Skyworks Solutions

SI2493-C-GT - 56 kbps V.92 Modem IC | 24-TSSOP

Teilenummer: SI2493-C-GT ✓ Aktiv
24-TSSOP Package
MOQ: 1 |

SI2493-C-GT Übersicht

The Skyworks Solutions SI2493-C-GT is a 56 kbps V.92 system-side ISOmodem integrated circuit designed for data transmission over analog telephone lines. It supports V.21, V.22, V.23, V.29, V.32, V.34, V.90, V.92, Bell 103, and Bell 212A data formats, giving it broad compatibility with legacy fax, modem, and remote-communications equipment. The device is packaged in a 24-pin TSSOP measuring approximately 4.40 mm wide and is supplied in a tube.

An ISOmodem is a single-chip implementation of the International Telecommunications Union modem recommendations used to move data across the Plain Old Telephone Service network. This integration combines modem signal processing, line-interface functions, and data-control logic in one device, reducing the component count and board area needed for a complete analog-line data modem. The 56 kbps V.92 operating mode places the SI2493-C-GT in the class of devices used for high-speed analog access, remote diagnostics, and legacy data-collection equipment.

The principal feature is its multi-standard protocol support within one package. V.21 through V.34 cover lower-rate asynchronous and synchronous modes, while V.90, V.92, Bell 103, and Bell 212A address widely deployed analog modem standards. This range allows a single board design to interoperate with equipment using different fallback rates and modulation formats. The 56 kbps V.92 data rate is the headline operating specification used to classify the part in distributor catalogs.

The 24-TSSOP package is intended for surface-mount assembly and provides a compact solution for equipment where analog telephone-line connectivity must coexist with digital control logic. Its narrow TSSOP body supports automated PCB assembly, while a tube package matches prototype and moderate-volume production workflows. Board-level implementation still requires external line-interface components, isolation or protection appropriate to the target interface, bypass capacitors, and a controller able to service the modem registers.

For system designers, the SI2493-C-GT is most relevant when maintaining a legacy modem endpoint, building remote monitoring equipment, or supporting copper-line data transmission where endpoint compatibility matters more than modern broadband connectivity. A careful interface review should confirm line-rate requirements, supported modulation modes, host-bus expectations, and the external analog network requirements before the PCB is released.

This page consolidates the verified catalog information for the SI2493-C-GT, places its protocol capabilities in engineering context, and distinguishes verified facts from parameters that must be confirmed in the manufacturer datasheet before layout or firmware development.

Drop-in-Alternativen für SI2493-C-GT – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit SI2493-C-GT (gleiche Bauform und Footprint) – abweichend in Maximum Data Rate, Device Type, Package, Package Length.

Skyworks Solutions
Device Type: System-side ISOmodem network controller and processor IC
Package Length: 0.173 in
Vergleichen mit SI2493-C-GT →
Skyworks Solutions
Maximum Data Rate: 56,000 bps
Device Type: V.92 ISOmodem system-side modem controller
Package: 24-TSSOP (0.173 in, 4.40 mm width)
Vergleichen mit SI2493-C-GT →

SI2493-D-GT

✅ Drop-In
Skyworks Solutions
📦 24-TSSOP
V.92 ISOmodem system-side modem controller · 56,000 bps · Full-duplex over the Public Switched Telephone Network · V.21, V.22, V.23, V.29, V.32, V.34, V.90 and V.92 · Bell 103 and Bell 212A · V.42, V.42bis and V.44 · Automatic rate negotiation · MNP2-5

Preis auf Anfrage

Datenblatt ansehen →

SI2493-C-FT

✅ Drop-In
Skyworks Solutions
📦 24-TSSOP
System-side ISOmodem network controller and processor IC · 56 kbps · V.21, V.22, V.23, V.29, V.32, V.34, V.90, V.92 · Bell 103, Bell 212A · 24-TSSOP · 4.40 mm · 0.173 in · Surface mount

Preis auf Anfrage

Datenblatt ansehen →

SI2493-C-GT Technische Daten

Product Type V.92 ISOmodem system-side IC
Maximum Data Rate 56 kbps
Supported Data Formats V.21, V.22, V.23, V.29, V.32, V.34, V.90, V.92
Bell Compatibility Bell 103, Bell 212A
Gehäuse 24-TSSOP
Package Width 4.40 mm
Package Length 0.173 inch
Packaging Tube
Montageart Surface mount
Maximum Modem Data Rate 56 kbps
Manufacturer Skyworks Solutions Inc.

SI2493-C-GT 0.173 inch Pinbelegungsleitfaden

Pinbelegung für SI2493-C-GT (0.173 inch-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für SI2493-C-GT im 0.173 inch-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für SI2493-C-GT.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

SI2493-C-GT ist geeignet für 6 Anwendungs: Legacy Analog Telephone-Line Data Links, Remote Monitoring and Telemetry, Industrial Equipment Service Interfaces, Fax and Legacy Communications Equipment, Data-Collection and Payment Terminals, Legacy Endpoint Maintenance.

🌐

Legacy Analog Telephone-Line Data Links

The SI2493-C-GT fits equipment that must exchange data over an existing analog telephone network rather than an Ethernet or broadband connection. Its 56 kbps V.92 mode provides the highest listed operating rate, while V.21, V.22, V.23, V.29, V.32, V.34, V.90, Bell 103, and Bell 212A support enables negotiation with a wide range of installed modem endpoints. The 24-TSSOP package keeps the controller footprint compact. Integration still requires the application-specific external line network, isolation, protection, and signal-conditioning components specified in the manufacturer interface guidance.

🧩

Remote Monitoring and Telemetry

The SI2493-C-GT can serve as the communications engine in remote monitoring equipment that reaches endpoints through copper telephone wiring. A 56 kbps V.92 path is suitable for collecting operational measurements, configuration files, and diagnostic records, while the older supported standards improve the chance of connecting to older remote equipment. The 24-pin TSSOP allows the modem circuitry to be placed beside a control processor, but engineers must budget board area for the external line interface and should verify real-world line noise, attenuation, and answer tones during integration testing.

🏭

Industrial Equipment Service Interfaces

Industrial machinery and field-service equipment can use the SI2493-C-GT to provide a dedicated analog-line service connection for diagnostics, firmware retrieval, or configuration exchange. Its multi-standard support is valuable when technicians connect through different central-office or customer-premises modem configurations. The 56 kbps V.92 capability shortens transfer times compared with lower-rate fallback modes, while the broad Bell and V-series list supports mixed equipment fleets. The design must include surge protection appropriate to the exposed line, and functional safety or regulatory requirements should be assessed separately for each installation environment.

📠

Fax and Legacy Communications Equipment

The SI2493-C-GT is relevant to fax, terminal, and legacy communications products that must interoperate with established analog modem standards. Supporting V.21 through V.34 alongside V.90, V.92, Bell 103, and Bell 212A allows one communications engine to cover several historical connection modes. This reduces the need for separate devices when equipment must connect to old and newer remote endpoints. Engineers should verify the precise modulation, framing, and control behavior required by the target equipment in the manufacturer datasheet, particularly for V.34 and V.92 operation.

💳

Data-Collection and Payment Terminals

Data-collection terminals and payment-oriented appliances that depend on copper-line connectivity can use the SI2493-C-GT as a compact system-side ISOmodem. The 56 kbps V.92 rate supports higher-volume transaction or record transfers, and the lower supported standards provide interoperability with conventional remote access equipment. Its 24-TSSOP package is straightforward to place beside a digital controller on a densely populated PCB. Because these systems frequently connect to external analog lines, designers should implement the required isolation and surge protection and verify end-to-end communication against representative providers.

🔧

Legacy Endpoint Maintenance

The SI2493-C-GT is well suited to maintenance platforms intended to service retired or long-lived equipment that retains analog modem interfaces. Its combination of V.92 performance with V.21-to-V.34 and Bell compatibility enables one board to reach endpoints configured for different historical standards. The tube-packaged 24-TSSOP is practical for prototype builds and controlled production runs. Maintenance products should also test connection establishment against representative equipment, review line-state handling, and confirm whether the customer environment requires any additional isolation or surge-protection provisions.

What is the SI2493-C-GT?
The SI2493-C-GT is a 56 kbps V.92 system-side ISOmodem IC for data transmission over analog telephone lines. Skyworks Solutions lists it in a 24-TSSOP package, and distributor records identify support for V.21, V.22, V.23, V.29, V.32, V.34, V.90, V.92, Bell 103, and Bell 212A formats. It is intended for legacy modem, remote-access, and data-collection equipment that must interoperate with copper telephone-line systems.
What data rate does the SI2493-C-GT support?
The SI2493-C-GT supports a maximum V.92 data rate of 56 kbps. Distributor product listings describe the component as a 56 kbps V.92 ISOmodem system-side device, while its protocol set also includes V.21, V.22, V.23, V.29, V.32, V.34, V.90, Bell 103, and Bell 212A. The lower-rate standards provide interoperability and fallback modes for mixed analog-line environments.
Where can I download the SI2493-C-GT datasheet?
The manufacturer datasheet and product documents can be reached through the official product listing at DigiKey, with the manufacturer documentation linked from the SI2493-C-GT product page. The catalog confirms the 24-TSSOP package, tube packaging, and supported V.21 through V.92 and Bell formats. Before finalizing a PCB, use the datasheet linked by that listing to verify pin assignments, electrical limits, and interface timing.
Where can I find the SI2493-C-GT pinout?
The SI2493-C-GT pinout is published in the manufacturer datasheet rather than in the distributor summary text. The verified catalog identifies the component as a 24-pin TSSOP, so the symbol and footprint should use the 24-pin TSSOP library and be checked against the datasheet pin-description table. Do not assign nets from package dimensions alone; confirm analog, digital, power, ground, and no-connect positions before layout release.
Is the SI2493-C-GT a V.92 modem IC?
Yes, the SI2493-C-GT is a V.92 ISOmodem IC rated at 56 kbps. It also supports earlier V-series modes plus Bell 103 and Bell 212A, making it useful where equipment must communicate with endpoints operating under different analog modem standards. Its 24-TSSOP surface-mount package is suitable for compact controller boards and automated assembly processes.
What protocols does the SI2493-C-GT support?
The SI2493-C-GT supports V.21, V.22, V.23, V.29, V.32, V.34, V.90, V.92, Bell 103, and Bell 212A data formats according to distributor specifications. This combination covers multiple legacy analog-line modulation standards in one IC. The supported V.92 mode reaches 56 kbps, while the additional modes allow connection negotiation and interoperability with a broader installed base of modem equipment.
What package does the SI2493-C-GT use?
The SI2493-C-GT uses a 24-pin TSSOP package measuring approximately 4.40 mm wide and 0.173 inch long. It is a surface-mount component supplied in a tube for prototype and moderate-volume production. The package is compatible with automated pick-and-place assembly, but land patterns and exposed thermal or connectivity requirements must be verified against the manufacturer package drawing.
What can replace the SI2493-C-GT?
The closest documented replacement is the SI2493-D-GT, which appears as a direct substitute for the SI2493-C-GT and retains the same 24-TSSOP format and listed modem standards. Another related option is the SI2493-C-FT, identified in a direct specification comparison. Firmware configuration, electrical limits, interface behavior, and PCB compatibility should be reviewed before either part is approved as a production substitute.
Can SI2493-D-GT replace SI2493-C-GT?
Yes, the SI2493-D-GT is identified as a direct substitute for the SI2493-C-GT in distributor cross-reference data. Both are 24-TSSOP devices listed with V.21, V.22, V.23, V.29, V.32, V.34, V.90, V.92, Bell 103, and Bell 212A support. Confirm the manufacturer datasheet, firmware behavior, interface timing, and application qualification requirements before treating the substitution as production-approved.
When should I choose SI2493-C-GT instead of SI2493-D-GT?
Choose the SI2493-C-GT when an existing qualified design specifically uses the C revision or when its documented configuration has already passed the required system verification. The SI2493-D-GT is a strong drop-in candidate because it is listed as a direct substitute in the same 24-TSSOP package, but revision-specific firmware, electrical, and behavioral differences should be checked in the manufacturer documentation before changing an approved BOM.
Is the SI2493-C-GT suitable for analog remote monitoring?
The SI2493-C-GT is suitable for analog remote-monitoring systems that must operate over copper telephone lines and interoperate with legacy modem equipment. Its 56 kbps V.92 mode provides the primary high-rate path, while V.21 through V.34 and Bell modes provide fallback compatibility. The design must also include a suitable external line interface and protection arrangement.
Where can I buy the SI2493-C-GT?
Use the Request a Quote form on this page to request current pricing, stock, minimum order quantity, and lead time for the SI2493-C-GT. The manufacturer lists the part in a 24-TSSOP tube package, and distributor listings confirm the exact ordering code. A purchase order should be released only after the commercial response and manufacturer documentation have been reviewed.
What is the price of the SI2493-C-GT?
Current pricing for the SI2493-C-GT is shown through the Request a Quote form on this page, and the same form is the appropriate route for stock and lead-time confirmation. Distributor and comparison listings are available for the exact MPN, but quote-based sourcing avoids stale price information and confirms quantity breaks for the required tube packaging and production schedule.
What is the lead time for the SI2493-C-GT?
The current lead time should be requested through the Request a Quote form on this page, together with the required order quantity. Lead time can vary with manufacturer inventory, tube packaging, and production volume, so confirm the manufacturing source and delivery schedule at the time of quotation. Confirming the date code and traceability requirements before shipment helps prevent surprises during production ramp.
What are the key specifications of SI2493-C-GT that engineers should know?
The key SI2493-C-GT specifications are a 56 kbps V.92 data rate, support for V.21 through V.34, V.90 and V.92, Bell 103 and Bell 212A, and a 24-TSSOP surface-mount package supplied in a tube. The device is a system-side ISOmodem intended for analog copper-line data links. Its broad standards support is the principal differentiator for interoperable legacy modem designs.
What is the best equivalent for SI2493-C-GT from another manufacturer?
No verified cross-manufacturer drop-in equivalent is documented for the SI2493-C-GT. The identified direct substitute, SI2493-D-GT, is from the same manufacturer and uses the same 24-TSSOP format, so it is the preferred replacement candidate. A different manufacturer's device may offer similar modem functions, but without verified pin, electrical, protocol, and firmware compatibility it should not be treated as a drop-in replacement.
Does the SI2493-C-GT operate in industrial or automotive systems?
The SI2493-C-GT is primarily positioned as a legacy analog-line ISOmodem for communications and data-collection equipment. The distributor records do not identify an automotive qualification, so an AEC-Q100 grade should not be assumed. For industrial or automotive deployment, request the manufacturer specification for operating-temperature limits, quality-grade information, and any qualification documentation relevant to the end application.

Technische Referenzdaten für SI2493-C-GT – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the SI2493-C-GT for a new or maintained analog copper-line modem design that requires 56 kbps V.92 operation together with V.21-to-V.34, V.90, Bell 103, and Bell 212A compatibility. Choose the SI2493-D-GT when an existing qualified SI2493-C-GT design needs supply-chain continuity, because distributor cross-reference data identifies it as a direct substitute in the same 24-TSSOP package. Review the SI2493-C-FT when supply constraints make the FT variant attractive, but compare its documented voltage range, power consumption, and package details against the C-GT requirements before release. No verified cross-manufacturer drop-in part is identified, so a competitor device should not be treated as pin-compatible without manufacturer-level electrical, protocol, firmware, and footprint verification.

Vergleich mit Alternativen

Parameter Dieses Produkt SI2493-D-GT SI2493-C-FT
Manufacturer Skyworks Solutions Skyworks Solutions Skyworks Solutions
Package 24-TSSOP 24-TSSOP 24-TSSOP
Component Type V.92 ISOmodem system-side IC V.92 ISOmodem system-side IC Related SI2493-C family modem variant

Wichtigste Unterscheidungsmerkmale

  • Broad legacy-standard coverage in one modem IC (vs. SI2493-D-GT)
  • Documented direct-substitute relationship (vs. SI2493-D-GT)
  • Same-family configuration comparison (vs. SI2493-C-FT)

Designhinweise

Do not treat the 24-TSSOP body size as sufficient evidence for a drop-in replacement. Confirm every electrical and logical function against the pin-description table, especially analog line connections, supply pins, grounds, and interface timing. The SI2493-D-GT is listed as a direct substitute, while the SI2493-C-FT comparison explicitly involves voltage range, power consumption, and package characteristics; validate the exact variant against the schematic before procurement release.

Separate the modem's analog line-network section from sensitive digital and clock routing. Use the manufacturer reference layout for the external line components, keep the protected copper and surge path away from controller signals, and follow the package drawing for thermal-pad or exposed-connection requirements. Confirm whether the selected 24-TSSOP variant uses an exposed pad because that determines the required land pattern and assembly process.

Test line acquisition and fallback behavior using representative telephone networks rather than only a local bench termination. The SI2493-C-GT supports 56 kbps V.92 plus lower V-series and Bell modes, but real-line attenuation, noise, echo, and central-office equipment can affect connection establishment. Validate the complete modem configuration, host-interface timing, and line-state handling at every supported fallback rate before field deployment.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The verified catalog records do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because the SI2493-C-GT is an analog communications modem IC rather than an automotive-qualified device.

Daten verifiziert am: 2026-11-10 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

SI2493-C-GT SI2493-C-GT datasheet SI2493-C-GT datasheet pdf SI2493-C-GT pinout SI2493-C-GT specifications SI2493-C-GT 24-TSSOP Skyworks SI2493-C-GT SI2493-C-GT equivalent SI2493-C-GT replacement SI2493-C-GT vs SI2493-D-GT SI2493-C-GT price SI2493-C-GT stock 56 kbps V.92 modem IC SI2493-C-GT analog line modem

Verwandte Bauteile & Begriffe

Skyworks Solutions Silicon Labs SI2493-C-GT SI2493-D-GT SI2493-C-FT V.92 V.90 V.21 V.22 V.23 V.29 V.32 V.34 Bell 103 Bell 212A ISOmodem system-side modem 56 kbps modem 24-TSSOP TSSOP package family surface mount analog telephone line copper-line data communication remote monitoring legacy modem interoperability
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen