SI2493-C-GT - 56 kbps V.92 Modem IC | 24-TSSOP
部品番号: SI2493-C-GT ✓ 生産中SI2493-C-GT 概要
An ISOmodem is a single-chip implementation of the International Telecommunications Union modem recommendations used to move data across the Plain Old Telephone Service network. This integration combines modem signal processing, line-interface functions, and data-control logic in one device, reducing the component count and board area needed for a complete analog-line data modem. The 56 kbps V.92 operating mode places the SI2493-C-GT in the class of devices used for high-speed analog access, remote diagnostics, and legacy data-collection equipment.
The principal feature is its multi-standard protocol support within one package. V.21 through V.34 cover lower-rate asynchronous and synchronous modes, while V.90, V.92, Bell 103, and Bell 212A address widely deployed analog modem standards. This range allows a single board design to interoperate with equipment using different fallback rates and modulation formats. The 56 kbps V.92 data rate is the headline operating specification used to classify the part in distributor catalogs.
The 24-TSSOP package is intended for surface-mount assembly and provides a compact solution for equipment where analog telephone-line connectivity must coexist with digital control logic. Its narrow TSSOP body supports automated PCB assembly, while a tube package matches prototype and moderate-volume production workflows. Board-level implementation still requires external line-interface components, isolation or protection appropriate to the target interface, bypass capacitors, and a controller able to service the modem registers.
For system designers, the SI2493-C-GT is most relevant when maintaining a legacy modem endpoint, building remote monitoring equipment, or supporting copper-line data transmission where endpoint compatibility matters more than modern broadband connectivity. A careful interface review should confirm line-rate requirements, supported modulation modes, host-bus expectations, and the external analog network requirements before the PCB is released.
This page consolidates the verified catalog information for the SI2493-C-GT, places its protocol capabilities in engineering context, and distinguishes verified facts from parameters that must be confirmed in the manufacturer datasheet before layout or firmware development.
ドロップイン代替品: SI2493-C-GT — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: SI2493-C-GT (同一形状・フットプリント) — 相違点: Maximum Data Rate, Device Type, Package, Package Length.
SI2493-D-GT
✅ ドロップイン価格はお問い合わせください
データシートを見る →SI2493-C-FT
✅ ドロップイン価格はお問い合わせください
データシートを見る →SI2493-C-GT 仕様
| Product Type | V.92 ISOmodem system-side IC |
| Maximum Data Rate | 56 kbps |
| Supported Data Formats | V.21, V.22, V.23, V.29, V.32, V.34, V.90, V.92 |
| Bell Compatibility | Bell 103, Bell 212A |
| パッケージ | 24-TSSOP |
| Package Width | 4.40 mm |
| Package Length | 0.173 inch |
| Packaging | Tube |
| 実装タイプ | Surface mount |
| Maximum Modem Data Rate | 56 kbps |
| Manufacturer | Skyworks Solutions Inc. |
SI2493-C-GT 0.173 inch ピン配置ガイド
SI2493-C-GT (0.173 inch パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: SI2493-C-GT.
詳細は データシート をご参照ください。
主な用途
SI2493-C-GT の用途: 6 件s: Legacy Analog Telephone-Line Data Links, Remote Monitoring and Telemetry, Industrial Equipment Service Interfaces, Fax and Legacy Communications Equipment, Data-Collection and Payment Terminals, Legacy Endpoint Maintenance.
Legacy Analog Telephone-Line Data Links
The SI2493-C-GT fits equipment that must exchange data over an existing analog telephone network rather than an Ethernet or broadband connection. Its 56 kbps V.92 mode provides the highest listed operating rate, while V.21, V.22, V.23, V.29, V.32, V.34, V.90, Bell 103, and Bell 212A support enables negotiation with a wide range of installed modem endpoints. The 24-TSSOP package keeps the controller footprint compact. Integration still requires the application-specific external line network, isolation, protection, and signal-conditioning components specified in the manufacturer interface guidance.
おすすめ
Remote Monitoring and Telemetry
The SI2493-C-GT can serve as the communications engine in remote monitoring equipment that reaches endpoints through copper telephone wiring. A 56 kbps V.92 path is suitable for collecting operational measurements, configuration files, and diagnostic records, while the older supported standards improve the chance of connecting to older remote equipment. The 24-pin TSSOP allows the modem circuitry to be placed beside a control processor, but engineers must budget board area for the external line interface and should verify real-world line noise, attenuation, and answer tones during integration testing.
おすすめ
Industrial Equipment Service Interfaces
Industrial machinery and field-service equipment can use the SI2493-C-GT to provide a dedicated analog-line service connection for diagnostics, firmware retrieval, or configuration exchange. Its multi-standard support is valuable when technicians connect through different central-office or customer-premises modem configurations. The 56 kbps V.92 capability shortens transfer times compared with lower-rate fallback modes, while the broad Bell and V-series list supports mixed equipment fleets. The design must include surge protection appropriate to the exposed line, and functional safety or regulatory requirements should be assessed separately for each installation environment.
おすすめ
Fax and Legacy Communications Equipment
The SI2493-C-GT is relevant to fax, terminal, and legacy communications products that must interoperate with established analog modem standards. Supporting V.21 through V.34 alongside V.90, V.92, Bell 103, and Bell 212A allows one communications engine to cover several historical connection modes. This reduces the need for separate devices when equipment must connect to old and newer remote endpoints. Engineers should verify the precise modulation, framing, and control behavior required by the target equipment in the manufacturer datasheet, particularly for V.34 and V.92 operation.
おすすめ
Data-Collection and Payment Terminals
Data-collection terminals and payment-oriented appliances that depend on copper-line connectivity can use the SI2493-C-GT as a compact system-side ISOmodem. The 56 kbps V.92 rate supports higher-volume transaction or record transfers, and the lower supported standards provide interoperability with conventional remote access equipment. Its 24-TSSOP package is straightforward to place beside a digital controller on a densely populated PCB. Because these systems frequently connect to external analog lines, designers should implement the required isolation and surge protection and verify end-to-end communication against representative providers.
おすすめ
Legacy Endpoint Maintenance
The SI2493-C-GT is well suited to maintenance platforms intended to service retired or long-lived equipment that retains analog modem interfaces. Its combination of V.92 performance with V.21-to-V.34 and Bell compatibility enables one board to reach endpoints configured for different historical standards. The tube-packaged 24-TSSOP is practical for prototype builds and controlled production runs. Maintenance products should also test connection establishment against representative equipment, review line-state handling, and confirm whether the customer environment requires any additional isolation or surge-protection provisions.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: SI2493-C-GT — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | SI2493-D-GT | SI2493-C-FT |
|---|---|---|---|
| Manufacturer | Skyworks Solutions | Skyworks Solutions | Skyworks Solutions |
| Package | 24-TSSOP | 24-TSSOP | 24-TSSOP |
| Component Type | V.92 ISOmodem system-side IC | V.92 ISOmodem system-side IC | Related SI2493-C family modem variant |
主な差別化要因
- Broad legacy-standard coverage in one modem IC (vs SI2493-D-GT)
- Documented direct-substitute relationship (vs SI2493-D-GT)
- Same-family configuration comparison (vs SI2493-C-FT)
設計ノート
Do not treat the 24-TSSOP body size as sufficient evidence for a drop-in replacement. Confirm every electrical and logical function against the pin-description table, especially analog line connections, supply pins, grounds, and interface timing. The SI2493-D-GT is listed as a direct substitute, while the SI2493-C-FT comparison explicitly involves voltage range, power consumption, and package characteristics; validate the exact variant against the schematic before procurement release.
Separate the modem's analog line-network section from sensitive digital and clock routing. Use the manufacturer reference layout for the external line components, keep the protected copper and surge path away from controller signals, and follow the package drawing for thermal-pad or exposed-connection requirements. Confirm whether the selected 24-TSSOP variant uses an exposed pad because that determines the required land pattern and assembly process.
Test line acquisition and fallback behavior using representative telephone networks rather than only a local bench termination. The SI2493-C-GT supports 56 kbps V.92 plus lower V-series and Bell modes, but real-line attenuation, noise, echo, and central-office equipment can affect connection establishment. Validate the complete modem configuration, host-interface timing, and line-state handling at every supported fallback rate before field deployment.
コンプライアンス情報
The verified catalog records do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because the SI2493-C-GT is an analog communications modem IC rather than an automotive-qualified device.