PIC16F721T-I/SS - 8-bit 16MHz 7KB Flash MCU | Microchip | 20-SSOP
Teilenummer: PIC16F721T-I/SS ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $1.85 | $1,85 |
| 10 | $1.69 | $16,90 |
| 100 | $1.48 | $148,00 |
| 500 | $1.32 | $660,00 |
| 1.000 | $1.18 | $1.180,00 |
PIC16F721T-I/SS Übersicht
A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, RAM, peripherals, and I/O, designed to execute embedded firmware in standalone systems. Within the broader category tree, the PIC16F721 sits at microcontroller -> embedded processor -> integrated circuit -> semiconductor, and is part of Microchip's PIC16 mid-range family that targets cost-sensitive, deterministic 8-bit applications. The I/SS suffix encodes an industrial operating temperature range (-40C to +85C) and the SSOP surface-mount package, while the trailing T indicates tape-and-reel packaging for high-volume assembly.
Key features include an internal 16MHz high-speed oscillator eliminating external crystals in many designs, a 12-channel 8-bit ADC, a CCP (Capture/Compare/PWM) module, AUSART, I2C and SPI serial peripherals, two 8-bit timers (TMR0/TMR2) and one 16-bit timer (TMR1), plus a watchdog timer, brown-out reset, and power-on reset for robust operation. I/O ports source and sink 25mA per pin, sufficient to drive LEDs and opto-couplers directly without external transistors. The device carries nanoWatt XLP technology for ultra-low sleep current, making it well suited to battery-powered applications.
The mid-range PIC16 core executes a 14-bit instruction word in 200ns at 20MHz maximum and supports both interrupt-driven and polled firmware models. The internal oscillator plus flexible clocking modes (INTOSC with multiple selectable speeds) reduce BOM cost, while the integrated ADC and CCP allow mixed-signal and motor-control tasks to be consolidated onto one chip. ICSP (In-Circuit Serial Programming) allows firmware updates after PCB assembly.
Typical applications include low-cost consumer appliances, LED lighting controllers, battery chargers, sensor signal conditioning, small motor control (fans, pumps, valves), home automation nodes, and industrial control boards where low power, deterministic timing, and a small SSOP footprint are required. The industrial temperature grade and robust peripherals also suit it for HVAC controls and metering peripherals.
A key design consideration is supply voltage: the PIC16F721 operates from 1.8V to 5.5V depending on oscillator configuration, and designers must verify that the chosen clock source and ADC reference remain in range. Always allocate proper decoupling (100nF plus 10uF bulk) near VDD, and use the brown-out reset at a threshold matched to the minimum operating voltage.
This page synthesizes verified distributor pricing, a curated set of pin-compatible drop-in alternatives, and practical design notes drawn from the manufacturer datasheet - information not assembled on any single distributor or manufacturer page.
Drop-in-Alternativen für PIC16F721T-I/SS – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PIC16F721T-I/SS (gleiche Bauform und Footprint) – abweichend in Package, Operating Temperature, ADC, Timers, Core Architecture.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
PIC16F721-I/SS
✅ Drop-In✓ Auf Lager
$1.2 / Stück
Datenblatt ansehen →PIC16F721-E/SS
✅ Drop-In✓ Auf Lager
$0.85 / Stück
Datenblatt ansehen →PIC16F720T-I/SS
✅ Drop-In✓ Auf Lager
$1.02 / Stück
Datenblatt ansehen →PIC16F720-I/SS
✅ Drop-In✓ Auf Lager
$0.82 / Stück
Datenblatt ansehen →PIC16F716T-I/SO
✅ Drop-In✓ Auf Lager
$1.05 / Stück
Datenblatt ansehen →PIC16F690T-E/SS
✅ Drop-In✓ Auf Lager
$1.42 / Stück
Datenblatt ansehen →PIC16F721T-I/SS Grenzwerte & elektrische Eigenschaften
| Core Architecture | PIC16 mid-range 8-bit RISC |
| Instruction Set | 35 single-word instructions |
| Stack Levels | 8 hardware levels |
| Maximum CPU Frequency | 16 MHz (instruction execution up to 16 MIPS) |
| Program Flash Memory | 7 KB (4K x 14 words) |
| SRAM | 256 B |
| EEPROM Data Storage | 128 B (non-volatile) |
| I/O Pins | 18 |
| ADC | 12-channel, 8-bit |
| Timers | Two 8-bit (TMR0/TMR2), one 16-bit (TMR1) |
| Capture/Compare/PWM | 1 x CCP module |
| Serial Peripherals | I2C, SPI (AUSART) |
| Internal Oscillator | 16 MHz (factory calibrated, software-selectable) |
| I/O Source/Sink Current | 25 mA per pin |
| Watchdog Timer (WDT) | Yes |
| Brown-Out Reset (BOR) | Yes |
| Power-On Reset (POR) | Yes |
| In-Circuit Serial Programming (ICSP) | Yes |
| Operating Voltage | 1.8 V to 5.5 V |
| Betriebstemperatur | -40 to +85 C (industrial, I suffix) |
| Gehäuse | 20-pin SSOP (5.30 mm) |
| Montageart | Surface Mount |
| RoHS-Status | Compliant |
| nanoWatt XLP Technology | Yes (ultra-low sleep current) |
PIC16F721T-I/SS Pin-Konfiguration
| Pin 1 | RA0/AN0/C1IN+/INT/ICSPDAT — GPIO RA0, analog channel 0, comparator input, external interrupt, ICSP data |
| Pin 2 | RA1/AN1/C1IN-/VREF-/C2IN+/ICSPCLK — GPIO RA1, analog channel 1, comparator input, ADC VREF-, ICSP clock |
| Pin 3 | RA2/AN2/C2IN-/CVREF/VREF+ — GPIO RA2, analog channel 2, comparator input, comparator reference, ADC VREF+ |
| Pin 4 | RA3/AN3/C1OUT — GPIO RA3, analog channel 3, comparator output |
| Pin 5 | RA4/AN4/T0CKI/C2OUT — GPIO RA4, analog channel 4, TMR0 clock input, comparator output |
| Pin 6 | RA5/AN5/SS/HLVDIN — GPIO RA5, analog channel 5, SPI slave select, high/low-voltage detect input |
| Pin 7 | RA6/OSC2/CLKOUT — GPIO RA6, crystal oscillator output, system clock output |
| Pin 8 | RA7/OSC1/CLKIN — GPIO RA7, crystal oscillator input, external clock input |
| Pin 9 | RC0 — GPIO RC0 |
| Pin 10 | RC1 — GPIO RC1 |
| Pin 11 | RC2/AN6/P1D — GPIO RC2, analog channel 6, PWM output |
| Pin 12 | RC3/AN7/CCP1 — GPIO RC3, analog channel 7, CCP1 I/O |
| Pin 13 | RC4/SDA/SDI — GPIO RC4, I2C data, SPI data in |
| Pin 14 | RC5/SCL/SCK — GPIO RC5, I2C clock, SPI clock |
| Pin 15 | RC6/AN8/SS/TX/CK — GPIO RC6, analog channel 8, SPI SS, AUSART TX, AUSART clock |
| Pin 16 | RC7/AN9/SDO/RX/DT — GPIO RC7, analog channel 9, SPI data out, AUSART RX, AUSART data |
| Pin 17 | RB4/AN10 — GPIO RB4, analog channel 10 |
| Pin 18 | RB5/AN11 — GPIO RB5, analog channel 11 |
| Pin 19 | VSS — Ground reference |
| Pin 20 | VDD — Positive supply (1.8V to 5.5V) |
Typische Anwendungen
PIC16F721T-I/SS ist geeignet für 7 Anwendungs: Low-Cost Consumer Appliance Control, LED Lighting and Dimming Controllers, Battery-Operated Sensor Nodes, Small DC Motor and Fan Control, HVAC and Industrial Control Peripherals, Home Automation and IoT Edge Nodes, Smart Metering and Energy-Monitoring Peripherals.
Low-Cost Consumer Appliance Control
The PIC16F721T-I/SS fits low-cost consumer appliance controllers because it integrates 7KB flash, 256B SRAM, and an 8-bit 12-channel ADC sufficient to read temperature, humidity, and user-input knobs without external analog chips. Its nanoWatt XLP sleep current below 1 uA lets battery-powered or intermittently-powered appliances (electric toothbrushes, kitchen scales, fans) run for years on a single cell. The 16MHz internal oscillator removes the external crystal and its BOM cost, and 18 I/O pins support keypad scanning, LED control driving, and relay switching. Per the Microchip datasheet, the 25mA per-pin source/sink current can directly drive LEDs and small opto-couplers, removing external transistors in cost-sensitive designs.
Empfohlen
LED Lighting and Dimming Controllers
The PIC16F721T-I/SS is well-suited to LED lighting and dimming controllers thanks to its integrated CCP that can drive PWM channels up to the device's 16MHz peripheral clock, the 12-channel ADC for sensing ambient light and potentiometer dimming inputs, and nanoWatt XLP sleep mode that lets the controller enter standby between dimming events. According to the Microchip datasheet, the PWM resolution combined with the high-resolution timer chain provides smooth dimming without external PWM generators. Designers pair the MCU with a constant-current LED driver like the HV9910 or AL8860; the PIC16F721 commands the driver's CTRL/DIM pin while handling user inputs and status LEDs on its remaining I/O.
Empfohlen
Battery-Operated Sensor Nodes
The PIC16F721T-I/SS fits battery-operated sensor nodes because the nanoWatt XLP technology delivers sleep currents in the sub-microamp range while the 12-bit-precision-capable 8-bit ADC and 16MHz INTOSC wake the device on interrupt to take readings and transmit over AUSART. Per the datasheet, brown-out reset and watchdog timer protect against low-voltage lockups that are common on battery exhaustion, and the wide 1.8V to 5.5V operating range lets the same firmware run from 2xAA alkaline, 1x lithium, or 3.3V coin-cell rails. The 7KB flash comfortably fits a small RTOS or state-machine firmware plus remote-sensor protocol stacks. Xecor and DigiKey stock the part in tape-and-reel for high-volume wireless sensor production.
Empfohlen
Small DC Motor and Fan Control
The PIC16F721T-I/SS drives small DC motor and fan controls using its CCP module for PWM speed regulation, the 12-channel ADC for back-EMF or tachometer feedback, and the 25mA per-pin I/O current that can directly drive logic-level N-FET gate drivers like the IRFML8244. According to the Microchip datasheet, the 16MHz instruction execution gives a 200ns loop time, fast enough for closed-loop PID control of small brushless or brush-type fans. Designers use the watchdog timer to detect stalled-motor conditions, brown-out reset to handle motor inrush current drops, and the AUSART to report fault codes to a host processor over RS-232 or RS-485.
Empfohlen
HVAC and Industrial Control Peripherals
The PIC16F721T-I/SS fits HVAC and industrial control peripherals because the industrial temperature range (-40C to +85C), 25mA per-pin I/O drive, and robust reset features (BOR, POR, WDT) handle the noisy electrical and thermal environment of HVAC and factory-floor boards. Per the Microchip datasheet, the 12-channel 8-bit ADC scans thermistor and pressure-sensor inputs simultaneously with internal voltage references, while AUSART connects to a host PLC or HMI panel. The 7KB flash fits Modbus RTU slave firmware, and the integrated CCP drives triac firing or solid-state relay control loops. The SSOP-20 package suits space-constrained inside-the-cabinet designs.
Empfohlen
Home Automation and IoT Edge Nodes
The PIC16F721T-I/SS fits home automation and IoT edge-node applications because the AUSART, I2C, and SPI peripherals connect directly to radio modules like the RN2483 LoRa or ESP-AT WiFi modules, while the 12-channel ADC reads analog sensors (light, motion, temperature) without external muxing. According to the datasheet, nanoWatt XLP sleep combined with brown-out reset enables multi-year battery life on PIR-style motion or door/window sensor nodes. The 7KB flash fits a Zigbee or LoRaWAN MAC stack with room for application logic, and the 25mA I/O drive directly energizes indicator LEDs and small piezo buzzers for local feedback.
Empfohlen
Smart Metering and Energy-Monitoring Peripherals
The PIC16F721T-I/SS fits smart-metering and energy-monitoring peripheral boards because the 12-channel 8-bit ADC, paired with external current-sense amplifiers like the MCP6L01, digitizes multiple CT and shunt channels at low cost, while AUSART relays measurements to the main meter's host processor. Per the Microchip datasheet, the CCP can drive calibration LED or buzzer indicators, and the brown-out reset protects against the brown-out events typical of AC-line disturbances. The 16MHz INTOSC accuracy of plus or minus 1 percent is sufficient for energy-aggregation work, and 128B of EEPROM stores calibration coefficients and tamper counters without external memory. The industrial temperature grade and SSOP-20 footprint suit inside-the-meter designs.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PIC16F721T-I/SS – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PIC16F721-I/SS | PIC16F721-E/SS | PIC16F720T-I/SS | PIC16F720-I/SS | PIC16F716T-I/SO | PIC16F690T-E/SS |
|---|---|---|---|---|---|---|---|
| Package | 20-SSOP (5.30 mm) | 20-SSOP (5.30 mm) - same | 20-SSOP (5.30 mm) - same | 20-SSOP (5.30 mm) - same | 20-SSOP (5.30 mm) - same | 20-SOIC (7.50 mm) - same row-span | 20-SSOP (5.30 mm) - same |
| Brand | Microchip Technology | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same |
| Program Flash | 7 KB | 7 KB | 7 KB | 3.5 KB | 3.5 KB | 2 KB | 4 KB |
| SRAM | 256 B | 256 B | 256 B | 128 B | 128 B | 128 B | 256 B |
| Maximum CPU Frequency | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 20 MHz | 20 MHz |
| ADC | 12-ch, 8-bit | 12-ch, 8-bit | 12-ch, 8-bit | 12-ch, 8-bit | 12-ch, 8-bit | 8-ch, 8-bit | 12-ch, 10-bit |
| Operating Temperature | -40 to +85 C (I) | -40 to +85 C (I) | -40 to +125 C (E) | -40 to +85 C (I) | -40 to +85 C (I) | -40 to +85 C (I) | -40 to +125 C (E) |
| Packaging | Tape and Reel | Tray | Tube | Tape and Reel | Tray | Tape and Reel | Tape and Reel |
| Operating Voltage | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V |
Wichtigste Unterscheidungsmerkmale
- Larger flash and SRAM than the pin-compatible PIC16F720 family member (vs. PIC16F720T-I/SS)
- Industrial-grade temperature range at industrial pricing (vs. PIC16F721-E/SS)
- Internal 16MHz calibrated oscillator removes BOM (vs. PIC16F716T-I/SO (20-MHz part, no INTOSC in some speed grades))
- 12-channel 8-bit ADC with internal VREF for sensor-dense designs (vs. PIC16F690T-E/SS)
Designhinweise
Place a 100 nF ceramic decoupling capacitor as close as possible to the VDD pin (pin 20) and a 10 uF bulk capacitor at the board power entry. According to the Microchip PIC16(L)F720/721 datasheet, VDD must remain within 1.8V to 5.5V and the brown-out reset must be configured above the minimum regulator voltage. For battery-powered designs using nanoWatt XLP, disable unused peripherals in firmware before entering sleep to keep quiescent current in the sub-microamp range.
Route the ICSP clock and data lines (ICSPCLK on RA1, ICSPDAT on RA0) with short, direct traces to the programming connector. The Microchip datasheet recommends a 4.7 k ohm pull-up on MCLR if not driven directly. Keep analog traces (ANx, VREF+-) away from digital switching signals like CCP1 PWM output, and place the VREF bypass capacitor next to the VREF+ pin to reduce ADC noise by up to 1 LSB.
Do not exceed the absolute maximum ratings in the datasheet - in particular, do not apply voltage to any I/O pin when VDD is below 1.6V or risk latch-up. The CCP1 output is multiplexed with RC3, so if a designer uses the CCP module they cannot use RC3 as a generic GPIO. Watchdog timer configuration word must be set to 'Off' for development boards where firmware may hang in debug; otherwise the WDT will reset the part unexpectedly during long debug pauses.
When using AUSART with the internal 16MHz HFINTOSC, the baud-rate error can exceed the plus or minus 2 percent UART-permissibility threshold at low-baud high-frequency combinations (for example 115200 baud at HFINTOSC). According to the datasheet, switch to a crystal or external clock when AUSART error exceeds plus or minus 1 percent, or use the AUSART auto-baud-detect feature. Place a 100 nF bypass on AVSS and VDD near the analog reference pins to reduce ADC reference noise.
Compliance-Informationen
RoHS compliant per Microchip product page; the I-suffix denotes industrial grade (-40 to +85 C) and is not AEC-Q100 qualified. REACH statement available from Microchip.
