Motorola

SN74LS242N - Quad Inverting Bus Transceiver | Motorola

Teilenummer: SN74LS242N ✗ Abgekündigt
14-pin PDIP Package
MOQ: 1 |

SN74LS242N Übersicht

The Motorola SN74LS242N is a quad inverting bus transceiver with four 3-state outputs in a 14-pin PDIP package. It is designed for four-line asynchronous, two-way data communication between buses and supports one transceiver element per 4-bit group. The inverting outputs allow the same interface device to provide active-low signaling and bus-driver behavior.

A bus transceiver is an interface IC that combines driver and receiver functions on a bidirectional data line. In the broader hierarchy, it belongs to the 74LS logic family, within TTL-compatible digital logic, interface ICs, and semiconductor signal-conditioning products. A quad transceiver can connect two buses through four controlled data paths, with enable control determining whether the outputs actively drive a bus or enter a high-impedance state.

The SN74LS242N provides a 4-channel, 4-bit-per-element, inverting, 3-state transceiver configuration. Each channel supports a two-way bus connection, and the three-state output capability allows multiple devices to share a bus when their drivers are disabled. Its 14-pin PDIP package is suitable for conventional through-hole assembly rather than high-density surface-mount designs.

The SN74LS242N belongs to the SN54/74LS242 function family, whose original application was asynchronous two-way communication between data buses. Unlike the SN74LS243 family member, the SN74LS242 uses inverting output behavior. This distinction must be checked carefully in bidirectional links because reversing the logic polarity can affect receiver sampling, bus arbitration, and system-level timing.

Typical uses include instrumentation buses, embedded control interfaces, legacy computer peripherals, test systems, and industrial data links that require four inverting three-state channels. The part is particularly relevant when preserving an existing 74LS-compatible board requires the original inverting transceiver function and the original 14-pin physical footprint.

For PCB integration, maintain the pin assignments shown in the manufacturer datasheet and provide adequate bypass and signal-return routing. Because the device is designed for three-state bus operation, verify both enable timing and output polarity before replacing it with a non-inverting family member. A transceiver with a different output logic function is not a functional drop-in substitute even when the package has the same pin count.

This product record combines the device identity, package information, public documentation links, sourced pricing references, and drop-in-replacement screening into an engineering-focused guide. It also distinguishes true pin-compatible choices from nearby 74LS bus devices whose enable arrangement or inversion differs, helping designers avoid a mechanically similar but electrically incompatible replacement.

Drop-in-Alternativen für SN74LS242N – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit SN74LS242N (gleiche Bauform und Footprint) – abweichend in Mounting Type.

Texas Instruments
Mounting Type: Through-hole SOIC
Vergleichen mit SN74LS242N →

SN74LS242N

✅ Drop-In
Motorola
📦 14-pin PDIP
Quad bus transceiver · 1 element · 4 channels · 4 bits · Inverting · 3-state · Asynchronous, two-way · 14-pin PDIP

Preis auf Anfrage

Datenblatt ansehen →

SN74LS242D

✅ Drop-In
Texas Instruments
📦 14-pin PDIP
Quad bus transceiver · 4 elements · 74LS · 14-pin SOIC · Through-hole SOIC · 0°C to 70°C

Preis auf Anfrage

Datenblatt ansehen →

SN74LS242D

✅ Drop-In
Texas Instruments
📦 14-pin PDIP
Quad bus transceiver · 4 elements · 74LS · 14-pin SOIC · Through-hole SOIC · 0°C to 70°C

Preis auf Anfrage

Datenblatt ansehen →

SN74LS242N Technische Daten

Device Type Quad bus transceiver
Transceiver Elements 1 element
Number of Channels 4 channels
Bits per Element 4 bits
Output Polarity Inverting
Output State 3-state
Communication Mode Asynchronous, two-way
Package Type 14-pin PDIP
Pin-Anzahl 14 pins
Montageart Through-hole
Logic Family 74LS

SN74LS242N 14-pin pdip Pinbelegungsleitfaden

Pinbelegung für SN74LS242N (14-pin pdip-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für SN74LS242N im 14-pin pdip-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für SN74LS242N.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

SN74LS242N ist geeignet für 6 Anwendungs: Bidirectional Instrument Bus Interface, Industrial Control Data Backplane, Legacy Computer Peripheral Interface, Test and Measurement Equipment, Embedded Control Communication, Long-Life Control System Repair.

🔧

Bidirectional Instrument Bus Interface

The SN74LS242N fits legacy bidirectional instrument-bus links because it combines four 3-state transceiver channels with inverting data outputs for asynchronous two-way communication. The device can be placed between two bus nodes so that one interface path supports traffic in either direction. Its three-state outputs allow the interface to release the bus when disabled, which is useful when several instruments share a common conductor. Because the outputs are inverting, system timing and receiver sampling must account for the reversed logic polarity. The manufacturer documents the SN54/74LS242 family for four-line asynchronous communication, but engineers should confirm voltage thresholds, enable timing, and termination requirements in the electrical-characteristics table before releasing a new design.

🏭

Industrial Control Data Backplane

The SN74LS242N is useful in an industrial control backplane where several controller cards must communicate through shared, two-way data lines. Four inverting 3-state channels provide a practical interface between the controller bus and a peripheral bus, while the disable function can isolate a card during maintenance or test. The 14-pin PDIP format is appropriate for legacy through-hole backplanes and facilitates manual inspection in low-volume or long-life equipment. Because 74LS bus behavior depends on correct logic polarity, timing, and pull-up arrangement, the design should use the manufacturer pin and electrical tables rather than assume that any 14-pin bus transceiver is interchangeable.

🖥️

Legacy Computer Peripheral Interface

The SN74LS242N suits repairs and expansions of legacy computer peripherals that use four-line asynchronous, two-way data communication. Its inverting transceiver channels reproduce the established 74LS interface behavior, while three-state outputs permit controlled connection to shared peripheral buses. The PDIP package allows direct mechanical consideration on an existing through-hole board, provided that pin-1 orientation, supply connections, and signal assignments match the original schematic. For long-life equipment, verify temperature range, supply tolerance, and timing margins rather than relying solely on the 74LS family name, because equivalent function labels do not guarantee identical environmental limits or production qualifications.

📺

Test and Measurement Equipment

The SN74LS242N can connect control and measurement electronics through a four-channel asynchronous two-way bus. Its 3-state outputs allow test fixtures or instrument modules to share a data path without active-driver contention when an interface is disabled. The inverting data outputs are significant: acquisition and control firmware must account for the polarity when interpreting command bytes and returned measurements. The 14-pin PDIP package is well suited to hand-built laboratory instruments and retrofit assemblies where through-hole construction simplifies rework. Confirm enable timing, logic thresholds, and bus termination with the manufacturer documentation before connecting external equipment to ensure that ringing and contention do not compromise measurement integrity.

🧩

Embedded Control Communication

The SN74LS242N can serve as an interface between embedded controller logic and a two-way peripheral bus that expects inverting 74LS signaling. Four channels support organized grouping of control lines, and the three-state output capability helps avoid bus contention during reset, firmware update, or peripheral isolation states. Its through-hole PDIP package is useful for legacy controller boards, although a compact new design may favor a surface-mount equivalent after an engineering review. The controller design should not enable a channel until the receiving device is ready, and it must preserve the documented inversion in command and response handling. Supply compatibility and timing margins require confirmation from the manufacturer electrical characteristics.

🔧

Long-Life Control System Repair

The SN74LS242N is a practical option for maintaining or cloning a long-life control system whose original schematic calls for a 14-pin quad inverting bus transceiver. The through-hole package and established 74LS architecture support board-level replacement without changing the mechanical footprint. The inverting outputs and three-state enable behavior must be checked against the original circuit because neighboring 74LS devices can implement different logic polarity or control arrangements. For repair qualification, compare every pin, supply requirement, timing parameter, and thermal condition against the original device specification, then perform bus contention and signal-integrity tests on the assembled board before returning it to service.

Zusammenfassung der empfohlenen Produkte

SN74LS242 Documented family-level bus transceiver Verwendet in: Bidirectional Instrument Bus Interface, Industrial Control Data Backplane, Test and Measurement Equipment, Long-Life Control System Repair SN74LS243 Nearby 74LS bus transceiver family for functional comparison Verwendet in: Bidirectional Instrument Bus Interface, Legacy Computer Peripheral Interface, Embedded Control Communication SN74LS242N Motorola Verwendet in: Industrial Control Data Backplane, Legacy Computer Peripheral Interface, Test and Measurement Equipment, Embedded Control Communication, Long-Life Control System Repair
What is the SN74LS242N?
The SN74LS242N is a quad inverting 3-state bus transceiver packaged in a 14-pin PDIP. According to the Motorola datasheet, the SN54/74LS242 family supports four-line asynchronous, two-way communication between data buses. The device combines four transceiver channels, with each channel handling a 4-bit group and providing inverting outputs for active-low bus signaling.
What are the key specifications of SN74LS242N that engineers should know?
The SN74LS242N is a 4-channel, inverting, 3-state bus transceiver with four bits per element in a 14-pin PDIP package. According to the Motorola datasheet description, it is intended for four-line asynchronous, two-way data-bus communication. Its three-state outputs permit multiple bus participants to share a bus when disabled, while its inverting logic must be considered during receiver and system timing design.
Where can I download the SN74LS242N datasheet PDF?
The SN74LS242N datasheet PDF can be downloaded from the manufacturer-linked document at https://www.lcsc.com/datasheet/C3757055.pdf. The document describes the SN54/74LS242 quad bus transceiver family and its use in four-line asynchronous, two-way data communications. Use the manufacturer pin-description table when assigning PCB nets and checking enable and data-line functions.
Where can I find the SN74LS242N pinout?
The SN74LS242N pinout is documented in the manufacturer datasheet for the 14-pin PDIP package. Its key architectural facts are four inverting transceiver channels, three-state outputs, and two-way asynchronous bus communication. Before assigning tracks, use the datasheet pin-description table rather than relying only on a generic 14-pin outline, because neighboring 74LS transceiver families can use different enable logic or output polarity.
What is the supply voltage of the SN74LS242N?
The SN74LS242N belongs to the SN54/74LS242 family, but the verified manufacturer document listing does not expose the supply-voltage limit or other electrical threshold values. The confirmed device configuration is a four-channel, 4-bit-per-element, inverting, 3-state transceiver in a 14-pin PDIP. Use the electrical-characteristics table in the manufacturer datasheet to set VCC, input thresholds, and system-level voltage compatibility.
Where to buy SN74LS242N online?
The SN74LS242N can be requested through the Request a Quote form on this XAIPART page. The confirmed part is a Motorola quad inverting 3-state bus transceiver in a 14-pin PDIP package. Request the exact SN74LS242N ordering code and state your required quantity, date code, and acceptable packaging so the quote can match the original assembly and sourcing requirements.
What is the price of the SN74LS242N?
Current SN74LS242N pricing is not published as a static figure on this page because market conditions and availability can change. Use the Request a Quote form on this XAIPART page for a current unit price and volume quotation. The part is identified as a four-channel, inverting, 3-state transceiver in a 14-pin PDIP, so the quotation should preserve the exact ordering code rather than substitute a nearby logic function.
What is the lead time for the SN74LS242N?
The current lead time for the SN74LS242N should be confirmed through the Request a Quote form on this XAIPART page. Stock status can vary by date code and shipment quantity, while the confirmed device configuration is a 4-channel, 3-state, inverting bus transceiver in a 14-pin PDIP. Include your production schedule and required quantity in the request to obtain a useful delivery commitment.
Is the SN74LS242N in stock?
Current SN74LS242N inventory should be checked through the Request a Quote form on this XAIPART page rather than assumed from a catalog listing. The part is a legacy-style Motorola 14-pin PDIP quad inverting 3-state transceiver. Request confirmation of the quantity available, package condition, date code, and expected dispatch timing for your production build.
SN74LS242N vs SN74LS243 - which one should be selected?
Select the SN74LS242N when the interface requires inverting transceiver outputs, and select an SN74LS243-family device only when the system requires non-inverting outputs. According to the Motorola family description, both devices address four-line asynchronous, two-way bus communication, but their output polarity differs. Changing polarity can alter receiver sampling and system timing, so the SN74LS243 is not a direct functional replacement for the SN74LS242N.
Is the SN74LS242N suitable for a bidirectional instrument bus?
The SN74LS242N is suitable for a bidirectional instrument bus when the bus protocol uses inverting signaling and requires a 74LS-compatible three-state interface. Its four channels support four-line asynchronous, two-way communication, and its outputs can be disabled to release the bus. Confirm voltage thresholds, timing, enable polarity, and pull-up requirements against the manufacturer electrical characteristics before finalizing the interface.
When should I choose the SN74LS242N over another 74LS bus transceiver?
Choose the SN74LS242N when the design requires four inverting three-state channels and a 14-pin PDIP footprint. Nearby bus transceivers may provide non-inverting outputs, different enable controls, or a different channel arrangement, making them unsuitable for a direct replacement even if their package has 14 pins. The safest selection path is to match output polarity, enable behavior, voltage compatibility, timing, and every physical connection.
What is the best drop-in replacement for the SN74LS242N?
The best drop-in replacement is a genuine second-source 74LS242 transceiver with the same 14-pin pinout, inverting outputs, three-state control, and compatible electrical characteristics. The verified replacement screening did not establish five independently documented candidates with sufficient package and parameter information. Do not substitute the non-inverting SN74LS243 merely because both devices use a 14-pin package; verify polarity and control functions first.
Can another manufacturer's 74LS242 replace the Motorola SN74LS242N?
A second-source 74LS242 can replace the Motorola SN74LS242N only after its datasheet confirms the same 14-pin assignments, inverting data paths, three-state enable behavior, supply range, and timing characteristics. The verified cross-reference material identifies the broader 74LS family but does not establish a fully documented cross-brand replacement with complete parameter data. Request a controlled second-source review rather than relying on the family name alone.
What should designers check before inserting the SN74LS242N on a legacy PCB?
Designers should check the 14-pin footprint, pin-1 orientation, data-path inversion, enable polarity, supply voltage, signal thresholds, and timing against the manufacturer datasheet. The SN74LS242N is confirmed as a four-channel, 3-state, inverting transceiver for asynchronous two-way bus communication. Because nearby 74LS transceivers can differ in inversion or enable implementation, perform a connection-by-connection comparison before approving a replacement.

Technische Referenzdaten für SN74LS242N – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the SN74LS242N when maintaining a 74LS-compatible system that requires four inverting, three-state transceiver channels in a 14-pin PDIP package. Its key advantages are the confirmed quad-channel organization, two-way asynchronous bus operation, and an established through-hole footprint for legacy or repair-oriented assemblies. Before selecting it, verify supply voltage, logic thresholds, propagation timing, temperature range, enable polarity, and every connection in the manufacturer datasheet. Do not choose it when the system requires non-inverting outputs or a different enable arrangement. Likewise, a mechanically similar SN74LS243 is not a drop-in replacement because its polarity differs. For a cross-brand sourcing decision, require a documented 14-pin 74LS242 second source and compare its electrical characteristics and production qualification against the original device.

Vergleich mit Alternativen

Parameter Dieses Produkt SN74LS242N SN74LS242 SN74LS242
Brand Motorola Texas Instruments Texas Instruments Motorola
Package 14-pin PDIP 14-pin PDIP 14-pin PDIP 14-pin PDIP
Device Type Quad bus transceiver Quad bus transceiver Quad bus transceiver Quad bus transceiver
Number of Channels 4 channels 4 channels 4 channels 4 channels
Bits per Element 4 bits 4 bits 4 bits 4 bits
Output Polarity Inverting Inverting Inverting Inverting
Output State 3-state 3-state 3-state 3-state
Communication Mode Asynchronous, two-way Asynchronous, two-way Asynchronous, two-way Asynchronous, two-way

Wichtigste Unterscheidungsmerkmale

  • Retains the original inverting three-state bus behavior (vs. SN74LS243)
  • Provides four independent bus-interface channels (vs. SN74LS242)
  • Preserves the established 14-pin PDIP footprint (vs. SN74LS242N)

Designhinweise

Do not replace the SN74LS242N with an SN74LS243-family device solely because both use a 14-pin package. The SN74LS242 has inverting outputs, so swapping it for a non-inverting transceiver reverses data behavior and can corrupt command interpretation, acknowledgments, and sampled measurements. Compare the complete pin description and truth table, including enable polarity and three-state control, before approving any substitution.

Use the manufacturer pin-description table to assign every one of the 14 PDIP connections and preserve the standard counter-clockwise package numbering around the socket or board footprint. Keep transceiver data traces short, provide a continuous ground path, and place bus-decoupling components close to the supply pins. In long backplanes, controlled impedance and appropriate termination can reduce ringing more effectively than additional logic at the receiver.

Verify that only one device actively drives a shared bus during every operating state. The three-state output allows multiple transceivers to share the line, but overlapping enable intervals can cause contention. Include control timing in system verification and test transitions from enabled to high impedance under the intended loading. Preserve the documented inversion in firmware and measurement logic.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The public part listings do not expose a specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration. AEC-Q100 is not applicable to this legacy general-purpose logic transceiver.

Ähnliche Suchanfragen

SN74LS242N datasheet SN74LS242N datasheet pdf SN74LS242N pinout SN74LS242N pin configuration SN74LS242N 14 pin PDIP Motorola SN74LS242N SN74LS242N equivalent SN74LS242N replacement SN74LS242N vs SN74LS243 SN74LS242N inverting transceiver SN74LS242N price SN74LS242N stock

Verwandte Bauteile & Begriffe

Motorola SN74LS242N SN74LS242 SN74LS243 Texas Instruments quad bus transceiver inverting transceiver three-state output 74LS logic family TTL-compatible digital logic interface IC semiconductor asynchronous two-way communication bidirectional bus 14-pin PDIP PDIP package family through-hole assembly surface mount bus contention signal integrity logic threshold propagation delay
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen