PIC24EP64MC202-E/SP - 60MHz Motor Control MCU | Microchip
MPN: PIC24EP64MC202-E/SP ✓ 啟用中PIC24EP64MC202-E/SP 概覽
A microcontroller is a programmable integrated circuit containing a processor core, memory, and dedicated peripherals. Within the embedded-control hierarchy, this device belongs to the 16-bit MCU class and is optimized for motor control. Its integrated power-management PWM, quadrature encoder interface, comparators, operational amplifiers, and programmable Schmitt-trigger inputs reduce the need for separate analog and timing components while improving control-loop integration.
Key resources include 64 KB of program Flash, 8 KB of SRAM, a 16-bit architecture, and a maximum operating frequency of 60 MHz. The analog and timing resources include a 10-bit or 12-bit ADC, three operational amplifiers, four comparators, high-speed PWM, QEI, and PTG blocks. These resources support closed-loop motor positioning, current sensing, speed control, and power conversion in industrial, appliance, and embedded systems.
The PIC24E architecture combines a 16-bit RISC-style processor core with high-resolution peripheral timing. The motor-control PWM and QEI interfaces can receive position and speed feedback from encoders, while the ADC and comparator network can monitor current or voltage. The PTG peripheral extends event-based timing and programmable stimulus capabilities beyond conventional timer functions, supporting deterministic control sequences.
Typical uses include brushless DC motor controllers, stepper-motor drives, servo amplifiers, compact power converters, and industrial automation modules. The -E/SP temperature designation supports extended industrial environments, while the through-hole 28-pin SPDIP package simplifies prototyping, inspection, and manual assembly.
Designers should allocate decoupling close to each supply pin, provide a stable oscillator and programming interface, and verify the pin-specific peripheral multiplexing before routing PCB traces. Because the MCU integrates analog functions with digital control, grounding, analog-reference layout, and isolation between power-return paths require careful attention to preserve control accuracy.
This page combines the device specifications, application guidance, package details, and replacement analysis into a design-focused reference for engineers evaluating the PIC24EP64MC202-E/SP. It also identifies where direct pin-compatible substitution is limited, helping procurement teams distinguish valid drop-in choices from parts that require different packages, memory capacities, peripherals, or firmware adaptation.
直接替換替代品,適用於 PIC24EP64MC202-E/SP — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: PIC24EP64MC202-E/SP (相同外形與佔位) — 差異在於 Package, RoHS Status.
PIC24EP64MC202-I/SP
✅ 直接替換📋 參考替代品(不在目錄中)
PIC24EP64MC202-E/SP 最大額定值與電氣特性
| Product Type | 16-bit motor-control microcontroller |
| Maximum CPU Frequency | 60 MHz |
| Instruction Performance | 60 MIPS |
| Family Advertised Performance | 70 MIPS |
| Processor Architecture | 16-bit PIC24E RISC |
| Flash Memory | 64 KB |
| SRAM | 8 KB |
| Supply Voltage Range | 3.0 V to 3.6 V |
| 工作溫度範圍 | -40°C to +125°C |
| ADC Resolution | 10-bit or 12-bit |
| ADC Channel Count | 6 channels |
| Operational Amplifier Count | 3 |
| Comparator Count | 4 |
| Motor-Control Peripherals | MCPWM and QEI |
| Programmable Timing Peripheral | PTG |
| General-Purpose I/O | 21 I/O |
| 封裝 | 28-pin SPDIP, 7.62 mm row spacing |
| 安裝類型 | Through-hole |
| Shipping Method | Tube |
| 生命週期狀態 | Active |
| RoHS 狀態 | Unknown |
| REACH Status | Unknown |
| AEC-Q100 Qualification | Not applicable |
PIC24EP64MC202-E/SP 28-pin spdip, 7.62 mm row spacing 腳位配置指南
PIC24EP64MC202-E/SP(28-pin spdip, 7.62 mm row spacing 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: PIC24EP64MC202-E/SP.
請參閱 資料表 以查看完整腳位配置。
典型應用
PIC24EP64MC202-E/SP 適用於 6 應用s: Brushless DC Motor Controllers, Stepper-Motor Position Control, Servo and Robotics Drives, Industrial Sensor Conditioning, Compact Power-Converter Control, Battery-Powered Portable Equipment.
Brushless DC Motor Controllers
PIC24EP64MC202-E/SP fits brushless DC motor control because its 60 MHz 16-bit core can execute commutation and speed-control algorithms while MCPWM generates the required switching waveforms. The 10-bit or 12-bit ADC can sample phase current or bus voltage, and the three integrated op amps can support current-sense conditioning. Its 64 KB Flash and 8 KB SRAM provide space for control code and working variables, while the 28-pin SPDIP package simplifies through-hole prototypes and repairable industrial assemblies.
推薦
Stepper-Motor Position Control
PIC24EP64MC202-E/SP supports closed-loop stepper-motor positioning where accurate step sequencing and rotor feedback are required. MCPWM provides synchronized pulse generation, while QEI can acquire incremental encoder position and direction for position-error correction. The 60 MIPS processing capability leaves room for motion-profile calculation and supervisory logic. Its integrated comparators and op amps can assist with limit, current, or sensor-interface conditioning, reducing external circuitry in compact position-control modules.
推薦
Servo and Robotics Drives
PIC24EP64MC202-E/SP is suitable for servo amplifiers and robotic actuators that combine digital command processing with analog feedback conditioning. Its three op amps and four comparators can support current sensing, signal conditioning, and protection functions near the power stage, while the ADC provides a 10-bit or 12-bit conversion option. The QEI and MCPWM resources support encoder-driven positioning and precise actuator timing in a single 28-pin SPDIP control package.
推薦
Industrial Sensor Conditioning
PIC24EP64MC202-E/SP can serve as the control and measurement hub in industrial sensor modules because it combines an ADC, operational amplifiers, comparators, and programmable timing in one device. The analog resources can process inputs from bridge, current, or position sensors, while PTG and high-speed timers coordinate acquisition and control events. The -E/SP variant is specified across -40°C to +125°C, making it suitable for thermally demanding equipment when final heat-rise requirements remain within the device rating.
推薦
Compact Power-Converter Control
PIC24EP64MC202-E/SP is appropriate for supervisory and supervisory-control roles in compact power converters because MCPWM can coordinate switching events and the ADC can monitor operating voltages or currents. Its 64 KB Flash accommodates control algorithms and fault handling, and the 8 KB SRAM can hold conversion and regulation variables. Programmable timing through PTG supports deterministic event sequencing, while integrated analog blocks reduce the component count required around the controller.
推薦
Battery-Powered Portable Equipment
PIC24EP64MC202-E/SP can support portable equipment where motor control, analog measurement, and embedded logic must coexist in a limited component count. The integrated ADC, op amps, comparators, timers, and motor-control peripherals reduce board area, while the 28-pin SPDIP package remains practical for leaded assemblies. Its 3.0 V to 3.6 V operating range suits a regulated 3.3 V rail, although final battery life depends on regulator efficiency, standby behavior, motor drive losses, and the selected firmware workload.
推薦
推薦產品摘要
工程參考資料,適用於 PIC24EP64MC202-E/SP — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | PIC24EP64MC202-I/SP |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 28-pin SPDIP | 28-pin SPDIP |
| CPU Frequency | 60 MHz | 60 MHz |
| Instruction Throughput | 60 MIPS | 60 MIPS |
| Flash Memory | 64 KB | 64 KB |
| SRAM | 8 KB | 8 KB |
| Supply Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| Temperature Designation | -E | -I |
| Motor-Control Peripherals | MCPWM and QEI | MCPWM and QEI |
| Analog Resources | 10-bit or 12-bit ADC, 3 op amps, 4 comparators | 10-bit or 12-bit ADC, 3 op amps, 4 comparators |
| Programmable Timing | PTG | PTG |
主要差異化特點
- Integrated motor-control and analog resources reduce external circuitry (對比PIC24EP64MC202-I/SP)
- Extended-temperature designation fits harsh industrial environments (對比PIC24EP64MC202-I/SP)
- Through-hole package supports inspectable and repairable assemblies (對比PIC24EP64MC202-E/SO)
設計說明
Use a regulated 3.0 V to 3.6 V supply and place the required bypass capacitors close to the device supply pins. Route motor-stage current and PWM return currents so that their voltage drops are not injected into the MCU or analog-ground paths. Check the absolute maximum and recommended operating limits in the manufacturer datasheet before adding external overvoltage protection or adjusting startup sequencing.
Assign every package pin from the datasheet pin-description table before laying out the PCB because the 28-pin SPDIP footprint combines digital I/O with multiplexed ADC, comparator, op-amp, timer, programming, and clock functions. Keep programming and debug access unobstructed, maintain short oscillator traces, and separate analog inputs from PWM and motor-drive routing to reduce switching noise coupled into measurement channels.
Do not treat any MCU with the same clock frequency as a drop-in substitute. Verify flash size, SRAM, peripheral channels, interrupt mappings, pin multiplexing, programming protocol, and PWM/QEI behavior. PIC24EP64MC202-I/SP retains the 28-pin SPDIP format and base resources, but its temperature-grade requirements must be checked before it replaces PIC24EP64MC202-E/SP in an existing design.
合規資訊
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact MPN. AEC-Q100 status is treated as not applicable because this is an industrial microcontroller rather than an automotive-qualified device.