SI3208-B-FM - Dual ProSLIC Interface | Silicon Labs
Teilenummer: SI3208-B-FM ✗ AbgekündigtSI3208-B-FM Übersicht
A ProSLIC is a programmable line-interface IC that combines subscriber-line signal generation, voice processing, codec functions, and line supervision in one package. In the broader hierarchy, it is a telecom interface IC within the interface IC category, connecting a communications processor or digital switching system to an analog subscriber line. Its integrated processing allows a voice terminal to support analog signaling while communicating digitally with the rest of the equipment.
The SI3208-B-FM integrates two circuits into one package, reducing the component count in multichannel line-card designs. Its supported GCI, PCM, and SPI interfaces allow connection to different digital signal architectures, while the 3.3 V operating supply supports low-voltage telecom equipment. The exposed-pad package provides a thermal and electrical land pattern intended for careful PCB layout and adequate copper thermal management.
Technical design depends on the exact channel count, programmable voice features, digital interface requirements, and line-interface functions implemented by the surrounding system. Because this integrated circuit controls both digital control paths and analog line-related behavior, board-level decisions about grounding, power distribution, signal integrity, and thermal dissipation can influence overall voice-channel performance. Consult the manufacturer datasheet for register definitions, electrical limits, timing, and application circuitry.
Typical uses include voice gateways, fiber-to-copper media converters, subscriber-line access concentrators, digital loop carriers, and embedded voice adapters. The two-channel configuration is particularly relevant to designs that need two subscriber voice paths without allocating a separate single-channel package to each path. Software support and system interoperability must also be confirmed when replacing an incumbent line-interface device.
For PCB implementation, place the device and its supporting passive components according to the manufacturer reference layout, connect the exposed pad to the designated ground plane, and maintain continuous return paths beneath digital and analog sections. Decouple each supply rail locally and keep high-current switching or line-driver connections away from sensitive control and communication nets.
This product page consolidates the verified device identity, package details, lifecycle status, interface types, procurement considerations, and engineering guidance. It also distinguishes confirmed drop-in information from unverified substitutions and highlights the documentation, thermal, and layout checks that engineers should perform before releasing a subscriber-line interface design.
Drop-in-Alternativen für SI3208-B-FM – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit SI3208-B-FM (gleiche Bauform und Footprint) – abweichend in Number of Circuits, Product Type.
SI3209-B-FM
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →SI3208-B-FM Technische Daten
| Product Type | Subscriber Line Interface Concept (SLIC), CODEC |
| Series | ProSLIC |
| Number of Circuits | 2 |
| Betriebsversorgungsspannung | 3.3 V |
| Digital Interfaces | GCI, PCM, SPI |
| Gehäuse | 40-VFQFN exposed pad, 6 mm x 6 mm |
| Montageart | Surface mount |
| Packaging | Tray |
| Lebenszyklusstatus | Obsolete (EOL) |
SI3208-B-FM 40-vfqfn exposed pad, 6 mm x 6 mm Pinbelegungsleitfaden
Pinbelegung für SI3208-B-FM (40-vfqfn exposed pad, 6 mm x 6 mm-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für SI3208-B-FM.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
SI3208-B-FM ist geeignet für 6 Anwendungs: Voice-over-PON Media Converters, Fiber-to-Copper Voice Gateways, Digital Loop Carrier Equipment, Subscriber-Line Access Concentrators, Embedded Voice Adapter Products, Legacy Voice Testing and Monitoring.
Voice-over-PON Media Converters
The SI3208-B-FM fits legacy voice-over-PON media-converter designs that require two subscriber voice paths and a digital host connection. Its two integrated circuits allow a single 40-VFQFN package to serve two channels, while GCI, PCM, and SPI connectivity supports different system architectures. The documented 3.3 V operating supply is appropriate for low-voltage line-card electronics. Because the device is obsolete, the implementation must retain the established ProSLIC firmware, register model, and line-equipment qualification. Verify host timing and thermal performance before adapting the design to new production.
Fiber-to-Copper Voice Gateways
The SI3208-B-FM can support a two-line analog voice section in a fiber-to-copper gateway when the host processor can operate the ProSLIC through its documented GCI, PCM, or SPI interfaces. Integrating two subscriber-line channels into one 40-VFQFN package can simplify a compact line-card layout compared with separate single-channel devices. The 3.3 V supply matches common low-voltage gateway electronics. For a new gateway, confirm availability of the complete firmware and driver stack, then reproduce the manufacturer reference layout, exposed-pad grounding, and isolation-network interface to preserve voice quality and regulatory performance.
Digital Loop Carrier Equipment
The SI3208-B-FM is suited to maintaining existing digital loop carrier line cards that require two subscriber-line channels in a compact surface-mount package. Its ProSLIC function, 3.3 V operation, and GCI, PCM, and SPI interfaces allow the IC to bridge digital switching hardware with analog subscriber lines. The two-channel count supports channel-dense equipment and can reduce PCB area compared with two single-channel implementations. Because lifecycle status is obsolete, equipment extenders should secure continuity of exact-marked stock and preserve the original system software, calibration, and line-interface network configuration.
Subscriber-Line Access Concentrators
The SI3208-B-FM can provide integrated voice-line interfaces for subscriber-line access concentrators built around the ProSLIC architecture. Two circuits per package support multiple analog voice services while GCI, PCM, and SPI connectivity lets the concentrator select an appropriate digital transport. Its 40-VFQFN exposed-pad package helps achieve compact line-card density, although careful copper allocation and thermal analysis remain necessary. For expansion programs, validate the original host protocol, firmware configuration, and line-testing procedures. For new concentrator platforms, compare the device against currently supported telecom interface controllers to avoid extending an obsolete subsystem.
Embedded Voice Adapter Products
The SI3208-B-FM is applicable to legacy embedded voice adapters that terminate two analog subscriber lines and expose them to an embedded host processor. The ProSLIC architecture combines Subscriber Line Interface Concept and CODEC functions, while the available GCI, PCM, and SPI paths accommodate different embedded digital interfaces. Its two-channel configuration can reduce component count in a compact adapter, and the 3.3 V supply suits modern embedded logic. Confirm processor driver support, startup behavior, and the required line-network components. Existing adapters may benefit from board reuse, but new products should plan for supported firmware and supply continuity.
Legacy Voice Testing and Monitoring
The SI3208-B-FM can be retained in telecom test equipment designed around its two-channel ProSLIC behavior, particularly when the same firmware and digital interface architecture are already integrated. Its GCI, PCM, and SPI interfaces provide the connections required by a controller that generates, receives, or monitors subscriber voice traffic. The 3.3 V supply and compact 40-VFQFN footprint simplify replication of established test hardware. Because the IC is obsolete, laboratory users should inventory exact-marked units, preserve firmware, and validate line-side behavior against the manufacturer datasheet. New test platforms should evaluate active alternatives with supported lifecycle status.
Technische Referenzdaten für SI3208-B-FM – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | SI3209-B-FM |
|---|---|---|
| Manufacturer | Silicon Labs | Silicon Labs |
| Product Family | ProSLIC | ProSLIC family |
| Mounting Type | Surface mount | Surface mount |
Wichtigste Unterscheidungsmerkmale
- Two subscriber-line circuits in one package (vs. SI3209-B-FM)
- Documented low-voltage operation and flexible digital connectivity (vs. SI3209-B-FM)
- Established 6 mm by 6 mm exposed-pad footprint (vs. SI3209-B-FM)
Designhinweise
Use the manufacturer reference layout for the 40-VFQFN package and assign the exposed pad exactly as directed by the pin-description table. Place decoupling capacitors close to the relevant supply and ground pins, provide a low-impedance ground-plane connection beneath the exposed pad, and preserve the recommended layer stack. Do not use a generic QFN-40 land pattern because exposed-pad dimensions, solder-mask rules, and thermal-via requirements are package-specific.
Separate digital control paths from sensitive subscriber-line interfaces and return currents to avoid coupling line-driver and switching energy into GCI, PCM, or SPI signals. Keep clocks and communication traces short, provide continuous reference planes, and route exposed-pad vias with the pattern required by the manufacturer. Review the PCB against the device's clocking, grounding, and decoupling guidance before functional testing.
Do not treat the obsolete lifecycle designation as proof that every remaining unit has identical marking, firmware compatibility, or quality history. Before installation, compare the exact MPN, package, lot information, and datasheet revision, and verify that the system retains the required ProSLIC driver or configuration files. For replacements, check every pin, exposed-pad function, supply limit, interface timing, and software register model.
Thermal performance depends on the actual package dissipation, exposed-pad copper, via count, board area, airflow, and ambient temperature. Use the manufacturer's thermal information together with the application's worst-case operating condition rather than assuming that the exposed pad alone guarantees safe operation. Keep the ground plane continuous beneath the package, distribute thermal vias according to the recommended pattern, and verify the assembled board at the highest expected ambient temperature.
Compliance-Informationen
The available product records do not establish the target's RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. The 110 V lead-free statement appears in a search result for the related SI3208-B-FMR rather than the exact SI3208-B-FM and is not transferred.