Renesas Electronics

R5F10ALEKFB#X5 - Low-Power Automotive MCU | Renesas

MPN: R5F10ALEKFB#X5 ✓ सक्रिय
48-pin LQFP (KFB) Package 16 KB to 128 KB Memory
न्यूनतम ऑर्डर मात्रा: 1 |

R5F10ALEKFB#X5 अवलोकन

The Renesas Electronics R5F10ALEKFB#X5 is an RL78/F13-series 8-bit microcontroller designed for automotive applications, combining low stand-by current with embedded flash memory in a 48-pin LQFP package. The RL78/F13 family spans 16 KB to 128 KB of flash memory, supports package configurations from 20 to 80 pins, and is positioned as a low-power successor to the 78K0R and R8C microcontroller families. The #X5 ordering suffix identifies the particular automotive-oriented ordering configuration, while KFB denotes the package designation.

An RL78/F13 microcontroller belongs to the embedded-control hierarchy of 8-bit flash MCUs, where flash memory, SRAM, timers, serial interfaces, and low-power peripherals are integrated on one semiconductor die. These devices are used to control small electromechanical, sensing, and communication subsystems without requiring an external processor or large external memory. Their principal design advantage is efficient execution and sleep-mode current, allowing battery-powered and vehicle electronics to remain responsive while consuming little standby power.

The RL78/F13 family combines flash-based program storage with low-power operating modes and a peripheral set intended for compact embedded systems. Its 16 KB to 128 KB flash range allows designers to match code and firmware storage to the task. Integrated low-power behavior is particularly important in automotive electronics that spend extended periods asleep and must resume quickly. The KFB package provides 48 external connection points, supporting a practical mix of digital I/O and embedded-controller functions while remaining compatible with established LQFP assembly methods.

The 8-bit RL78 architecture is intended for control-oriented rather than high-throughput computing. Firmware can handle input sampling, state machines, actuator commands, communications, and supervisory logic within a compact embedded controller. Low-power operation reduces the energy required during idle intervals, while embedded flash removes an external program-memory device and reduces the component count of a typical automotive control board. The exact clock, RAM, peripheral, voltage, and temperature limits for this ordering code must be confirmed in the manufacturer datasheet before design release.

Typical uses include body electronics, sensor interfaces, actuator controllers, small motor-control subsystems, and automotive accessory modules. The R5F10ALEKFB#X5 is particularly suitable when an automotive MCU is needed for local sensing and control while keeping standby consumption low. It can also serve in industrial or consumer products derived from the same automotive-qualified controller family, provided the full electrical and qualification requirements match the intended environment.

PCB implementation should follow the manufacturer land pattern and pin-assignment table for the 48-pin LQFP KFB package. Confirm the exact oscillator, reset, programming-interface, supply, and I/O connections before routing because suffix changes can affect functions or ordering conditions. Place decoupling capacitors close to the supply pins and preserve the manufacturer’s recommended programming and clock-layout clearances.

This product page combines the manufacturer identification, family-level capabilities, sourcing links, and engineering guidance in one reference format. It also distinguishes directly related ordering variants from true drop-in choices, helping engineers evaluate PCB reuse, firmware compatibility, and automotive suitability without confusing a related part with a verified substitute.

के लिए ड्रॉप-इन विकल्प R5F10ALEKFB#X5 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

R5F10ALDKFB#X5

✅ ड्रॉप-इन
📦 48-pin LQFP (KFB)
Same 48-pin KFB footprint and RL78/F13 family; the D-versus-E device code changes key resources by an amount that requires datasheet confirmation.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

R5F10ALEKFB#V5

✅ ड्रॉप-इन
Renesas Electronics
📦 48-pin LQFP (KFB)
16-bit embedded microcontroller · RL78/F13 · Renesas Electronics · LFQFP · Obsolete · 16-bit RL78 · 16 KB to 128 KB · 20 to 80 pins

कीमत के लिए संपर्क करें

डेटाशीट देखें →

R5F10AGGKFB#X5

✅ ड्रॉप-इन
📦 48-pin LQFP (KFB)
Same 48-pin KFB footprint and RL78/F13 family; the G-versus-E device code changes key resources by an amount that requires datasheet confirmation.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

R5F10AGAKFB#X5

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 48-pin LQFP (KFB)
Same 48-pin KFB footprint within the RL78/F13 family; the A-versus-E code difference changes device resources by an amount that requires datasheet confirmation.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

R5F10AGEKFB#X5

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
Renesas Electronics
📦 48-pin LQFP (KFB)
16-bit automotive microcontroller · RL78/F13 · 16-bit · 48 · 48-pin LFQFP · Square · Surface mount · CAN and LIN

कीमत के लिए संपर्क करें

डेटाशीट देखें →

R5F10ALEKFB#X5 Maximum Ratings और Electrical Characteristics

Product Type 8-bit flash microcontroller
Series RL78/F13
Manufacturer Renesas Electronics
Application Segment Automotive electronics
Family Flash Memory Range 16 KB to 128 KB
Family Pin-Count Range 20 to 80 pins
Architecture 8-bit
पैकेज 48-pin LQFP (KFB)
माउंटिंग प्रकार Surface mount
Low-Power Feature Low stand-by current

R5F10ALEKFB#X5 48-pin lqfp (kfb) पिन कॉन्फ़िगरेशन गाइड

R5F10ALEKFB#X5 (48-pin lqfp (kfb) पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

R5F10ALEKFB#X5 के लिए 48-pin lqfp (kfb) पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: R5F10ALEKFB#X5.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

R5F10ALEKFB#X5 के लिए उपयुक्त है 6 अनुप्रयोगs: Automotive Body Control Modules, Automotive Sensor Interface Nodes, Small Motor and Actuator Control, Battery-Powered Industrial Accessories, Communication Gateway and Protocol Bridge, LED Lighting and Status Control.

🚗

Automotive Body Control Modules

The R5F10ALEKFB#X5 fits distributed body-control tasks where a low-power 8-bit MCU must interpret switches and sensors, coordinate lamps or locks, and manage fault states. Its embedded flash simplifies firmware storage, while the RL78/F13 family’s low stand-by current supports modules that remain connected to the vehicle electrical system for extended periods. The 48-pin KFB LQFP provides a conventional surface-mount assembly option with numerous I/O connections. Before schematic release, confirm the exact supply range, active and sleep currents, ADC channels, timers, automotive qualification, and operating-temperature limits in the manufacturer documentation.

🧩

Automotive Sensor Interface Nodes

The R5F10ALEKFB#X5 can serve as a local sensor-hub controller for pressure, temperature, position, or switch inputs requiring acquisition, filtering, diagnostics, and communication to another vehicle ECU. The 8-bit RL78/F13 architecture is appropriate for deterministic control tasks rather than computationally intensive signal processing. Embedded flash supports boot logic, configuration, calibration handling, and diagnostics without an external memory device. Its low stand-by capability is useful when the node spends much of its operating life asleep. Confirm the available ADC performance, comparator resources, serial interfaces, I/O voltage levels, and wake-up timing for the selected ordering code.

🔧

Small Motor and Actuator Control

The R5F10ALEKFB#X5 is suitable for compact actuator controllers where the MCU sequences relays, solenoids, stepper systems, or small motors and applies timing, current limits, and fault handling. RL78/F13 devices are designed around embedded control, combining flash, timers, interrupt-driven peripherals, and low-power operation in one device. This reduces the need for external logic while allowing standby behavior between active events. The appropriate design must account for inductive transients, driver isolation, thermal rise, and the difference between MCU supply and actuator supply. Validate timer resolution, PWM resources, pin multiplexing, and automotive environmental requirements before implementation.

🏭

Battery-Powered Industrial Accessories

For battery-powered industrial accessories, the R5F10ALEKFB#X5 provides an 8-bit control platform with embedded flash and low stand-by current. It can supervise a sensor, operate a local user interface, log operating states, and enter a low-power mode between events. The KFB 48-pin LQFP footprint is useful where board space is sufficient and manufacturing uses conventional leaded-package inspection and assembly. Because the product is positioned for automotive applications, an industrial implementation still needs a documented review of temperature, vibration, EMC, ESD, and qualification expectations. Confirm active current, sleep current, wake-up latency, and supply behavior for the power-budget design.

🌐

Communication Gateway and Protocol Bridge

The R5F10ALEKFB#X5 can be evaluated for a small protocol-conversion or gateway function that handles serial framing, device discovery, state management, and supervisory communication. The embedded flash permits a complete protocol stack and configuration table to reside on-chip, while low-power modes help manage energy in intermittently connected equipment. Peripheral selection and pin multiplexing are decisive because the gateway may require UART, LIN, I2C, or other Renesas-compatible interfaces. Check the exact ordering code against the datasheet interface list, DMA availability, memory capacity, and operating clock. Firmware architecture should also avoid assuming resource equivalence with another RL78/F13 code.

💡

LED Lighting and Status Control

The R5F10ALEKFB#X5 can control automotive or industrial LED lighting subsystems through timers, outputs, dimming state machines, and fault monitoring. A microcontroller-based approach allows lamp status, brightness commands, thermal conditions, and communication requests to be handled locally. Low stand-by current benefits modules that are inactive most of the time, while embedded flash supports lighting profiles and calibration. The selected KFB pin allocation must provide the required PWM-capable ports, communication pins, and logic levels without conflicts. Confirm timer channels, PWM resolution, maximum port drive, package thermal performance, and any qualification requirements in the manufacturer datasheet before laying out the LED driver.

अनुशंसित उत्पादों का सारांश

R5F10ALDKFB#X5 Same-package RL78/F13 family candidate for footprint evaluation उपयोग में: Automotive Body Control Modules, Automotive Sensor Interface Nodes, Small Motor and Actuator Control, Communication Gateway and Protocol Bridge R5F10ALEKFB#V5 Same base device and KFB package ordering variant उपयोग में: Automotive Body Control Modules, Small Motor and Actuator Control, LED Lighting and Status Control R5F10AGGKFB#X5 Related RL78/F13 KFB configuration for resource comparison उपयोग में: Automotive Sensor Interface Nodes, Communication Gateway and Protocol Bridge R5F10AGEKFB#X5 Same-package RL78/F13 configuration for low-power control evaluation उपयोग में: Battery-Powered Industrial Accessories R5F10AGAKFB#X5 Related KFB family device for resource selection उपयोग में: Battery-Powered Industrial Accessories, LED Lighting and Status Control
What is the Renesas R5F10ALEKFB#X5?
The Renesas R5F10ALEKFB#X5 is an RL78/F13-series 8-bit flash microcontroller for automotive electronics. According to the Renesas product page, it belongs to a family available from 20 to 80 pins with 16 KB to 128 KB of flash memory. The exact flash and SRAM configuration of this ordering code should be confirmed in the manufacturer datasheet, while the KFB suffix identifies the 48-pin LQFP package.
What are the key specifications of R5F10ALEKFB#X5 that engineers should know?
The R5F10ALEKFB#X5 combines an 8-bit RL78/F13 architecture, low stand-by current, embedded flash programming, automotive positioning, and a 48-pin LQFP KFB package. The broader RL78/F13 family offers configurations from 16 KB to 128 KB of flash and 20 to 80 pins. According to Renesas, the family targets low power consumption and succeeds the earlier 78K0R and R8C controller generations.
Where can I download the R5F10ALEKFB#X5 datasheet PDF?
The official R5F10ALEKFB#X5 documentation begins with the Renesas product-detail page for the RL78/F13 device. Use the datasheet and technical-information links on that page to obtain the current manufacturer PDF, including the KFB pin assignment, electrical characteristics, memory map, peripheral descriptions, and package drawings. The separate historical RL78/F13 datasheet result can also be consulted for family-level information, but the ordering code must be checked against the current datasheet.
Where can I find the R5F10ALEKFB#X5 pinout?
The R5F10ALEKFB#X5 pinout is found in the pin-description table and package drawing in the manufacturer documentation for the 48-pin LQFP KFB package. Use that table to identify supply, ground, reset, clock, programming, and port connections before assigning PCB nets. Do not substitute a generic 48-pin LQFN drawing, because a QFN package requires a different land pattern and exposed-pad treatment.
Is the R5F10ALEKFB#X5 suitable for automotive applications?
The R5F10ALEKFB#X5 is listed by Renesas as a microcontroller for automotive applications, making it the appropriate family choice for vehicle body, sensor, actuator, and accessory-control designs. The exact AEC-Q100 qualification status, temperature range, and automotive-grade test details for this ordering code must be confirmed in its current datasheet before production release.
How does the R5F10ALEKFB#X5 differ from R5F10ALEKFB#V5?
R5F10ALEKFB#V5 is the closest listed ordering variant because it retains the R5F10ALEKFB base number and KFB package designation. The #V5 and #X5 suffixes can represent different packing or delivery conditions, but the exact commercial distinction must be taken from the Renesas ordering table. Treat the two as related ordering configurations rather than assuming firmware, temperature-grade, or qualification equivalence without that confirmation.
Can R5F10ALDKFB#X5 replace R5F10ALEKFB#X5?
R5F10ALDKFB#X5 uses the same RL78/F13 family and KFB package designation as R5F10ALEKFB#X5, making it the most relevant related candidate for PCB-footprint evaluation. However, the differing code character can change flash size, RAM, timer, analog, or ordering characteristics. Compare the exact device-code table and pin functions in the manufacturer datasheet before treating it as a drop-in substitution.
What is the best drop-in replacement for R5F10ALEKFB#X5?
No alternative can be confirmed as a universal drop-in replacement from the available ordering records alone. R5F10ALDKFB#X5 is the closest same-package candidate, while R5F10ALEKFB#V5 retains the same base device code, but each requires confirmation of flash, SRAM, peripheral, temperature, qualification, and packing details. Request the current Renesas device comparison or submit an engineering sample request for evaluation.
What can replace R5F10ALEKFB#X5 on the same PCB?
The strongest same-footprint candidate to evaluate is R5F10ALDKFB#X5 because both identifiers include the 48-pin KFB package designation and belong to the RL78/F13 platform. Pin compatibility alone is insufficient for a replacement decision: firmware, memory-map assumptions, peripheral availability, electrical limits, and automotive qualification must also match. Do not approve a board change without a manufacturer-code comparison and hardware validation.
When should I choose R5F10ALEKFB#X5 over R5F10ALDKFB#X5?
Choose R5F10ALEKFB#X5 when the system was designed specifically around its complete ordering code and firmware baseline; choose R5F10ALDKFB#X5 only when its code definition confirms matching memory, peripherals, electrical limits, and qualification. Because both use the KFB package designation, PCB reuse is plausible, but functional equivalence is not automatically established by package matching.
Is R5F10ALEKFB#X5 suitable for low-power sensor and actuator modules?
The R5F10ALEKFB#X5 is suitable for low-power sensor and actuator modules because RL78/F13 controllers are positioned around low stand-by consumption and integrated flash. That architecture supports local state-machine control, digital I/O, and low-speed peripheral functions without external program memory. Validate the exact sleep-mode current, wake-up time, operating voltage, and pin availability for the final 48-pin implementation.
What is the lead time for R5F10ALEKFB#X5?
Current production lead time for R5F10ALEKFB#X5 is not stated in the product documentation. Use the Request a Quote form on this page to request current lead time, minimum order quantity, and package-delivery options. Because this is an automotive-oriented ordering code, request documentation covering lot traceability, qualification, and delivery condition with the commercial response.
Is R5F10ALEKFB#X5 in stock?
Stock status for R5F10ALEKFB#X5 changes with demand, packaging, and regional supply, so it should be confirmed through the Request a Quote form on this page. The Renesas product page identifies the part as orderable, but orderability alone does not guarantee immediate inventory. Include your required quantity, target date, and acceptable delivery condition when requesting availability.
What is the price of R5F10ALEKFB#X5?
Use the Request a Quote form on this page for a current quotation for R5F10ALEKFB#X5, including the exact KFB package and #X5 ordering suffix. Quote requests should specify quantity, shipment destination, and whether reel, tray, or other authorized delivery conditions are required. This avoids reliance on stale market listings for an automotive microcontroller ordering code.
Is R5F10ALEKFB#X5 the same as R5F10AGGKFB#X5?
No, R5F10ALEKFB#X5 and R5F10AGGKFB#X5 are distinct RL78/F13 ordering codes even though both use KFB packaging. The E-versus-G code positions them in different device configurations, potentially affecting flash, SRAM, timers, and peripheral resources. Use the Renesas device-code table to establish the exact parameter differences and do not reuse existing firmware or PCB routing without a complete compatibility review.

के लिए इंजीनियरिंग संदर्भ डेटा R5F10ALEKFB#X5 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose R5F10ALEKFB#X5 when the product has been designed around the exact automotive RL78/F13 ordering code, including its specific memory map, peripherals, temperature requirements, and documentation baseline. R5F10ALEKFB#V5 is the closest ordering alternative because it retains the same base device and KFB package, but verify whether the suffix changes delivery conditions or any commercial qualification. R5F10ALDKFB#X5 is a useful same-footprint candidate when memory, timers, serial interfaces, or analog resources need to be re-evaluated. R5F10AGGKFB#X5, R5F10AGAKFB#X5, and R5F10AGEKFB#X5 may share the mechanical format, but their device codes require a full parameter comparison. In every case, treat package equivalence as the starting point rather than proof of drop-in compatibility: verify pin multiplexing, firmware layout, clock settings, electrical limits, qualification, and production programming before releasing a substitution.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद R5F10ALDKFB#X5 R5F10ALEKFB#V5 R5F10AGGKFB#X5 R5F10AGAKFB#X5 R5F10AGEKFB#X5
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics
Package 48-pin LQFP (KFB) 48-pin LQFP (KFB) 48-pin LQFP (KFB) 48-pin LQFP (KFB) 48-pin LQFP (KFB) 48-pin LQFP (KFB)
Microcontroller Series RL78/F13 RL78/F13 RL78/F13 RL78/F13 RL78/F13 RL78/F13
CPU Architecture 8-bit 8-bit 8-bit 8-bit 8-bit 8-bit
Low-Power Positioning Low stand-by current RL78/F13 low-power family RL78/F13 low-power family RL78/F13 low-power family RL78/F13 low-power family RL78/F13 low-power family

मुख्य विशेषताएँ

  • Exact ordering-code identity with automotive positioning (बनामR5F10ALEKFB#V5)
  • Closest identified same-package resource comparison (बनामR5F10ALDKFB#X5)
  • Related family option without changing the KFB land pattern (बनामR5F10AGGKFB#X5)

डिज़ाइन नोट्स

Use the manufacturer’s KFB land pattern rather than constructing a generic 48-pin LQFP footprint. Confirm pad dimensions, pin-1 orientation, courtyard limits, solder-mask clearance, and paste volume against the current package drawing. Preserve access to the programming or debug signals and avoid routing fast or sensitive signals beneath the device where they could complicate rework or inspection.

Place every required supply bypass capacitor directly beside the associated device power pins, with the shortest possible ground return. Establish the power budget from the exact active, idle, and sleep currents in the manufacturer datasheet. Because low stand-by current is a key family feature, measure leakage through external pull networks and powered peripherals as well as the microcontroller itself; an external circuit can dominate the final system sleep current.

Do not assume that two RL78/F13 devices with KFB suffixes are firmware-compatible. Compare the device-code table for flash size, SRAM, peripheral inventory, interrupt vectors, clock options, and package pins. A PCB can fit the replacement mechanically while failing because a timer channel, serial function, or memory-mapped resource differs. Revalidate startup, bootloader placement, timing, and production programming after any ordering-code change.

Follow the manufacturer clock-layout guidance and keep oscillator and sensitive timing paths compact. Separate switching nodes, motor-drive returns, and high-current actuator paths from sensor inputs and microcontroller ground references. For mixed-signal modules, use a deliberate ground strategy and place analog input conditioning close to the controller. Review EMC susceptibility and radiated-emissions expectations for the final automotive or industrial enclosure.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

Renesas identifies the device for automotive applications, but the available product information does not state the exact AEC-Q100, RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for this ordering code. Confirm current declarations in the manufacturer product documentation and quality information.

डेटा सत्यापन तिथि: 2026-11-16 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

R5F10ALEKFB#X5 datasheet R5F10ALEKFB#X5 pinout R5F10ALEKFB#X5 datasheet pdf R5F10ALEKFB#X5 specifications R5F10ALEKFB#X5 price R5F10ALEKFB#X5 stock R5F10ALEKFB#X5 equivalent R5F10ALEKFB#X5 replacement R5F10ALEKFB#X5 footprint Renesas R5F10ALEKFB#X5 R5F10ALEKFB#X5 vs R5F10ALDKFB#X5 R5F10ALEKFB#X5 automotive microcontroller

संबंधित कंपोनेंट्स और शब्द

Renesas Electronics R5F10ALEKFB#X5 R5F10ALE RL78/F13 8-bit microcontroller flash microcontroller embedded microcontroller microcontroller IC semiconductor embedded flash memory SRAM low-power control low stand-by current automotive electronics body control module sensor interface actuator control protocol bridge LED lighting control industrial control 48-pin LQFP KFB package LQFP family surface mount SMD packaging
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें