PIC24F16KA302T-I/SS - 32MHz XLP MCU | Microchip
Teilenummer: PIC24F16KA302T-I/SS ✓ AktivPIC24F16KA302T-I/SS Übersicht
A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. The PIC24F16KA302 belongs to the 16-bit embedded-control hierarchy: microcontroller, embedded processor, and semiconductor. XLP, or eXtreme Low Power, technology extends that hierarchy into low-power integrated circuits intended for systems that spend substantial time sleeping between measurements or control events.
Key features include 16 MIPS execution performance, 2 KB of data RAM, 512 bytes of data EEPROM, a 12-bit ADC, and CTMU support. The 16 KB Flash memory provides room for application firmware, while EEPROM preserves small amounts of calibration or configuration data across power cycles. The ADC and CTMU make the device useful for analog measurement, capacitive sensing, and mixed-signal control designs.
The device combines a 16-bit RISC architecture with power-management peripherals that remain active in Deep Sleep mode. DSBOR supports brown-out detection, DSWDT provides a watchdog function during low-power operation, and RTCC supports real-time clock functions without requiring continuous high-frequency CPU activity. This architecture favors duty-cycled measurement and control systems in which average energy use matters more than continuous processing throughput.
Typical applications include battery-powered sensor nodes, industrial condition-monitoring devices, compact instrument panels, low-power data loggers, and wearable or portable products. Its 28-pin SSOP package also makes it practical for designs requiring a moderate number of I/O connections without moving to a larger surface-mount package.
PCB design should preserve access to programming, reset, power, and decoupling pins while following the package land pattern and pin definitions in the manufacturer datasheet. Select external crystal or timing components only where the required oscillator configuration calls for them, and size bypass capacitors according to the device power and operating recommendations.
This product page combines the core device specifications, verified package and memory details, same-footprint replacement options, and application guidance. It is designed to help engineers evaluate the PIC24F16KA302T-I/SS for low-power embedded systems without changing the PCB footprint.
Drop-in-Alternativen für PIC24F16KA302T-I/SS – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PIC24F16KA302T-I/SS (gleiche Bauform und Footprint).
PIC24F16KA302T-E/SS
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
PIC24F16KA302T-I/SS Grenzwerte & elektrische Eigenschaften
| CPU Architecture | 16-bit RISC |
| Maximum CPU Frequency | 32 MHz |
| Instruction Performance | 16 MIPS |
| Program Memory | 16 KB Flash |
| Program Memory Organization | 5.5K x 24 words |
| Data RAM | 2 KB |
| Data EEPROM | 512 bytes |
| ADC Resolution | 12 bits |
| Versorgungsspannung | 3.3 V |
| Low-Power Technology | PIC XLP, including Deep Sleep operation |
| Deep-Sleep Peripheral | DSBOR |
| Deep-Sleep Watchdog | DSWDT |
| Real-Time Clock | RTCC |
| Analog Peripheral | CTMU |
| Gehäuse | 28-pin SSOP |
| Package Width | 5.30 mm |
| Package Body Width | 0.209 inch |
| Montageart | Surface mount |
| Temperature Grade | Industrial grade |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
PIC24F16KA302T-I/SS 0.209 inch Pinbelegungsleitfaden
Pinbelegung für PIC24F16KA302T-I/SS (0.209 inch-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für PIC24F16KA302T-I/SS.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
PIC24F16KA302T-I/SS ist geeignet für 6 Anwendungs: Battery-Powered Sensor Node, Industrial Condition Monitoring, Portable Medical Monitor, Capacitive Touch Interface, Low-Power Data Logger, Wearable Health Device.
Battery-Powered Sensor Node
The PIC24F16KA302T-I/SS fits battery-powered sensor nodes because its 32 MHz 16-bit core provides useful processing performance while XLP mode supports Deep Sleep operation. The device retains DSBOR, DSWDT, and RTCC functions during low-power states, allowing a node to supervise the supply and time events without continuous CPU activity. Its 16 KB Flash stores compact acquisition and filtering firmware, while 2 KB of RAM supports working buffers. The 12-bit ADC handles sensor outputs and CTMU supports capacitive probes. Duty-cycle the measurement sequence around the sensor's settling time to reduce average power consumption.
Empfohlen
Industrial Condition Monitoring
The PIC24F16KA302T-I/SS is appropriate for industrial condition-monitoring equipment that combines local sensing with long idle intervals. Its 12-bit ADC can acquire process or vibration-sensor signals, while the 16-bit CPU performs scaling, filtering, threshold evaluation, and event handling. DSBOR and DSWDT improve robustness by retaining supply and watchdog functions during Deep Sleep, and RTCC provides timekeeping for timestamped records. The 28-pin SSOP package offers enough connections for a sensor interface, communications interface, and local indicators while remaining compact for distributed equipment. Apply signal conditioning and protection appropriate to the monitored source before connecting it to the ADC.
Empfohlen
Portable Medical Monitor
The PIC24F16KA302T-I/SS can serve as the controller in a portable medical-monitoring product that combines a small display, sensor input, and battery-powered operation. The 32 MHz processor executes acquisition, filtering, and user-interface updates, while the 12-bit ADC handles suitable analog measurement channels. XLP Deep Sleep operation is valuable between samples, and the RTCC permits event and timestamp management. The 2 KB RAM and 16 KB Flash are sufficient for compact embedded firmware rather than a high-complexity user interface. Designers must add the required medical, electrical-safety, and electromagnetic-compatibility validation for the finished product; the device status alone does not establish compliance.
Empfohlen
Capacitive Touch Interface
The PIC24F16KA302T-I/SS supports capacitive touch interfaces through its CTMU peripheral and 12-bit ADC. The CTMU can time charge and discharge events associated with external capacitive sensors, allowing firmware to estimate capacitance and detect touches or proximity. Its 32 MHz core can scan multiple electrodes, apply baseline compensation, and update a display or communications interface. Because sensor performance depends on electrode geometry, guarding, leakage, and environmental conditions, calibrate each channel and define filtering rather than treating every capacitance change as a valid touch. The 28-pin SSOP package also leaves pins available for a human interface and communication circuitry.
Empfohlen
Low-Power Data Logger
The PIC24F16KA302T-I/SS is well suited to a low-power data logger that records periodic environmental or process measurements. The 16 KB Flash stores firmware and may support buffered records, 2 KB of RAM provides working storage, and 512 bytes of EEPROM preserves configuration values. DSBOR and DSWDT remain useful while the logger is idle, and RTCC can establish record timing without keeping the CPU continuously active. Its 12-bit ADC supports common analog sensors through suitable scaling and conditioning. Optimize energy use by controlling the sensor power, sampling frequency, and communications schedule, then confirm write endurance against the expected logging rate and retention requirements.
Empfohlen
Wearable Health Device
The PIC24F16KA302T-I/SS can control a compact wearable health device where battery life and component size are primary constraints. Its XLP Deep Sleep architecture allows the processor to sleep between sensor samples while DSWDT, DSBOR, and RTCC continue low-power functions. The 12-bit ADC and CTMU support suitable analog and capacitive measurements, and the 16-bit core can perform baseline correction and filtering before storing results. The SSOP-28 package is useful for compact assemblies, although the final enclosure and body-contact design determine practical wearable suitability. Validate sensor accuracy, skin-contact safety, radio coexistence, and applicable product requirements as part of the complete system design.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PIC24F16KA302T-I/SS – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PIC24F16KA302T-E/SS |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 28-pin SSOP | 28-pin SSOP |
| CPU Architecture | 16-bit RISC | 16-bit RISC |
| Maximum CPU Frequency | 32 MHz | 32 MHz |
| Instruction Performance | 16 MIPS | 16 MIPS |
| Program Memory | 16 KB Flash | 16 KB Flash |
| Data RAM | 2 KB | 2 KB |
| Data EEPROM | 512 bytes | 512 bytes |
| ADC Resolution | 12 bits | 12 bits |
| Low-Power Features | XLP, DSBOR, DSWDT, RTCC, Deep Sleep | XLP, DSBOR, DSWDT, RTCC, Deep Sleep |
| Temperature Grade | Industrial grade | Extended-temperature grade |
| Analog Peripheral | CTMU | CTMU |
Wichtigste Unterscheidungsmerkmale
- Maintains the same core performance in a drop-in SSOP-28 format (vs. PIC24F16KA302T-E/SS)
- Combines XLP low-power control with real-time and supervision functions (vs. PIC24F16KA302T-E/SS)
- Combines mixed-signal measurement with compact embedded control (vs. PIC24F16KA302T-E/SS)
Designhinweise
Use the XLP low-power architecture deliberately: place the PIC24F16KA302T-I/SS into Deep Sleep during long idle periods, retain only the peripherals required by the application, and wake it through the intended interrupt source. Disable unused peripherals to reduce leakage. Because the device operates from 3.3 V, follow the manufacturer guidance for supply bypass, power sequencing, and voltage limits. Do not estimate battery life from CPU frequency alone; include sensor current, wake duration, communication activity, and DSBOR, DSWDT, and RTCC loading in the energy budget.
Place the required input bypass capacitors immediately across the device supply pins, with the shortest possible return path to ground. Route sensitive ADC and CTMU inputs away from switching nodes and high-current return paths, and use a quiet ground strategy for analog measurements. Follow the SSOP-28 land pattern and pin numbering in the Microchip family datasheet. Confirm programming, reset, and clock connections on the final schematic before fabrication, because the public family documentation covers several pin-count and package options.
Do not assume that an identical package makes every PIC24F16KA302 ordering code an automatic production substitute. The industrial and extended-temperature suffixes represent different environmental qualifications. For PIC24F16KA302T-E/SS to replace PIC24F16KA302T-I/SS, verify ambient-temperature requirements, all electrical characteristics, qualification constraints, and the exact SSOP-28 footprint. Re-run firmware validation because changes in qualification do not necessarily imply changes in software behavior, but they do alter the conditions under which the device must operate correctly.
Treat the 12-bit ADC and CTMU measurement paths as analog interfaces rather than ordinary digital inputs. Keep sensor traces short, shield them where appropriate, and use a defined analog ground reference at the converter. Calibrate CTMU timing and baseline offsets because PCB leakage, humidity, neighboring conductors, and electrode geometry can change the measured capacitance. Establish gain, offset, and noise performance across the intended signal range instead of assuming the nominal 12-bit resolution equals usable accuracy.
Compliance-Informationen
The industrial-temperature suffix identifies the operating grade but does not establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Final product compliance must be confirmed from current Microchip declarations and the selected manufacturing source.