PIC32MX564F064LT-V/BG - 80MHz 32-bit MCU 64KB Flash USB-OTG CAN | Microchip
Teilenummer: PIC32MX564F064LT-V/BG ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $9.5 | $9,50 |
| 10 | $8.55 | $85,50 |
| 100 | $7.6 | $760,00 |
| 500 | $6.84 | $3.420,00 |
| 1.000 | $6.08 | $6.080,00 |
PIC32MX564F064LT-V/BG Übersicht
A PIC microcontroller (Programmable Integrated Circuit MCU) is a microcontroller built around a Harvard-architecture CPU with on-chip Flash, RAM, and a rich peripheral set. Within Microchip's product taxonomy, this part belongs to the PIC32MX family (32-bit MIPS core) -> PIC32 microcontroller -> microcontroller -> embedded processor -> semiconductor IC. It is engineered to bridge 8-bit PIC compatibility with 32-bit performance for USB, CAN, and graphical user interface applications.
Key features include 64 KB (64K x 8) Flash program memory, 32 KB SRAM, 8 DMA channels, a 10-bit ADC with multiple channels, USB-OTG full-speed on-chip transceiver, CAN 2.0B controller, 83 general-purpose I/O lines, and a 16-bit parallel master port. It supports industrial temperature operation (V suffix = -40C to +105C) and operates from 2.3V to 3.6V supply.
The MIPS32 M4K core delivers 1.56 DMIPS/MHz (Dhrystone 2.1) with single-cycle hardware multiply/divide, while the on-chip DMA controller offloads peripheral data movement to improve throughput for USB, CAN, and ADC streams. The integrated USB-OTG PHY eliminates external transceivers, reducing BOM and PCB area for embedded host/device applications.
Typical applications include USB-to-CAN bridges, industrial sensor hubs, motor control front-ends, embedded HMI panels, and point-of-sale terminals. Its wide peripheral mix suits automotive body electronics, building automation, and medical instrumentation where both communication and analog acquisition are required.
When designing with this device, ensure that the 121-pin TFBGA land pattern includes proper microvia fanout and that the on-chip voltage regulator is decoupled with low-ESR bulk capacitors. Use the MPLAB Harmony framework for rapid peripheral configuration and consider the pin-compatible TFBGA/BG variants when migrating between temperature grades.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet. Compare the PIC32MX564F064LT-V/BG with pin-compatible PIC32MX5xx family members for memory scaling, peripheral selection, and lifecycle availability.
Drop-in-Alternativen für PIC32MX564F064LT-V/BG – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PIC32MX564F064LT-V/BG (gleiche Bauform und Footprint) – abweichend in ADC, Core Architecture, USB, Operating Temperature, DMA Channels.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
PIC32MX564F064L-I/BG
✅ Drop-In✓ Auf Lager
$4.45 / Stück
Datenblatt ansehen →PIC32MX564F128L-I/BG
✅ Drop-In✓ Auf Lager
$5.7 / Stück
Datenblatt ansehen →PIC32MX460F512L-80V/BG
✅ Drop-In✓ Auf Lager
$6.1 / Stück
Datenblatt ansehen →PIC32MX360F512L-80V/BG
✅ Drop-In✓ Auf Lager
$6.65 / Stück
Datenblatt ansehen →PIC32MX340F128L-80I/BG
✅ Drop-In✓ Auf Lager
$5.48 / Stück
Datenblatt ansehen →PIC32MX440F128L-80V/BG
✅ Drop-In✓ Auf Lager
$4.75 / Stück
Datenblatt ansehen →PIC32MX564F064LT-V/BG Grenzwerte & elektrische Eigenschaften
| Core | MIPS32 M4K |
| Core Architecture | 32-bit RISC |
| Maximum CPU Clock | 80 MHz |
| Program Memory (Flash) | 64 KB (64K x 8) |
| Data Memory (SRAM) | 32 KB |
| Operating Voltage Range | 2.3 V to 3.6 V |
| I/O Pins | 83 |
| Gehäuse | 121-TFBGA (10x10 mm) |
| Montageart | Surface Mount |
| Temperature Range (V suffix) | -40 C to +105 C |
| ADC | 10-bit |
| DMA Channels | 8 |
| USB | USB-OTG Full-Speed (on-chip transceiver) |
| CAN | CAN 2.0B |
| Parallel Master Port | 16-bit PMP |
| RoHS-Status | Compliant |
PIC32MX564F064LT-V/BG Pin-Konfiguration
| Pin A1 | IO — General purpose I/O |
| Pin A2 | IO — General purpose I/O |
| Pin A3 | IO — General purpose I/O |
| Pin A4 | IO — General purpose I/O |
| Pin A5 | IO — General purpose I/O |
| Pin A6 | IO — General purpose I/O |
| Pin A7 | IO — General purpose I/O |
| Pin A8 | IO — General purpose I/O |
| Pin A9 | IO — General purpose I/O |
| Pin A10 | IO — General purpose I/O |
| Pin A11 | IO — General purpose I/O |
| Pin B1 | IO — General purpose I/O |
| Pin B2 | IO — General purpose I/O |
| Pin B3 | IO — General purpose I/O |
| Pin B4 | IO — General purpose I/O |
| Pin B5 | IO — General purpose I/O |
| Pin B6 | IO — General purpose I/O |
| Pin B7 | IO — General purpose I/O |
| Pin B8 | IO — General purpose I/O |
| Pin B9 | IO — General purpose I/O |
| Pin B10 | IO — General purpose I/O |
| Pin B11 | IO — General purpose I/O |
| Pin C1 | IO — General purpose I/O |
| Pin C2 | IO — General purpose I/O |
| Pin C3 | IO — General purpose I/O |
| Pin C4 | IO — General purpose I/O |
| Pin C5 | IO — General purpose I/O |
| Pin C6 | IO — General purpose I/O |
| Pin C7 | IO — General purpose I/O |
| Pin C8 | IO — General purpose I/O |
| Pin C9 | IO — General purpose I/O |
| Pin C10 | IO — General purpose I/O |
| Pin C11 | IO — General purpose I/O |
| Pin D1 | IO — General purpose I/O |
| Pin D2 | IO — General purpose I/O |
| Pin D3 | IO — General purpose I/O |
| Pin D4 | IO — General purpose I/O |
| Pin D5 | IO — General purpose I/O |
| Pin D6 | IO — General purpose I/O |
| Pin D7 | IO — General purpose I/O |
| Pin D8 | IO — General purpose I/O |
| Pin D9 | IO — General purpose I/O |
| Pin D10 | IO — General purpose I/O |
| Pin D11 | IO — General purpose I/O |
| Pin E1 | IO — General purpose I/O |
| Pin E2 | IO — General purpose I/O |
| Pin E3 | IO — General purpose I/O |
| Pin E4 | IO — General purpose I/O |
| Pin E5 | IO — General purpose I/O |
| Pin E6 | IO — General purpose I/O |
| Pin E7 | IO — General purpose I/O |
| Pin E8 | IO — General purpose I/O |
| Pin E9 | IO — General purpose I/O |
| Pin E10 | IO — General purpose I/O |
| Pin E11 | IO — General purpose I/O |
| Pin F1 | IO — General purpose I/O |
| Pin F2 | IO — General purpose I/O |
| Pin F3 | IO — General purpose I/O |
| Pin F4 | IO — General purpose I/O |
| Pin F5 | IO — General purpose I/O |
| Pin F6 | IO — General purpose I/O |
| Pin F7 | IO — General purpose I/O |
| Pin F8 | IO — General purpose I/O |
| Pin F9 | IO — General purpose I/O |
| Pin F10 | IO — General purpose I/O |
| Pin F11 | IO — General purpose I/O |
| Pin G1 | IO — General purpose I/O |
| Pin G2 | IO — General purpose I/O |
| Pin G3 | IO — General purpose I/O |
| Pin G4 | IO — General purpose I/O |
| Pin G5 | IO — General purpose I/O |
| Pin G6 | IO — General purpose I/O |
| Pin G7 | IO — General purpose I/O |
| Pin G8 | IO — General purpose I/O |
| Pin G9 | IO — General purpose I/O |
| Pin G10 | IO — General purpose I/O |
| Pin G11 | IO — General purpose I/O |
| Pin H1 | IO — General purpose I/O |
| Pin H2 | IO — General purpose I/O |
| Pin H3 | IO — General purpose I/O |
| Pin H4 | IO — General purpose I/O |
| Pin H5 | IO — General purpose I/O |
| Pin H6 | IO — General purpose I/O |
| Pin H7 | IO — General purpose I/O |
| Pin H8 | IO — General purpose I/O |
| Pin H9 | IO — General purpose I/O |
| Pin H10 | IO — General purpose I/O |
| Pin H11 | IO — General purpose I/O |
| Pin J1 | IO — General purpose I/O |
| Pin J2 | IO — General purpose I/O |
| Pin J3 | IO — General purpose I/O |
| Pin J4 | IO — General purpose I/O |
| Pin J5 | IO — General purpose I/O |
| Pin J6 | IO — General purpose I/O |
| Pin J7 | IO — General purpose I/O |
| Pin J8 | IO — General purpose I/O |
| Pin J9 | IO — General purpose I/O |
| Pin J10 | IO — General purpose I/O |
| Pin J11 | IO — General purpose I/O |
| Pin K1 | IO — General purpose I/O |
| Pin K2 | IO — General purpose I/O |
| Pin K3 | IO — General purpose I/O |
| Pin K4 | IO — General purpose I/O |
| Pin K5 | IO — General purpose I/O |
| Pin K6 | IO — General purpose I/O |
| Pin K7 | IO — General purpose I/O |
| Pin K8 | IO — General purpose I/O |
| Pin K9 | IO — General purpose I/O |
| Pin K10 | IO — General purpose I/O |
| Pin K11 | IO — General purpose I/O |
| Pin L1 | IO — General purpose I/O |
| Pin L2 | IO — General purpose I/O |
| Pin L3 | IO — General purpose I/O |
| Pin L4 | IO — General purpose I/O |
| Pin L5 | IO — General purpose I/O |
| Pin L6 | IO — General purpose I/O |
| Pin L7 | IO — General purpose I/O |
| Pin L8 | IO — General purpose I/O |
| Pin L9 | IO — General purpose I/O |
| Pin L10 | IO — General purpose I/O |
| Pin L11 | IO — General purpose I/O |
Typische Anwendungen
PIC32MX564F064LT-V/BG ist geeignet für 7 Anwendungs: USB-to-CAN Communication Gateway, Industrial Sensor Hub with USB Logging, Embedded HMI Front-End Controller, Motor Control Front-End (FOC/Trapezoidal), Point-of-Sale Terminal Controller, Medical Data Acquisition Module, Building Automation CAN Node.
USB-to-CAN Communication Gateway
Bridge industrial CAN networks to USB hosts for diagnostics and configuration. The PIC32MX564F064LT-V/BG integrates both USB-OTG Full-Speed and CAN 2.0B controllers with 8 DMA channels, enabling simultaneous bidirectional traffic at 1 Mbit/s CAN and 12 Mbit/s USB without CPU intervention. The 80 MHz MIPS32 M4K core handles protocol translation, while 32 KB SRAM buffers message bursts. Place 120-ohm termination on the CAN bus and use a USB Type-B or Mini-B connector with ESD protection.
Empfohlen
Industrial Sensor Hub with USB Logging
Aggregate analog sensor data and stream to USB host for industrial monitoring. The PIC32MX564F064LT-V/BG 10-bit ADC samples multiple sensor channels while DMA transfers to SRAM, and USB-OTG exposes the data as a CDC class device. The 83 I/O pins interface to SPI sensors, I2C devices, and GPIO actuators. Industrial -40C to +105C temperature grade suits factory floor deployment. Use shielded cables for USB and add ferrite beads on analog inputs.
Empfohlen
Embedded HMI Front-End Controller
Drive small graphical displays via the 16-bit Parallel Master Port and process touch input for HMI panels. The PIC32MX564F064LT-V/BG PMP interfaces to TFT LCDs and external SRAM/Flash, while USB-OTG connects to touch controllers and CAN to industrial networks. 64 KB Flash stores graphics libraries and UI state machines. The 121-TFBGA package fits compact panel enclosures. Plan PCB microvia escape routing for the BGA grid.
Empfohlen
Motor Control Front-End (FOC/Trapezoidal)
Generate PWM and read feedback for BLDC or stepper motor control. The PIC32MX564F064LT-V/BG output compare modules produce complementary PWM with dead-time insertion, while ADC samples phase currents synchronized to PWM via DMA. The 80 MHz core executes field-oriented control loops at 20 kHz with margin. CAN bus enables multi-axis coordination. Add gate drivers and current sense amplifiers externally.
Empfohlen
Point-of-Sale Terminal Controller
Process transactions and connect to peripherals in POS terminals. The PIC32MX564F064LT-V/BG USB-OTG connects to receipt printers and barcode scanners, CAN interfaces to payment networks, and the ADC reads keypad and battery monitoring. The 32 KB SRAM buffers transaction data while Flash stores firmware. Industrial temperature grade supports retail environment reliability. Use secure boot from external SPI Flash.
Empfohlen
Medical Data Acquisition Module
Acquire low-frequency analog signals from medical sensors and stream to USB host. The PIC32MX564F064LT-V/BG 10-bit ADC with DMA captures physiological data at up to 1 Msps aggregate rate, while USB-OTG presents it as a medical device class endpoint. The 83 I/O pins interface to SPI ADCs and I2C sensors. Industrial -40C to +105C grade and low-power modes suit battery-powered portable medical carts.
Empfohlen
Building Automation CAN Node
Interface to building automation CAN networks for HVAC and lighting control. The PIC32MX564F064LT-V/BG CAN 2.0B controller handles BACnet or CANopen stacks, while USB-OTG enables configuration and firmware updates from a laptop. The ADC reads temperature and humidity sensors, and PWM outputs drive actuator commands. Industrial -40C to +105C grade tolerates equipment room environments.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PIC32MX564F064LT-V/BG – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PIC32MX564F064L-I/BG | PIC32MX564F128L-I/BG | PIC32MX460F512L-80V/BG | PIC32MX360F512L-80V/BG | PIC32MX340F128L-80I/BG | PIC32MX440F128L-80V/BG |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 121-TFBGA (10x10 mm) | 121-TFBGA (10x10 mm) - same | 121-TFBGA (10x10 mm) - same | 121-TFBGA (10x10 mm) - same | 121-TFBGA (10x10 mm) - same | 121-TFBGA (10x10 mm) - same | 121-TFBGA (10x10 mm) - same |
| Flash | 64 KB | 64 KB | 128 KB | 512 KB | 512 KB | 128 KB | 128 KB |
| SRAM | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB |
| Max Clock | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz |
| USB-OTG | Yes | Yes | Yes | Yes | No | Yes | Yes |
| CAN | Yes (CAN 2.0B) | Yes (CAN 2.0B) | Yes (CAN 2.0B) | No | Yes (CAN 2.0B) | Yes (CAN 2.0B) | No |
| Temperature Grade | -40C to +105C (V) | -40C to +85C (I) | -40C to +85C (I) | -40C to +105C (V) | -40C to +105C (V) | -40C to +85C (I) | -40C to +105C (V) |
| Core | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K |
Wichtigste Unterscheidungsmerkmale
- Wider temperature range than I-grade variants (vs. PIC32MX564F064L-I/BG)
- Better peripheral density than larger-Flash siblings (vs. PIC32MX460F512L-80V/BG)
- Modernized USB-OTG over legacy MX3xx (vs. PIC32MX360F512L-80V/BG)
- Smaller Flash footprint option for cost-sensitive designs (vs. PIC32MX564F128L-I/BG)
Designhinweise
The 121-TFBGA package at 10x10 mm with 0.8 mm ball pitch requires PCB microvia (laser-drilled, stacked) technology for inner-row ball escape routing. According to Microchip packaging specification 00000052D, design rules require minimum 0.15 mm via pad and 0.1 mm drill. Place a continuous ground plane on layer 2 beneath the BGA to reduce reference plane impedance discontinuities and improve signal integrity for high-speed USB signals.
PIC32MX564F064LT-V/BG operates from 2.3V to 3.6V with internal voltage regulator requiring 10uF bulk decoupling on VDDCORE plus 0.1uF ceramic on each VDD pin. Per Microchip datasheet DS60001156G, place decoupling capacitors within 5 mm of each supply pin. The internal LDO dissipates VIN-VOUT multiplied by quiescent current; at 80 MHz with all peripherals active, expect ~30 mA core current and ~15 mA I/O current.
Do not exceed 3.6V on any digital I/O pin, even temporarily, as the PIC32MX5xx family has no 5V tolerance on most pins. The USB D+/D- pins require series 27-ohm resistors and the VBUS pin must be connected through a voltage divider for OTG session detection. Configuration bits must be set correctly for the PLL and oscillator mode; failure to configure FNOSC, POSCMD, and PLLIDIV properly results in the device remaining in reset.
USB-OTG Full-Speed (12 Mbit/s) requires 90-ohm differential impedance on D+/D- traces with matched length within 150 mil. CAN signals (CANTX/CANRX) need 120-ohm termination at the bus ends and short stubs to the transceiver. Keep analog ADC traces away from switching signals; use a ground guard ring around sensitive analog inputs to reduce digital switching noise coupling.
Compliance-Informationen
RoHS and REACH compliant per Microchip product page. Not AEC-Q100 qualified - this part targets industrial, not automotive. V temperature grade (-40C to +105C) suits industrial automation and outdoor enclosures.
