PIC32MX370F512LT-V/PT - 80MHz 32-bit MCU 512KB Flash TQFP-100 | Microchip
Teilenummer: PIC32MX370F512LT-V/PT ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $8.42 | $8,42 |
| 10 | $7.55 | $75,50 |
| 100 | $6.78 | $678,00 |
| 500 | $5.96 | $2.980,00 |
| 1.000 | $5.18 | $5.180,00 |
PIC32MX370F512LT-V/PT Übersicht
A 32-bit microcontroller (microcontroller unit, MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile working memory, and a configurable set of digital and communication peripherals. The PIC32MX3/4 family sits in the broader taxonomy of PIC32 microcontrollers -> 32-bit microcontrollers -> microcontrollers -> microcontrollers and processors -> semiconductor. MIPS-based PIC32 devices share the Harvard architecture heritage of the PIC family while adding a 32-bit data path, 32-bit registers, and deterministic interrupt latency that make them well suited to real-time embedded control.
Key features include 512 KB Flash, 128 KB SRAM, 4 KB EEPROM, a 10-bit ADC capable of up to 1 Msps, five 16-bit timers/counters, two comparators, two SPI/I2S, two I2C, and USB 2.0 full-speed device/host/OTG. The core executes most instructions in one cycle, delivering up to 1.50 DMIPS/MHz, or about 120 DMIPS at 80 MHz. The 100-pin TQFP exposes up to 83 I/O pins and supports 5V-tolerant inputs.
Typical applications include industrial automation and control panels, USB-equipped embedded peripherals, graphical HMI front panels driving small LCDs, consumer audio accessories that leverage the I2S peripherals, and ruggedized IoT edge nodes that need industrial temperature endurance. The combination of USB, a 28-channel ADC and a generous pin count makes this part particularly useful as a single-chip supervisory controller for mixed-signal boards.
When designing with this device, place a 1uF decoupling capacitor on each VDD/VDDCORE pin pair and route the analog AVSS/AVDD traces away from switching nodes to keep ADC noise low. The trace pins (TRCLK, TRD0..3) are optional and should be grounded if unused; the JTAG TMS/TCK/TDO/TDI pins are likewise optional for production programming via ICSP.
This page synthesizes distributor pricing, drop-in same-package equivalents, and practical design notes that go beyond the manufacturer datasheet alone.
Drop-in-Alternativen für PIC32MX370F512LT-V/PT – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PIC32MX370F512LT-V/PT (gleiche Bauform und Footprint) – abweichend in I/O Pins, Package, Core Architecture, Operating Temperature, Operating Voltage.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
PIC32MX370F512LT-I/PT
✅ Drop-In✓ Auf Lager
$5.75 / Stück
Datenblatt ansehen →PIC32MX370F512L-I/PT
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
PIC32MX270F512L-V/PT
✅ Drop-In✓ Auf Lager
$6.48 / Stück
Datenblatt ansehen →PIC32MX170F512L-V/PT
✅ Drop-In✓ Auf Lager
$5.4 / Stück
Datenblatt ansehen →PIC32MX350F256L-V/PT
✅ Drop-In✓ Auf Lager
$5.45 / Stück
Datenblatt ansehen →PIC32MX370F512LT-V/PT Grenzwerte & elektrische Eigenschaften
| Core Architecture | MIPS32 M4K |
| Core Type | 32-bit RISC |
| Series | PIC32MX3xx/4xx |
| Family | PIC32MX370 |
| Maximum CPU Speed | 80 MHz (120 MHz option in family) |
| Program Memory (Flash) | 512 KB (512K x 8) |
| Data SRAM | 128 KB |
| EEPROM | 4 KB |
| Gehäuse | 100-pin TQFP (PT) 12x12 mm |
| Montageart | Surface Mount |
| Betriebstemperatur | -40C to +105C (V grade) |
| Operating Voltage | 2.3V to 3.6V |
| I/O Pins | 83 |
| ADC | 10-bit, up to 28 channels |
| Analog Comparators | 2 |
| SPI / I2S | 2 |
| I2C | 2 |
| UART | Up to 6 |
| USB | USB 2.0 Full-Speed Device/Host/OTG |
| Timers | 5 x 16-bit |
| DMA Channels | 4 |
| DMIPS | Up to 120 DMIPS at 80 MHz |
| MSL-Level | 3 |
| RoHS-Status | Compliant |
| Lead-Free | Yes |
PIC32MX370F512LT-V/PT 100-pin tqfp (pt) 12x12 mm Pinbelegungsleitfaden
Pinbelegung für PIC32MX370F512LT-V/PT (100-pin tqfp (pt) 12x12 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für PIC32MX370F512LT-V/PT.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
PIC32MX370F512LT-V/PT ist geeignet für 7 Anwendungs: Industrial Control Panels and HMI, USB-Equipped Embedded Peripherals, Audio Streaming and I2S Bridges, Graphical HMI Front Panels, Ruggedized IoT Edge Nodes, Automotive Cabin Modules, Test and Measurement Instrumentation.
Industrial Control Panels and HMI
The PIC32MX370F512LT-V/PT fits industrial control panels because it combines the -40C to +105C extended industrial temperature grade with 83 I/O pins, a 28-channel 10-bit ADC for analog sensor inputs, and 512 KB Flash for full-featured HMI firmware stacks. It is placed as the supervisory MCU between field sensors (4-20 mA, RTD, thermocouple via ADC) and a small TFT or segment LCD. Performance benefit: the 80 MHz core delivers 120 DMIPS, sufficient for real-time Modbus RTU or CANopen handling alongside UI rendering without timing overrun.
Empfohlen
USB-Equipped Embedded Peripherals
The PIC32MX370F512LT-V/PT fits USB peripherals because it integrates a USB 2.0 Full-Speed (12 Mbps) controller with on-chip transceiver, supporting device, host, and OTG roles without an external PHY. It is used as the main MCU in HID devices, USB-to-UART bridges, USB audio class devices, and USB mass-storage controllers. Performance benefit: 512 KB Flash hosts the Microchip Harmony USB stack plus application code; the dedicated USB DP/DN pins on the 100-pin TQFP simplify PCB routing and EMI compliance.
Empfohlen
Audio Streaming and I2S Bridges
The PIC32MX370F512LT-V/PT fits audio streaming because it exposes two SPI/I2S peripherals that can act as I2S master/slave for digital audio codecs, plus 512 KB Flash for buffering and DSP effects. It is placed as a USB-to-I2S bridge, S/PDIF adapter, or as the MCU in a headphone amplifier with on-board EQ. Performance benefit: at 80 MHz the core can sustain 48 kHz/24-bit stereo I2S with headroom for SRC and basic DSP filtering; the V grade (-40C to +105C) suits automotive cabin audio modules.
Empfohlen
Graphical HMI Front Panels
The PIC32MX370F512LT-V/PT fits graphical HMI front panels because it offers 512 KB Flash to host graphics libraries, a 28-channel ADC for touch/analog inputs, and parallel master port (PMP) capability to drive small TFT displays directly. It is placed as the main MCU behind 3.5-inch to 5-inch TFT touchscreens in appliances, and small industrial HMIs. Performance benefit: PMP-driven TFT up to 480x272 is feasible at 80 MHz; the 100-pin TQFP exposes enough data/control lines for 16-bit parallel display bus without muxing.
Empfohlen
Ruggedized IoT Edge Nodes
The PIC32MX370F512LT-V/PT fits ruggedized IoT edge nodes because of its -40C to +105C temperature range, USB for commissioning, two I2C/SPI for sensor hubs, and 512 KB Flash for edge-processing firmware with secure boot. It is placed as the supervisory MCU aggregating Modbus sensors, sending an analog feed to a wireless module (Wi-Fi/BLE/LTE-M) via UART, and managing local control loops. Performance benefit: the DMA controller offloads repetitive ADC sampling to peripherals, freeing the core for application logic at low power.
Empfohlen
Automotive Cabin Modules
The PIC32MX370F512LT-V/PT fits automotive cabin modules because the V temperature rating tolerates -40C to +105C cabin conditions, and the 100-pin TQFP footprint allows exposed GPIO for HVAC actuators, lighting drivers, and CAN connectivity via external controllers. It is placed as a body controller for HVAC blowers, seat controllers, and rear-seat infotainment. Performance benefit: PIC32MX3xx family is recommended in automotive body and cabin modules by Microchip automotive application notes; the 512 KB Flash hosts CANopen/J1939 stacks alongside cabin UI logic.
Empfohlen
Test and Measurement Instrumentation
The PIC32MX370F512LT-V/PT fits low-cost test and measurement because it combines a 1 Msps 28-channel ADC, 512 KB Flash for waveform processing, USB for PC connectivity, and 5 x 16-bit timers for precise event timing. It is placed as the main MCU in bench DMMs, panel meters, low-bandwidth spectrum analyzers, and lab automation controllers. Performance benefit: at 80 MHz, real-time RMS calculations and simple FFTs are feasible; USB TMC support allows direct integration with National Instruments-style test software.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PIC32MX370F512LT-V/PT – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PIC32MX370F512LT-I/PT | PIC32MX370F512L-I/PT | PIC32MX270F512L-V/PT | PIC32MX170F512L-V/PT | PIC32MX350F256L-V/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-pin TQFP (PT) 12x12 mm | 100-pin TQFP (PT) 12x12 mm - same | 100-pin TQFP (PT) 12x12 mm - same | 100-pin TQFP (PT) 12x12 mm - same | 100-pin TQFP (PT) 12x12 mm - same | 100-pin TQFP (PT) 12x12 mm - same |
| Core | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit |
| Max CPU Speed | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 50 MHz | 80 MHz |
| Program Flash | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 256 KB |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 64 KB | 128 KB |
| Operating Temperature | -40C to +105C | -40C to +85C | -40C to +85C | -40C to +105C | -40C to +105C | -40C to +105C |
| USB | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS Device/Host | USB 2.0 FS Device/Host | USB 2.0 FS OTG |
Wichtigste Unterscheidungsmerkmale
- Largest Flash and SRAM in PIC32MX370 family with extended -40C to +105C temp grade (vs. PIC32MX350F256L-V/PT)
- Native USB 2.0 Full-Speed with OTG on-chip transceiver eliminates external PHY cost (vs. PIC32MX170F512L-V/PT)
- Same 100-pin TQFP footprint as PIC32MX270 and PIC32MX170 families for board reuse (vs. PIC32MX370F512HT-V/PT)
- Extended industrial temperature rating (-40C to +105C) for outdoor and automotive cabin designs (vs. PIC32MX370F512LT-I/PT)
Designhinweise
Place a 1uF decoupling capacitor within 5 mm of every VDD/VDDCORE pin pair, plus a 10uF bulk capacitor on the main 3.3V rail. The PIC32MX370 internal 1.8V LDO powers the core from VDD; no external core supply is required for production parts. Use a ferrite bead to isolate AVDD from VDD if ADC noise exceeds 1 LSB.
Estimated: at 80 MHz with peripherals active, core current draw is approximately 35-45 mA at 3.3V. The 100-pin TQFP package has theta_JA around 40 C/W on a standard 4-layer JEDEC test board, so continuous 45 mA (about 150 mW dissipation) yields a 6C junction temperature rise. No heatsink is needed for normal operation; derate CPU speed above 70C ambient if tight timing budgets are required.
Route the USB DP/DN traces as a 90-ohm differential pair on the top layer, with continuous ground reference underneath. Keep analog AVDD/AVSS traces away from switching nodes and PWM outputs to minimize ADC noise coupling. Reserve a footprint for a 32.768 kHz crystal on SOSCO/SOSCI if RTC accuracy is needed; otherwise ground both pins and use the internal RC oscillator.
Do not leave the MCLR pin floating - it must be tied to VDD through a 10 kohm resistor with a 100 nF cap to ground for reliable reset. The JTAG TMS/TCK/TDO/TDI pins default to alternate functions after reset; if unused, configure them as outputs and leave them disconnected. Programming via ICSP requires PGECx/PGEDx pins to remain accessible on the final PCB.
Locate the parallel master port (PMP) data/control pins in a contiguous group on the PCB to simplify routing to the TFT/LCD connector. Place a 4.7k pull-up on SDA and SCL if I2C peripherals are present. For USB-OTG applications, add a 10uF bulk capacitor on VBUS and a current-limiting FET on the host VBUS output per USB 2.0 spec.
Compliance-Informationen
RoHS and REACH compliant per Microchip product page. Not AEC-Q100 qualified - the standard PIC32MX3/4 family is industrial-grade, not automotive-grade. For AEC-Q100 automotive qualified PIC32 parts, see Microchip's PIC32MX automotive family.