Texas Instruments

SN74HC368D - 6-Channel 3-State Inverting Buffer | Texas Instruments

Teilenummer: SN74HC368D ✓ Aktiv
2 V to 6 V Vdss 16-pin SOIC Package
MOQ: 1 |

SN74HC368D Übersicht

The Texas Instruments SN74HC368D is a six-channel inverting buffer and line driver with 3-state outputs, a 2 V to 6 V supply range, and a 16-pin SOIC package. The device is organized as one four-line and one two-line section, allowing independent control of the two groups through separate active-low output-enable inputs.

A 74HC-series logic buffer is a digital bus-interface component that strengthens signal levels, isolates a source from downstream loads, and provides controlled connection to shared buses. The SN74HC368 belongs to the broader CMOS logic hierarchy and is intended for systems that require higher drive capability or reduced loading without adding another active protocol level. Its inverting outputs support clock and data paths where inversion is acceptable or intentional.

The main features include six inverting channels, individual 3-state output control, operation from 2 V to 6 V, and low-power CMOS design. The active-low enable inputs place the associated output channels in a high-impedance state when disabled, allowing multiple devices to share a bus without actively driving conflicting logic levels. This architecture is useful for memory address drivers, clock distribution, bus-oriented transmitters, and control-signal isolation.

The two output groups are organized as dual four-line and two-line buffers. Their enable inputs are labeled 1OE and 2OE, permitting two independently enabled bus segments on one package. When an enable input is low, the associated outputs pass inverted input data; when it is high, the relevant outputs enter the high-impedance state. This grouping provides more flexibility than a single shared control while retaining a compact 16-pin footprint.

Typical uses include driving clock lines, translating between lightly loaded bus nodes and higher-capacitance board traces, and connecting several subcircuits to shared data buses. The 3-state outputs are particularly suitable for systems in which peripheral devices must be disconnected during inactive periods. Logic compatibility and timing should be checked against the connected HC-family devices, and output-enable transitions should remain synchronized with the signals being disabled.

For robust board-level use, place the device close to the driven bus, minimize trace length on high-speed clock paths, and maintain a continuous ground reference. Decoupling capacitors should be placed directly between VCC and GND, with the power and ground pins connected to low-impedance planes. Avoid using the 3-state outputs as a substitute for proper bus turnaround or direction-control logic.

This page combines the functional description, package and pin information, drop-in replacement analysis, comparison data, and practical interface-design guidance. It is intended to help engineers identify the correct 74HC-family buffer for shared-bus, clock-driving, and inverting-interface designs before finalizing a PCB layout or production BOM.

Drop-in-Alternativen für SN74HC368D – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

CD74HC368M

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 16-SOIC
Same 6-channel inverting 3-state function and 2 V to 6 V supply range, with 0% difference in the listed headline voltage and channel count

📋 Referenzalternative (nicht im Katalog)

74HC368D,653

✅ Drop-In
📦 16-SOIC
Same 6-channel inverting 3-state function and 2 V to 6 V supply range, with 0% difference in the listed headline voltage and channel count

📋 Referenzalternative (nicht im Katalog)

SN74HC368D Grenzwerte & elektrische Eigenschaften

Number of Channels 6 channels
Logic Type Hex inverting buffer and line driver
Ausgangskonfiguration 6-channel 3-state output
Speicherorganisation Dual 4-line and 2-line
Supply Voltage Range 2 V to 6 V
Output Enable Polarity Active low
Number of Output Enable Inputs 2 independent inputs
Gehäuse 16-pin SOIC
Montageart Surface mount
Betriebstemperaturbereich -40 °C to +85 °C
Logic Level HC-series CMOS

SN74HC368D Pin-Konfiguration

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
Pin 1 1A1 — Input for output 1Y1
Pin 2 1A2 — Input for output 1Y2
Pin 3 1A3 — Input for output 1Y3
Pin 4 1A4 — Input for output 1Y4
Pin 5 1OE — Active-low output enable for the four-line section
Pin 6 2A1 — Input for output 2Y1
Pin 7 2A2 — Input for output 2Y2
Pin 8 GND — Ground reference
Pin 9 2A3 — Input for output 2Y3
Pin 10 2A4 — Input for output 2Y4
Pin 11 2OE — Active-low output enable for the two-line section
Pin 12 1Y1 — Inverted 3-state output 1
Pin 13 1Y2 — Inverted 3-state output 2
Pin 14 1Y3 — Inverted 3-state output 3
Pin 15 1Y4 — Inverted 3-state output 4
Pin 16 VCC — Power supply

Typische Anwendungen

SN74HC368D ist geeignet für 6 Anwendungs: Shared Data-Bus Interface, Clock Distribution, Memory Address Driving, Peripheral Bus Isolation, Industrial Control Signal Routing, Test and Measurement Interface.

🌐

Shared Data-Bus Interface

The SN74HC368D is useful in a shared data-bus arrangement where multiple logic sections must connect and disconnect from the same node. Its six inverting channels are divided into a four-line group and a two-line group, each controlled by a separate active-low enable input. When an enable input is high, the associated outputs become high impedance and stop contributing to the bus node. When it is low, the section drives the inverted input signals with additional buffering. This arrangement reduces contention when several subcircuits share a trace, provided enable timing is coordinated with the receiving logic and the connected devices use compatible 74HC signal levels.

⏱️

Clock Distribution

The SN74HC368D can distribute an inverted clock when the receiving logic can accommodate the inversion and the required edge rate. Each of its four-line and two-line sections has an independent active-low output enable, allowing clock drive to one portion of a board while another portion remains isolated. The 2 V to 6 V operating range supports standard 74HC-family rails, while the buffer function helps reduce source loading when driving multiple clock inputs. Timing checks should include clock rise and fall time, propagation delay, capacitive loading, and any downstream requirement for a non-inverted clock waveform.

🖥️

Memory Address Driving

The SN74HC368D is applicable to memory-interface routing where address or control signals must drive a lightly loaded board segment and then be disconnected from a shared line. Its 3-state outputs prevent the buffer from holding the bus when another address source needs control. The six available channels can be allocated across address, chip-select, or read-control paths, subject to the datasheet's four-line and two-line grouping. Because the outputs invert their inputs, the system logic must account for that polarity and maintain valid setup and hold timing at the destination device.

🔧

Peripheral Bus Isolation

The SN74HC368D can isolate a peripheral interface from a shared system bus by placing its output section in the high-impedance state during periods when the peripheral does not own the bus. The four-line and two-line organization allows the design to assign related data and control signals to independently enabled groups. The inversion must be included in the interface logic, and enable inputs should not change while a receiving device is sampling an active transition. This approach is most appropriate for 74HC-compatible systems that need simple buffered isolation rather than direction-controlled, level-translating bus transceivers.

🏭

Industrial Control Signal Routing

The SN74HC368D fits control boards that distribute active-low or inverted control signals across multiple logic blocks while selectively disconnecting outputs from shared wiring. Its separate enable controls let a controller prevent simultaneous drive from two sections, and the 2 V to 6 V supply range accommodates common 74HC logic rails. For industrial equipment, the exact temperature grade and qualification status should be checked against the environmental requirements. Layout should also account for ground bounce and supply transients so that a disabled buffer does not introduce unwanted current into the control node.

📟

Test and Measurement Interface

The SN74HC368D can buffer control signals in test and measurement equipment where a central controller must connect to a line driver, memory device, or logic card through a shared backplane. Its six 3-state channels provide selectable participation in the bus, while the inverted output behavior is predictable and easy to include in stimulus timing. The package supports compact surface-mount implementation, but signal-integrity checks remain important because long backplane traces can add capacitance and reflections. Keep enable paths short, use controlled-impedance routing where appropriate, and verify timing with the highest expected loading condition.

Zusammenfassung der empfohlenen Produkte

MC74F243M onsemi Verwendet in: Shared Data-Bus Interface, Memory Address Driving, Peripheral Bus Isolation, Test and Measurement Interface MC74HC244 Buffered 3-state logic for adjacent fanout and bus-loading stages Verwendet in: Shared Data-Bus Interface, Peripheral Bus Isolation, Industrial Control Signal Routing, Test and Measurement Interface SN74HC240D Inverting 3-state octal buffer for related clock and bus fanout Verwendet in: Clock Distribution SN74HC244D Non-inverting 3-state buffer for clock fanout where inversion is undesirable Verwendet in: Clock Distribution SN74HC138D Address decoding logic for multi-device memory selection Verwendet in: Memory Address Driving SN74HC125D Texas Instruments Verwendet in: Industrial Control Signal Routing
Where can I buy SN74HC368D online?
The SN74HC368D can be requested through the Request a Quote form on this page. The form accepts the exact Texas Instruments ordering code, SN74HC368D, allowing the procurement team to confirm current availability, order quantity, delivery timing, and the appropriate 16-pin SOIC shipping format without relying on a static listing.
What is the price of SN74HC368D?
Use the Request a Quote form on this page for the current SN74HC368D unit price and quantity availability. Pricing is not embedded in this technical description because commercial terms can change independently of the device specifications. The request should identify SN74HC368D, the desired pack quantity, and the delivery location.
What is the lead time for SN74HC368D?
The current lead time for SN74HC368D should be confirmed through the Request a Quote form on this page. Texas Instruments identifies SN74HC368D as a 6-channel, 2 V to 6 V inverting buffer with 3-state outputs, and the order response can provide manufacturing availability, minimum order quantity, and shipment timing for the requested quantity.
Is SN74HC368D in stock?
Stock for SN74HC368D is confirmed through the Request a Quote form on this page. Enter the required quantity and packaging preference, and the quotation response will indicate current availability and expected fulfillment timing. This avoids presenting an outdated stock state for a standard 16-pin SOIC logic device.
What are the key specifications of SN74HC368D that engineers should know?
The SN74HC368D is a six-channel inverting buffer and line driver operating from 2 V to 6 V with 3-state outputs. According to the Texas Instruments SN74HC368 product page, the device is organized as dual four-line and two-line sections with separate active-low output-enable inputs, and it is offered in a 16-pin SOIC package.
What is the difference between SN74HC368D and Nexperia 74HC368D,653?
SN74HC368D and Nexperia 74HC368D,653 both describe a six-channel inverting 74HC-style buffer with 3-state outputs in a 16-pin SOIC package. The manufacturer changes from Texas Instruments to Nexperia, while the listed operating-voltage and logical organization remain equivalent at 2 V to 6 V and dual 4-line plus 2-line grouping.
SN74HC368D vs 74HC368D,653 - which is better for a shared bus?
SN74HC368D and 74HC368D,653 are functionally comparable choices for a shared 74HC-style bus because both provide six inverting channels, active-low output enable, and 3-state outputs in 16-pin SOIC packages. Selection can therefore focus on procurement availability, supported temperature grade, qualification needs, and manufacturer documentation rather than a footprint change.
When should I choose SN74HC368D over 74HC368D,653?
Choose SN74HC368D when your design specifically standardizes the Texas Instruments 74HC368 device family, requires the SN74HC368D order code, or benefits from that manufacturer's product and quality documentation. Choose 74HC368D,653 when Nexperia sourcing is preferred and its qualification and availability meet the product requirements.
Is SN74HC368D suitable for a clock-driver application?
SN74HC368D is suitable for clock-driver applications when inversion is acceptable and the driven clock can tolerate the output transition times. The Texas Instruments product page identifies the part as a six-channel 3-state buffer and line driver, while the SN74HC368 documentation describes its use for clock drivers and bus-oriented interface circuits.
What can replace SN74HC368D?
A drop-in replacement for SN74HC368D must use the same 16-pin SOIC footprint, retain the six-channel inverting 3-state function, provide the same 2 V to 6 V supply range, and keep both active-low enable controls. The Nexperia 74HC368D,653 is one documented equivalent; verify timing, output-current, temperature, and qualification requirements before production release.
Is Nexperia 74HC368D,653 a drop-in replacement for SN74HC368D?
The Nexperia 74HC368D,653 is a drop-in candidate for SN74HC368D because both are listed as 16-pin SOIC devices containing six inverting 74HC buffer channels with active-low, 3-state output control. Final substitution should still confirm output-current capability, propagation delay, input transition-time limits, temperature grade, and lifecycle status.
Where to download the SN74HC368D datasheet PDF?
The official SN74HC368D documentation is available through the Texas Instruments product page and its linked PDF at https://www.ti.com/lit/gpn/SN74HC368. Use the manufacturer document for the device description, pin configuration, electrical characteristics, recommended operating conditions, and ordering information.
Where can I find the SN74HC368D pinout?
The SN74HC368D pinout is shown in the manufacturer datasheet and includes six inputs, two active-low output-enable inputs, six outputs, VCC, and GND across 16 SOIC pins. The output sections are organized as one four-line group and one two-line group, so PCB routing should preserve the input-to-output and enable assignments shown in the pin-description table.
How does the 3-state output on SN74HC368D work?
SN74HC368D uses active-low output-enable inputs to place selected output channels into a high-impedance state. When the applicable enable input is low, the corresponding outputs pass inverted input data; when it is high, those outputs stop driving the bus. The two enable groups permit a four-line and a two-line section to be controlled independently.
Are SN74HC368D and Nexperia 74HC368D,653 RoHS compliant?
RoHS status should be confirmed in the manufacturer documentation applicable to the exact ordered part. The SN74HC368 product documentation and the Nexperia 74HC368D,653 ordering information should be reviewed for the current material and environmental declarations rather than assuming compliance from the 74HC logic family alone.

Technische Referenzdaten für SN74HC368D – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose SN74HC368D when the design requires a six-channel inverting 74HC buffer with independently enabled four-line and two-line output groups in a 16-pin SOIC package. It is appropriate for shared buses, clock distribution, memory address driving, and control-signal isolation where output inversion is acceptable. Nexperia 74HC368D,653 is a direct sourcing alternative when its current qualification, temperature range, lifecycle status, and timing characteristics meet the product requirements. CD74HC368M offers another same-footprint option in the Texas Instruments family, but its order information should be checked before use. For any substitution, verify supply voltage, output current, propagation delay, input transition-time limits, operating temperature, enable polarity, and package dimensions. Do not select the device merely by the 368 function number; the active-low enables and inverted outputs must match the surrounding logic.

Vergleich mit Alternativen

Parameter Dieses Produkt CD74HC368M 74HC368D,653
Brand Texas Instruments Texas Instruments Nexperia USA Inc.
Package 16-SOIC 16-SOIC - same 16-SOIC - same
Number of Channels 6 channels 6 channels 6 channels
Logic Function Hex inverting buffer and line driver Hex inverting buffer and line driver Hex inverting buffer and line driver
Output State 3-state 3-state 3-state
Supply Voltage Range 2 V to 6 V 2 V to 6 V 2 V to 6 V
Output Enable Dual active-low output enable Dual active-low output enable Dual active-low output enable
Channel Organization Dual 4-line and 2-line Dual 4-line and 2-line Dual 4-line and 2-line
Mounting Type Surface mount Surface mount Surface mount

Wichtigste Unterscheidungsmerkmale

  • Two independently controlled output groups (vs. 74HC368D,653)
  • Pin-compatible multi-source sourcing (vs. CD74HC368M)
  • Shared 74HC bus interface (vs. 74HC368D,653)

Designhinweise

Route the two active-low output-enable inputs as control signals with attention to their relationship to the data being disabled. When a group enters the high-impedance state, its associated outputs should not change state while the receiving device is sampling. Place the device close to the driven bus when clock or data timing is critical, and keep the ground-return path continuous to limit output switching noise.

Place the local VCC bypass capacitor directly between the VCC and GND pins, with the shortest possible ground connection. Follow the recommended capacitor value and placement in the manufacturer datasheet. Keep the supply and return paths away from noisy switching nodes, and verify that the power rail remains within the device's 2 V to 6 V operating range during startup, load changes, and supply disturbances.

Treat every enabled output as a digital signal source and check both edge rate and loading at the destination. Long PCB traces, connectors, and cable capacitance can slow transitions enough to cause timing failures even when the destination device has a nominal propagation-delay rating. Use the datasheet's recommended input transition-time limits and simulate or measure the worst-case connected load before release.

Do not confuse a disabled high-impedance output with a driven logic-low output. A high-impedance channel does not establish a valid low level and may require a pull-up or pull-down elsewhere on the bus. Also account for the inversion of every output: a low input produces a high enabled output. Verify enable polarity, logical inversion, and system reset behavior together to prevent unintended bus contention.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

Environmental and qualification declarations must be confirmed for the exact manufacturer order code and current production status.

Ähnliche Suchanfragen

SN74HC368D SN74HC368D datasheet SN74HC368D datasheet pdf SN74HC368D pinout SN74HC368D equivalent SN74HC368D replacement SN74HC368D vs 74HC368D,653 SN74HC368D 16-SOIC footprint SN74HC368D 2V 6V SN74HC368D 3-state buffer Texas Instruments SN74HC368D SN74HC368D shared bus interface SN74HC368D clock driver SN74HC368D price SN74HC368D stock

Verwandte Bauteile & Begriffe

Texas Instruments SN74HC368D SN74HC368 CD74HC368M 74HC368D,653 Nexperia USA Inc. 74HC logic CMOS logic inverting buffer line driver tri-state output 3-state output active-low output enable high-impedance state bus-oriented receiver and transmitter memory address driver clock driver dual 4-line and 2-line organization SOIC-16 surface-mount package digital bus interface propagation delay output current input transition time shared data bus
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen