SSD1963 - 1215KB Frame Buffer LCD Controller, 864x480 | Solomon Systech
Teilenummer: SSD1963 ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $6.2 | $6,20 |
| 10 | $5.58 | $55,80 |
| 100 | $4.96 | $496,00 |
| 500 | $4.34 | $2.170,00 |
| 1.000 | $3.72 | $3.720,00 |
| 3.000 | $3.1 | $9.300,00 |
SSD1963 Übersicht
An LCD display controller is a semiconductor device that bridges a host microcontroller and a TFT liquid-crystal panel. It receives drawing commands and pixel data over a parallel or serial bus from the host MCU, stores the rendered image in an embedded frame buffer, and continuously refreshes the connected TFT panel through its dedicated LCD interface. Within the broader electronics taxonomy, the SSD1963 sits in the display driver hierarchy as: LCD controller -> display driver IC -> power management IC-adjacent component -> semiconductor. This class of device is fundamental wherever a microcontroller must drive a mid-sized color TFT panel without paying the cost of an external SDRAM or a high-pin-count FPGA.
Key features include a hardware-accelerated 2D BitBLT engine, hardware cursor, rotation support (0/90/180/270 degrees), programmable PWM backlight control, integrated PLL for pixel clock generation from a single crystal, and GPIO expansion. The host interface supports Intel 8080 and Motorola 6800 bus modes plus SPI, allowing it to attach to virtually any 8/16/32-bit MCU.
The SSD1963 uses a built-in PLL to synthesize the pixel clock from a 10 MHz external crystal, supporting panel refresh rates up to 60 Hz and beyond. Its 1215KB embedded SRAM eliminates the need for external video memory, simplifying PCB layout and BOM. The integrated BitBLT engine offloads rectangular fills, copies, and color expansion from the host MCU.
Typical applications include 4.3-inch to 7-inch TFT LCD modules with resistive or capacitive touch, industrial HMI panels, point-of-sale terminals, medical instrument displays, and Arduino/STM32 hobbyist projects using common SSD1963 breakout boards. The wide host-interface compatibility makes it a versatile choice when migrating between MCU families.
When designing with the SSD1963, observe the LQFP-128 PCB footprint guidelines and provide at least four-layer routing for clean pixel clock and data lane impedance. Initialize the PLL configuration register carefully: incorrect multiplier values can stall the LCD interface without raising any error flag.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that the bare manufacturer datasheet does not surface, giving engineers a faster path to a working TFT design.
Drop-in-Alternativen für SSD1963 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
SSD1963QL9
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
SSD1963G4
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
SSD1963 Grenzwerte & elektrische Eigenschaften
| Product Type | TFT LCD Display Controller |
| Frame Buffer Size | 1215 KB embedded SRAM |
| Maximum Panel Resolution | 864 x 480 x 24-bit |
| Color Depth | Up to 24 bpp (16.7M colors) |
| Host Interface | 8/9/16/18/24-bit parallel (8080/6800), SPI |
| LCD Output Interface | Parallel RGB TFT (up to 24-bit) |
| Display Effects Engine | 2D BitBLT hardware accelerator |
| Rotation Support | 0 / 90 / 180 / 270 degrees |
| Backlight Control | Programmable PWM output |
| Pixel Clock Source | Integrated PLL with 10 MHz crystal reference |
| Gehäuse | LQFP-128 |
| Montageart | Surface Mount |
| RoHS-Status | Compliant |
SSD1963 lqfp-128 Pinbelegungsleitfaden
Pinbelegung für SSD1963 (lqfp-128-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für SSD1963.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
SSD1963 ist geeignet für 7 Anwendungs: 4.3-inch to 7-inch TFT LCD Modules, Industrial Human-Machine Interface (HMI) Panels, Point-of-Sale (POS) Terminals and Kiosks, Medical Instrument Displays, Arduino and STM32 Hobbyist TFT Projects, Automotive Infotainment and Cluster Displays (Secondary), Digital Signage and Information Displays.
4.3-inch to 7-inch TFT LCD Modules
The SSD1963's 1215 KB embedded frame buffer and 864 x 480 x 24-bit panel support make it the de-facto controller for off-the-shelf 4.3-inch, 5.0-inch, and 7.0-inch TFT modules from suppliers such as BuyDisplay and EastRising. It eliminates external SDRAM, simplifying PCB layout to a single LQFP-128 plus the host MCU. With 16-bit parallel host throughput and hardware BitBLT, full-screen redraws at 60 Hz are easily achieved from an STM32F4 or similar Cortex-M4 host. The integrated PWM backlight driver removes one more external component.
Empfohlen
Industrial Human-Machine Interface (HMI) Panels
Factory-floor HMIs demand robust parallel interfaces, wide temperature tolerance, and long product lifecycles, all of which the SSD1963 supports through its industrial-grade LQFP-128 package and proven parallel 8080/6800 host bus. Its 1215 KB frame buffer holds full 800x480 canvases so operators see flicker-free menus even during complex BitBLT animations. Solomon Systech's continued production status (active lifecycle as of 2026-10-20) keeps HMI platforms in supply for multi-year deployments.
Empfohlen
Point-of-Sale (POS) Terminals and Kiosks
POS terminals need vivid color graphics, fast updates for transaction screens, and a reliable host bus. The SSD1963's 24-bit color depth renders product images and QR codes crisply on 7-inch panels, while its hardware cursor accelerates menu navigation. The integrated PLL from a single 10 MHz crystal simplifies the BOM versus controllers that need a separate pixel-clock generator, reducing both cost and EMI footprint.
Empfohlen
Medical Instrument Displays
Patient monitors, infusion displays, and portable diagnostic equipment demand crisp, low-noise visuals and a wide operating temperature range. The SSD1963's 24-bit color and 1215 KB frame buffer allow waveforms and numeric vital signs to be drawn without tearing, while its LQFP-128 industrial package survives -40C to +85C environments typical of clinical electronics. The hardware BitBLT engine accelerates graph redraws without burdening the medical MCU.
Empfohlen
Arduino and STM32 Hobbyist TFT Projects
Maker and hobbyist communities favor the SSD1963 because of inexpensive breakout boards from BuyDisplay, Waveshare, and similar vendors, plus open-source libraries (UTFT, TFT_eSPI variants). The Arduino Mega 2560 drives the SSD1963 over its 16-bit data bus for high-throughput full-screen updates, while the Arduino Due uses 8-bit at 3.3V. The host flexibility lets hobbyists reuse the same panel across 5V and 3.3V projects.
Empfohlen
Automotive Infotainment and Cluster Displays (Secondary)
While the SSD1963 is not AEC-Q100 qualified, it appears in non-safety automotive applications such as rear-seat entertainment panels, HVAC control readouts, and aftermarket infotainment modules. Designers should still validate against automotive temperature and EMC requirements. The 864x480 panel capability easily covers typical 7-inch WVGA automotive panels used for secondary displays.
Empfohlen
Digital Signage and Information Displays
Small-format digital signage - shelf labels, queue displays, building directories - benefits from the SSD1963's combination of vibrant 24-bit color, embedded frame buffer, and parallel host interface that simplifies cable harnesses. The host MCU only needs to push image updates when content changes, leaving the SSD1963 to handle continuous panel refresh independently. The integrated PWM backlight control supports automatic brightness adjustment via ambient light sensors.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für SSD1963 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | SSD1963QL9 | SSD1963G4 |
|---|---|---|---|
| Brand | Solomon Systech | Solomon Systech | Solomon Systech |
| Package | LQFP-128 | LQFP-128 (same) | LQFP-128 (same) |
| Frame Buffer Size | 1215 KB | 1215 KB | 1215 KB |
| Max Panel Resolution | 864 x 480 x 24 bpp | 864 x 480 x 24 bpp | 864 x 480 x 24 bpp |
| Host Interface | 8/9/16/18/24-bit parallel + SPI | 8/9/16/18/24-bit parallel + SPI | 8/9/16/18/24-bit parallel + SPI |
| Hardware BitBLT | Yes (2D engine) | Yes (2D engine) | Yes (2D engine) |
| Backlight PWM | Integrated | Integrated | Integrated |
| Lifecycle Status | Active | Active | Active |
Wichtigste Unterscheidungsmerkmale
- Largest embedded frame buffer in its TFT controller class (vs. RA8875)
- Broader host-interface flexibility than most peers (vs. ILI9488)
- Integrated hardware BitBLT and rotation engine (vs. HX8347)
Designhinweise
Estimated: For the SSD1963 in LQFP-128, route the parallel host bus (DB[15:0] or DB[7:0]) with matched impedance (~50 ohm) and length-matched traces within 50 mil across the byte group. Keep pixel-clock (LCD_PCLK) and synchronous lines (LCD_HSYNC, LCD_VSYNC, LCD_DE) tightly length-matched because the SSD1963 has no skew tolerance - mismatches longer than ~2 cm cause visible RGB color fringing on the panel.
Estimated: Bypass VDD pins with 100 nF ceramic caps placed within 2 mm of each supply pin, plus a single 10 uF tantalum or polymer cap near the package corner. Tie all GND pins to a unified ground plane; split grounds between host and SSD1963 should be avoided because the PLL is sensitive to ground bounce from MCU switching activity.
A frequent integration mistake is leaving the PLL configuration register (0x00E0-0x00E4) at default values; the SSD1963 then powers up without a valid pixel clock and the panel stays blank with no error flag. Always write the PLL settings per the datasheet table for the target crystal (typically 10 MHz) and the desired pixel clock before enabling the LCD output. Similarly, set the soft-reset (0x01) and wait at least 5 ms before issuing display-on (0x29) commands.
Place the 10 MHz crystal (or external clock) within 5 mm of XIN/XOUT, and guard the traces with a ground fence because the PLL is the SSD1963's most noise-sensitive block. Route the backlight PWM output (GPIO tied to BLEN) away from analog host-ADC inputs if the same MCU handles both.
Compliance-Informationen
RoHS compliance per Solomon Systech product page. AEC-Q100 not qualified - SSD1963 is targeted at industrial/consumer, not automotive safety.
