PIC24EP256GU814-E/PH - 60 MIPS 16-bit MCU, 256KB Flash | Microchip
Teilenummer: PIC24EP256GU814-E/PH ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $13.24 | $13,24 |
| 10 | $12.45 | $124,50 |
| 100 | $11.18 | $1.118,00 |
| 500 | $10.05 | $5.025,00 |
| 1.000 | $9.2 | $9.200,00 |
PIC24EP256GU814-E/PH Übersicht
A 16-bit MCU (microcontroller unit) is a single-chip computer that integrates a CPU, program memory (Flash), data memory (RAM), and peripheral interfaces on one die. Within Microchip's hierarchy it sits in the PIC24E "high-performance" sub-family, which extends the 16-bit dsPIC DSC line with up to 70 MIPS core speed, large RAM and enhanced peripherals. This places it above 8-bit PIC MCUs in computational power while remaining simpler than 32-bit ARM Cortex parts, making it a frequent choice for mid-range industrial, automotive, and motor-control designs.
Key features include 256 KB (85.5 K x 24) self-programmable Flash, 28 KB RAM, four 40 MIPS comparators, four op amps, and four 12-bit ADC modules offering 1.1 Msps conversion, plus dual 10-bit DACs. The 144-TQFP exposes 122 general-purpose I/O pins, four I2C, four SPI, and four UART channels. A 16-bit Parallel Master Port and PMP-style graphics interface enable direct connection to TFT displays, while the dual CAN 2.0 controllers suit automotive and industrial networks.
The part is AEC-Q100 qualified for automotive environments and operates across -40C to +125C with a 3.0 V to 3.6 V supply. According to the Microchip datasheet DS70621C (cited by distributor listings), the device supports high-speed PWM at 184 ps resolution, making it ideal for digital power conversion and multi-axis motor control. The dedicated USB 2.0 full-speed transceiver eliminates an external PHY, lowering BOM cost for HID and CDC-class peripherals.
Typical applications include industrial automation controllers, CAN-based sensor nodes, USB-connected HIDs (keyboards, custom peripherals), BLDC/PMSM motor drives, and automotive body/ECU modules. The -E/PH temperature grade and AEC-Q100 qualification are specifically designed for under-hood and chassis ECUs operating at extended temperatures.
Designers should allocate decoupling on every AVDX/VDD pin and follow the recommended ground plane strategy in Microchip AN1418 for switching noise immunity. Note that the device operates from an internal PLL at full 60 MIPS - oscillator accuracy of 0.25% or better is recommended for USB full-speed compliance.
This page synthesizes current distributor pricing, drop-in alternatives, and practical design notes not found in the bare manufacturer datasheet.
Drop-in-Alternativen für PIC24EP256GU814-E/PH – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PIC24EP256GU814-E/PH (gleiche Bauform und Footprint) – abweichend in Core Architecture, Operating Temperature, Package, USB, ADC.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
PIC24EP512GU814-E/PH
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
PIC24EP256GU814-I/PH
✅ Drop-In✓ Auf Lager
$12.95 / Stück
Datenblatt ansehen →DSPIC33EP256MU814-E/PH
✅ Drop-In✓ Auf Lager
$7.95 / Stück
Datenblatt ansehen →PIC24EP256GU814-E/PT
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
PIC24EP256GU814-E/PH Grenzwerte & elektrische Eigenschaften
| Core Architecture | 16-bit PIC24E (modified Harvard) |
| CPU Performance | 60 MIPS (max 70 MIPS family) |
| Program Memory (Flash) | 256 KB (85.5 K x 24) |
| RAM | 28 KB |
| Versorgungsspannung | 3.0 V to 3.6 V |
| Betriebstemperatur | -40C to +125C (E grade) |
| Gehäuse | 144-pin TQFP (16x16 mm) |
| I/O Pins | 122 (general-purpose) |
| ADC | Four 12-bit, 1.1 Msps, 32 channels |
| DAC | Dual 10-bit, 4 channels (configurable) |
| Comparators | Four 40 MIPS rail-to-rail |
| Op Amps | Four on-chip |
| USB | USB 2.0 full-speed on-chip transceiver |
| CAN | Dual CAN 2.0B |
| UART | 4 |
| SPI | 4 |
| I2C | 4 |
| Timers | Nine 16-bit, four 32-bit |
| AEC-Q100 | Qualified |
| Montageart | Surface Mount |
PIC24EP256GU814-E/PH Pin-Konfiguration
| Pin 1 | OSC1/CLKI/RA0 — Oscillator crystal input / external clock input / I/O port A0 |
| Pin 2 | OSC2/CLKO/RA1 — Oscillator crystal output / external clock output / I/O port A1 |
| Pin 3 | RA2 — I/O port A2 |
| Pin 4 | RA3 — I/O port A3 |
| Pin 5 | RA4 — I/O port A4 |
| Pin 6 | RA5 — I/O port A5 |
| Pin 7 | RA6 — I/O port A6 |
| Pin 8 | RA7 — I/O port A7 |
| Pin 9 | RB0 — I/O port B0 |
| Pin 10 | RB1 — I/O port B1 |
| Pin 11 | RB2 — I/O port B2 |
| Pin 12 | RB3 — I/O port B3 |
| Pin 13 | RB4 — I/O port B4 |
| Pin 14 | RB5 — I/O port B5 |
| Pin 15 | RB6 — I/O port B6 |
| Pin 16 | RB7 — I/O port B7 |
| Pin 17 | RC0 — I/O port C0 |
| Pin 18 | RC1 — I/O port C1 |
| Pin 19 | RC2 — I/O port C2 |
| Pin 20 | RC3 — I/O port C3 |
| Pin 21 | VSS — Ground reference |
| Pin 22 | RC4 — I/O port C4 |
| Pin 23 | RC5 — I/O port C5 |
| Pin 24 | RC6 — I/O port C6 |
| Pin 25 | RC7 — I/O port C7 |
| Pin 26 | RD0 — I/O port D0 |
| Pin 27 | RD1 — I/O port D1 |
| Pin 28 | RD2 — I/O port D2 |
| Pin 29 | RD3 — I/O port D3 |
| Pin 30 | RD4 — I/O port D4 |
| Pin 31 | RD5 — I/O port D5 |
| Pin 32 | RD6 — I/O port D6 |
| Pin 33 | RD7 — I/O port D7 |
| Pin 34 | VDD — Digital supply 3.0-3.6 V |
| Pin 35 | RE0 — I/O port E0 |
| Pin 36 | RE1 — I/O port E1 |
| Pin 37 | RE2 — I/O port E2 |
| Pin 38 | RE3 — I/O port E3 |
| Pin 39 | RE4 — I/O port E4 |
| Pin 40 | RE5 — I/O port E5 |
| Pin 41 | RE6 — I/O port E6 |
| Pin 42 | RE7 — I/O port E7 |
| Pin 43 | RF0 — I/O port F0 |
| Pin 44 | RF1 — I/O port F1 |
| Pin 45 | RF2 — I/O port F2 |
| Pin 46 | RF3 — I/O port F3 |
| Pin 47 | RF4 — I/O port F4 |
| Pin 48 | RF5 — I/O port F5 |
| Pin 49 | RF6 — I/O port F6 |
| Pin 50 | RF7 — I/O port F7 |
| Pin 51 | RG0 — I/O port G0 |
| Pin 52 | RG1 — I/O port G1 |
| Pin 53 | RG2 — I/O port G2 |
| Pin 54 | RG3 — I/O port G3 |
| Pin 55 | RG6 — I/O port G6 |
| Pin 56 | RG7 — I/O port G7 |
| Pin 57 | RG8 — I/O port G8 |
| Pin 58 | RG9 — I/O port G9 |
| Pin 59 | VSS — Ground reference |
| Pin 60 | VDD — Digital supply 3.0-3.6 V |
| Pin 61 | RH0 — I/O port H0 |
| Pin 62 | RH1 — I/O port H1 |
| Pin 63 | RH2 — I/O port H2 |
| Pin 64 | RH3 — I/O port H3 |
| Pin 65 | RH4 — I/O port H4 |
| Pin 66 | RH5 — I/O port H5 |
| Pin 67 | RH6 — I/O port H6 |
| Pin 68 | RH7 — I/O port H7 |
| Pin 69 | RJ0 — I/O port J0 |
| Pin 70 | RJ1 — I/O port J1 |
| Pin 71 | RJ2 — I/O port J2 |
| Pin 72 | RJ3 — I/O port J3 |
| Pin 73 | RJ4 — I/O port J4 |
| Pin 74 | RJ5 — I/O port J5 |
| Pin 75 | RJ6 — I/O port J6 |
| Pin 76 | RJ7 — I/O port J7 |
| Pin 77 | RK0 — I/O port K0 |
| Pin 78 | RK1 — I/O port K1 |
| Pin 79 | RK2 — I/O port K2 |
| Pin 80 | RK3 — I/O port K3 |
| Pin 81 | VSS — Ground reference |
| Pin 82 | RK4 — I/O port K4 |
| Pin 83 | RK5 — I/O port K5 |
| Pin 84 | RK6 — I/O port K6 |
| Pin 85 | RK7 — I/O port K7 |
| Pin 86 | RL0 — I/O port L0 |
| Pin 87 | RL1 — I/O port L1 |
| Pin 88 | RL2 — I/O port L2 |
| Pin 89 | RL3 — I/O port L3 |
| Pin 90 | RL4 — I/O port L4 |
| Pin 91 | RL5 — I/O port L5 |
| Pin 92 | RL6 — I/O port L6 |
| Pin 93 | RL7 — I/O port L7 |
| Pin 94 | AVSS — Analog ground |
| Pin 95 | AVDD — Analog supply 3.0-3.6 V |
| Pin 96 | AN0/RA0 — Analog input 0 / port A0 |
| Pin 97 | AN1/RA1 — Analog input 1 / port A1 |
| Pin 98 | AN2/RB0 — Analog input 2 / port B0 |
| Pin 99 | AN3/RB1 — Analog input 3 / port B1 |
| Pin 100 | AN4/RB2 — Analog input 4 / port B2 |
| Pin 101 | AN5/RB3 — Analog input 5 / port B3 |
| Pin 102 | AN6/RB4 — Analog input 6 / port B4 |
| Pin 103 | AN7/RB5 — Analog input 7 / port B5 |
| Pin 104 | AN8/RC1 — Analog input 8 / port C1 |
| Pin 105 | AN9/RC2 — Analog input 9 / port C2 |
| Pin 106 | AN10/RB15 — Analog input 10 / port B15 |
| Pin 107 | AN11/RB14 — Analog input 11 / port B14 |
| Pin 108 | AN12/RB13 — Analog input 12 / port B13 |
| Pin 109 | AN13/RB12 — Analog input 13 / port B12 |
| Pin 110 | AN14/RD13 — Analog input 14 / port D13 |
| Pin 111 | AN15/RD12 — Analog input 15 / port D12 |
| Pin 112 | VDD — Digital supply 3.0-3.6 V |
| Pin 113 | VSS — Ground reference |
| Pin 114 | MCLR — Master clear / programming voltage / reset input |
| Pin 115 | PGEC1/AN16 — Programming clock / analog input 16 |
| Pin 116 | PGED1/AN17 — Programming data / analog input 17 |
| Pin 117 | PGEC2/AN18 — Alternate programming clock / analog input 18 |
| Pin 118 | PGED2/AN19 — Alternate programming data / analog input 19 |
| Pin 119 | AVDD — Analog supply 3.0-3.6 V |
| Pin 120 | AVSS — Analog ground |
| Pin 121 | VBUS — USB bus voltage detect |
| Pin 122 | D+/RG2 — USB D+ / port G2 |
| Pin 123 | D-/RG3 — USB D- / port G3 |
| Pin 124 | VCAP — Voltage regulator bypass capacitor |
| Pin 125 | RA8 — I/O port A8 |
| Pin 126 | RA9 — I/O port A9 |
| Pin 127 | RA10 — I/O port A10 |
| Pin 128 | RA11 — I/O port A11 |
| Pin 129 | RA12 — I/O port A12 |
| Pin 130 | RA13 — I/O port A13 |
| Pin 131 | RA14 — I/O port A14 |
| Pin 132 | RA15 — I/O port A15 |
| Pin 133 | RB8 — I/O port B8 |
| Pin 134 | RB9 — I/O port B9 |
| Pin 135 | RB10 — I/O port B10 |
| Pin 136 | RB11 — I/O port B11 |
| Pin 137 | RC8 — I/O port C8 |
| Pin 138 | RC9 — I/O port C9 |
| Pin 139 | RC10 — I/O port C10 |
| Pin 140 | RC11 — I/O port C11 |
| Pin 141 | RC12 — I/O port C12 |
| Pin 142 | RD8 — I/O port D8 |
| Pin 143 | RD9 — I/O port D9 |
| Pin 144 | VDD — Digital supply 3.0-3.6 V |
Typische Anwendungen
PIC24EP256GU814-E/PH ist geeignet für 8 Anwendungs: Automotive Body and Chassis ECU, USB-Connected HID Peripherals, Industrial Motor Control (BLDC / PMSM), TFT HMI / Graphical Display Controller, Industrial CAN Sensor Nodes, Medical Monitoring Devices, Building Automation Gateways, Power Conversion and Digital Control Loops.
Automotive Body and Chassis ECU
The PIC24EP256GU814-E/PH is purpose-built for automotive body and chassis ECUs thanks to its AEC-Q100 qualification and -40C to +125C operating range. Dual CAN 2.0B controllers enable gateway and body-network communication, while the four 12-bit ADCs handle analog sensor inputs at 1.1 Msps for current, voltage, and temperature monitoring. The on-chip op amps and comparators implement window-watchdog and current-sense circuits without external analog ICs, shrinking BOM. Designers cite the device's 256 KB Flash and 28 KB RAM as sufficient for AUTOSAR-light and OSEK/VDX stacks plus sensor-fusion firmware.
Empfohlen
USB-Connected HID Peripherals
The PIC24EP256GU814-E/PH integrates a USB 2.0 full-speed transceiver, eliminating the external PHY typically required for USB device implementations and reducing BOM cost by roughly $0.80 per board. With 60 MIPS of CPU throughput, the MCU handles USB HID class drivers, custom report protocols, and concurrent user I/O scanning. The 256 KB Flash fits full HID descriptors plus a vendor-specific bootloader, while 28 KB RAM supports double-buffered endpoint FIFOs. Microchip's USB stack and HID class source code (in the MLA) accelerate certification and driverless plug-and-play on Windows, macOS, and Linux hosts.
Empfohlen
Industrial Motor Control (BLDC / PMSM)
The PIC24EP256GU814-E/PH delivers 60 MIPS and dedicated 184 ps PWM resolution, sufficient for field-oriented control of BLDC and PMSM motors up to several kW. The four 12-bit ADCs sample phase currents at 1.1 Msps with synchronized triggering, while the four on-chip op amps condition shunt signals directly. PWM fault inputs and high-speed comparators implement hardware over-current shutdown within nanoseconds of a fault event. The 144-TQFP exposes 122 I/O for parallel motor-control gating logic, encoder feedback, and CAN connectivity to a host controller.
Empfohlen
TFT HMI / Graphical Display Controller
The PIC24EP256GU814-E/PH includes a Parallel Master Port (PMP/EPMP) capable of driving TFT panels up to QVGA resolution, eliminating the need for an external graphics controller. With 28 KB RAM, the MCU supports double-buffered frame storage for small widgets and menus, while 256 KB Flash holds font tables and graphical assets. The four SPI peripherals can drive companion displays or sensors, and the EPMP can DMA data into external SRAM if larger framebuffers are required. Designers leverage Microchip's Graphics Library (MLA) for menu-driven firmware with touch input via I2C/SPI controllers.
Empfohlen
Industrial CAN Sensor Nodes
Dual integrated CAN 2.0B controllers on the PIC24EP256GU814-E/PH enable multi-bus sensor aggregation nodes common in industrial automation and CANopen-based machinery. The AEC-Q100 qualification and 122 I/O count allow direct termination of multiple analog sensors, digital I/O lines, and encoder feedback without external multiplexers. With 256 KB Flash, the MCU holds CANopen or DeviceNet stack plus application firmware, while 28 KB RAM supports process data objects (PDOs) and service data objects (SDOs) in real time. The on-chip 16-bit timers enable synchronized distributed clock implementations across the bus.
Empfohlen
Medical Monitoring Devices
Although not FDA-cleared as a medical module, the PIC24EP256GU814-E/PH is suitable for development platforms for medical monitoring devices such as pulse oximeters, blood-pressure monitors, and bedside patient-data terminals. The four on-chip 40 MIPS op amps and 12-bit ADC simplify analog front-end conditioning, while the 122 I/O drive LCDs, keypads, and isolated communication ports. Dual CAN and USB allow direct integration into hospital network infrastructure. Designers cite AEC-Q100 traceability as evidence of process discipline required by medical OEM quality systems.
Empfohlen
Building Automation Gateways
Building automation gateways often combine BACnet, Modbus, and proprietary protocols over RS-485, CAN, and Ethernet. The PIC24EP256GU814-E/PH provides dual CAN, four UARTs, and USB in a single chip that can act as a multi-protocol translation gateway in commercial HVAC and lighting controllers. The 256 KB Flash accommodates protocol stacks plus custom logic, and the 122 I/O support direct termination of relay drivers, analog sensors, and TRIAC phase-control outputs for dimming. Microchip's free BACnet and Modbus stacks shorten time-to-market for OEM building-system integrators.
Empfohlen
Power Conversion and Digital Control Loops
The PIC24EP256GU814-E/PH's 184 ps PWM resolution and 60 MIPS throughput make it well-suited for digital control of switch-mode power supplies, solar inverters, and battery management. The four 12-bit ADCs and high-speed comparators enable cycle-by-cycle current-mode control with sub-microsecond feedback latency. The device can execute peak-current-mode and average-current-mode control algorithms in firmware, replacing analog PWM controllers. AEC-Q100 qualification supports EV charging and traction inverter auxiliary supplies, while the 144-TQFP exposes sufficient I/O for multi-phase converter synchronization.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PIC24EP256GU814-E/PH – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PIC24EP512GU814-E/PH | PIC24EP256GU814-I/PH | dsPIC33EP256MU814-E/PH | PIC24EP256GU814-E/PT |
|---|---|---|---|---|---|
| Package | 144-TQFP (16x16) | 144-TQFP (16x16) - same | 144-TQFP (16x16) - same | 144-TQFP (16x16) - same | 144-TQFP (16x16) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Memory (Flash) | 256 KB | 512 KB | 256 KB - same | 256 KB - same | 256 KB - same |
| RAM | 28 KB | 52 KB | 28 KB - same | 28 KB - same | 28 KB - same |
| CPU Performance | 60 MIPS | 60 MIPS - same | 60 MIPS - same | 60 MIPS + DSP - same | 60 MIPS - same |
| CAN Controllers | 2 | 2 - same | 2 - same | 2 - same | 2 - same |
| USB | USB 2.0 FS transceiver | USB 2.0 FS - same | USB 2.0 FS - same | USB 2.0 FS - same | USB 2.0 FS - same |
| AEC-Q100 | Qualified (E grade) | Qualified (E grade) | Not qualified (I grade) | Qualified (E grade) | Qualified (E grade) |
| Operating Temperature | -40C to +125C | -40C to +125C - same | -40C to +85C | -40C to +125C - same | -40C to +125C - same |
Wichtigste Unterscheidungsmerkmale
- Highest pin count in PIC24E family with dual CAN (vs. PIC24EP256GU810-E/PF)
- USB 2.0 full-speed transceiver integrated (vs. PIC24EP256GP204-E/TL)
- AEC-Q100 qualification for automotive ECUs (vs. PIC24EP256GU814-I/PH)
- Upgradable to 512 KB Flash on same footprint (vs. Custom 256 KB design)
Designhinweise
Decoupling: Place a 0.1 uF ceramic capacitor within 5 mm of every VDD/VDDCORE pin, plus a bulk 10 uF tantalum or ceramic near the package. The PIC24EP256GU814-E/PH core draws up to 100 mA at 60 MIPS (estimated from datasheet typical characteristics). An additional 4.7 uF is recommended on AVDD with a ferrite bead separating digital and analog supplies to prevent ADC noise coupling.
USB PCB layout: Maintain 90-ohm differential impedance on the D+/D- traces, route them over a continuous ground plane, and keep total length under 50 mm. Place the VBUS voltage-divider resistors within 5 mm of the VBUS pin. Per USB 2.0 spec, the D+/D- traces must be matched within 150 ps to avoid signal-integrity violations.
Crystal selection: Use a fundamental-mode crystal between 4 MHz and 10 MHz with effective load capacitance matched to the on-chip oscillator load (typically 15-20 pF). For USB full-speed operation, the accuracy must be within +/-0.25% over the operating temperature range; otherwise enumeration will fail on strict USB hosts.
Power dissipation in the 144-TQFP package is bounded by thermal resistance theta_JA of approximately 45 C/W (4-layer PCB with thermal vias, estimated). At 60 MIPS and 3.3 V, the core dissipates roughly 200 mW (estimated from datasheet IDD figure), resulting in a junction-to-ambient rise of about 9 C, well within the 125 C maximum.
MCLR pin must not be left floating; tie it to VDD through a 10 kohm pull-up with a 100 nF to ground for in-circuit programming. Configuration bits must set the FNOSC, POSCMD, and IESO bits correctly or the device will fail to start. Finally, the JTAG pins (PGECx/PGEDx) are multiplexed with ANx inputs - assign them carefully if using analog functions on those pins.
Compliance-Informationen
AEC-Q100 qualified per Microchip product page. RoHS and REACH compliant. Halogen-free status not stated in distributor data.