | PIC16F628A-I/P | PIC16F628A-E/P | PIC16F88-I/P |
|---|---|---|---|---|---|
| Package | 18-pin PDIP | 18-pin PDIP | 18-pin PDIP | 18-pin PDIP | 18-pin PDIP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Architecture | 8-bit PIC RISC | 8-bit PIC RISC | 8-bit PIC RISC | 8-bit PIC RISC | 8-bit PIC RISC |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Flash Program Memory | 7 KB (4K × 14 words) | 7 KB (4K × 14 words) | 3.5 KB | 3.5 KB | 4 KB |
Wichtigste Unterscheidungsmerkmale
- Larger flash and EEPROM than the reduced-memory PIC16F628A alternatives (vs. PIC16F628A-I/P)
- Direct same-package temperature-grade alternative (vs. PIC16F648A-I/P)
- Two integrated comparators support compact analog threshold designs (vs. PIC16F88-I/P)
Designhinweise
Use the manufacturer's 18-pin pin-description table to assign every socket position before routing the PCB. Several I/O pins support multiplexed functions such as USART, comparator inputs, capture/compare/PWM, and programming, so changing an assigned peripheral can change the external connection. Keep programming access reachable and place the decoupling capacitor close to the supply and ground pins. For an existing board, verify that the replacement's package dimensions and pin numbering match the original 18-pin PDIP footprint.
Power the PIC16F648A-E/P within its documented 3.3 V or 5 V operating arrangement and include local supply decoupling close to the device pins. Separate analog comparator and programmable-reference inputs from high-current switching traces to reduce noise coupling. When the MCU controls relays, motors, lamps, or solenoids, use suitable driver transistors, flyback protection, and a common-ground strategy rather than driving the load directly from an I/O pin.
Do not substitute a reduced-memory device solely because the package appears identical. PIC16F628A-I/P and PIC16F628A-E/P provide 3.5 KB of flash rather than the target's 7 KB, and their EEPROM capacity is 128 bytes rather than 256 bytes. Check compiled program size, retained configuration data, peripheral assignments, and timing behavior before approving either replacement. PIC16F88-I/P also requires confirmation of its available RAM, EEPROM, and pin-function differences.
The 18-pin PDIP format favors prototype boards, socketed assemblies, and designs that are inspected or serviced through holes. Keep long oscillator traces away from comparator and reference inputs, and route external communication lines away from switching nodes. The 4 MHz internal oscillator can simplify clock layout, but adopting the 20 MHz maximum clock requires a suitable external oscillator configuration, correct load-capacitor selection, and verification of timing margins across the intended temperature range.
Compliance-Informationen
The product family is identified by Microchip for automotive, industrial, appliance, and consumer applications, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for this ordering code.