Silicon Labs

SI3208-B-FM - Dual ProSLIC Interface | Silicon Labs

料号: SI3208-B-FM ✗ 停产
3.3 V Vdss 40-VFQFN exposed pad, 6 mm x 6 mm Package
最小起订量: 1 |

SI3208-B-FM 概述

The Silicon Labs SI3208-B-FM is a dual-channel Subscriber Line Interface Concept and CODEC integrated circuit designed for voice-over-PON and other subscriber-line access equipment. It operates from a 3.3 V supply, provides GCI, PCM, and SPI interfaces, and is packaged in a 40-pin VFQFN with exposed pad measuring 6 mm by 6 mm. The device belongs to the ProSLIC family of integrated telecom interface circuits.

A ProSLIC is a programmable line-interface IC that combines subscriber-line signal generation, voice processing, codec functions, and line supervision in one package. In the broader hierarchy, it is a telecom interface IC within the interface IC category, connecting a communications processor or digital switching system to an analog subscriber line. Its integrated processing allows a voice terminal to support analog signaling while communicating digitally with the rest of the equipment.

The SI3208-B-FM integrates two circuits into one package, reducing the component count in multichannel line-card designs. Its supported GCI, PCM, and SPI interfaces allow connection to different digital signal architectures, while the 3.3 V operating supply supports low-voltage telecom equipment. The exposed-pad package provides a thermal and electrical land pattern intended for careful PCB layout and adequate copper thermal management.

Technical design depends on the exact channel count, programmable voice features, digital interface requirements, and line-interface functions implemented by the surrounding system. Because this integrated circuit controls both digital control paths and analog line-related behavior, board-level decisions about grounding, power distribution, signal integrity, and thermal dissipation can influence overall voice-channel performance. Consult the manufacturer datasheet for register definitions, electrical limits, timing, and application circuitry.

Typical uses include voice gateways, fiber-to-copper media converters, subscriber-line access concentrators, digital loop carriers, and embedded voice adapters. The two-channel configuration is particularly relevant to designs that need two subscriber voice paths without allocating a separate single-channel package to each path. Software support and system interoperability must also be confirmed when replacing an incumbent line-interface device.

For PCB implementation, place the device and its supporting passive components according to the manufacturer reference layout, connect the exposed pad to the designated ground plane, and maintain continuous return paths beneath digital and analog sections. Decouple each supply rail locally and keep high-current switching or line-driver connections away from sensitive control and communication nets.

This product page consolidates the verified device identity, package details, lifecycle status, interface types, procurement considerations, and engineering guidance. It also distinguishes confirmed drop-in information from unverified substitutions and highlights the documentation, thermal, and layout checks that engineers should perform before releasing a subscriber-line interface design.

直接替换替代料: SI3208-B-FM ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: SI3208-B-FM (相同外形与封装尺寸) ——差异在于 Number of Circuits, Product Type.

Skyworks Solutions
Number of Circuits: 2 circuits
Product Type: PCM telecom interface IC
对比 SI3208-B-FM →

SI3209-B-FM

✅ 直接替换
Skyworks Solutions
📦 40-VFQFN (6x6)
PCM telecom interface IC · 2 circuits · PCM · Telecom interface IC · 135 V · Si3226/Si3227 linefeed interface family · Surface mount · Lead-free

联系询价

查看数据手册 →

SI3208-B-FM 规格参数

Product Type Subscriber Line Interface Concept (SLIC), CODEC
Series ProSLIC
Number of Circuits 2
工作电源电压 3.3 V
Digital Interfaces GCI, PCM, SPI
封装 40-VFQFN exposed pad, 6 mm x 6 mm
安装类型 Surface mount
Packaging Tray
生命周期状态 Obsolete (EOL)

SI3208-B-FM 40-vfqfn exposed pad, 6 mm x 6 mm 引脚配置指南

SI3208-B-FM(40-vfqfn exposed pad, 6 mm x 6 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

SI3208-B-FM 的 40-vfqfn exposed pad, 6 mm x 6 mm 封装引脚图

暂无详细引脚数据: SI3208-B-FM.

请参阅 数据手册 以查看完整引脚配置。

典型应用

SI3208-B-FM 适用于 6 应用s: Voice-over-PON Media Converters, Fiber-to-Copper Voice Gateways, Digital Loop Carrier Equipment, Subscriber-Line Access Concentrators, Embedded Voice Adapter Products, Legacy Voice Testing and Monitoring.

🌐

Voice-over-PON Media Converters

The SI3208-B-FM fits legacy voice-over-PON media-converter designs that require two subscriber voice paths and a digital host connection. Its two integrated circuits allow a single 40-VFQFN package to serve two channels, while GCI, PCM, and SPI connectivity supports different system architectures. The documented 3.3 V operating supply is appropriate for low-voltage line-card electronics. Because the device is obsolete, the implementation must retain the established ProSLIC firmware, register model, and line-equipment qualification. Verify host timing and thermal performance before adapting the design to new production.

🔧

Fiber-to-Copper Voice Gateways

The SI3208-B-FM can support a two-line analog voice section in a fiber-to-copper gateway when the host processor can operate the ProSLIC through its documented GCI, PCM, or SPI interfaces. Integrating two subscriber-line channels into one 40-VFQFN package can simplify a compact line-card layout compared with separate single-channel devices. The 3.3 V supply matches common low-voltage gateway electronics. For a new gateway, confirm availability of the complete firmware and driver stack, then reproduce the manufacturer reference layout, exposed-pad grounding, and isolation-network interface to preserve voice quality and regulatory performance.

🏭

Digital Loop Carrier Equipment

The SI3208-B-FM is suited to maintaining existing digital loop carrier line cards that require two subscriber-line channels in a compact surface-mount package. Its ProSLIC function, 3.3 V operation, and GCI, PCM, and SPI interfaces allow the IC to bridge digital switching hardware with analog subscriber lines. The two-channel count supports channel-dense equipment and can reduce PCB area compared with two single-channel implementations. Because lifecycle status is obsolete, equipment extenders should secure continuity of exact-marked stock and preserve the original system software, calibration, and line-interface network configuration.

📡

Subscriber-Line Access Concentrators

The SI3208-B-FM can provide integrated voice-line interfaces for subscriber-line access concentrators built around the ProSLIC architecture. Two circuits per package support multiple analog voice services while GCI, PCM, and SPI connectivity lets the concentrator select an appropriate digital transport. Its 40-VFQFN exposed-pad package helps achieve compact line-card density, although careful copper allocation and thermal analysis remain necessary. For expansion programs, validate the original host protocol, firmware configuration, and line-testing procedures. For new concentrator platforms, compare the device against currently supported telecom interface controllers to avoid extending an obsolete subsystem.

🖥️

Embedded Voice Adapter Products

The SI3208-B-FM is applicable to legacy embedded voice adapters that terminate two analog subscriber lines and expose them to an embedded host processor. The ProSLIC architecture combines Subscriber Line Interface Concept and CODEC functions, while the available GCI, PCM, and SPI paths accommodate different embedded digital interfaces. Its two-channel configuration can reduce component count in a compact adapter, and the 3.3 V supply suits modern embedded logic. Confirm processor driver support, startup behavior, and the required line-network components. Existing adapters may benefit from board reuse, but new products should plan for supported firmware and supply continuity.

🔧

Legacy Voice Testing and Monitoring

The SI3208-B-FM can be retained in telecom test equipment designed around its two-channel ProSLIC behavior, particularly when the same firmware and digital interface architecture are already integrated. Its GCI, PCM, and SPI interfaces provide the connections required by a controller that generates, receives, or monitors subscriber voice traffic. The 3.3 V supply and compact 40-VFQFN footprint simplify replication of established test hardware. Because the IC is obsolete, laboratory users should inventory exact-marked units, preserve firmware, and validate line-side behavior against the manufacturer datasheet. New test platforms should evaluate active alternatives with supported lifecycle status.

What is the SI3208-B-FM?
The SI3208-B-FM is a dual-channel ProSLIC Subscriber Line Interface Concept and CODEC IC for subscriber-line voice equipment. According to the manufacturer documentation listed for the device, it provides two circuits, operates from 3.3 V, supports GCI, PCM, and SPI interfaces, and uses a 40-VFQFN exposed-pad package. Its obsolete lifecycle status means new designs should confirm replacement availability before committing to the architecture.
What are the key specifications of SI3208-B-FM that engineers should know?
The SI3208-B-FM combines two subscriber-line circuits in one 40-VFQFN package and operates from a 3.3 V supply. The documented interface set includes GCI, PCM, and SPI, while the package is a 6 mm by 6 mm surface-mount VFQFN with an exposed pad. The device is identified as part of the ProSLIC family and is marked obsolete, making software, firmware, and supply continuity important design considerations.
Where can I download the SI3208-B-FM datasheet PDF?
The SI3208-B-FM datasheet can be located through the Silicon Labs document identified in the product records, while an archival indexing page is also available for the same device. The verified package data identifies the part as a 40-VFQFN exposed-pad device with two circuits and 3.3 V operation. Before implementing the circuit, obtain the manufacturer document and confirm its revision because a historical index can expose obsolete material.
Where can I find the SI3208-B-FM pinout?
The SI3208-B-FM pinout is defined by the pin-description table and land pattern in the manufacturer datasheet for the 40-VFQFN package. The package has 40 positions plus an exposed thermal pad, and the exposed pad must be assigned using the manufacturer pin-description table rather than treated as an interchangeable signal pin. Do not infer pad assignments from a generic QFN-40 drawing.
Is the SI3208-B-FM suitable for voice-over-PON equipment?
The SI3208-B-FM is suitable for legacy voice-over-PON and subscriber-line access designs that use compatible ProSLIC firmware and interface architecture. Its two integrated circuits support two voice paths per package, and the documented GCI, PCM, and SPI interfaces provide digital connectivity to a communications system. Current-product qualification should include host-interface timing, firmware support, line behavior, and lifecycle approval.
What is the difference between SI3208-B-FM and SI3209-B-FM?
The SI3208-B-FM and SI3209-B-FM are related ProSLIC-class interface devices, but their voltage, power-consumption, and package-size characteristics can differ. The SI3208-B-FM is identified as a two-circuit, 3.3 V, 40-VFQFN device, while the comparison record does not establish pin-for-pin equivalence for the SI3209-B-FM. Treat the SI3209-B-FM as a redesign candidate until its datasheet and land pattern confirm compatibility.
Is SI3208-B-FM the same as SI3209-B-FM?
No conclusion of identity is established between SI3208-B-FM and SI3209-B-FM from the available documentation. The SI3208-B-FM has two circuits, a 3.3 V operating supply, and a 40-VFQFN package, but the SI3209-B-FM may differ in voltage range, power consumption, or package size. Compare its exact pinout, electrical limits, firmware requirements, and exposed-pad layout before substitution.
What can replace SI3208-B-FM?
The closest identified replacement candidate is SI3209-B-FM, but it should not be treated as a confirmed drop-in replacement without a pin-level and firmware review. The SI3208-B-FM is a two-channel, 3.3 V ProSLIC in a 40-VFQFN package, so any substitute must preserve the required channel count, GCI/PCM/SPI behavior, electrical ratings, software model, and land pattern. Request lifecycle and sourcing support through the Request a Quote form.
Is there a cross-brand drop-in equivalent for SI3208-B-FM?
No cross-brand drop-in equivalent for the SI3208-B-FM has been verified. A legitimate replacement must match the 40-VFQFN land pattern, exposed-pad implementation, two-channel architecture, 3.3 V supply, subscriber-line functions, and digital interfaces. Generic cross-reference search pages can generate candidates, but engineers must confirm each candidate against the manufacturer datasheet and existing firmware before treating it as a drop-in part.
Where can I buy SI3208-B-FM online?
The SI3208-B-FM is a legacy, obsolete component and its current stock is not confirmed on this page. Use the Request a Quote form on this page to request current availability, minimum order quantity, condition, traceable supply options, and lead time for the exact SI3208-B-FM marking. Buyers should also request the manufacturer datasheet revision and any authorized lifecycle notice associated with the supplied lot.
What is the price of SI3208-B-FM?
Current pricing for the obsolete SI3208-B-FM is not shown because no qualifying current quantity-break listing was established for this exact MPN. Use the Request a Quote form on this page for a unit quotation based on quantity, condition, traceability, and current inventory. The structured pricing area may update independently, while the quote form provides the appropriate route for a legacy part that may be offered only in limited quantities.
What is the lead time for SI3208-B-FM?
The current lead time for SI3208-B-FM depends on remaining factory or channel inventory and is not fixed by the manufacturer documentation. Because the part is marked obsolete, request the lead time through the Request a Quote form on this page and include the required quantity, date code, traceability level, and acceptable condition. Include the manufacturer datasheet revision with the request so the quotation applies to the exact intended design.
Is SI3208-B-FM in stock?
Current SI3208-B-FM stock is not confirmed, despite historical listings that described orderability. The verified manufacturer-related record identifies the device as obsolete, and no current stock quantity is published in the technical record used for this page. Submit a Request a Quote request stating whether new, refurbished, or previously sourced material is acceptable, along with required quantity and date-code constraints.
When should I choose SI3208-B-FM over SI3209-B-FM?
Choose the SI3208-B-FM only when an existing design specifically requires its two-channel ProSLIC architecture, 3.3 V supply, GCI/PCM/SPI interface behavior, and 40-VFQFN layout. Consider SI3209-B-FM when its datasheet confirms the needed voltage, power, package, pinout, and firmware requirements. For new production, favor a supported lifecycle path unless continuity of an existing board is the overriding requirement.
Does SI3208-B-FM require thermal management for the exposed pad?
Thermal management for the SI3208-B-FM exposed pad should follow the manufacturer layout guidance rather than a generic assumption. The 40-VFQFN package has a 6 mm by 6 mm footprint with an exposed pad intended to improve heat transfer, but actual junction temperature depends on copper area, airflow, board construction, and device dissipation. Provide uninterrupted ground-plane copper beneath the pad and calculate the worst-case temperature rise before release.

工程参考数据: SI3208-B-FM ——对比、设计指导和合规信息。

选型指南

Choose the SI3208-B-FM for maintenance or replication of an existing two-channel ProSLIC design when the board already uses its 3.3 V supply, GCI/PCM/SPI interface arrangement, firmware, and 40-VFQFN land pattern. Its two integrated circuits and documented low-voltage operation are particularly useful when continuity of an established design matters more than long-term lifecycle support. Consider SI3209-B-FM only after its datasheet confirms the package dimensions, pin assignments, supply requirements, channel count, electrical limits, and software compatibility. Do not select the target for a new product without confirming exact-marked stock, the required firmware and line-network components, and a sustainable supply plan. Because the device is obsolete, any redesign should also evaluate currently supported telecom interface controllers even when they require a board change.

与替代料对比

参数 本产品 SI3209-B-FM
Manufacturer Silicon Labs Silicon Labs
Product Family ProSLIC ProSLIC family
Mounting Type Surface mount Surface mount

关键差异点

  • Two subscriber-line circuits in one package (对比 SI3209-B-FM)
  • Documented low-voltage operation and flexible digital connectivity (对比 SI3209-B-FM)
  • Established 6 mm by 6 mm exposed-pad footprint (对比 SI3209-B-FM)

设计说明

Use the manufacturer reference layout for the 40-VFQFN package and assign the exposed pad exactly as directed by the pin-description table. Place decoupling capacitors close to the relevant supply and ground pins, provide a low-impedance ground-plane connection beneath the exposed pad, and preserve the recommended layer stack. Do not use a generic QFN-40 land pattern because exposed-pad dimensions, solder-mask rules, and thermal-via requirements are package-specific.

Separate digital control paths from sensitive subscriber-line interfaces and return currents to avoid coupling line-driver and switching energy into GCI, PCM, or SPI signals. Keep clocks and communication traces short, provide continuous reference planes, and route exposed-pad vias with the pattern required by the manufacturer. Review the PCB against the device's clocking, grounding, and decoupling guidance before functional testing.

Do not treat the obsolete lifecycle designation as proof that every remaining unit has identical marking, firmware compatibility, or quality history. Before installation, compare the exact MPN, package, lot information, and datasheet revision, and verify that the system retains the required ProSLIC driver or configuration files. For replacements, check every pin, exposed-pad function, supply limit, interface timing, and software register model.

Thermal performance depends on the actual package dissipation, exposed-pad copper, via count, board area, airflow, and ambient temperature. Use the manufacturer's thermal information together with the application's worst-case operating condition rather than assuming that the exposed pad alone guarantees safe operation. Keep the ground plane continuous beneath the package, distribute thermal vias according to the recommended pattern, and verify the assembled board at the highest expected ambient temperature.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The available product records do not establish the target's RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. The 110 V lead-free statement appears in a search result for the related SI3208-B-FMR rather than the exact SI3208-B-FM and is not transferred.

数据核验日期: 2026-11-16 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

SI3208-B-FM datasheet SI3208-B-FM pinout SI3208-B-FM datasheet pdf SI3208-B-FM equivalent SI3208-B-FM replacement SI3208-B-FM vs SI3209-B-FM SI3208-B-FM footprint SI3208-B-FM application circuit SI3208-B-FM price SI3208-B-FM stock Silicon Labs SI3208-B-FM SI3208-B-FM 3.3V ProSLIC SI3208-B-FM 40-VFQFN SI3208-B-FM GCI PCM SPI

相关元器件 & 术语

Silicon Labs SI3208-B-FM SI3209-B-FM ProSLIC Subscriber Line Interface Concept SLIC CODEC telecom interface IC interface IC integrated circuit semiconductor 3.3 V GCI PCM SPI 40-VFQFN QFN family surface mount SMD exposed pad voice-over-PON subscriber line access digital loop carrier fiber-to-copper gateway line interface
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情