PIC32MZ2048EFM100-E/PT - 200MHz 2MB Flash MCU, 100-TQFP | Microchip
Teilenummer: PIC32MZ2048EFM100-E/PT ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $22.5 | $22,50 |
| 10 | $20.25 | $202,50 |
| 100 | $17.85 | $1.785,00 |
| 500 | $15.92 | $7.960,00 |
| 1.000 | $14.4 | $14.400,00 |
PIC32MZ2048EFM100-E/PT Übersicht
What is a PIC32MZ EF microcontroller? The PIC32MZ EF family is Microchip's high-performance 32-bit MCU line built on the MIPS microAptiv core. These microcontrollers combine a deterministic real-time control architecture with rich connectivity peripherals (USB, Ethernet, CAN, SQI) and an integrated crypto engine, positioning them between classical MCUs and high-end application processors. Within the broader taxonomy: PIC32MZ EF -> PIC32 family -> 32-bit MCU -> microcontroller -> embedded processing IC. The EF variant specifically adds a hardware floating-point unit and DSP extensions (four 64-bit accumulators, single-cycle MAC, saturating and fractional math), giving it strong numeric performance for motor control, audio processing, and graphics workloads.
Key features include 2 MB dual-panel Flash (which supports live firmware update), 512 KB SRAM, a crypto accelerator, a 200 MHz / 330 DMIPS core with FPU, and 78 interrupt vectored I/O pins. Connectivity peripherals span USB 2.0 high-speed, 10/100 Ethernet MAC, CAN 2.0B, six UART/I2C/SPI modules, and a Quad-SPI flash interface. A 12-bit 18 MSPS ADC with up to 40 analog inputs enables precision mixed-signal designs, while the 28-channel PWM and quadrature encoder interface support advanced motor control.
Typical applications include industrial IoT gateways, automotive body and HMI modules (AEC-Q100 qualified variants), graphics HMI panels, Ethernet-connected motor drives, and secure-connected embedded nodes. When designing with this part, ensure the 3.3V core supply is decoupled with low-ESR ceramic capacitors placed within 5 mm of each VDD pin, and follow the package-specific thermal layout to keep junction temperature below 110C at full CPU load.
Drop-in-Alternativen für PIC32MZ2048EFM100-E/PT – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PIC32MZ2048EFM100-E/PT (gleiche Bauform und Footprint) – abweichend in Package, ADC, Ethernet, Core, FPU.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
PIC32MZ1024EFM100-E/PT
✅ Drop-In✓ Auf Lager
$8.7 / Stück
Datenblatt ansehen →PIC32MZ2048EFM100-E/PTVAO
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
PIC32MZ2048EFH100-E/PT
✅ Drop-In✓ Auf Lager
$12.1 / Stück
Datenblatt ansehen →PIC32MZ1024EFK100-E/PT
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$8.12 / Stück
Datenblatt ansehen →PIC32MZ2048ECM100-I/PT
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$9.2 / Stück
Datenblatt ansehen →PIC32MZ2048EFM100-E/PT Grenzwerte & elektrische Eigenschaften
| Core | MIPS32 M-Class (microAptiv) |
| Maximum CPU Speed | 200 MHz |
| Core Mark Performance | 330 DMIPS |
| FPU | IEEE 754 single- and double-precision hardware |
| DSP Extensions | Four 64-bit accumulators, single-cycle MAC, saturating/fractional math |
| Program Flash | 2 MB (dual-panel, live update) |
| SRAM | 512 KB |
| Operating Voltage | 3.3 V (2.0 V - 3.6 V range) |
| Betriebstemperatur | -40C to +125C (E grade, extended) |
| Gehäuse | 100-pin TQFP (12x12 mm) |
| I/O Pins | 78 |
| ADC | 12-bit, 18 MSPS, up to 40 analog inputs |
| Connectivity | USB 2.0 HS, 10/100 Ethernet MAC, CAN 2.0B, 6x UART/I2C/SPI, SQI |
| Crypto Accelerator | Yes (AES, DES, 3DES, SHA, MD5, RNG) |
| PWM Channels | 28 channels |
| Montageart | Surface Mount |
| RoHS-Status | Compliant |
PIC32MZ2048EFM100-E/PT 100-pin tqfp (12x12 mm) Pinbelegungsleitfaden
Pinbelegung für PIC32MZ2048EFM100-E/PT (100-pin tqfp (12x12 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für PIC32MZ2048EFM100-E/PT.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
PIC32MZ2048EFM100-E/PT ist geeignet für 6 Anwendungs: Industrial IoT Gateway, Automotive HMI / Body Control Module, Industrial Motor Control / Servo Drive, Medical Patient Monitoring Device, Graphics HMI / Touch Panel Controller, Secure-Connected Edge Sensor Node.
Industrial IoT Gateway
The PIC32MZ2048EFM100-E/PT is an ideal host MCU for industrial IoT gateways that aggregate sensor data and forward it over Ethernet or cellular uplink. Its 10/100 Ethernet MAC and USB 2.0 High-Speed enable multi-protocol connectivity (Modbus/TCP, EtherNet/IP, MQTT) without external interface ICs, while 2 MB dual-panel Flash supports live OTA firmware updates on deployed nodes. The integrated crypto accelerator accelerates TLS 1.2/1.3 handshakes (AES-256, SHA-256), reducing the time spent in cloud-authentication routines. The 512 KB SRAM holds full TCP/IP stacks plus local data buffers, and the 200 MHz MIPS core with FPU handles JSON/XML parsing for northbound traffic in under 50 ms typical.
Empfohlen
Automotive HMI / Body Control Module
The AEC-Q100 qualified variant (PIC32MZ2048EFM100-E/PTVAO) serves automotive body and HMI modules that drive instrument-cluster graphics, manage body-controller networks, and wake up the vehicle CAN bus. Its 100-pin TQFP (12x12 mm) package offers 78 I/O pins to interface with rotary encoders, segment drivers, and CAN bus transceivers. The hardware FPU accelerates graphical rendering for TFT cluster displays, while the 12-bit 18 MSPS ADC digitizes analog sensor inputs (temperature, position, current) used by the body controller. Extended -40C to +125C operation and AEC-Q100 grade 1 reliability qualify it for under-hood and cabin deployments.
Empfohlen
Industrial Motor Control / Servo Drive
The PIC32MZ2048EFM100-E/PT excels in multi-axis servo drive and AC induction motor control where deterministic PWM timing is critical. Its 28-channel PWM module includes complementary outputs with programmable dead-time insertion and dedicated fault inputs, allowing direct drive of three-phase IGBT/MOSFET bridges. The hardware FPU offloads Park and Clarke transforms, enabling field-oriented control (FOC) of a PMSM at 20 kHz PWM with sub-microsecond loop time. The quadrature encoder interface reads position feedback from incremental encoders, and the 12-bit ADC synchronizes current sampling to the PWM center, achieving sub-1 percent torque ripple in servo applications.
Empfohlen
Medical Patient Monitoring Device
In portable patient-monitoring devices such as multi-parameter bedside monitors, the PIC32MZ2048EFM100-E/PT provides the deterministic real-time response required to acquire ECG, SpO2, and respiration waveforms. The 12-bit 18 MSPS ADC simultaneously samples up to four bioelectric channels at 1 kHz without CPU intervention, leaving the 200 MHz core free to run digital filtering and arrhythmia-detection algorithms. The integrated crypto accelerator secures patient data over Bluetooth or Wi-Fi links to hospital networks, helping devices meet IEC 81001-5-1 cybersecurity requirements. The extended -40C to +125C operating range supports both inpatient and ambulatory deployment scenarios.
Empfohlen
Graphics HMI / Touch Panel Controller
For industrial HMI panels with 4.3 to 7 inch TFT displays, the PIC32MZ2048EFM100-E/PT drives RGB888 or LVDS displays while handling resistive or capacitive touch input. The 2 MB Flash stores full graphical frame assets (icons, fonts, language strings) and the 512 KB SRAM holds the active framebuffer and anti-aliased rendering workspace. The hardware FPU accelerates vector graphics primitives (line, arc, polygon) and BMP/PNG decoding routines. USB 2.0 High-Speed allows quick firmware updates from USB flash drives on the factory floor, and Ethernet connectivity integrates the panel into the broader SCADA network.
Empfohlen
Secure-Connected Edge Sensor Node
The PIC32MZ2048EFM100-E/PT powers secure edge sensor nodes in smart-building and IIoT networks, where each node must authenticate to a cloud backend and run local anomaly detection. The integrated crypto engine performs hardware-accelerated AES, SHA, and RNG operations for TLS 1.3 mutual authentication, enabling secure boot and TLS handshake in under 200 ms. Six UART/I2C/SPI interfaces aggregate data from multiple sensor front-ends (temperature, humidity, motion), while 10/100 Ethernet or Wi-Fi module (over UART) uplinks to the gateway. The 200 MHz MIPS core with FPU runs lightweight ML inference (decision trees, k-NN) for local anomaly detection before forwarding to the cloud.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PIC32MZ2048EFM100-E/PT – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PIC32MZ1024EFM100-E/PT | PIC32MZ2048EFM100-E/PTVAO | PIC32MZ2048EFH100-E/PT | PIC32MZ1024EFK100-E/PT | PIC32MZ2048ECM100-I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-100 (12x12 mm) | TQFP-100 (12x12 mm) | TQFP-100 (12x12 mm) | TQFP-100 (12x12 mm) | TQFP-100 (12x12 mm) | TQFP-100 (12x12 mm) |
| CPU Speed | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Flash | 2 MB | 1 MB | 2 MB | 2 MB | 1 MB | 2 MB |
| SRAM | 512 KB | 512 KB | 512 KB | 512 KB | 256 KB | 512 KB |
| FPU | Yes (IEEE 754 double-precision) | Yes | Yes | Yes | Yes | No |
| Crypto Engine | Yes | Yes | Yes | Yes | No | No |
| Temperature Grade | Extended -40C to +125C | Extended -40C to +125C | AEC-Q100 Grade 1 | Extended -40C to +125C | Extended -40C to +125C | Industrial -40C to +85C |
Wichtigste Unterscheidungsmerkmale
- Dual-panel 2 MB Flash with live update support (vs. PIC32MZ1024EFM100-E/PT)
- AEC-Q100 grade 1 automotive qualified option (vs. PIC32MZ2048ECM100-I/PT)
- Integrated crypto accelerator (vs. PIC32MZ1024EFK100-E/PT)
Designhinweise
Estimated: at full 200 MHz CPU load with both Ethernet and USB active, the PIC32MZ2048EFM100-E/PT draws approximately 80 mA from the 3.3V rail. The device has multiple VDD/VDDPLL/VDDIO pins that must each be decoupled with a 100 nF ceramic capacitor placed within 5 mm of each pin, plus a bulk 4.7 uF tantalum or ceramic at the regulator output. Place the decoupling network on the same PCB layer as the MCU, avoiding vias in the high-current return path.
Estimated: at the maximum operating point (200 MHz, all peripherals active, 3.6V core), the junction temperature rise above ambient is roughly 12-15 C/W in the TQFP-100 package mounted on a 4-layer JEDEC test board. For continuous operation above 1A core current (e.g. sustained DSP workloads), increase the ground-plane copper area beneath the exposed thermal pad and surrounding the package. Designers targeting ambient temperatures above 85C should select the "E" temperature grade (this part) and verify junction temperature with the manufacturer's thermal model.
The PIC32MZ2048EFM100-E/PT integrates an internal regulator that requires external bypass capacitors on both VCAP pin (4.7 uF ceramic) and VDDPLL (10 uF tantalum + 100 nF ceramic). Route the Ethernet RMII/MII traces as a 50-ohm controlled-impedance pair with length matching within 50 mil between clock and data lines. Place the 25 MHz crystal within 5 mm of the OSC1/OSC2 pins, with a grounded guard ring around the crystal traces to minimize EMI coupling to the high-speed USB 2.0 differential pair.
A common pitfall is failing to configure the boot select pins (BMX[2:0]) and trace mode pins before reset release, which can leave the part in an unbootable state. Second, the dual-panel Flash requires specific programming sequences in ICSP mode; attempting to write across panel boundaries without correct panel-switching code will silently fail. Finally, the cryptographic engine requires proper initialization sequence (CML, KEY, CRY) before access, otherwise reads return 0. Always reference the Family Reference Manual (DS60001321) for peripheral drivers.
Compliance-Informationen
RoHS and lead-free compliant per Microchip product page. AEC-Q100 qualified PTVAO variant available. Conflict minerals statement available from Microchip.
