Microchip Technology

PIC24EP64MC202-E/SP - 60MHz Motor Control MCU | Microchip

Teilenummer: PIC24EP64MC202-E/SP ✓ Aktiv
3.0 V to 3.6 V Vdss 28-pin SPDIP, 7.62 mm row spacing Package 60 MHz Speed 64 KB Memory
MOQ: 1 |

PIC24EP64MC202-E/SP Übersicht

The Microchip Technology PIC24EP64MC202-E/SP is a 16-bit PIC24E motor-control microcontroller rated at 60 MIPS, with 64 KB of Flash memory, 8 KB of SRAM, and a 28-pin SPDIP package. It operates from 3.0 V to 3.6 V across an extended temperature range of -40°C to 125°C, combining a high-speed CPU with motor-control and mixed-signal peripherals for precision electronic systems.

A microcontroller is a programmable integrated circuit containing a processor core, memory, and dedicated peripherals. Within the embedded-control hierarchy, this device belongs to the 16-bit MCU class and is optimized for motor control. Its integrated power-management PWM, quadrature encoder interface, comparators, operational amplifiers, and programmable Schmitt-trigger inputs reduce the need for separate analog and timing components while improving control-loop integration.

Key resources include 64 KB of program Flash, 8 KB of SRAM, a 16-bit architecture, and a maximum operating frequency of 60 MHz. The analog and timing resources include a 10-bit or 12-bit ADC, three operational amplifiers, four comparators, high-speed PWM, QEI, and PTG blocks. These resources support closed-loop motor positioning, current sensing, speed control, and power conversion in industrial, appliance, and embedded systems.

The PIC24E architecture combines a 16-bit RISC-style processor core with high-resolution peripheral timing. The motor-control PWM and QEI interfaces can receive position and speed feedback from encoders, while the ADC and comparator network can monitor current or voltage. The PTG peripheral extends event-based timing and programmable stimulus capabilities beyond conventional timer functions, supporting deterministic control sequences.

Typical uses include brushless DC motor controllers, stepper-motor drives, servo amplifiers, compact power converters, and industrial automation modules. The -E/SP temperature designation supports extended industrial environments, while the through-hole 28-pin SPDIP package simplifies prototyping, inspection, and manual assembly.

Designers should allocate decoupling close to each supply pin, provide a stable oscillator and programming interface, and verify the pin-specific peripheral multiplexing before routing PCB traces. Because the MCU integrates analog functions with digital control, grounding, analog-reference layout, and isolation between power-return paths require careful attention to preserve control accuracy.

This page combines the device specifications, application guidance, package details, and replacement analysis into a design-focused reference for engineers evaluating the PIC24EP64MC202-E/SP. It also identifies where direct pin-compatible substitution is limited, helping procurement teams distinguish valid drop-in choices from parts that require different packages, memory capacities, peripherals, or firmware adaptation.

Drop-in-Alternativen für PIC24EP64MC202-E/SP – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit PIC24EP64MC202-E/SP (gleiche Bauform und Footprint) – abweichend in Package, RoHS Status.

Microchip Technology
Package: 28-pin SPDIP (0.300 inch)
RoHS Status: Compliant (ROHS3)

PIC24EP64MC202-I/SP

✅ Drop-In
📦 28-pin SPDIP
Same 28-pin SPDIP footprint and base device resources, but the -I temperature grade differs from the -E grade; verify the guaranteed ambient-temperature limits before substitution.

📋 Referenzalternative (nicht im Katalog)

PIC24EP64MC202-E/SP Grenzwerte & elektrische Eigenschaften

Product Type 16-bit motor-control microcontroller
Maximum CPU Frequency 60 MHz
Instruction Performance 60 MIPS
Family Advertised Performance 70 MIPS
Processor Architecture 16-bit PIC24E RISC
Flash Memory 64 KB
SRAM 8 KB
Supply Voltage Range 3.0 V to 3.6 V
Betriebstemperaturbereich -40°C to +125°C
ADC Resolution 10-bit or 12-bit
ADC Channel Count 6 channels
Operational Amplifier Count 3
Comparator Count 4
Motor-Control Peripherals MCPWM and QEI
Programmable Timing Peripheral PTG
General-Purpose I/O 21 I/O
Gehäuse 28-pin SPDIP, 7.62 mm row spacing
Montageart Through-hole
Shipping Method Tube
Lebenszyklusstatus Active
RoHS-Status Unknown
REACH Status Unknown
AEC-Q100 Qualification Not applicable

PIC24EP64MC202-E/SP 28-pin spdip, 7.62 mm row spacing Pinbelegungsleitfaden

Pinbelegung für PIC24EP64MC202-E/SP (28-pin spdip, 7.62 mm row spacing-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für PIC24EP64MC202-E/SP im 28-pin spdip, 7.62 mm row spacing-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für PIC24EP64MC202-E/SP.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

PIC24EP64MC202-E/SP ist geeignet für 6 Anwendungs: Brushless DC Motor Controllers, Stepper-Motor Position Control, Servo and Robotics Drives, Industrial Sensor Conditioning, Compact Power-Converter Control, Battery-Powered Portable Equipment.

🏭

Brushless DC Motor Controllers

PIC24EP64MC202-E/SP fits brushless DC motor control because its 60 MHz 16-bit core can execute commutation and speed-control algorithms while MCPWM generates the required switching waveforms. The 10-bit or 12-bit ADC can sample phase current or bus voltage, and the three integrated op amps can support current-sense conditioning. Its 64 KB Flash and 8 KB SRAM provide space for control code and working variables, while the 28-pin SPDIP package simplifies through-hole prototypes and repairable industrial assemblies.

⚙️

Stepper-Motor Position Control

PIC24EP64MC202-E/SP supports closed-loop stepper-motor positioning where accurate step sequencing and rotor feedback are required. MCPWM provides synchronized pulse generation, while QEI can acquire incremental encoder position and direction for position-error correction. The 60 MIPS processing capability leaves room for motion-profile calculation and supervisory logic. Its integrated comparators and op amps can assist with limit, current, or sensor-interface conditioning, reducing external circuitry in compact position-control modules.

🤖

Servo and Robotics Drives

PIC24EP64MC202-E/SP is suitable for servo amplifiers and robotic actuators that combine digital command processing with analog feedback conditioning. Its three op amps and four comparators can support current sensing, signal conditioning, and protection functions near the power stage, while the ADC provides a 10-bit or 12-bit conversion option. The QEI and MCPWM resources support encoder-driven positioning and precise actuator timing in a single 28-pin SPDIP control package.

🏭

Industrial Sensor Conditioning

PIC24EP64MC202-E/SP can serve as the control and measurement hub in industrial sensor modules because it combines an ADC, operational amplifiers, comparators, and programmable timing in one device. The analog resources can process inputs from bridge, current, or position sensors, while PTG and high-speed timers coordinate acquisition and control events. The -E/SP variant is specified across -40°C to +125°C, making it suitable for thermally demanding equipment when final heat-rise requirements remain within the device rating.

⚡

Compact Power-Converter Control

PIC24EP64MC202-E/SP is appropriate for supervisory and supervisory-control roles in compact power converters because MCPWM can coordinate switching events and the ADC can monitor operating voltages or currents. Its 64 KB Flash accommodates control algorithms and fault handling, and the 8 KB SRAM can hold conversion and regulation variables. Programmable timing through PTG supports deterministic event sequencing, while integrated analog blocks reduce the component count required around the controller.

🔋

Battery-Powered Portable Equipment

PIC24EP64MC202-E/SP can support portable equipment where motor control, analog measurement, and embedded logic must coexist in a limited component count. The integrated ADC, op amps, comparators, timers, and motor-control peripherals reduce board area, while the 28-pin SPDIP package remains practical for leaded assemblies. Its 3.0 V to 3.6 V operating range suits a regulated 3.3 V rail, although final battery life depends on regulator efficiency, standby behavior, motor drive losses, and the selected firmware workload.

Zusammenfassung der empfohlenen Produkte

PIC24EP64MC202-I/SP Temperature-graded family variant Verwendet in: Brushless DC Motor Controllers, Stepper-Motor Position Control, Servo and Robotics Drives, Industrial Sensor Conditioning, Compact Power-Converter Control, Battery-Powered Portable Equipment PIC24EP64MC202 Base device identifier Verwendet in: Brushless DC Motor Controllers, Stepper-Motor Position Control, Servo and Robotics Drives, Industrial Sensor Conditioning, Compact Power-Converter Control, Battery-Powered Portable Equipment
What are the key specifications of PIC24EP64MC202-E/SP that engineers should know?
The PIC24EP64MC202-E/SP is a 16-bit PIC24E motor-control MCU operating up to 60 MHz with 64 KB of Flash, 8 KB of SRAM, and a 28-pin SPDIP package. According to the Microchip product page, the PIC24E motor-control family provides enhanced on-chip peripherals for precision, energy-efficient motor systems, while distributor specifications identify MCPWM, QEI, three op amps, four comparators, and PTG capabilities.
What is the operating voltage range of PIC24EP64MC202-E/SP?
The PIC24EP64MC202-E/SP operates from 3.0 V to 3.6 V. This supply range is suitable for regulated 3.3 V embedded-control systems and allows the MCU, ADC, comparators, operational amplifiers, and motor-control peripherals to operate from a common rail. Confirm individual peripheral operating conditions against the manufacturer datasheet before finalizing rail tolerance and decoupling requirements.
Where can I download the PIC24EP64MC202-E/SP datasheet PDF?
The PIC24EP64MC202-E/SP datasheet is available through the official Microchip PIC24EP64MC202 product page at https://www.microchip.com/en-us/product/PIC24EP64MC202. From that page, open the documentation section to locate the manufacturer PDF, device pinout, programming guidance, and errata documents appropriate for the installed revision.
Where can I find the PIC24EP64MC202-E/SP pinout?
The authoritative pinout is the pin-description table in the Microchip PIC24EP64MC202 datasheet. The target device is supplied in a 28-pin SPDIP package and includes multiplexed motor-control, ADC, comparator, op-amp, programming, and digital I/O functions. Use the package drawing and pin table together when assigning signals because several peripheral functions may share pins.
Is PIC24EP64MC202-E/SP suitable for brushless DC motor control?
Yes, PIC24EP64MC202-E/SP is suitable for brushless DC motor control because it combines a 60 MHz 16-bit processor with MCPWM, QEI, a 10-bit or 12-bit ADC, three op amps, and four comparators. The ADC and analog front end can support current and voltage feedback, while QEI supplies rotor-position information for deterministic commutation and speed regulation.
How much memory does PIC24EP64MC202-E/SP provide?
PIC24EP64MC202-E/SP provides 64 KB of Flash program memory and 8 KB of SRAM. The 64 KB Flash supports a substantial application program and configuration data, while 8 KB of SRAM accommodates control variables and buffers. Firmware designers should budget memory for the motor-control library, parameter storage, diagnostics, and application-specific logic before relying on the full nominal capacity.
What is the difference between PIC24EP64MC202-E/SP and PIC24EP64MC202-I/SP?
Both devices use the same 28-pin SPDIP format and belong to the same PIC24EP64MC202 family, but their temperature designations differ. PIC24EP64MC202-E/SP is specified from -40°C to +125°C, while PIC24EP64MC202-I/SP is identified as the industrial-temperature variant. The I/SP designation may change the guaranteed temperature range, so qualification for the intended ambient condition is essential.
What can replace PIC24EP64MC202-E/SP as a drop-in replacement?
PIC24EP64MC202-I/SP is the closest identified same-package replacement candidate, using the 28-pin SPDIP format and the same 64 KB Flash, 8 KB SRAM, 60 MHz-class controller, MCPWM, QEI, analog, and timing resources. Its temperature grade differs, so it is a valid substitution only when that grade satisfies the design requirements. A cross-brand MCU generally also requires peripheral, interrupt, toolchain, and firmware verification.
Is PIC24EP64MC202-E/SP the same as PIC24EP64MC202-E/SO?
No, PIC24EP64MC202-E/SP and PIC24EP64MC202-E/SO share the base device and -E temperature grade, but they use different packages. The E/SP version is a 28-pin SPDIP, while E/SO is a 28-pin SOIC. Their board footprints, pin positions, assembly processes, and layouts are not interchangeable, so E/SO is not a pin-to-pin drop-in replacement for E/SP.
When should I choose PIC24EP64MC202-E/SP over a cross-brand MCU?
Choose PIC24EP64MC202-E/SP when the design benefits from an established PIC24E software ecosystem and its integrated MCPWM, QEI, three op amps, four comparators, ADC, and PTG peripherals. A cross-brand MCU should be selected only after confirming equivalent resources, pin behavior, voltage limits, interrupt architecture, motor-control libraries, timing accuracy, and toolchain support; nominal processor speed alone does not establish drop-in compatibility.
How do I compare PIC24EP64MC202-E/SP with another 60 MHz motor-control MCU?
Compare the PIC24EP64MC202-E/SP with another motor-control MCU using peripheral capability, memory, package pinout, ADC performance, PWM resolution and channels, encoder interface, analog functions, temperature grade, interrupt latency, and software-tool support. The PIC24EP64MC202-E/SP provides 64 KB Flash, 8 KB SRAM, 60 MIPS, MCPWM, QEI, three op amps, four comparators, and PTG resources.
What are the power and thermal considerations for PIC24EP64MC202-E/SP?
Design the 3.0 V to 3.6 V supply to support the MCU and all enabled analog peripherals while allowing for startup and motor-transient margin. Place bypass capacitors close to the supply pins and keep high-current PWM returns separate from sensitive analog returns. The device is rated to +125°C, but total junction temperature depends on ambient temperature, dissipation, package construction, and board heat spreading.
Where can I buy PIC24EP64MC202-E/SP and check current availability?
Use the Request a Quote form on this page to request current pricing, stock, minimum order quantity, and lead time for PIC24EP64MC202-E/SP. The target is an active, standard catalog microcontroller supplied in a 28-pin SPDIP tube, but current commercial conditions can change. A written quotation provides the appropriate basis for a production release and scheduled purchasing.
What is the price of PIC24EP64MC202-E/SP?
Current commercial pricing for PIC24EP64MC202-E/SP is obtained through the Request a Quote form on this page. The form is the appropriate route for unit pricing, volume tiers, stock allocation, and lead-time confirmation. Quote requests can also include the required 28-pin SPDIP package, quantity, production schedule, and any assembly or traceability requirements.
Is PIC24EP64MC202-E/SP in stock and what is its lead time?
Current stock and lead time for PIC24EP64MC202-E/SP should be confirmed through the Request a Quote form on this page. The device is an active 28-pin SPDIP microcontroller, but inventory and production scheduling can vary by order quantity and date. Request a dated quotation and allocation confirmation before committing the BOM or approving a build.

Technische Referenzdaten für PIC24EP64MC202-E/SP – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose PIC24EP64MC202-E/SP for compact motor-control, positioning, and mixed-signal control systems that require a 16-bit 60 MHz MCU, 64 KB Flash, 8 KB SRAM, MCPWM, QEI, ADC, three op amps, four comparators, and PTG in a 28-pin SPDIP package. Select PIC24EP64MC202-I/SP when the same electrical and package resources are needed but the -I temperature grade better matches the qualification requirements. Do not select PIC24EP64MC202-E/SO as a board-level replacement because its SOIC footprint requires a different PCB layout. A cross-brand MCU may be justified for cost, sourcing, or product-cycle reasons, but it should be treated as a redesign unless Microchip documents pin compatibility. For every candidate, verify memory capacity, peripheral mapping, PWM behavior, encoder interface, analog performance, programming support, and firmware requirements before release.

Vergleich mit Alternativen

Parameter Dieses Produkt PIC24EP64MC202-I/SP
Brand Microchip Technology Microchip Technology
Package 28-pin SPDIP 28-pin SPDIP
CPU Frequency 60 MHz 60 MHz
Instruction Throughput 60 MIPS 60 MIPS
Flash Memory 64 KB 64 KB
SRAM 8 KB 8 KB
Supply Voltage 3.0 V to 3.6 V 3.0 V to 3.6 V
Temperature Designation -E -I
Motor-Control Peripherals MCPWM and QEI MCPWM and QEI
Analog Resources 10-bit or 12-bit ADC, 3 op amps, 4 comparators 10-bit or 12-bit ADC, 3 op amps, 4 comparators
Programmable Timing PTG PTG

Wichtigste Unterscheidungsmerkmale

  • Integrated motor-control and analog resources reduce external circuitry (vs. PIC24EP64MC202-I/SP)
  • Extended-temperature designation fits harsh industrial environments (vs. PIC24EP64MC202-I/SP)
  • Through-hole package supports inspectable and repairable assemblies (vs. PIC24EP64MC202-E/SO)

Designhinweise

Use a regulated 3.0 V to 3.6 V supply and place the required bypass capacitors close to the device supply pins. Route motor-stage current and PWM return currents so that their voltage drops are not injected into the MCU or analog-ground paths. Check the absolute maximum and recommended operating limits in the manufacturer datasheet before adding external overvoltage protection or adjusting startup sequencing.

Assign every package pin from the datasheet pin-description table before laying out the PCB because the 28-pin SPDIP footprint combines digital I/O with multiplexed ADC, comparator, op-amp, timer, programming, and clock functions. Keep programming and debug access unobstructed, maintain short oscillator traces, and separate analog inputs from PWM and motor-drive routing to reduce switching noise coupled into measurement channels.

Do not treat any MCU with the same clock frequency as a drop-in substitute. Verify flash size, SRAM, peripheral channels, interrupt mappings, pin multiplexing, programming protocol, and PWM/QEI behavior. PIC24EP64MC202-I/SP retains the 28-pin SPDIP format and base resources, but its temperature-grade requirements must be checked before it replaces PIC24EP64MC202-E/SP in an existing design.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact MPN. AEC-Q100 status is treated as not applicable because this is an industrial microcontroller rather than an automotive-qualified device.

Daten verifiziert am: 2026-11-20 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

PIC24EP64MC202-E/SP datasheet PIC24EP64MC202-E/SP pinout PIC24EP64MC202-E/SP specifications PIC24EP64MC202-E/SP replacement PIC24EP64MC202-E/SP equivalent PIC24EP64MC202-E/SP vs PIC24EP64MC202-I/SP PIC24EP64MC202 60MHz motor control MCU PIC24EP64MC202 28-pin SPDIP PIC24EP64MC202 MCPWM QEI PTG PIC24EP64MC202 brushless DC motor control PIC24EP64MC202-E/SP price PIC24EP64MC202-E/SP stock Microchip PIC24EP64MC202-E/SP

Verwandte Bauteile & Begriffe

Microchip Technology PIC24EP64MC202-E/SP PIC24EP64MC202 PIC24EP64MC202-I/SP PIC24EP64MC202-E/SO PIC24E 16-bit microcontroller motor-control MCU embedded processor semiconductor MCPWM QEI PTG quadrature encoder interface programmable timing peripheral operational amplifier comparator analog-to-digital converter ADC Pulse-width modulation 28-pin SPDIP through-hole package Flash memory SRAM 3.3 V embedded control
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen