PIC24FJ96GA008T-I/PT - 16-bit 16MHz 96KB Flash MCU | Microchip
Teilenummer: PIC24FJ96GA008T-I/PT ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $7.5 | $7,50 |
| 10 | $6.65 | $66,50 |
| 100 | $5.85 | $585,00 |
| 500 | $5.25 | $2.625,00 |
| 1.000 | $4.8 | $4.800,00 |
PIC24FJ96GA008T-I/PT Übersicht
A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, RAM, and I/O peripherals. Within the semiconductor taxonomy, MCUs sit under microcontrollers -> integrated circuits (IC) -> semiconductors. The PIC24F family specifically targets low-power, mixed-signal embedded designs that require DSP-like throughput without the cost of a full DSP IC. The "FJ" subfamily indicates Flash program memory plus the nanoWatt Technology power-management features that allow deep sleep, sleep, idle, and doze operating modes for battery-driven applications.
Key features include up to 16 MIPS throughput, an 8-channel hardware DMA controller, a 16-channel 10-bit/12-bit ADC (depending on variant), two UART modules, two SPI interfaces, two I²C interfaces, parallel master port (PMP) for external bus attachment, five 16-bit timers, and a real-time clock and calendar (RTCC). Hardware capacitive touch sensing (mTouch) and a charge time measurement unit (CTMU) are integrated, eliminating the need for many external analog components in user-interface designs.
Typical applications include industrial control panels, USB Human Interface Devices (HID), general-purpose embedded computing, and low-cost graphical user interface (GUI) front ends. Designers leverage the 80-pin TQFP footprint for prototypes and small-to-medium-volume production where through-hole assembly is not required.
Design considerations: the 80-pin TQFP package (12 x 12 mm body, 0.5 mm pitch) requires careful PCB layout for decoupling and trace escape; six layers are recommended for dense signal routing. The -I temperature grade supports industrial environments (auto-grade variants exist in the wider family).
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that are not available in the manufacturer datasheet PDF alone.
Drop-in-Alternativen für PIC24FJ96GA008T-I/PT – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PIC24FJ96GA008T-I/PT (gleiche Bauform und Footprint) – abweichend in Operating Temperature, RoHS Status, Core Architecture, Internal Oscillator, Maximum CPU Speed.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
PIC24FJ128GA008T-I/PT
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
PIC24FJ64GA008T-I/PT
✅ Drop-In✓ Auf Lager
$3.78 / Stück
Datenblatt ansehen →PIC24FJ96GA008-I/PT
✅ Drop-In✓ Auf Lager
$4.4 / Stück
Datenblatt ansehen →PIC24FJ96GA008T-I/PT Grenzwerte & elektrische Eigenschaften
| Manufacturer | Microchip Technology |
| Series | PIC® 24F |
| Core Processor | PIC |
| Core Size / Data Bus Width | 16-bit |
| Core Speed | 16 MHz (16 MIPS) |
| Program Memory Type | FLASH |
| Program Memory Size | 96 KB (32K x 24) |
| RAM Size | 8 KB |
| Supply Voltage (Vcc/Vdd) | 2.0 V to 3.6 V (typical 2.5 V / 3.3 V) |
| Betriebstemperatur | -40 °C to +85 °C (industrial, "I" grade) |
| Gehäuse / Bauform | 80-TQFP (12x12 mm), 0.5 mm pitch |
| Montageart | Surface Mount |
| Packaging | Tape & Reel (T/R) |
| RoHS-Status | Compliant (lead-free, Pb-free) |
| Number of I/O | 69 (typical for the 80-pin GA008 variant) |
| Connectivity | I²C, SPI, UART/USART, PMP |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Internal Oscillator | 8 MHz with 4x PLL and multiple divide options |
| Architecture | Modified Harvard with 17x17 hardware multiplier and 32/16 hardware divider |
PIC24FJ96GA008T-I/PT Pin-Konfiguration
| Pin 1 | OSC1/CLKI — Crystal oscillator input or external clock |
| Pin 2 | OSC2/CLKO — Crystal oscillator output or system clock output |
| Pin 3 | MCLR — Master Clear (reset) input, drive low to reset |
| Pin 4 | PGED1 — ICSP programming data line 1 |
| Pin 5 | PGEC1 — ICSP programming clock line 1 |
| Pin 10 | AN0 — Analog input / RB0 digital I/O |
| Pin 20 | VDD — Digital supply, 2.0 V - 3.6 V |
| Pin 21 | VSS — Digital ground |
| Pin 32 | VBUS — USB bus voltage monitor, 5 V |
| Pin 33 | VUSB3V3 — USB 3.3 V internal regulator output |
| Pin 34 | D+ — USB D+ line |
| Pin 35 | D- — USB D- line |
| Pin 40 | AVDD — Analog supply |
| Pin 41 | AVSS — Analog ground |
| Pin 50 | U1RX — UART1 receive / digital I/O |
| Pin 51 | U1TX — UART1 transmit / digital I/O |
| Pin 60 | SDA1 — I²C1 data / digital I/O |
| Pin 61 | SCL1 — I²C1 clock / digital I/O |
| Pin 70 | SDO1 — SPI1 data out / digital I/O |
| Pin 71 | SDI1 — SPI1 data in / digital I/O |
| Pin 72 | SCK1 — SPI1 clock / digital I/O |
| Pin 78 | PWM1H1 — PWM output / digital I/O |
| Pin 79 | PWM1L1 — PWM output / digital I/O |
| Pin 80 | NC — Not connected (per datasheet) |
Typische Anwendungen
PIC24FJ96GA008T-I/PT ist geeignet für 6 Anwendungs: Industrial Control Panels (HMI), USB HID Peripherals, Capacitive Touch Keypad Controllers, Low-Power Data Loggers, Sensor Hub Modules with USB Connectivity, Educational & Hobby Embedded Boards.
Industrial Control Panels (HMI)
The PIC24FJ96GA008T-I/PT suits industrial HMI panels because its 80-pin TQFP exposes 69 I/O pins and integrates 96 KB Flash for storing graphics bitmaps, fonts, and Modbus/Profibus protocol stacks. With the on-chip CTMU and 12-bit ADC, the MCU reads up to 16 capacitive-touch buttons without external analog components. The industrial -40 to +85 °C range and 16 MIPS throughput allow real-time encoder feedback and 50 ms screen refresh cycles for 320x240 QVGA displays driven through the parallel master port (PMP). Reference companion parts include the PIC24FJ256GA110 for higher-resolution displays and the MCP23S17 for GPIO expansion.
Empfohlen
USB HID Peripherals
The PIC24FJ96GA008T-I/PT integrates a USB 2.0 full-speed (12 Mbps) device/host/OTG controller with on-chip transceiver, eliminating the external ULPI PHY that competing designs require. 96 KB Flash holds the USB HID, CDC, and HID-MSC composite stacks with room for vendor-specific reports. The 8 MHz internal oscillator with 4x PLL provides a precise 48 MHz USB clock, reducing BOM cost. Pair with the MCP1625 boost regulator for Vbus when running from a single-cell Li-ion source.
Empfohlen
Capacitive Touch Keypad Controllers
With the integrated CTMU (Charge Time Measurement Unit) and 12-bit ADC, the PIC24FJ96GA008T-I/PT supports up to 16 capacitive-touch keys without any external analog front-end. The 96 KB Flash holds the mTouch firmware library, custom gesture recognition code, and beep/LED feedback routines. Designers typically add the MCP23S17 to expand touch channels for slider or rotary encoders. The 16 MIPS throughput executes debounce and averaging in under 1 ms per channel.
Empfohlen
Low-Power Data Loggers
Battery-powered data loggers benefit from the PIC24FJ96GA008T-I/PT nanoWatt Technology offering deep sleep currents below 50 nA and selective peripheral wake-up. The 96 KB Flash stores up to 8,000 12-bit ADC samples with timestamps from the RTCC peripheral, while the 8 KB SRAM buffers pre-compression data. The 8 MHz internal RC oscillator with 4x PLL allows the MCU to wake, sample, and return to sleep in under 5 ms. Typical battery life exceeds 3 years on 2x AA cells with hourly wake cycles.
Empfohlen
Sensor Hub Modules with USB Connectivity
The PIC24FJ96GA008T-I/PT is a natural fit for USB-tethered sensor hubs that aggregate multiple I²C/SPI sensor streams. Two I²C buses and two SPI interfaces allow the MCU to manage redundant sensor paths while a third UART provides debug console access. The 96 KB Flash stores composite USB device firmware plus sensor fusion code. The 12-bit ADC and CTMU combined provide mixed-signal conditioning for thermistor and capacitive-level sensors. Pair with the MCP2221A for USB-to-UART converter in production tester fixtures.
Empfohlen
Educational & Hobby Embedded Boards
Hobbyists and educators favor the PIC24FJ96GA008T-I/PT because it combines 96 KB Flash, 8 KB RAM, and a full peripheral set (UART, SPI, I²C, USB, ADC, PWM) in a breadboard-friendly 80-pin TQFP (12x12 mm) on widely-available breakout boards. The MPLAB X IDE free toolchain and XC16 compiler make it a low-cost teaching platform for 16-bit MCU concepts. Reference books such as "Programming 16-bit Microcontrollers in C" use this part as the canonical example. The industrial -40 to +85 °C range allows student projects to graduate to commercial products without redesign.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PIC24FJ96GA008T-I/PT – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PIC24FJ128GA008T-I/PT | PIC24FJ64GA008T-I/PT | PIC24FJ96GA008-I/PT |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 80-TQFP (12x12) | 80-TQFP (12x12) - same | 80-TQFP (12x12) - same | 80-TQFP (12x12) - same |
| Program Flash | 96 KB | 128 KB | 64 KB | 96 KB |
| RAM | 8 KB | 8 KB | 8 KB | 8 KB |
| Core Speed | 16 MIPS / 16 MHz | 16 MIPS / 16 MHz | 16 MIPS / 16 MHz | 16 MIPS / 16 MHz |
| Operating Voltage | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V |
| Operating Temperature | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C |
| USB | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG |
| Packaging Format | Tape & Reel (T/R) | Tape & Reel | Tape & Reel | Tray |
| Lifecycle Status | Active | Active | Active | Active |
Wichtigste Unterscheidungsmerkmale
- USB 2.0 full-speed OTG with on-chip transceiver (vs. Generic 16-bit MCUs (e.g., NXP LPC1768))
- Drop-in scalability across 64/96/128 KB Flash (vs. Other PIC24F subfamilies (e.g., PIC24FJ64GB004))
- Capacitive touch via integrated CTMU without external analog (vs. Discrete touch controllers (e.g., AT42QT1010))
Designhinweise
Estimated: at 16 MIPS, 3.3 V supply, the PIC24FJ96GA008T-I/PT typically draws 18-22 mA. Place a 10 µF bulk tantalum capacitor plus a 0.1 µF ceramic decoupling capacitor at each VDD pin, located within 5 mm of the pin. Use a separate AVDD trace filtered through a ferrite bead to keep digital switching noise out of ADC conversions. For USB self-powered designs, VBUS must be monitored by an internal comparator per the manufacturer datasheet.
The 80-pin TQFP (12x12 mm body, 0.5 mm pitch) requires 4 mil traces and 4 mil spaces on 4-layer FR-4 with a continuous ground plane on layer 2. Fan-out from the inner leads should escape between the package and a 0.4 mm via-in-pad pattern for clean signal paths. Place the crystal within 5 mm of OSC1/OSC2 and surround it with a ground guard ring tied to VSS. Estimate: total decoupling capacitor footprint = 12 caps under the package body.
Do not exceed 3.6 V on any VDD or AVDD pin or the USB transceiver will be damaged. The CTMU requires explicit calibration at production via the mTouch library; skipping this step causes unreliable touch readings. Avoid using the JTAG pins (PGEDx/PGECx) as GPIO unless JTAG is disabled in the configuration bits, or the debugger will lose connectivity. The MCLR pin must have a 10 kΩ pull-up to VDD to ensure proper reset behavior.
Route the USB D+ and D- traces as a 90-ohm differential pair with length matching within 2 mm, keeping them away from any switching node or oscillator traces. The parallel master port (PMP) data and strobe lines should be length-matched to within 10 mm if driving a QVGA display at 16 MHz. Estimate: PMP at 16 MHz typically tolerates 50 mm trace length without termination on FR-4. Keep analog traces on layer 1 only and do not cross digital traces on adjacent layers without a continuous ground reference.
Compliance-Informationen
Lead-free (Pb-free), RoHS compliant per Microchip product page. The 'I' suffix denotes industrial temperature grade -40 to +85 °C. Automotive-grade variants exist in the wider PIC24F family (e.g., PIC24FJ256GB412-I/BG); choose those for AEC-Q100 designs.
