Microchip Technology

PIC16F648A-E/P - 8-Bit 20MHz MCU 7KB Flash | Microchip Technology

MPN: PIC16F648A-E/P ✓ Aktif
3.3 V or 5 V Vdss 18 pins Package 20 MHz Speed 7 KB (4K × 14 words) Memory
MOQ: 1 |

PIC16F648A-E/P Genel Bakış

The Microchip Technology PIC16F648A-E/P is an 8-bit PIC microcontroller with a maximum clock frequency of 20 MHz, 7 KB of flash program memory organized as 4K × 14 words, and 256 bytes of RAM. It is packaged in an 18-pin PDIP and is intended for applications requiring integrated analog functions, serial communication, and flash-based programmability.

A PIC microcontroller is an 8-bit RISC-based embedded-control component within the broader semiconductor and microcontroller hierarchy. It combines program memory, data memory, digital I/O, timers, and peripherals in one package. The PIC16F648A adds application-oriented features including a USART, capture/compare/PWM module, two comparators, and a programmable voltage reference, making it suitable for compact controllers that must interface with sensors, actuators, and communication equipment.

Key features include 7 KB flash memory, 256 bytes of RAM, 256 bytes of EEPROM, 16 I/O pins, and a 4 MHz internal oscillator. The internal oscillator can support operation without an external crystal, while the 20 MHz maximum provides additional performance headroom when an external clock source is used. The 3.3 V and 5 V operating descriptions identify it as a practical choice for conventional embedded-control and mixed-signal designs.

The PIC16F648A architecture combines an 8-bit CPU with dedicated peripherals for timing, communication, and analog measurement. Its capture/compare/PWM module supports timing and waveform-generation tasks, the USART provides asynchronous serial communication, and the two comparators plus programmable voltage reference support threshold detection and analog signal conditioning. These integrated resources reduce the need for separate analog and interface components in cost-sensitive equipment.

Typical uses include appliance controls, industrial interface modules, automotive accessory controllers, consumer products, and compact embedded instruments. The 18-pin PDIP format is particularly useful for prototypes, educational platforms, through-hole industrial controls, and repair designs where socketed components and easy inspection are preferred over the smallest possible surface-mount footprint.

Designers should account for the slower performance of DIP packages compared with leadless surface-mount options and verify the available I/O functions for each pin before assigning a board layout. The manufacturer's pin-description table should be used for PCB track assignments, and the device's configuration and programming requirements should be checked against the current Microchip documentation before production release.

This page consolidates the device's core specifications, same-footprint replacement options, application guidance, and practical design considerations into a procurement-oriented technical reference that helps engineers evaluate the PIC16F648A-E/P before integrating it into an embedded-control design.

Drop-in alternatifler için PIC16F648A-E/P — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller PIC16F648A-E/P (aynı form faktörü ve ayağa oturma) — farklı olan Package, Operating Temperature, Supply Voltage, Internal Oscillator, Communication.

Microchip Technology
Package: 18-pin PDIP (P)
Operating Temperature: -40C to +125C (Extended)
Supply Voltage: 4.5 V to 5.5 V
Microchip Technology
Package: 18-pin PDIP (DIP-18, 0.300 inch)
Operating Temperature: -40C to +85C (Industrial, -I)
Supply Voltage: 2.0 V to 5.5 V (Flash write >= 4.5 V)
Microchip Technology
Package: 18-pin PDIP (P, 0.300 inch, through-hole, lead-free)
Operating Temperature: -40C to +85C (industrial, I suffix)
Supply Voltage: 2.0 V to 5.5 V (4.5 V to 5.5 V for Flash programming)
Microchip Technology
Package: 18-pin PDIP (P)
Operating Temperature: -40 C to +85 C (Industrial)
Internal Oscillator: 8 MHz factory calibrated

PIC16F648A-I/P

✅ Yerleştirme
Microchip Technology
📦 18-pin PDIP
PIC16 mid-range 8-bit RISC · Flash · 7 KB (4K x 14 words) · 256 bytes · 256 bytes · 20 MHz (200 ns instruction cycle) · 2.0 V to 5.5 V (4.5 V to 5.5 V for Flash programming) · 16

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

PIC16F628A-I/P

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
Microchip Technology
📦 18-pin PDIP
PIC16 8-bit RISC · 35 single-word instructions · 200 ns (at 20 MHz) · 20 MHz · 3.5 KB (2K x 14) Flash · 224 bytes · 128 bytes · 11

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

PIC16F628A-E/P

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 18-pin PDIP
Matches the -E/P temperature ordering and 18-pin PDIP footprint, but provides 3.5 KB flash instead of 7 KB (50% lower) and 128 bytes of EEPROM instead of 256 bytes (50% lower).

📋 Katalogda Olmayan Referans Alternatifi

PIC16F88-I/P

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
Microchip Technology
📦 18-pin PDIP
PIC16 Enhanced Mid-Range 8-bit RISC · 35 single-word instructions · 20 MHz (200 ns instruction cycle) · 7 KB (4K x 14 words) · 368 bytes · 256 bytes · 2.0 V to 5.5 V · 16

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

PIC16F648A-E/P Maksimum Değerlendirmeler & Elektriksel Özellikler

Microcontroller Type 8-bit PIC RISC microcontroller
Azami Saat Hızı 20 MHz
Internal Oscillator Frequency 4 MHz
Flash Program Memory 7 KB (4K × 14 words)
RAM 256 bytes
EEPROM Data Memory 256 bytes
Number of I/O Pins 16 I/O pins
Total Package Pins 18 pins
Paket 18-pin PDIP
Besleme Gerilimi 3.3 V or 5 V
USART 1 USART
Comparator Count 2 comparators
Capture/Compare/PWM 1 capture/compare/PWM module
Programmable Voltage Reference Available
Montaj Türü Through-hole

PIC16F648A-E/P 18-pin pdip Pin Yapısı Kılavuzu

PIC16F648A-E/P (18-pin pdip paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

18-pin pdip paket pin çizelgesi için PIC16F648A-E/P

Ayrıntılı pin çıkış verisi mevcut değil: PIC16F648A-E/P.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

PIC16F648A-E/P için uygundur 6 uygulamas: Appliance Control Modules, Industrial Sensor Interfaces, Automotive Accessory Controllers, Serial Communication Equipment, Programmable Control and Timer Boards, Consumer Product Interfaces.

🔧

Appliance Control Modules

The PIC16F648A-E/P fits appliance-control modules because it combines 4K × 14 words of flash program memory, 256 bytes of EEPROM, and 16 I/O pins in an 18-pin PDIP package. Those resources support state retention, button or sensor inputs, and motor-valve control without requiring a separate nonvolatile-memory IC. Its USART can also connect the controller to a service interface or higher-level controller. The through-hole package is particularly convenient for repairable appliances and prototypes. Firmware should use the peripheral pin-assignment table because the capture/compare/PWM, comparator, and USART functions share I/O resources.

🏭

Industrial Sensor Interfaces

For industrial sensor interfaces, the PIC16F648A-E/P provides two comparators and a programmable voltage reference for threshold detection, together with 16 I/O pins for digital sensors, indicators, and actuators. Its 8-bit architecture is appropriate for compact measurement and control loops, while 256 bytes of EEPROM preserves calibration or configuration values across power cycles. The 20 MHz clock also permits faster peripheral timing than the 4 MHz internal oscillator. In an industrial enclosure, designers should evaluate the exact -E/P temperature limits, provide appropriate input protection, and route sensitive comparator and reference connections away from switching nodes.

🚗

Automotive Accessory Controllers

The PIC16F648A-E/P can support small automotive accessory controllers where flash-based firmware, EEPROM-backed configuration, and a compact pin count are useful. Its USART supports diagnostic or peripheral communication, while the timer and capture/compare/PWM resources can handle repetitive switching, sensing, or indicator functions. Microchip identifies the PIC16F648A family for automotive applications, but the designer must confirm the ordering code's temperature and qualification requirements. The 18-pin PDIP construction is useful for early prototypes and serviceable through-hole assemblies; production qualification and transient protection must be evaluated separately.

🌐

Serial Communication Equipment

The integrated USART makes the PIC16F648A-E/P useful in compact serial bridges, parameter programmers, and equipment-control modules. The 20 MHz maximum clock supports deterministic interrupt-driven communication, while 256 bytes of RAM can hold short protocol buffers and 7 KB of flash provides space for command handling and configuration logic. The device can also use its comparators and programmable voltage reference for simple interface detection. A production design should allocate the USART pins according to the data sheet, confirm its level and baud-rate requirements, and provide ESD or surge protection where external wiring is exposed.

🔧

Programmable Control and Timer Boards

The PIC16F648A-E/P is appropriate for educational timers, sequencing controllers, and programmable relay boards because it combines a general-purpose 8-bit CPU with a capture/compare/PWM module and 16 I/O pins. Its 4 MHz internal oscillator reduces the need for an external crystal in simple clocking or debounce applications, while the 20 MHz ceiling permits a faster external clock when required. Through-hole assembly makes the 18-pin PDIP easy to prototype, socket, inspect, and repair. Firmware should verify oscillator configuration and peripheral timing, and the board should include the required decoupling and programming access.

📱

Consumer Product Interfaces

The PIC16F648A-E/P can serve as the embedded controller in consumer accessories that combine a small display interface, buttons, indicators, and a simple motor or relay output. Its 7 KB flash memory accommodates a practical application program, 256 bytes of EEPROM supports user settings, and the USART enables connection to a display or accessory controller. The 18-pin PDIP package is well suited to cost-focused through-hole designs and field-replaceable assemblies. Designers should keep switching loads away from sensitive comparator inputs, account for the dissipation and inrush of the driven load, and validate the configured operating range before production.

What are the key specifications of PIC16F648A-E/P that engineers should know?
The PIC16F648A-E/P is an 8-bit flash microcontroller with a 20 MHz maximum clock, 7 KB of program memory, 256 bytes of RAM, and 16 I/O pins in an 18-pin PDIP. According to the Microchip Technology PIC16F648A data sheet, it also includes 256 bytes of EEPROM, a USART, one capture/compare/PWM module, two comparators, a programmable voltage reference, and a 4 MHz internal oscillator.
Where can I download the PIC16F648A-E/P datasheet PDF?
The official PIC16F648A-E/P datasheet PDF is available from Microchip Technology at the product's manufacturer documentation URL. The document is titled for the PIC16F648A family and covers the 18-pin PDIP configuration as well as other package variants. Use the manufacturer's pin-description table when assigning the 18 package pins, and verify the exact -E/P ordering code before releasing a production design.
Where can I find the PIC16F648A pinout?
The PIC16F648A pinout is documented in the pin-description table of the Microchip Technology PIC16F648A data sheet. The PIC16F648A-E/P uses an 18-pin PDIP package and exposes 16 configurable I/O pins in addition to its power, ground, reset, and programming-related connections. Use that table directly for PCB routing because several peripheral functions are multiplexed onto the same I/O pins.
How do I program a PIC16F648A-E/P?
The PIC16F648A-E/P is programmed through its serial programming interface using Microchip-compatible programming equipment and software. Its flash program memory is organized as 4K × 14 words, and the device also contains 256 bytes of EEPROM for nonvolatile data. The exact programming voltage, connector, and configuration settings should be taken from the current Microchip programming specification rather than inferred from another PIC16 device.
Can PIC16F648A-I/P replace PIC16F648A-E/P in an 18-pin PDIP design?
The PIC16F648A-I/P is the closest same-footprint replacement because it retains the 18-pin PDIP configuration, 20 MHz maximum clock, 7 KB flash memory, 256 bytes of RAM, and 256 bytes of EEPROM. The meaningful difference is the device temperature grade: the -I/P is intended for the industrial temperature range, while the -E/P is the extended-commercial-temperature ordering option. Confirm the required junction and ambient limits in the ordering table before substitution.
What is the best drop-in replacement for PIC16F648A-E/P?
The best direct drop-in replacement is the PIC16F648A-I/P because it preserves the 18-pin PDIP footprint and the core 20 MHz, 7 KB flash, 256-byte RAM, and 256-byte EEPROM configuration. Its main distinction is the wider industrial temperature grade. The PIC16F628A-I/P and PIC16F628A-E/P can retain the physical footprint, but their 3.5 KB flash capacity is 50% lower and requires firmware and peripheral reassessment.
When should I choose PIC16F648A-E/P instead of PIC16F628A-I/P?
Choose the PIC16F648A-E/P when firmware size, EEPROM capacity, or integrated analog resources are important because it provides 7 KB flash and 256 bytes of EEPROM versus 3.5 KB flash and 128 bytes of EEPROM on the PIC16F628A-I/P. Both use an 18-pin PDIP format and operate as 8-bit 20 MHz microcontrollers. The trade-off is lower program-memory availability on the PIC16F628A-I/P.
Is PIC16F648A-E/P suitable for industrial and automotive applications?
The PIC16F648A-E/P is suitable for commercial embedded-control designs and for applications whose specified operating range matches the -E temperature grade. Microchip identifies the family for automotive, industrial, appliance, and consumer applications, but the exact -E/P operating limits and AEC-Q100 qualification status must be checked in the current ordering information. The PIC16F648A-I/P is the appropriate same-package option when an industrial temperature grade is required.
What is the difference between PIC16F648A-E/P and PIC16F648A-E/ML?
The PIC16F648A-E/P and PIC16F648A-E/ML use the same -E temperature grade and core PIC16F648A device, but their physical packages differ. The -E/P is an 18-pin PDIP through-hole package, whereas the -E/ML is a surface-mount package. Therefore, the -E/ML is not a drop-in replacement for a board with an 18-pin DIP footprint, although it can serve a redesigned surface-mount board when its pin configuration is compatible.
PIC16F648A-E/P vs PIC16F628A-I/P: which is better for a compact controller?
The PIC16F648A-E/P is better when code size and EEPROM capacity dominate because it doubles program memory from 3.5 KB to 7 KB and doubles EEPROM from 128 bytes to 256 bytes relative to the PIC16F628A-I/P. The PIC16F628A-I/P may be suitable for smaller codebases, but firmware must fit within its smaller memory while retaining compatible I/O, timing, and peripheral usage.
What can replace PIC16F648A-E/P without redesigning an 18-pin board?
A replacement for an existing 18-pin board should retain the PDIP footprint, 3.3 V or 5 V supply arrangement, and required peripheral pin assignments. PIC16F648A-I/P provides the closest core match with identical flash, RAM, EEPROM, clock, and package characteristics. PIC16F628A-I/P and PIC16F628A-E/P also use the 18-pin format, but their 3.5 KB flash capacity and lower EEPROM capacity make them suitable only after firmware and data-storage requirements are reviewed.
Is PIC16F648A-E/P the same as PIC16F628A-I/P?
No. The PIC16F648A-E/P and PIC16F628A-I/P are related 8-bit PIC microcontrollers in 18-pin PDIP packages, but they do not have identical memory resources. The PIC16F648A-E/P provides 7 KB flash and 256 bytes of EEPROM, while the PIC16F628A-I/P provides 3.5 KB flash and 128 bytes of EEPROM. Treat the PIC16F628A as a footprint-compatible but constrained replacement rather than an identical device.
Where can I buy PIC16F648A-E/P online?
Use the Request a Quote form on this page to request PIC16F648A-E/P availability, current commercial terms, and delivery scheduling. The request should identify the exact 18-pin PDIP ordering code and required quantity so that the order can be matched to the correct tube or other authorized packaging arrangement. Live stock and shipment timing should be confirmed through the quote response.
What is the current price of PIC16F648A-E/P?
The current commercial price for PIC16F648A-E/P should be obtained through the Request a Quote form on this page. The form is the appropriate route for quantity pricing, project availability, and packaging requirements for the exact 18-pin PDIP part. Include the anticipated order quantity and target date so the returned quotation reflects the intended production requirement.
What is the lead time for PIC16F648A-E/P?
The lead time for PIC16F648A-E/P depends on current manufacturer and distribution availability, order quantity, and the selected packaging arrangement. Request the current lead time and minimum order quantity through the Request a Quote form on this page. Include your production schedule, especially for scheduled builds where a date change would affect the program.
Is PIC16F648A-E/P in stock?
Current stock status for PIC16F648A-E/P should be confirmed through the Request a Quote form on this page because inventory can change with order volume and packaging requirements. State the required quantity and whether the design needs the 18-pin PDIP configuration in tube packing. The quote response will provide the applicable availability and fulfillment information.

Mühendislik referans verileri: PIC16F648A-E/P — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Select the PIC16F648A-E/P when the design needs an 8-bit controller with 7 KB of flash, 256 bytes of RAM and EEPROM, two comparators, a programmable voltage reference, a USART, and an 18-pin PDIP footprint. Choose the PIC16F648A-I/P when the same electrical configuration and footprint are required but a wider industrial temperature grade is needed. Consider the PIC16F628A-I/P or PIC16F628A-E/P only when the firmware fits within 3.5 KB of flash and persistent data remains below 128 bytes; their reduced memory can require code and storage redesign. PIC16F88-I/P can fit a similarly constrained 18-pin design, but its RAM, EEPROM, and peripheral assignments require individual verification. For any substitute, confirm pin multiplexing, oscillator configuration, programming requirements, supply levels, and the complete operating-temperature specification.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün PIC16F648A-I/P PIC16F628A-I/P PIC16F628A-E/P PIC16F88-I/P
Package 18-pin PDIP 18-pin PDIP 18-pin PDIP 18-pin PDIP 18-pin PDIP
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
CPU Architecture 8-bit PIC RISC 8-bit PIC RISC 8-bit PIC RISC 8-bit PIC RISC 8-bit PIC RISC
Maximum Clock Frequency 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz
Flash Program Memory 7 KB (4K × 14 words) 7 KB (4K × 14 words) 3.5 KB 3.5 KB 4 KB

Ana Farklılayıcılar

  • Larger flash and EEPROM than the reduced-memory PIC16F628A alternatives (karşılaştırma:PIC16F628A-I/P)
  • Direct same-package temperature-grade alternative (karşılaştırma:PIC16F648A-I/P)
  • Two integrated comparators support compact analog threshold designs (karşılaştırma:PIC16F88-I/P)

Tasarım Notları

Use the manufacturer's 18-pin pin-description table to assign every socket position before routing the PCB. Several I/O pins support multiplexed functions such as USART, comparator inputs, capture/compare/PWM, and programming, so changing an assigned peripheral can change the external connection. Keep programming access reachable and place the decoupling capacitor close to the supply and ground pins. For an existing board, verify that the replacement's package dimensions and pin numbering match the original 18-pin PDIP footprint.

Power the PIC16F648A-E/P within its documented 3.3 V or 5 V operating arrangement and include local supply decoupling close to the device pins. Separate analog comparator and programmable-reference inputs from high-current switching traces to reduce noise coupling. When the MCU controls relays, motors, lamps, or solenoids, use suitable driver transistors, flyback protection, and a common-ground strategy rather than driving the load directly from an I/O pin.

Do not substitute a reduced-memory device solely because the package appears identical. PIC16F628A-I/P and PIC16F628A-E/P provide 3.5 KB of flash rather than the target's 7 KB, and their EEPROM capacity is 128 bytes rather than 256 bytes. Check compiled program size, retained configuration data, peripheral assignments, and timing behavior before approving either replacement. PIC16F88-I/P also requires confirmation of its available RAM, EEPROM, and pin-function differences.

The 18-pin PDIP format favors prototype boards, socketed assemblies, and designs that are inspected or serviced through holes. Keep long oscillator traces away from comparator and reference inputs, and route external communication lines away from switching nodes. The 4 MHz internal oscillator can simplify clock layout, but adopting the 20 MHz maximum clock requires a suitable external oscillator configuration, correct load-capacitor selection, and verification of timing margins across the intended temperature range.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The product family is identified by Microchip for automotive, industrial, appliance, and consumer applications, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for this ordering code.

Veri doğrulanma tarihi: 2026-11-15 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

PIC16F648A-E/P datasheet PIC16F648A pinout PIC16F648A programming PIC16F648A pdf PIC16F648A datasheet PDF PIC16F648A-E/P price PIC16F648A-E/P equivalent PIC16F648A-E/P replacement PIC16F648A-E/P vs PIC16F628A-I/P PIC16F648A 18-pin PDIP Microchip PIC16F648A-E/P PIC16F648A application circuit

İlgili Bileşenler ve Terimler

Microchip Technology PIC16F648A-E/P PIC16F648A PIC16F648A-I/P PIC16F628A-I/P PIC16F628A-E/P PIC16F88-I/P 8-bit microcontroller PIC16 MCU family embedded controller RISC architecture flash program memory EEPROM RAM USART capture/compare/PWM comparator programmable voltage reference 18-pin PDIP through-hole package 4 MHz internal oscillator 20 MHz clock industrial temperature grade appliance control industrial sensor interface
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle