R5F10ALEKFB#X5 - Low-Power Automotive MCU | Renesas
Teilenummer: R5F10ALEKFB#X5 ✓ AktivR5F10ALEKFB#X5 Übersicht
An RL78/F13 microcontroller belongs to the embedded-control hierarchy of 8-bit flash MCUs, where flash memory, SRAM, timers, serial interfaces, and low-power peripherals are integrated on one semiconductor die. These devices are used to control small electromechanical, sensing, and communication subsystems without requiring an external processor or large external memory. Their principal design advantage is efficient execution and sleep-mode current, allowing battery-powered and vehicle electronics to remain responsive while consuming little standby power.
The RL78/F13 family combines flash-based program storage with low-power operating modes and a peripheral set intended for compact embedded systems. Its 16 KB to 128 KB flash range allows designers to match code and firmware storage to the task. Integrated low-power behavior is particularly important in automotive electronics that spend extended periods asleep and must resume quickly. The KFB package provides 48 external connection points, supporting a practical mix of digital I/O and embedded-controller functions while remaining compatible with established LQFP assembly methods.
The 8-bit RL78 architecture is intended for control-oriented rather than high-throughput computing. Firmware can handle input sampling, state machines, actuator commands, communications, and supervisory logic within a compact embedded controller. Low-power operation reduces the energy required during idle intervals, while embedded flash removes an external program-memory device and reduces the component count of a typical automotive control board. The exact clock, RAM, peripheral, voltage, and temperature limits for this ordering code must be confirmed in the manufacturer datasheet before design release.
Typical uses include body electronics, sensor interfaces, actuator controllers, small motor-control subsystems, and automotive accessory modules. The R5F10ALEKFB#X5 is particularly suitable when an automotive MCU is needed for local sensing and control while keeping standby consumption low. It can also serve in industrial or consumer products derived from the same automotive-qualified controller family, provided the full electrical and qualification requirements match the intended environment.
PCB implementation should follow the manufacturer land pattern and pin-assignment table for the 48-pin LQFP KFB package. Confirm the exact oscillator, reset, programming-interface, supply, and I/O connections before routing because suffix changes can affect functions or ordering conditions. Place decoupling capacitors close to the supply pins and preserve the manufacturer’s recommended programming and clock-layout clearances.
This product page combines the manufacturer identification, family-level capabilities, sourcing links, and engineering guidance in one reference format. It also distinguishes directly related ordering variants from true drop-in choices, helping engineers evaluate PCB reuse, firmware compatibility, and automotive suitability without confusing a related part with a verified substitute.
Drop-in-Alternativen für R5F10ALEKFB#X5 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
R5F10ALDKFB#X5
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
R5F10ALEKFB#V5
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →R5F10AGGKFB#X5
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
R5F10AGAKFB#X5
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
R5F10AGEKFB#X5
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →R5F10ALEKFB#X5 Grenzwerte & elektrische Eigenschaften
| Product Type | 8-bit flash microcontroller |
| Series | RL78/F13 |
| Manufacturer | Renesas Electronics |
| Application Segment | Automotive electronics |
| Family Flash Memory Range | 16 KB to 128 KB |
| Family Pin-Count Range | 20 to 80 pins |
| Architecture | 8-bit |
| Gehäuse | 48-pin LQFP (KFB) |
| Montageart | Surface mount |
| Low-Power Feature | Low stand-by current |
R5F10ALEKFB#X5 48-pin lqfp (kfb) Pinbelegungsleitfaden
Pinbelegung für R5F10ALEKFB#X5 (48-pin lqfp (kfb)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für R5F10ALEKFB#X5.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
R5F10ALEKFB#X5 ist geeignet für 6 Anwendungs: Automotive Body Control Modules, Automotive Sensor Interface Nodes, Small Motor and Actuator Control, Battery-Powered Industrial Accessories, Communication Gateway and Protocol Bridge, LED Lighting and Status Control.
Automotive Body Control Modules
The R5F10ALEKFB#X5 fits distributed body-control tasks where a low-power 8-bit MCU must interpret switches and sensors, coordinate lamps or locks, and manage fault states. Its embedded flash simplifies firmware storage, while the RL78/F13 family’s low stand-by current supports modules that remain connected to the vehicle electrical system for extended periods. The 48-pin KFB LQFP provides a conventional surface-mount assembly option with numerous I/O connections. Before schematic release, confirm the exact supply range, active and sleep currents, ADC channels, timers, automotive qualification, and operating-temperature limits in the manufacturer documentation.
Empfohlen
Automotive Sensor Interface Nodes
The R5F10ALEKFB#X5 can serve as a local sensor-hub controller for pressure, temperature, position, or switch inputs requiring acquisition, filtering, diagnostics, and communication to another vehicle ECU. The 8-bit RL78/F13 architecture is appropriate for deterministic control tasks rather than computationally intensive signal processing. Embedded flash supports boot logic, configuration, calibration handling, and diagnostics without an external memory device. Its low stand-by capability is useful when the node spends much of its operating life asleep. Confirm the available ADC performance, comparator resources, serial interfaces, I/O voltage levels, and wake-up timing for the selected ordering code.
Empfohlen
Small Motor and Actuator Control
The R5F10ALEKFB#X5 is suitable for compact actuator controllers where the MCU sequences relays, solenoids, stepper systems, or small motors and applies timing, current limits, and fault handling. RL78/F13 devices are designed around embedded control, combining flash, timers, interrupt-driven peripherals, and low-power operation in one device. This reduces the need for external logic while allowing standby behavior between active events. The appropriate design must account for inductive transients, driver isolation, thermal rise, and the difference between MCU supply and actuator supply. Validate timer resolution, PWM resources, pin multiplexing, and automotive environmental requirements before implementation.
Empfohlen
Battery-Powered Industrial Accessories
For battery-powered industrial accessories, the R5F10ALEKFB#X5 provides an 8-bit control platform with embedded flash and low stand-by current. It can supervise a sensor, operate a local user interface, log operating states, and enter a low-power mode between events. The KFB 48-pin LQFP footprint is useful where board space is sufficient and manufacturing uses conventional leaded-package inspection and assembly. Because the product is positioned for automotive applications, an industrial implementation still needs a documented review of temperature, vibration, EMC, ESD, and qualification expectations. Confirm active current, sleep current, wake-up latency, and supply behavior for the power-budget design.
Empfohlen
Communication Gateway and Protocol Bridge
The R5F10ALEKFB#X5 can be evaluated for a small protocol-conversion or gateway function that handles serial framing, device discovery, state management, and supervisory communication. The embedded flash permits a complete protocol stack and configuration table to reside on-chip, while low-power modes help manage energy in intermittently connected equipment. Peripheral selection and pin multiplexing are decisive because the gateway may require UART, LIN, I2C, or other Renesas-compatible interfaces. Check the exact ordering code against the datasheet interface list, DMA availability, memory capacity, and operating clock. Firmware architecture should also avoid assuming resource equivalence with another RL78/F13 code.
Empfohlen
LED Lighting and Status Control
The R5F10ALEKFB#X5 can control automotive or industrial LED lighting subsystems through timers, outputs, dimming state machines, and fault monitoring. A microcontroller-based approach allows lamp status, brightness commands, thermal conditions, and communication requests to be handled locally. Low stand-by current benefits modules that are inactive most of the time, while embedded flash supports lighting profiles and calibration. The selected KFB pin allocation must provide the required PWM-capable ports, communication pins, and logic levels without conflicts. Confirm timer channels, PWM resolution, maximum port drive, package thermal performance, and any qualification requirements in the manufacturer datasheet before laying out the LED driver.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für R5F10ALEKFB#X5 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | R5F10ALDKFB#X5 | R5F10ALEKFB#V5 | R5F10AGGKFB#X5 | R5F10AGAKFB#X5 | R5F10AGEKFB#X5 |
|---|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 48-pin LQFP (KFB) | 48-pin LQFP (KFB) | 48-pin LQFP (KFB) | 48-pin LQFP (KFB) | 48-pin LQFP (KFB) | 48-pin LQFP (KFB) |
| Microcontroller Series | RL78/F13 | RL78/F13 | RL78/F13 | RL78/F13 | RL78/F13 | RL78/F13 |
| CPU Architecture | 8-bit | 8-bit | 8-bit | 8-bit | 8-bit | 8-bit |
| Low-Power Positioning | Low stand-by current | RL78/F13 low-power family | RL78/F13 low-power family | RL78/F13 low-power family | RL78/F13 low-power family | RL78/F13 low-power family |
Wichtigste Unterscheidungsmerkmale
- Exact ordering-code identity with automotive positioning (vs. R5F10ALEKFB#V5)
- Closest identified same-package resource comparison (vs. R5F10ALDKFB#X5)
- Related family option without changing the KFB land pattern (vs. R5F10AGGKFB#X5)
Designhinweise
Use the manufacturer’s KFB land pattern rather than constructing a generic 48-pin LQFP footprint. Confirm pad dimensions, pin-1 orientation, courtyard limits, solder-mask clearance, and paste volume against the current package drawing. Preserve access to the programming or debug signals and avoid routing fast or sensitive signals beneath the device where they could complicate rework or inspection.
Place every required supply bypass capacitor directly beside the associated device power pins, with the shortest possible ground return. Establish the power budget from the exact active, idle, and sleep currents in the manufacturer datasheet. Because low stand-by current is a key family feature, measure leakage through external pull networks and powered peripherals as well as the microcontroller itself; an external circuit can dominate the final system sleep current.
Do not assume that two RL78/F13 devices with KFB suffixes are firmware-compatible. Compare the device-code table for flash size, SRAM, peripheral inventory, interrupt vectors, clock options, and package pins. A PCB can fit the replacement mechanically while failing because a timer channel, serial function, or memory-mapped resource differs. Revalidate startup, bootloader placement, timing, and production programming after any ordering-code change.
Follow the manufacturer clock-layout guidance and keep oscillator and sensitive timing paths compact. Separate switching nodes, motor-drive returns, and high-current actuator paths from sensor inputs and microcontroller ground references. For mixed-signal modules, use a deliberate ground strategy and place analog input conditioning close to the controller. Review EMC susceptibility and radiated-emissions expectations for the final automotive or industrial enclosure.
Compliance-Informationen
Renesas identifies the device for automotive applications, but the available product information does not state the exact AEC-Q100, RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for this ordering code. Confirm current declarations in the manufacturer product documentation and quality information.