Microchip Technology

PIC24EP32GP204-E/PT - 60 MIPS 16-Bit MCU | Microchip

MPN: PIC24EP32GP204-E/PT ✓ Nakahanda
44-pin TQFP Package 60 MIPS Speed 32 KB Flash Memory
MOQ: 1 |

PIC24EP32GP204-E/PT Ulas

The Microchip Technology PIC24EP32GP204-E/PT is a 16-bit PIC24EP general-purpose microcontroller featuring a 60 MIPS core, 32 KB of Flash program memory, and 4 KB of SRAM in a 44-pin TQFP package measuring 10 x 10 mm. The -E grade is intended for extended-temperature industrial operation, while the /PT suffix identifies the specified 44-pin package configuration.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. PIC24EP devices belong to the 16-bit microcontroller hierarchy and combine digital control with analog functions such as operational amplifiers, comparators, CTMU, and an ADC. This integration allows a compact design to acquire measurements, execute control algorithms, and drive outputs without requiring several separate analog and digital ICs.

The PIC24EP32GP204-E/PT provides 32 KB Flash and 4 KB SRAM, along with high-speed PWM and advanced analog resources. Its operational amplifiers and comparators are useful for signal conditioning, threshold detection, and closed-loop control. The CTMU supports accurate timing and capacitive-sensing functions, while the Peripheral Trigger Generator helps synchronize timing-sensitive outputs with other peripherals.

At the device level, the PIC24E core supports up to 70 MIPS across the family, while the exact PIC24EP32GP204-E/PT listing identifies a 60 MIPS operating rate. Its integrated analog resources reduce board area by placing common signal-conditioning functions beside the processor. Digital peripherals and analog functions can therefore operate from a coordinated device architecture, simplifying firmware control and reducing inter-component communication overhead.

Typical uses include industrial sensor controllers, motor-control systems, power-conversion equipment, data-acquisition modules, and embedded measurement instruments. The 32 KB Flash capacity is suitable for moderate control applications, while the 4 KB SRAM supports working variables, buffers, and peripheral state. For designs requiring different pin assignments, specialized analog performance, or additional memory, engineers should compare the complete device pin definition before finalizing the PCB footprint.

A 44-pin TQFP provides accessible leads for inspection and prototype assembly, but it occupies more board area than a leadless package. Decoupling capacitors should be placed directly beside the appropriate power pins, while the exposed analog and digital ground strategy should follow the pin-description and layout guidance in the manufacturer datasheet. Confirm programming, clock, and peripheral assignments for the exact suffix before releasing production firmware.

This product page consolidates the exact orderable MPN, package information, memory and performance characteristics, pin-compatible family alternatives, and application-oriented design guidance. It is intended to support component selection, PCB planning, firmware preparation, and qualification without replacing the manufacturer’s complete pin, electrical, and programming documentation.

Mga alternatibo na pwedeng ilagay na PIC24EP32GP204-E/PT — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok PIC24EP32GP204-E/PT (parehas na form factor at footprint) — pagkakaiba sa ADC, Package, CTMU, CPU Speed, Core Architecture.

Microchip Technology
ADC: 10-bit, up to 9 channels, 1.1 Msps
Package: 44-pin TQFP (PT)
CTMU: Yes (Charge Time Measurement Unit)
Microchip Technology
ADC: 10/12-bit, up to 500 ksps
Package: 44-pin TQFP (PT), 10x10 mm
CPU Speed: 70 MIPS (70 MHz max)

PIC24EP32GP204-H/PT

✅ Drop-In
Microchip Technology
📦 44-pin TQFP (10 x 10 mm)
PIC24E (16-bit modified Harvard) · 70 MIPS · 32 KB · 4 KB · 3.0 V to 3.6 V · -40C to +150C · 44-pin TQFP (PT) · 10-bit, up to 9 channels, 1.1 Msps

Magkontak para sa presyo

Tingnan ang Datasheet →

PIC24EP32GP204-I/PT

✅ Drop-In
Microchip Technology
📦 44-pin TQFP (10 x 10 mm)
16-bit PIC24E enhanced Harvard · 70 MIPS (70 MHz max) · 32 KB (10.7K x 24) · 4 KB · 10/12-bit, up to 500 ksps · Yes (on-chip) · Yes · Yes

Magkontak para sa presyo

Tingnan ang Datasheet →

PIC24EP32GP204-E/PT Mga Pinakamataas na Rating at Electrical Characteristics

Product Type 16-bit general-purpose microcontroller
Maximum CPU Speed 60 MIPS
Family Core Capability Up to 70 MIPS
Program Memory 32 KB Flash
Program Memory Organization 10.7K x 24 words
Data Memory 4 KB RAM
Packhaging 44-pin TQFP
Package Dimensions 10 x 10 mm
Uri ng Pagpapasok Surface mount
Integrated Operational Amplifiers Yes
Integrated Comparators Yes
CTMU Yes
Peripheral Trigger Generator Yes
ADC Yes
PWM High-speed PWM
Temperature Grade -40°C to +125°C

Gabay sa Pin Configuration ng PIC24EP32GP204-E/PT 10 x 10 mm

Pin configuration para sa PIC24EP32GP204-E/PT (10 x 10 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 10 x 10 mm package para sa PIC24EP32GP204-E/PT

Wala ng detalyadong pinout data na magagamit para sa PIC24EP32GP204-E/PT.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

PIC24EP32GP204-E/PT ay nararapat para sa 6 aplikasyons: Industrial Sensor Controller, Motor and Power Control, Data Acquisition Module, Battery-Powered Embedded System, Capacitive Sensing System, Programmable Logic Controller.

🏭

Industrial Sensor Controller

The PIC24EP32GP204-E/PT fits industrial sensor controllers that combine analog measurement with real-time digital processing. Its 60 MIPS core provides useful headroom for filtering, calibration, and communication tasks, while the 32 KB Flash and 4 KB RAM support compact embedded firmware. The integrated ADC, operational amplifiers, and comparators can condition sensor signals close to the sensing element, reducing noise exposure and board complexity. Its -40°C to 125°C grade supports equipment operating across industrial temperature conditions. Designers should budget analog and digital supply filtering, follow the recommended decoupling layout, and verify input ranges against the datasheet before connecting field sensors.

⚡

Motor and Power Control

The PIC24EP32GP204-E/PT is appropriate for compact motor-control and power-conversion subsystems that require fast control calculations and flexible analog support. The 60 MIPS PIC24EP core can execute PWM updates, current-control routines, and supervisory logic, while the high-speed PWM peripheral reduces reliance on software timing. Internal comparators and operational amplifiers support current sensing and feedback-loop conditioning near the MCU. The 32 KB Flash accommodates control tables and fault handlers, and the 4 KB RAM supports control variables and diagnostic buffers. The -E temperature grade covers demanding industrial environments, but motor systems still require external power-stage protection, isolated sensing where applicable, and careful grounding between analog and digital circuits.

🖥️

Data Acquisition Module

The PIC24EP32GP204-E/PT can form the control core of a compact data-acquisition module combining an ADC, signal conditioning, and embedded processing. Its 60 MIPS execution rate supports sample processing, calibration, digital filtering, and packet preparation, while 32 KB Flash and 4 KB RAM are sufficient for moderate channel counts and configurable acquisition firmware. The integrated operational amplifiers and comparators reduce the number of external analog components needed for input buffering and threshold detection. CTMU-based functions can also support precise timing or capacitive measurements. For instrumentation designs, preserve analog supply integrity, use a low-noise reference strategy, and separate sensitive input routing from high-current switching nodes to prevent measurement errors.

📱

Battery-Powered Embedded System

The PIC24EP32GP204-E/PT is suitable for battery-powered embedded instrumentation where mixed signal processing and autonomous control are required in one device. Its 60 MIPS core allows active filtering and sensor fusion without a separate digital processor, while the integrated ADC, operational amplifiers, comparators, and CTMU can reduce external component count. The 32 KB Flash stores application firmware and calibration data, and the 4 KB SRAM supports acquisition buffers and state management. Power budgeting should account for analog and digital supply currents at the selected clock and peripheral operating states. Low-power modes, peripheral disable rules, and wake-up sources should be configured explicitly rather than relying only on the nominal processor speed.

🧩

Capacitive Sensing System

The PIC24EP32GP204-E/PT can implement capacitive-touch or timing-based sensing with its CTMU, ADC, comparators, and high-speed processing core. The 60 MIPS rate supports oversampling, baseline tracking, filtering, and user-interface logic, while 32 KB Flash is adequate for calibration tables and gesture or threshold algorithms. The 4 KB RAM provides space for multiple channel baselines and debounce states. Designers should follow the CTMU connection and compensation guidance in the manufacturer data sheet because electrode routing, guard structures, and PCB contamination directly affect measurement stability. Also confirm that the selected analog reference and supply arrangement meet the required timing accuracy before high-volume calibration.

🔧

Programmable Logic Controller

The PIC24EP32GP204-E/PT can serve as the central controller in a small programmable logic or machine-control module. Its 60 MIPS core supports deterministic scanning, communication handling, and event processing, while the integrated ADC and comparators support process inputs and protective thresholds. The high-speed PWM output is useful for proportional control, indicators, or actuator drives, and 32 KB Flash plus 4 KB RAM permits moderate logic capacity without an external processor. The extended -40°C to 125°C temperature range is appropriate for industrial enclosures, subject to overall equipment qualification. Firmware should include watchdog recovery, safe output states during startup, and diagnostic coverage for stuck sensors or communication loss to improve system resilience.

Buod ng mga Inirekomendang Produkto

PIC24EP32GP204 Base device for the PIC24EP32GP204 family Ginagamit sa: Industrial Sensor Controller, Motor and Power Control, Data Acquisition Module, Battery-Powered Embedded System, Capacitive Sensing System, Programmable Logic Controller PIC24EP32GP204-I/PT Microchip Technology Ginagamit sa: Industrial Sensor Controller, Data Acquisition Module, Battery-Powered Embedded System, Programmable Logic Controller PIC24EP32GP204-H/PT Microchip Technology Ginagamit sa: Motor and Power Control, Capacitive Sensing System
What is the operating voltage of PIC24EP32GP204-E/PT?
The PIC24EP32GP204-E/PT operates from a 1.8 V to 3.6 V supply, according to the Microchip PIC24EP32GP204 datasheet. The MCU includes internal regulators for core and digital operation, while the analog subsystem has dedicated supply requirements. Designers should use the datasheet power-supply connection table to distinguish VDDCORE, VDD, and analog supply pins and connect the required decoupling capacitors at each power entry point.
What are the key specifications of PIC24EP32GP204-E/PT?
The PIC24EP32GP204-E/PT combines a 60 MIPS PIC24EP core with 32 KB of Flash, 4 KB of SRAM, and advanced analog peripherals in a 44-pin TQFP package. According to the Microchip product page and manufacturer datasheet, it includes an ADC, operational amplifiers, comparators, CTMU, high-speed PWM, and a Peripheral Trigger Generator. The -E suffix denotes the extended-temperature grade, and /PT denotes the 44-pin package configuration.
Where can I download the PIC24EP32GP204-E/PT datasheet PDF?
The official PIC24EP32GP204-E/PT documentation is available through the Microchip product page at https://www.microchip.com/en-us/product/PIC24EP32GP204. Select the device documentation for the PIC24EP32GP204 family, then choose the data sheet, errata, and programming documentation as needed. The manufacturer data sheet is the authoritative source for the complete 44-pin list, electrical limits, ADC characteristics, and peripheral connections.
Where can I find the PIC24EP32GP204-E/PT pinout?
The PIC24EP32GP204-E/PT pinout is documented in the pin-description tables and package drawings in the Microchip PIC24EP32GP204 data sheet. The device is offered in a 44-pin TQFP measuring 10 x 10 mm. Use the exact /PT package diagram rather than a drawing for another suffix, because pin multiplexing and exposed ground or power assignments can vary between package options.
What can replace PIC24EP32GP204-E/PT?
The closest verified drop-in replacements are PIC24EP32GP204-I/PT and PIC24EP32GP204-H/PT, both from Microchip Technology and both using the 44-pin TQFP configuration. The I grade has a lower 85°C maximum temperature than the E grade, while the H grade extends the upper temperature rating to 150°C. Both preserve the same device family, memory configuration, and package, but firmware and peripheral mapping should still be checked against the exact data sheet.
Is PIC24EP32GP204-E/PT the same as PIC24EP32GP204-I/PT?
PIC24EP32GP204-E/PT and PIC24EP32GP204-I/PT use the same 44-pin TQFP footprint and share the PIC24EP32GP204 device configuration, but their temperature grades differ. The E grade supports operation from -40°C to 125°C, whereas the I grade supports -40°C to 85°C. The I/PT part is therefore a pin-compatible replacement only when the finished equipment does not require operation above 85°C.
What is the best cross-brand equivalent for PIC24EP32GP204-E/PT?
No verified cross-brand drop-in equivalent is established for the PIC24EP32GP204-E/PT. The device combines a specific PIC24EP instruction set, 44-pin assignment, 32 KB Flash, 4 KB SRAM, and proprietary analog peripheral arrangement that must be reconciled before replacement. A different-manufacturer MCU may support similar application functions, but it should not be treated as a drop-in substitute without a complete pin, electrical, clock, and firmware migration review.
PIC24EP32GP204-E/PT vs PIC24EP32GP204-H/PT - which is better?
Choose PIC24EP32GP204-E/PT for equipment operating up to 125°C and PIC24EP32GP204-H/PT for extended operation up to 150°C. Both are 44-pin TQFP devices in the PIC24EP32GP204 family, with 32 KB Flash, 4 KB SRAM, and the same general-purpose analog and timing resources. The H/PT part provides 25°C more upper-temperature headroom, while the E/PT part is the conventional choice where the full 150°C range is unnecessary.
When should I choose PIC24EP32GP204-E/PT over PIC24EP32GP204-I/PT?
Choose PIC24EP32GP204-E/PT when the assembly may operate between 85°C and 125°C and the -I/PT rating would be insufficient. The E/PT and I/PT parts share the 44-pin TQFP package and core family, so the choice is primarily temperature qualification rather than footprint compatibility. For ambient-controlled products that remain below 85°C, the I/PT grade can be evaluated as a lower-temperature-duty option.
Is PIC24EP32GP204-E/PT suitable for industrial control applications?
Yes, the PIC24EP32GP204-E/PT is suitable for industrial control applications requiring operation from -40°C to 125°C. Its 60 MIPS performance, 32 KB Flash, 4 KB SRAM, ADC, comparators, operational amplifiers, CTMU, and high-speed PWM support compact sensing and actuator-control designs. Industrial suitability also depends on the enclosure, power-supply quality, EMC design, and qualification of the complete assembly.
Where can I buy PIC24EP32GP204-E/PT online?
Use the Request a Quote form on this page to request PIC24EP32GP204-E/PT availability, lot traceability, and a quotation for the required quantity. The exact MPN is PIC24EP32GP204-E/PT, including the -E temperature grade and /PT package suffix. Buyers should state the required quantity and authorized-channel preference so the quote can be matched to the correct orderable configuration.
What is the price of PIC24EP32GP204-E/PT?
The current price of PIC24EP32GP204-E/PT is generated through the Request a Quote form on this page. The quote reflects the required quantity, availability, and the exact orderable suffix rather than a generic PIC24EP32GP204 price. Submit the MPN and quantity without changing the -E or /PT suffix, because different temperature grades and package configurations are separate catalog items.
What is the lead time and stock status for PIC24EP32GP204-E/PT?
The current lead time and stock status for PIC24EP32GP204-E/PT should be requested through the Request a Quote form on this page. Provide the exact MPN, target quantity, and required delivery date. The manufacturer product page remains the best lifecycle reference, while a quotation can reflect current channel inventory and scheduled production for the -E/PT orderable configuration.
What is the best drop-in replacement for PIC24EP32GP204-E/PT?
PIC24EP32GP204-H/PT is the closest temperature-capable drop-in replacement because it retains the 44-pin TQFP footprint while supporting operation up to 150°C. PIC24EP32GP204-I/PT is also pin-compatible but is limited to 85°C, so it is suitable only when ambient and enclosure temperatures remain below that level. For either choice, verify programming, peripheral multiplexing, and clock settings in the manufacturer documentation before production substitution.
Can PIC24EP32GP204-H/PT replace PIC24EP32GP204-E/PT?
Yes, PIC24EP32GP204-H/PT can replace PIC24EP32GP204-E/PT when the application is qualified for the H grade’s 150°C maximum operating temperature. Both devices use the 44-pin TQFP package and belong to the same PIC24EP32GP204 configuration. Confirm that the power pins, analog functions, peripheral mappings, and programming configuration are unchanged for the exact package before treating the H/PT device as a production drop-in.

Impormasyon ng Talumpati sa Engineering for PIC24EP32GP204-E/PT — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose PIC24EP32GP204-E/PT for mixed-signal industrial or embedded-control products that require operation from -40°C to 125°C, a 60 MIPS 16-bit core, 32 KB Flash, 4 KB RAM, and integrated ADC, amplifiers, comparators, CTMU, and PWM resources. Select PIC24EP32GP204-H/PT when the assembly must operate up to 150°C and the additional temperature qualification is justified. Choose PIC24EP32GP204-I/PT for equipment that stays below 85°C while retaining the same 44-pin TQFP footprint. A cross-brand MCU should not be treated as a drop-in replacement because the instruction set, analog peripheral arrangement, pin multiplexing, programming ecosystem, and board-level requirements require migration. For any family-grade substitution, review the exact /PT pin table, clock configuration, peripheral assignments, and temperature-dependent limits before production release.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto PIC24EP32GP204-H/PT PIC24EP32GP204-I/PT
Package 44-pin TQFP (10 x 10 mm) 44-pin TQFP (10 x 10 mm) 44-pin TQFP (10 x 10 mm)
Brand Microchip Technology Microchip Technology Microchip Technology
CPU Performance 60 MIPS 60 MIPS 60 MIPS
Program Memory 32 KB Flash 32 KB Flash 32 KB Flash
Data Memory 4 KB RAM 4 KB RAM 4 KB RAM
Maximum Operating Temperature 125°C 150°C 85°C
Minimum Operating Temperature -40°C -40°C -40°C
Integrated Analog Resources Operational amplifiers, comparators, CTMU and ADC Operational amplifiers, comparators, CTMU and ADC Operational amplifiers, comparators, CTMU and ADC
Core Type 16-bit PIC24EP 16-bit PIC24EP 16-bit PIC24EP
Peripheral Trigger Generator Yes Yes Yes

Pangunahing mga Pagkakaiba

  • Higher temperature capability than the industrial I grade (kumpara saPIC24EP32GP204-I/PT)
  • Lower temperature ceiling than the H grade for cost-sensitive industrial designs (kumpara saPIC24EP32GP204-H/PT)
  • Integrated analog and timing resources reduce external circuitry (kumpara saPIC24EP32GP204-I/PT)
  • Same 44-pin footprint allows a practical temperature-grade transition (kumpara saPIC24EP32GP204-H/PT)

Talaan ng Disenyo

Place every supply bypass capacitor directly between its associated power pin and the nearest appropriate ground reference. Keep traces short, use the capacitance and voltage ratings specified by the manufacturer, and avoid routing sensitive analog inputs beneath digital clocks, PWM outputs, or high-current return paths. The 44-pin TQFP footprint should be checked against the exact /PT package drawing before symbol and footprint release.

Use the manufacturer’s recommended analog-ground and digital-ground connection strategy rather than treating every ground pin as interchangeable. Analog inputs to the ADC, comparators, and operational amplifiers should be short, guarded where appropriate, and physically separated from switching and PWM traces. Decoupling layout matters because the CTMU, ADC, and internal amplifiers can be sensitive to supply ripple even when the MCU performs computation correctly.

Do not substitute the /PT device for a QFN package option solely because both provide 44 pins; package outlines, exposed pads, and pin assignments differ. Also verify the temperature-grade requirement before using a lower-grade replacement: PIC24EP32GP204-I/PT is limited to 85°C, whereas the E grade reaches 125°C. Validate clock configuration, peripheral pin multiplexing, programming, and boot behavior after any suffix change.

Separate core, digital, and analog supply requirements when planning the power tree. Check the maximum supply voltage, decoupling requirements, and current limits in the manufacturer data sheet before adding external regulators or test instrumentation. For battery-powered products, measure the complete sleep, active, conversion, and communication states because peripheral configuration can materially change total energy consumption.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The PIC24EP32GP204-E/PT is an industrial-temperature microcontroller rather than an AEC-Q100 automotive-qualified variant. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation or declaration of compliance.

Data napatotohanan sa: 2026-11-16 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

PIC24EP32GP204-E/PT datasheet PIC24EP32GP204-E/PT pinout PIC24EP32GP204-E/PT datasheet pdf PIC24EP32GP204-E/PT specifications PIC24EP32GP204-E/PT equivalent PIC24EP32GP204-E/PT replacement PIC24EP32GP204-E/PT price PIC24EP32GP204-E/PT stock PIC24EP32GP204 44-pin TQFP pinout PIC24EP32GP204 vs PIC24EP32GP204-I/PT PIC24EP32GP204 application circuit Microchip PIC24EP32GP204-E/PT

Mga kaugnay na Mga Komponente at mga Tuntunin

Microchip Technology PIC24EP32GP204-E/PT PIC24EP32GP204 PIC24EP32GP204-H/PT PIC24EP32GP204-I/PT PIC24EP 16-bit microcontroller general-purpose microcontroller embedded processor semiconductor 60 MIPS 32 KB Flash 4 KB SRAM ADC CTMU operational amplifier comparator Peripheral Trigger Generator high-speed PWM 44-pin TQFP TQFP package family surface-mount package industrial control motor control data acquisition
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ