Microchip Technology

PIC24F16KA302T-I/SS - 32MHz XLP MCU | Microchip

MPN: PIC24F16KA302T-I/SS ✓ Aktif
3.3 V Vdss 28-pin SSOP Package 32 MHz Speed 16 KB Flash Memory
MOQ: 1 |

PIC24F16KA302T-I/SS Ringkasan

The Microchip Technology PIC24F16KA302T-I/SS is a 16-bit PIC microcontroller with a 32 MHz CPU, 16 KB of Flash program memory, and a 28-pin SSOP package. It operates from a 3.3 V supply and is designed for power-constrained and battery-powered systems using Microchip XLP technology. Its deep-sleep peripherals include DSBOR, DSWDT, and RTCC.

A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. The PIC24F16KA302 belongs to the 16-bit embedded-control hierarchy: microcontroller, embedded processor, and semiconductor. XLP, or eXtreme Low Power, technology extends that hierarchy into low-power integrated circuits intended for systems that spend substantial time sleeping between measurements or control events.

Key features include 16 MIPS execution performance, 2 KB of data RAM, 512 bytes of data EEPROM, a 12-bit ADC, and CTMU support. The 16 KB Flash memory provides room for application firmware, while EEPROM preserves small amounts of calibration or configuration data across power cycles. The ADC and CTMU make the device useful for analog measurement, capacitive sensing, and mixed-signal control designs.

The device combines a 16-bit RISC architecture with power-management peripherals that remain active in Deep Sleep mode. DSBOR supports brown-out detection, DSWDT provides a watchdog function during low-power operation, and RTCC supports real-time clock functions without requiring continuous high-frequency CPU activity. This architecture favors duty-cycled measurement and control systems in which average energy use matters more than continuous processing throughput.

Typical applications include battery-powered sensor nodes, industrial condition-monitoring devices, compact instrument panels, low-power data loggers, and wearable or portable products. Its 28-pin SSOP package also makes it practical for designs requiring a moderate number of I/O connections without moving to a larger surface-mount package.

PCB design should preserve access to programming, reset, power, and decoupling pins while following the package land pattern and pin definitions in the manufacturer datasheet. Select external crystal or timing components only where the required oscillator configuration calls for them, and size bypass capacitors according to the device power and operating recommendations.

This product page combines the core device specifications, verified package and memory details, same-footprint replacement options, and application guidance. It is designed to help engineers evaluate the PIC24F16KA302T-I/SS for low-power embedded systems without changing the PCB footprint.

Pilihan pengganti yang segera untuk PIC24F16KA302T-I/SS — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera PIC24F16KA302T-I/SS (sama faktor bentuk dan kaki).

Microchip Technology

PIC24F16KA302T-E/SS

✅ Masuk Drop-In
📦 28-pin SSOP
Extended-temperature grade replaces the industrial grade; CPU frequency remains 32 MHz, Flash remains 16 KB, RAM remains 2 KB, and package remains SSOP-28

📋 Alternatif rujukan (tidak dalam katalog)

PIC24F16KA302T-I/SS Penilaian maksimum & Ciri-ciri Elektrik

CPU Architecture 16-bit RISC
Maximum CPU Frequency 32 MHz
Instruction Performance 16 MIPS
Program Memory 16 KB Flash
Program Memory Organization 5.5K x 24 words
Data RAM 2 KB
Data EEPROM 512 bytes
ADC Resolution 12 bits
Tegangan Pemberi Arus 3.3 V
Low-Power Technology PIC XLP, including Deep Sleep operation
Deep-Sleep Peripheral DSBOR
Deep-Sleep Watchdog DSWDT
Real-Time Clock RTCC
Analog Peripheral CTMU
Kemasan 28-pin SSOP
Package Width 5.30 mm
Package Body Width 0.209 inch
Jenis Pemasangan Surface mount
Temperature Grade Industrial grade
RoHS Compliance unknown
REACH Compliance unknown

Panduan Konfigurasi Pin PIC24F16KA302T-I/SS 0.209 inch

Konfigurasi pin untuk PIC24F16KA302T-I/SS (0.209 inch pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 0.209 inch untuk PIC24F16KA302T-I/SS

Tiada data garisan pin yang diperoleh untuk PIC24F16KA302T-I/SS.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

PIC24F16KA302T-I/SS patut untuk 6 aplikasis: Battery-Powered Sensor Node, Industrial Condition Monitoring, Portable Medical Monitor, Capacitive Touch Interface, Low-Power Data Logger, Wearable Health Device.

🔋

Battery-Powered Sensor Node

The PIC24F16KA302T-I/SS fits battery-powered sensor nodes because its 32 MHz 16-bit core provides useful processing performance while XLP mode supports Deep Sleep operation. The device retains DSBOR, DSWDT, and RTCC functions during low-power states, allowing a node to supervise the supply and time events without continuous CPU activity. Its 16 KB Flash stores compact acquisition and filtering firmware, while 2 KB of RAM supports working buffers. The 12-bit ADC handles sensor outputs and CTMU supports capacitive probes. Duty-cycle the measurement sequence around the sensor's settling time to reduce average power consumption.

🏭

Industrial Condition Monitoring

The PIC24F16KA302T-I/SS is appropriate for industrial condition-monitoring equipment that combines local sensing with long idle intervals. Its 12-bit ADC can acquire process or vibration-sensor signals, while the 16-bit CPU performs scaling, filtering, threshold evaluation, and event handling. DSBOR and DSWDT improve robustness by retaining supply and watchdog functions during Deep Sleep, and RTCC provides timekeeping for timestamped records. The 28-pin SSOP package offers enough connections for a sensor interface, communications interface, and local indicators while remaining compact for distributed equipment. Apply signal conditioning and protection appropriate to the monitored source before connecting it to the ADC.

💊

Portable Medical Monitor

The PIC24F16KA302T-I/SS can serve as the controller in a portable medical-monitoring product that combines a small display, sensor input, and battery-powered operation. The 32 MHz processor executes acquisition, filtering, and user-interface updates, while the 12-bit ADC handles suitable analog measurement channels. XLP Deep Sleep operation is valuable between samples, and the RTCC permits event and timestamp management. The 2 KB RAM and 16 KB Flash are sufficient for compact embedded firmware rather than a high-complexity user interface. Designers must add the required medical, electrical-safety, and electromagnetic-compatibility validation for the finished product; the device status alone does not establish compliance.

🖥️

Capacitive Touch Interface

The PIC24F16KA302T-I/SS supports capacitive touch interfaces through its CTMU peripheral and 12-bit ADC. The CTMU can time charge and discharge events associated with external capacitive sensors, allowing firmware to estimate capacitance and detect touches or proximity. Its 32 MHz core can scan multiple electrodes, apply baseline compensation, and update a display or communications interface. Because sensor performance depends on electrode geometry, guarding, leakage, and environmental conditions, calibrate each channel and define filtering rather than treating every capacitance change as a valid touch. The 28-pin SSOP package also leaves pins available for a human interface and communication circuitry.

📟

Low-Power Data Logger

The PIC24F16KA302T-I/SS is well suited to a low-power data logger that records periodic environmental or process measurements. The 16 KB Flash stores firmware and may support buffered records, 2 KB of RAM provides working storage, and 512 bytes of EEPROM preserves configuration values. DSBOR and DSWDT remain useful while the logger is idle, and RTCC can establish record timing without keeping the CPU continuously active. Its 12-bit ADC supports common analog sensors through suitable scaling and conditioning. Optimize energy use by controlling the sensor power, sampling frequency, and communications schedule, then confirm write endurance against the expected logging rate and retention requirements.

📱

Wearable Health Device

The PIC24F16KA302T-I/SS can control a compact wearable health device where battery life and component size are primary constraints. Its XLP Deep Sleep architecture allows the processor to sleep between sensor samples while DSWDT, DSBOR, and RTCC continue low-power functions. The 12-bit ADC and CTMU support suitable analog and capacitive measurements, and the 16-bit core can perform baseline correction and filtering before storing results. The SSOP-28 package is useful for compact assemblies, although the final enclosure and body-contact design determine practical wearable suitability. Validate sensor accuracy, skin-contact safety, radio coexistence, and applicable product requirements as part of the complete system design.

Ringkasan Produk Disebarkan

PIC24F16KA302T-I/SS Microchip Technology Dipergunakan di: Battery-Powered Sensor Node, Industrial Condition Monitoring, Portable Medical Monitor, Capacitive Touch Interface, Low-Power Data Logger, Wearable Health Device MCP3426A6-E/MS Microchip Technology Dipergunakan di: Battery-Powered Sensor Node MCP3421A1-E/MC Low-noise ADC option for precision analog channels Dipergunakan di: Industrial Condition Monitoring MCP6001T-I/OT Low-power operational amplifier for analog conditioning Dipergunakan di: Portable Medical Monitor MCP6002T-I/OT Low-power amplifier for sensor interface conditioning Dipergunakan di: Capacitive Touch Interface MCP3424T-I/ST Multi-channel ADC option for additional logger inputs Dipergunakan di: Low-Power Data Logger MCP6004-I/SL Microchip Technology Dipergunakan di: Wearable Health Device
What are the key specifications of PIC24F16KA302T-I/SS that engineers should know?
The PIC24F16KA302T-I/SS is a 3.3 V, 16-bit PIC microcontroller rated for 32 MHz operation and 16 MIPS performance. According to the Microchip datasheet, it provides 16 KB of Flash program memory, 2 KB of data RAM, 512 bytes of EEPROM, a 12-bit ADC, and CTMU support in a 28-pin SSOP package. Its principal differentiator is XLP low-power operation with DSBOR, DSWDT, and RTCC capabilities during Deep Sleep mode.
What is the operating voltage of PIC24F16KA302T-I/SS?
The PIC24F16KA302T-I/SS operates from a 3.3 V supply. According to the Microchip product documentation, this device belongs to the PIC24 XLP family for power-constrained and battery-powered applications. The 3.3 V operating point supports direct use in conventional embedded-control systems, although individual rails and peripherals must remain within their detailed datasheet limits. Use the manufacturer pin-description table when assigning supply and ground connections.
What memory and processing resources does PIC24F16KA302T-I/SS provide?
The PIC24F16KA302T-I/SS provides a 32 MHz 16-bit RISC core with 16 MIPS performance, 16 KB of Flash program memory organized as 5.5K x 24 words, 2 KB of data RAM, and 512 bytes of data EEPROM. According to the Microchip datasheet, Flash stores firmware, RAM supports working variables, and EEPROM retains small configuration or calibration values across power cycles. These resources fit compact control, sensing, and data-logging products.
Why is PIC24F16KA302T-I/SS suitable for battery-powered devices?
The PIC24F16KA302T-I/SS is suitable for battery-powered devices because it combines a 32 MHz 16-bit processor with XLP low-power operation. According to the Microchip product page, DSBOR, DSWDT, and RTCC can operate in Deep Sleep mode, allowing a duty-cycled product to reduce activity between measurement or control events. The 16 KB Flash and 2 KB RAM capacities support compact firmware without requiring an external memory device.
What peripherals are available on PIC24F16KA302T-I/SS?
The PIC24F16KA302T-I/SS includes a 12-bit ADC, CTMU, DSBOR, DSWDT, and RTCC functions alongside its 16-bit CPU. According to the Microchip documentation, CTMU supports capacitive measurement and analog front-end work, while the ADC acquires analog inputs. DSBOR and DSWDT strengthen brown-out and watchdog supervision in low-power systems, and RTCC supports timekeeping functions.
Where can I download the PIC24F16KA302T-I/SS datasheet PDF?
The official PIC24F16KA302T-I/SS datasheet and supporting documents are available through the Microchip product page at https://www.microchip.com/en-us/product/PIC24F16KA302. The family datasheet covers the 20-pin, 28-pin, 44-pin, and 48-pin devices in the PIC24F16KA302 family. Use its pin-description table, electrical-characteristics section, and memory map when qualifying the exact SSOP-28 ordering code.
Where can I find the PIC24F16KA302T-I/SS pinout?
The PIC24F16KA302T-I/SS pinout is documented in the pin-description table of the Microchip PIC24F16KA302 family datasheet. The exact target is a 28-pin SSOP device, so use the 28-pin drawing rather than a diagram for the 20-pin, 44-pin, or 48-pin members. Confirm programming, reset, power, ground, I/O, and exposed-function assignments directly from the manufacturer table before laying out the PCB.
What is the best drop-in replacement for PIC24F16KA302T-I/SS?
PIC24F16KA302T-E/SS is the closest documented same-package replacement because it retains the SSOP-28 format and the same PIC24F16KA302 family architecture while changing the temperature qualification from industrial to extended. According to the Microchip family documentation, both devices provide 16 KB of Flash, 2 KB of RAM, and 512 bytes of EEPROM. Confirm the temperature range, operating conditions, and qualification requirements before production substitution.
Can PIC24F16KA302T-E/SS replace PIC24F16KA302T-I/SS?
PIC24F16KA302T-E/SS can serve as a pin-compatible replacement when its extended temperature grade is acceptable for the application. Both parts use the 28-pin SSOP package and belong to the PIC24F16KA302 family with a 32 MHz 16-bit core, 16 KB of Flash, 2 KB of RAM, and 512 bytes of EEPROM. The meaningful distinction is temperature qualification, so verify the required ambient range and all electrical limits before substitution.
PIC24F16KA302T-I/SS vs PIC24F16KA302T-E/SS: which is better?
PIC24F16KA302T-I/SS is the better choice for industrial-temperature requirements, while PIC24F16KA302T-E/SS is intended for extended-temperature operation. According to Microchip ordering information, both use the same 28-pin SSOP package and retain 16 KB of Flash, 2 KB of RAM, 512 bytes of EEPROM, and a 32 MHz CPU. Choose based on required environmental range rather than basic pin count or memory capacity.
When should I choose PIC24F16KA302T-I/SS instead of another PIC24 MCU?
Choose PIC24F16KA302T-I/SS when a design needs a compact 28-pin SSOP, 32 MHz 16-bit control, 16 KB of Flash, and battery-conscious operation with peripherals that continue functioning in Deep Sleep. According to the Microchip datasheet, DSBOR, DSWDT, and RTCC support low-power supervision and timekeeping. Select a different PIC24 family member when more Flash, RAM, I/O, communication peripherals, or a different package are required.
Is PIC24F16KA302T-I/SS suitable for capacitive sensing applications?
The PIC24F16KA302T-I/SS is suitable for capacitive sensing because it combines CTMU support with a 12-bit ADC and a 32 MHz control core. According to the Microchip datasheet, CTMU provides the charge-timing hardware needed for capacitance measurement, while the ADC supports analog signal acquisition. Firmware must compensate for parasitics, calibration drift, environmental effects, and the specific sensor geometry.
How does XLP technology benefit a PIC24F16KA302T-I/SS design?
XLP technology benefits a PIC24F16KA302T-I/SS design by reducing the energy required during idle periods while retaining low-power monitoring functions. According to the Microchip product page, DSBOR, DSWDT, and RTCC operate in Deep Sleep mode. This allows a sensor node to wake for measurement or control work and return to a low-power state without leaving essential supervision or timekeeping functions unattended.
Where can I buy PIC24F16KA302T-I/SS online?
The PIC24F16KA302T-I/SS can be requested through the Request a Quote form on this page. The exact ordering code identifies the 16 KB Flash, 2 KB RAM, industrial-temperature 28-pin SSOP configuration with tape-and-reel packaging. Request the current commercial quotation, availability, minimum order quantity, and lead time through that form so procurement receives the exact MPN and package variant needed for assembly.
What is the lead time for PIC24F16KA302T-I/SS?
The current lead time for PIC24F16KA302T-I/SS should be confirmed through the Request a Quote form on this page. Lead time can vary with the requested quantity, package configuration, production schedule, and inventory position. A complete request should state the exact MPN, target quantity, delivery location, and required schedule so procurement can provide a current manufacturing and fulfillment assessment.
What is the price of PIC24F16KA302T-I/SS?
The current commercial price for PIC24F16KA302T-I/SS is available through the Request a Quote form on this page. The request should specify the required quantity, reel format, shipment destination, and target schedule. Because pricing and availability can change with order volume and market conditions, request a quotation rather than relying on a historical catalog figure when preparing a production BOM.

Data referensi kejuruteraan untuk PIC24F16KA302T-I/SS — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose PIC24F16KA302T-I/SS for industrial-temperature embedded systems that need a 32 MHz 16-bit controller, 16 KB of Flash, 2 KB of RAM, and low-power operation in a 28-pin SSOP package. It is particularly useful when a design uses the 12-bit ADC, CTMU, DSBOR, DSWDT, or RTCC and can benefit from Deep Sleep operation. Choose PIC24F16KA302T-E/SS instead when the application requires the extended-temperature grade; it retains the same package, core, memory, and peripheral configuration. For designs needing more memory, I/O, communication peripherals, or a different package, select another PIC24 family member rather than forcing a footprint-compatible part with insufficient resources.

Perbandingan dengan Gantian

Parametr Produk Ini PIC24F16KA302T-E/SS
Brand Microchip Technology Microchip Technology
Package 28-pin SSOP 28-pin SSOP
CPU Architecture 16-bit RISC 16-bit RISC
Maximum CPU Frequency 32 MHz 32 MHz
Instruction Performance 16 MIPS 16 MIPS
Program Memory 16 KB Flash 16 KB Flash
Data RAM 2 KB 2 KB
Data EEPROM 512 bytes 512 bytes
ADC Resolution 12 bits 12 bits
Low-Power Features XLP, DSBOR, DSWDT, RTCC, Deep Sleep XLP, DSBOR, DSWDT, RTCC, Deep Sleep
Temperature Grade Industrial grade Extended-temperature grade
Analog Peripheral CTMU CTMU

Penyeberangsung Jelas

  • Maintains the same core performance in a drop-in SSOP-28 format (vsPIC24F16KA302T-E/SS)
  • Combines XLP low-power control with real-time and supervision functions (vsPIC24F16KA302T-E/SS)
  • Combines mixed-signal measurement with compact embedded control (vsPIC24F16KA302T-E/SS)

Catatan Desain

Use the XLP low-power architecture deliberately: place the PIC24F16KA302T-I/SS into Deep Sleep during long idle periods, retain only the peripherals required by the application, and wake it through the intended interrupt source. Disable unused peripherals to reduce leakage. Because the device operates from 3.3 V, follow the manufacturer guidance for supply bypass, power sequencing, and voltage limits. Do not estimate battery life from CPU frequency alone; include sensor current, wake duration, communication activity, and DSBOR, DSWDT, and RTCC loading in the energy budget.

Place the required input bypass capacitors immediately across the device supply pins, with the shortest possible return path to ground. Route sensitive ADC and CTMU inputs away from switching nodes and high-current return paths, and use a quiet ground strategy for analog measurements. Follow the SSOP-28 land pattern and pin numbering in the Microchip family datasheet. Confirm programming, reset, and clock connections on the final schematic before fabrication, because the public family documentation covers several pin-count and package options.

Do not assume that an identical package makes every PIC24F16KA302 ordering code an automatic production substitute. The industrial and extended-temperature suffixes represent different environmental qualifications. For PIC24F16KA302T-E/SS to replace PIC24F16KA302T-I/SS, verify ambient-temperature requirements, all electrical characteristics, qualification constraints, and the exact SSOP-28 footprint. Re-run firmware validation because changes in qualification do not necessarily imply changes in software behavior, but they do alter the conditions under which the device must operate correctly.

Treat the 12-bit ADC and CTMU measurement paths as analog interfaces rather than ordinary digital inputs. Keep sensor traces short, shield them where appropriate, and use a defined analog ground reference at the converter. Calibrate CTMU timing and baseline offsets because PCB leakage, humidity, neighboring conductors, and electrode geometry can change the measured capacitance. Establish gain, offset, and noise performance across the intended signal range instead of assuming the nominal 12-bit resolution equals usable accuracy.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The industrial-temperature suffix identifies the operating grade but does not establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Final product compliance must be confirmed from current Microchip declarations and the selected manufacturing source.

Data disahkan pada: 2026-11-20 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

PIC24F16KA302T-I/SS datasheet PIC24F16KA302T-I/SS pinout PIC24F16KA302T-I/SS specifications PIC24F16KA302 datasheet pdf PIC24F16KA302T-I/SS price PIC24F16KA302T-I/SS stock PIC24F16KA302T-I/SS replacement PIC24F16KA302T-I/SS equivalent PIC24F16KA302T-I/SS vs PIC24F16KA302T-E/SS PIC24F16KA302 SSOP-28 footprint PIC24F16KA302 CTMU application PIC24F16KA302 XLP deep sleep Microchip PIC24F16KA302T-I/SS PIC24F16KA302T-I/SS programming PIC24F16KA302T-I/SS SSOP-28 pinout

Komponen dan Tanda berkaitan

Microchip Technology PIC24F16KA302T-I/SS PIC24F16KA302T-E/SS PIC24F16KA302 PIC24 PIC XLP 16-bit RISC microcontroller embedded microcontroller semiconductor 16 KB Flash memory 2 KB data RAM 512-byte EEPROM 12-bit ADC CTMU DSBOR DSWDT RTCC Deep Sleep mode 28-pin SSOP SSOP package family surface-mount package SMD battery-powered electronics industrial condition monitoring capacitive touch sensing
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ