PIC32MX210F016CT-I/TL - 40MHz 32-bit MCU 16KB Flash USB | Microchip
Teilenummer: PIC32MX210F016CT-I/TL ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $3.62 | $3,62 |
| 10 | $3.26 | $32,60 |
| 100 | $2.84 | $284,00 |
| 500 | $2.51 | $1.255,00 |
| 1.000 | $2.18 | $2.180,00 |
| 3.000 | $1.92 | $5.760,00 |
PIC32MX210F016CT-I/TL Übersicht
A 32-bit microcontroller (MCU) is an integrated circuit that combines a 32-bit CPU, program and data memory, and a rich set of on-chip peripherals into a single chip. PIC32 devices sit within the broader taxonomy of microcontrollers -> embedded controllers -> semiconductor ICs -> integrated circuits. The MIPS32 M4K core delivers deterministic performance with single-cycle hardware multiply and a five-stage pipeline, giving PIC32MX parts a notable edge over 8/16-bit MCUs in signal-processing and protocol-handling tasks.
Key features include 10-bit ADC up to 1 Msps with up to 9 channels, two UART, two I2C, two SPI, and a Parallel Master Port (PMP). Peripheral Pin Select (PPS) remaps peripherals to any digital I/O, simplifying PCB routing and pin-out reuse. Separate PLLs for the system clock and USB clock allow full-speed USB OTG operation at exactly 48 MHz without disturbing CPU timing, and four DMA channels offload data movement from the CPU.
Typical applications include USB peripherals (HID, CDC, Mass Storage), low-cost graphics/text terminals using PMP-driven LCDs, sensor hubs with USB diagnostics, industrial control interfaces, and connected consumer devices. The compact 5x5 mm VTLA package is well-suited to space-constrained designs and supports lead-free reflow per JEDEC J-STD-020.
When laying out the PCB, place the 0.1 uF decoupling cap and bulk capacitor within 3 mm of VDD/AVDD, and provide a continuous ground pour beneath the part to pull heat out of the exposed pad. Always keep VBUS sensing lines short and use the on-chip 3.3V USB transceiver rather than discrete ones.
This page consolidates distributor pricing, pin-compatible alternatives, and engineering design notes not found in the manufacturer datasheet alone, helping engineers select and source the PIC32MX210F016CT-I/TL with confidence.
Drop-in-Alternativen für PIC32MX210F016CT-I/TL – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PIC32MX210F016CT-I/TL (gleiche Bauform und Footprint) – abweichend in ADC, Package, DMA Channels, Maximum CPU Frequency, Operating Temperature Range.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
PIC32MX210F016CT-V/TL
✅ Drop-In✓ Auf Lager
$1.73 / Stück
Datenblatt ansehen →PIC32MX210F016CT-50V/TL
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
PIC32MX210F016C-I/TL
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
PIC32MX110F016CT-I/TL
✅ Drop-In✓ Auf Lager
$1.84 / Stück
Datenblatt ansehen →PIC32MX130F128LT-I/PF
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$3.3 / Stück
Datenblatt ansehen →PIC32MX150F128CT-I/TL
✅ Drop-In✓ Auf Lager
$2.41 / Stück
Datenblatt ansehen →PIC32MX154F128DT-I/TL
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
PIC32MX210F016CT-I/TL Grenzwerte & elektrische Eigenschaften
| Core Architecture | MIPS32 M4K |
| Core Count | Single-Core |
| Datenbusbreite | 32-bit |
| Maximum CPU Frequency | 40 MHz |
| Program Memory Type | FLASH |
| Program Memory Size | 16 KB (16K x 8) |
| RAM Size | 4 KB |
| Operating Voltage Range | 2.3 V to 3.6 V |
| Betriebstemperaturbereich | -40C to +85C (Industrial) |
| Gehäuse / Bauform | 36-VTLA (5x5 mm) with Exposed Pad |
| Montageart | Surface Mount |
| USB Interface | USB 2.0 Full-Speed OTG |
| ADC | 10-bit, up to 1 Msps |
| DMA Channels | 4 |
| Connectivity | I2C x2, SPI x2, USB OTG, UART x2, PMP |
| Peripheral Pin Select (PPS) | Yes |
| RoHS-Status | Compliant |
| Lead-Free | Yes |
PIC32MX210F016CT-I/TL Pin-Konfiguration
| Pin 1 | VDD — Core supply voltage (2.3 V to 3.6 V) |
| Pin 2 | RA0 — General I/O / analog input |
| Pin 3 | RA1 — General I/O / analog input |
| Pin 4 | RA2 — General I/O / analog input |
| Pin 5 | RA3 — General I/O / analog input |
| Pin 6 | RA4 — General I/O / analog input |
| Pin 7 | VSS — Ground |
| Pin 8 | RA7 — General I/O / OSC1 crystal |
| Pin 9 | RA8 — General I/O / OSC2 crystal |
| Pin 10 | RB0 — General I/O |
| Pin 11 | RB1 — General I/O |
| Pin 12 | RB2 — General I/O |
| Pin 13 | RB3 — General I/O |
| Pin 14 | RB4 — General I/O |
| Pin 15 | RB5 — General I/O |
| Pin 16 | RB6 — General I/O / ICD programming clock |
| Pin 17 | RB7 — General I/O / ICD programming data |
| Pin 18 | VSS — Ground |
| Pin 19 | RC0 — General I/O |
| Pin 20 | RC1 — General I/O |
| Pin 21 | RC2 — General I/O |
| Pin 22 | RC3 — General I/O |
| Pin 23 | RC4 — General I/O |
| Pin 24 | RC5 — General I/O |
| Pin 25 | RC6 — General I/O |
| Pin 26 | RC7 — General I/O |
| Pin 27 | RC8 — General I/O |
| Pin 28 | RC9 — General I/O |
| Pin 29 | D+ — USB D+ data line |
| Pin 30 | D- — USB D- data line |
| Pin 31 | VBUS — USB VBUS sense input (5 V tolerant) |
| Pin 32 | VUSB — USB transceiver supply (3.3 V internal LDO output) |
| Pin 33 | VDD — Core supply voltage |
| Pin 34 | ENVREG — Internal voltage regulator enable |
| Pin 35 | AVDD — Analog supply voltage |
| Pin 36 | AVSS — Analog ground |
Typische Anwendungen
PIC32MX210F016CT-I/TL ist geeignet für 6 Anwendungs: USB HID / CDC Peripherals, USB Mass Storage / Sensor Dongles, Industrial Control Interfaces, Low-Cost Graphics / Character LCD Terminals, Connected Consumer Devices, Medical / Wellness Monitoring.
USB HID / CDC Peripherals
The PIC32MX210F016CT-I/TL is ideal for USB Human Interface Device and Communication Device Class peripherals thanks to its integrated USB 2.0 Full-Speed OTG controller and dedicated 48 MHz USB PLL. With 40 MHz MIPS32 M4K throughput plus 16 KB Flash and 4 KB SRAM, it can host the Microchip USB HID bootloader plus a small application without external memory. Connect a USB-C or micro-B receptacle directly to D+/D- pins with the recommended 33kΩ pull-up on D+ for full-speed device mode. The on-chip 3.3V regulator and small 36-VTLA 5x5 mm package make this MCU a strong fit for USB sticks, custom keyboards, and configuration dongles.
Empfohlen
USB Mass Storage / Sensor Dongles
The PIC32MX210F016CT-I/TL suits USB Mass Storage Class and sensor-logging dongles because the integrated USB OTG controller, PMP bus, and 4 KB SRAM can move 16 KB of buffered data into external SPI Flash and present it as a removable disk. The MIPS32 M4K core runs the MSD-only or CDC+MSD composite stack easily at 40 MHz. Connect SD-card or SPI Flash to SPI2 and the on-chip DMA channels transfer blocks in the background. Industrial -40C to +85C rating enables use in field-deployed instrumentation, and the compact 5x5 mm VTLA saves PCB area for stick-style dongles.
Empfohlen
Industrial Control Interfaces
The PIC32MX210F016CT-I/TL fits industrial control interface boards because its 40 MHz MIPS32 M4K core plus dual UART, dual SPI, dual I2C, and PMP bus can drive isolated RS-485 ports, sensor hubs, and HMI keypads. The 10-bit 1 Msps ADC handles feedback loops for motor starters or valve controllers, and the industrial -40C to +85C grade matches factory floor temperatures. PPS routes the two UARTs and I2C lines to any digital pin for board layout reuse. For multi-axis controllers, the four DMA channels relieve the CPU when sampling feedback at high rates.
Empfohlen
Low-Cost Graphics / Character LCD Terminals
The PIC32MX210F016CT-I/TL drives small character LCDs and TFT displays because the integrated Parallel Master Port (PMP) and Peripheral Pin Select (PPS) support 8-bit or 16-bit data plus control signals at up to 25 MHz. The 40 MHz MIPS32 M4K core easily refreshes 320x240 displays at 60 fps using the Microchip Graphics Library, and 4 KB SRAM holds display frame buffers for monochrome panels. The 36-VTLA 5x5 mm package suits compact HMI panels where 32-bit performance is needed over an 8-bit PIC16. Designers should add a 10 nF cap on the reset pin and 0.1 uF near each VDD/AVDD pair.
Empfohlen
Connected Consumer Devices
The PIC32MX210F016CT-I/TL fits USB-connected home and consumer products because it integrates USB OTG, two UARTs, two SPIs, and two I2Cs, covering BLE radios, Wi-Fi co-processors, sensors, and EEPROM storage. The 16 KB Flash and 4 KB SRAM can host USB CDC plus AT-command stack in <10 KB, leaving room for product logic. Industrial -40C to +85C rating covers indoor use cases with wider margins for outdoor enclosures. The compact 36-VTLA 5x5 mm package suits small-form-factor connected thermostats, smart plugs, and consumer hubs.
Empfohlen
Medical / Wellness Monitoring
The PIC32MX210F016CT-I/TL suits medical and wellness devices because it integrates a 10-bit ADC at 1 Msps for biosensor sampling, USB OTG for data transfer to host PCs, and PPS for layout-friendly sensor routing. The MIPS32 M4K core runs simple heart-rate or temperature monitor algorithms in real time without off-chip memory. Industrial -40C to +85C rating supports home-health environments. For regulated medical use, however, a Microchip PIC32MK or dsPIC33A medical-grade MCU with safety documentation is recommended; the MX210 is suitable for non-critical wellness products.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PIC32MX210F016CT-I/TL – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PIC32MX210F016CT-V/TL | PIC32MX210F016CT-50V/TL | PIC32MX110F016CT-I/TL | PIC32MX150F128CT-I/TL | PIC32MX154F128DT-I/TL |
|---|---|---|---|---|---|---|
| Package | 36-VTLA (5x5 mm) | 36-VTLA (5x5 mm) - same | 36-VTLA (5x5 mm) - same | 36-VTLA (5x5 mm) - same | 36-VTLA (5x5 mm) - same | 36-VTLA (5x5 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Max CPU Frequency | 40 MHz | 40 MHz | 50 MHz (+25%) | 40 MHz | 40 MHz | 40 MHz |
| Flash Memory | 16 KB | 16 KB | 16 KB | 16 KB | 128 KB (+700%) | 128 KB (+700%) |
| RAM Size | 4 KB | 4 KB | 4 KB | 4 KB | 32 KB (+700%) | 32 KB (+700%) |
| USB OTG | Yes (Full-Speed) | Yes | Yes | Yes | Yes | Yes |
| Temperature Grade | Industrial -40C to +85C | Extended -40C to +105C | Extended -40C to +105C | Industrial -40C to +85C | Industrial -40C to +85C | Industrial -40C to +85C |
| Unit Price (qty-1, as of 2026-10-01) | $3.62 | approx $3.80 | approx $4.10 | approx $3.20 | approx $4.85 | approx $5.00 |
Wichtigste Unterscheidungsmerkmale
- On-chip USB OTG with dedicated USB PLL (vs. PIC32MX170F256B-I/SP)
- Industrial temperature grade with compact 5x5 mm package (vs. PIC32MX210F016CT-V/TL)
- Higher-performance 50 MHz variant exists in same package (vs. PIC32MX210F016CT-50V/TL)
Designhinweise
Decouple every VDD/AVDD pair with a 0.1 uF ceramic capacitor within 3 mm of the pin. Place a bulk 4.7-10 uF tantalum or ceramic at the regulator output (ENVREG=1). The VUSB pin requires a 0.47 uF cap for the internal 3.3 V USB regulator. Inadequate decoupling is the most common cause of brown-out resets and erratic USB enumeration.
The 36-VTLA package has an exposed thermal pad that MUST be soldered to a continuous ground copper pour to meet thermal specifications. Route USB D+/D- as a 90-ohm differential pair with no stubs, keep them short (<25 mm), and place the common-mode choke as close to the connector as practical. The Microchip MPLAB Harmony USB stack expects specific pin assignments; consult the family pinout table before finalizing layout.
Do not exceed the 3.6 V absolute maximum on any pin including VBUS; USB VBUS can be 5 V, so leave the on-chip USB regulator enabled (ENVREG pin tied high). For ICD connections always include the dedicated 2-wire ICSP header on PGEC1/PGED1 even if you plan to use USB bootloader, otherwise recovery from locked devices becomes expensive. Ensure the part is configured for USB PLL mode (SPLL=3, USBSIDL=0) or USB will not enumerate.
Compliance-Informationen
RoHS compliant per Microchip product page; not AEC-Q100 qualified - choose PIC32MX1xx automotive variants for vehicle applications.