PIC24EP32GP204-E/PT - 60 MIPS 16-Bit MCU | Microchip
Teilenummer: PIC24EP32GP204-E/PT ✓ AktivPIC24EP32GP204-E/PT Übersicht
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. PIC24EP devices belong to the 16-bit microcontroller hierarchy and combine digital control with analog functions such as operational amplifiers, comparators, CTMU, and an ADC. This integration allows a compact design to acquire measurements, execute control algorithms, and drive outputs without requiring several separate analog and digital ICs.
The PIC24EP32GP204-E/PT provides 32 KB Flash and 4 KB SRAM, along with high-speed PWM and advanced analog resources. Its operational amplifiers and comparators are useful for signal conditioning, threshold detection, and closed-loop control. The CTMU supports accurate timing and capacitive-sensing functions, while the Peripheral Trigger Generator helps synchronize timing-sensitive outputs with other peripherals.
At the device level, the PIC24E core supports up to 70 MIPS across the family, while the exact PIC24EP32GP204-E/PT listing identifies a 60 MIPS operating rate. Its integrated analog resources reduce board area by placing common signal-conditioning functions beside the processor. Digital peripherals and analog functions can therefore operate from a coordinated device architecture, simplifying firmware control and reducing inter-component communication overhead.
Typical uses include industrial sensor controllers, motor-control systems, power-conversion equipment, data-acquisition modules, and embedded measurement instruments. The 32 KB Flash capacity is suitable for moderate control applications, while the 4 KB SRAM supports working variables, buffers, and peripheral state. For designs requiring different pin assignments, specialized analog performance, or additional memory, engineers should compare the complete device pin definition before finalizing the PCB footprint.
A 44-pin TQFP provides accessible leads for inspection and prototype assembly, but it occupies more board area than a leadless package. Decoupling capacitors should be placed directly beside the appropriate power pins, while the exposed analog and digital ground strategy should follow the pin-description and layout guidance in the manufacturer datasheet. Confirm programming, clock, and peripheral assignments for the exact suffix before releasing production firmware.
This product page consolidates the exact orderable MPN, package information, memory and performance characteristics, pin-compatible family alternatives, and application-oriented design guidance. It is intended to support component selection, PCB planning, firmware preparation, and qualification without replacing the manufacturer’s complete pin, electrical, and programming documentation.
Drop-in-Alternativen für PIC24EP32GP204-E/PT – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PIC24EP32GP204-E/PT (gleiche Bauform und Footprint) – abweichend in ADC, Package, CTMU, CPU Speed, Core Architecture.
PIC24EP32GP204-H/PT
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →PIC24EP32GP204-I/PT
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →PIC24EP32GP204-E/PT Grenzwerte & elektrische Eigenschaften
| Product Type | 16-bit general-purpose microcontroller |
| Maximum CPU Speed | 60 MIPS |
| Family Core Capability | Up to 70 MIPS |
| Program Memory | 32 KB Flash |
| Program Memory Organization | 10.7K x 24 words |
| Data Memory | 4 KB RAM |
| Gehäuse | 44-pin TQFP |
| Package Dimensions | 10 x 10 mm |
| Montageart | Surface mount |
| Integrated Operational Amplifiers | Yes |
| Integrated Comparators | Yes |
| CTMU | Yes |
| Peripheral Trigger Generator | Yes |
| ADC | Yes |
| PWM | High-speed PWM |
| Temperature Grade | -40°C to +125°C |
PIC24EP32GP204-E/PT 10 x 10 mm Pinbelegungsleitfaden
Pinbelegung für PIC24EP32GP204-E/PT (10 x 10 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für PIC24EP32GP204-E/PT.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
PIC24EP32GP204-E/PT ist geeignet für 6 Anwendungs: Industrial Sensor Controller, Motor and Power Control, Data Acquisition Module, Battery-Powered Embedded System, Capacitive Sensing System, Programmable Logic Controller.
Industrial Sensor Controller
The PIC24EP32GP204-E/PT fits industrial sensor controllers that combine analog measurement with real-time digital processing. Its 60 MIPS core provides useful headroom for filtering, calibration, and communication tasks, while the 32 KB Flash and 4 KB RAM support compact embedded firmware. The integrated ADC, operational amplifiers, and comparators can condition sensor signals close to the sensing element, reducing noise exposure and board complexity. Its -40°C to 125°C grade supports equipment operating across industrial temperature conditions. Designers should budget analog and digital supply filtering, follow the recommended decoupling layout, and verify input ranges against the datasheet before connecting field sensors.
Empfohlen
Motor and Power Control
The PIC24EP32GP204-E/PT is appropriate for compact motor-control and power-conversion subsystems that require fast control calculations and flexible analog support. The 60 MIPS PIC24EP core can execute PWM updates, current-control routines, and supervisory logic, while the high-speed PWM peripheral reduces reliance on software timing. Internal comparators and operational amplifiers support current sensing and feedback-loop conditioning near the MCU. The 32 KB Flash accommodates control tables and fault handlers, and the 4 KB RAM supports control variables and diagnostic buffers. The -E temperature grade covers demanding industrial environments, but motor systems still require external power-stage protection, isolated sensing where applicable, and careful grounding between analog and digital circuits.
Empfohlen
Data Acquisition Module
The PIC24EP32GP204-E/PT can form the control core of a compact data-acquisition module combining an ADC, signal conditioning, and embedded processing. Its 60 MIPS execution rate supports sample processing, calibration, digital filtering, and packet preparation, while 32 KB Flash and 4 KB RAM are sufficient for moderate channel counts and configurable acquisition firmware. The integrated operational amplifiers and comparators reduce the number of external analog components needed for input buffering and threshold detection. CTMU-based functions can also support precise timing or capacitive measurements. For instrumentation designs, preserve analog supply integrity, use a low-noise reference strategy, and separate sensitive input routing from high-current switching nodes to prevent measurement errors.
Empfohlen
Battery-Powered Embedded System
The PIC24EP32GP204-E/PT is suitable for battery-powered embedded instrumentation where mixed signal processing and autonomous control are required in one device. Its 60 MIPS core allows active filtering and sensor fusion without a separate digital processor, while the integrated ADC, operational amplifiers, comparators, and CTMU can reduce external component count. The 32 KB Flash stores application firmware and calibration data, and the 4 KB SRAM supports acquisition buffers and state management. Power budgeting should account for analog and digital supply currents at the selected clock and peripheral operating states. Low-power modes, peripheral disable rules, and wake-up sources should be configured explicitly rather than relying only on the nominal processor speed.
Empfohlen
Capacitive Sensing System
The PIC24EP32GP204-E/PT can implement capacitive-touch or timing-based sensing with its CTMU, ADC, comparators, and high-speed processing core. The 60 MIPS rate supports oversampling, baseline tracking, filtering, and user-interface logic, while 32 KB Flash is adequate for calibration tables and gesture or threshold algorithms. The 4 KB RAM provides space for multiple channel baselines and debounce states. Designers should follow the CTMU connection and compensation guidance in the manufacturer data sheet because electrode routing, guard structures, and PCB contamination directly affect measurement stability. Also confirm that the selected analog reference and supply arrangement meet the required timing accuracy before high-volume calibration.
Empfohlen
Programmable Logic Controller
The PIC24EP32GP204-E/PT can serve as the central controller in a small programmable logic or machine-control module. Its 60 MIPS core supports deterministic scanning, communication handling, and event processing, while the integrated ADC and comparators support process inputs and protective thresholds. The high-speed PWM output is useful for proportional control, indicators, or actuator drives, and 32 KB Flash plus 4 KB RAM permits moderate logic capacity without an external processor. The extended -40°C to 125°C temperature range is appropriate for industrial enclosures, subject to overall equipment qualification. Firmware should include watchdog recovery, safe output states during startup, and diagnostic coverage for stuck sensors or communication loss to improve system resilience.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PIC24EP32GP204-E/PT – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PIC24EP32GP204-H/PT | PIC24EP32GP204-I/PT |
|---|---|---|---|
| Package | 44-pin TQFP (10 x 10 mm) | 44-pin TQFP (10 x 10 mm) | 44-pin TQFP (10 x 10 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Performance | 60 MIPS | 60 MIPS | 60 MIPS |
| Program Memory | 32 KB Flash | 32 KB Flash | 32 KB Flash |
| Data Memory | 4 KB RAM | 4 KB RAM | 4 KB RAM |
| Maximum Operating Temperature | 125°C | 150°C | 85°C |
| Minimum Operating Temperature | -40°C | -40°C | -40°C |
| Integrated Analog Resources | Operational amplifiers, comparators, CTMU and ADC | Operational amplifiers, comparators, CTMU and ADC | Operational amplifiers, comparators, CTMU and ADC |
| Core Type | 16-bit PIC24EP | 16-bit PIC24EP | 16-bit PIC24EP |
| Peripheral Trigger Generator | Yes | Yes | Yes |
Wichtigste Unterscheidungsmerkmale
- Higher temperature capability than the industrial I grade (vs. PIC24EP32GP204-I/PT)
- Lower temperature ceiling than the H grade for cost-sensitive industrial designs (vs. PIC24EP32GP204-H/PT)
- Integrated analog and timing resources reduce external circuitry (vs. PIC24EP32GP204-I/PT)
- Same 44-pin footprint allows a practical temperature-grade transition (vs. PIC24EP32GP204-H/PT)
Designhinweise
Place every supply bypass capacitor directly between its associated power pin and the nearest appropriate ground reference. Keep traces short, use the capacitance and voltage ratings specified by the manufacturer, and avoid routing sensitive analog inputs beneath digital clocks, PWM outputs, or high-current return paths. The 44-pin TQFP footprint should be checked against the exact /PT package drawing before symbol and footprint release.
Use the manufacturer’s recommended analog-ground and digital-ground connection strategy rather than treating every ground pin as interchangeable. Analog inputs to the ADC, comparators, and operational amplifiers should be short, guarded where appropriate, and physically separated from switching and PWM traces. Decoupling layout matters because the CTMU, ADC, and internal amplifiers can be sensitive to supply ripple even when the MCU performs computation correctly.
Do not substitute the /PT device for a QFN package option solely because both provide 44 pins; package outlines, exposed pads, and pin assignments differ. Also verify the temperature-grade requirement before using a lower-grade replacement: PIC24EP32GP204-I/PT is limited to 85°C, whereas the E grade reaches 125°C. Validate clock configuration, peripheral pin multiplexing, programming, and boot behavior after any suffix change.
Separate core, digital, and analog supply requirements when planning the power tree. Check the maximum supply voltage, decoupling requirements, and current limits in the manufacturer data sheet before adding external regulators or test instrumentation. For battery-powered products, measure the complete sleep, active, conversion, and communication states because peripheral configuration can materially change total energy consumption.
Compliance-Informationen
The PIC24EP32GP204-E/PT is an industrial-temperature microcontroller rather than an AEC-Q100 automotive-qualified variant. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation or declaration of compliance.