SN74LS242N - Quad Inverting Bus Transceiver | Motorola
MPN: SN74LS242N ✗ 停產SN74LS242N 概覽
A bus transceiver is an interface IC that combines driver and receiver functions on a bidirectional data line. In the broader hierarchy, it belongs to the 74LS logic family, within TTL-compatible digital logic, interface ICs, and semiconductor signal-conditioning products. A quad transceiver can connect two buses through four controlled data paths, with enable control determining whether the outputs actively drive a bus or enter a high-impedance state.
The SN74LS242N provides a 4-channel, 4-bit-per-element, inverting, 3-state transceiver configuration. Each channel supports a two-way bus connection, and the three-state output capability allows multiple devices to share a bus when their drivers are disabled. Its 14-pin PDIP package is suitable for conventional through-hole assembly rather than high-density surface-mount designs.
The SN74LS242N belongs to the SN54/74LS242 function family, whose original application was asynchronous two-way communication between data buses. Unlike the SN74LS243 family member, the SN74LS242 uses inverting output behavior. This distinction must be checked carefully in bidirectional links because reversing the logic polarity can affect receiver sampling, bus arbitration, and system-level timing.
Typical uses include instrumentation buses, embedded control interfaces, legacy computer peripherals, test systems, and industrial data links that require four inverting three-state channels. The part is particularly relevant when preserving an existing 74LS-compatible board requires the original inverting transceiver function and the original 14-pin physical footprint.
For PCB integration, maintain the pin assignments shown in the manufacturer datasheet and provide adequate bypass and signal-return routing. Because the device is designed for three-state bus operation, verify both enable timing and output polarity before replacing it with a non-inverting family member. A transceiver with a different output logic function is not a functional drop-in substitute even when the package has the same pin count.
This product record combines the device identity, package information, public documentation links, sourced pricing references, and drop-in-replacement screening into an engineering-focused guide. It also distinguishes true pin-compatible choices from nearby 74LS bus devices whose enable arrangement or inversion differs, helping designers avoid a mechanically similar but electrically incompatible replacement.
直接替換替代品,適用於 SN74LS242N — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: SN74LS242N (相同外形與佔位) — 差異在於 Mounting Type.
SN74LS242N
✅ 直接替換聯絡詢價
查看資料表 →SN74LS242D
✅ 直接替換聯絡詢價
查看資料表 →SN74LS242D
✅ 直接替換聯絡詢價
查看資料表 →SN74LS242N 規格
| Device Type | Quad bus transceiver |
| Transceiver Elements | 1 element |
| Number of Channels | 4 channels |
| Bits per Element | 4 bits |
| Output Polarity | Inverting |
| Output State | 3-state |
| Communication Mode | Asynchronous, two-way |
| Package Type | 14-pin PDIP |
| 腳位數 | 14 pins |
| 安裝類型 | Through-hole |
| Logic Family | 74LS |
SN74LS242N 14-pin pdip 腳位配置指南
SN74LS242N(14-pin pdip 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: SN74LS242N.
請參閱 資料表 以查看完整腳位配置。
典型應用
SN74LS242N 適用於 6 應用s: Bidirectional Instrument Bus Interface, Industrial Control Data Backplane, Legacy Computer Peripheral Interface, Test and Measurement Equipment, Embedded Control Communication, Long-Life Control System Repair.
Bidirectional Instrument Bus Interface
The SN74LS242N fits legacy bidirectional instrument-bus links because it combines four 3-state transceiver channels with inverting data outputs for asynchronous two-way communication. The device can be placed between two bus nodes so that one interface path supports traffic in either direction. Its three-state outputs allow the interface to release the bus when disabled, which is useful when several instruments share a common conductor. Because the outputs are inverting, system timing and receiver sampling must account for the reversed logic polarity. The manufacturer documents the SN54/74LS242 family for four-line asynchronous communication, but engineers should confirm voltage thresholds, enable timing, and termination requirements in the electrical-characteristics table before releasing a new design.
推薦
Industrial Control Data Backplane
The SN74LS242N is useful in an industrial control backplane where several controller cards must communicate through shared, two-way data lines. Four inverting 3-state channels provide a practical interface between the controller bus and a peripheral bus, while the disable function can isolate a card during maintenance or test. The 14-pin PDIP format is appropriate for legacy through-hole backplanes and facilitates manual inspection in low-volume or long-life equipment. Because 74LS bus behavior depends on correct logic polarity, timing, and pull-up arrangement, the design should use the manufacturer pin and electrical tables rather than assume that any 14-pin bus transceiver is interchangeable.
推薦
Legacy Computer Peripheral Interface
The SN74LS242N suits repairs and expansions of legacy computer peripherals that use four-line asynchronous, two-way data communication. Its inverting transceiver channels reproduce the established 74LS interface behavior, while three-state outputs permit controlled connection to shared peripheral buses. The PDIP package allows direct mechanical consideration on an existing through-hole board, provided that pin-1 orientation, supply connections, and signal assignments match the original schematic. For long-life equipment, verify temperature range, supply tolerance, and timing margins rather than relying solely on the 74LS family name, because equivalent function labels do not guarantee identical environmental limits or production qualifications.
推薦
Test and Measurement Equipment
The SN74LS242N can connect control and measurement electronics through a four-channel asynchronous two-way bus. Its 3-state outputs allow test fixtures or instrument modules to share a data path without active-driver contention when an interface is disabled. The inverting data outputs are significant: acquisition and control firmware must account for the polarity when interpreting command bytes and returned measurements. The 14-pin PDIP package is well suited to hand-built laboratory instruments and retrofit assemblies where through-hole construction simplifies rework. Confirm enable timing, logic thresholds, and bus termination with the manufacturer documentation before connecting external equipment to ensure that ringing and contention do not compromise measurement integrity.
推薦
Embedded Control Communication
The SN74LS242N can serve as an interface between embedded controller logic and a two-way peripheral bus that expects inverting 74LS signaling. Four channels support organized grouping of control lines, and the three-state output capability helps avoid bus contention during reset, firmware update, or peripheral isolation states. Its through-hole PDIP package is useful for legacy controller boards, although a compact new design may favor a surface-mount equivalent after an engineering review. The controller design should not enable a channel until the receiving device is ready, and it must preserve the documented inversion in command and response handling. Supply compatibility and timing margins require confirmation from the manufacturer electrical characteristics.
推薦
Long-Life Control System Repair
The SN74LS242N is a practical option for maintaining or cloning a long-life control system whose original schematic calls for a 14-pin quad inverting bus transceiver. The through-hole package and established 74LS architecture support board-level replacement without changing the mechanical footprint. The inverting outputs and three-state enable behavior must be checked against the original circuit because neighboring 74LS devices can implement different logic polarity or control arrangements. For repair qualification, compare every pin, supply requirement, timing parameter, and thermal condition against the original device specification, then perform bus contention and signal-integrity tests on the assembled board before returning it to service.
推薦
推薦產品摘要
工程參考資料,適用於 SN74LS242N — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | SN74LS242N | SN74LS242 | SN74LS242 |
|---|---|---|---|---|
| Brand | Motorola | Texas Instruments | Texas Instruments | Motorola |
| Package | 14-pin PDIP | 14-pin PDIP | 14-pin PDIP | 14-pin PDIP |
| Device Type | Quad bus transceiver | Quad bus transceiver | Quad bus transceiver | Quad bus transceiver |
| Number of Channels | 4 channels | 4 channels | 4 channels | 4 channels |
| Bits per Element | 4 bits | 4 bits | 4 bits | 4 bits |
| Output Polarity | Inverting | Inverting | Inverting | Inverting |
| Output State | 3-state | 3-state | 3-state | 3-state |
| Communication Mode | Asynchronous, two-way | Asynchronous, two-way | Asynchronous, two-way | Asynchronous, two-way |
主要差異化特點
- Retains the original inverting three-state bus behavior (對比SN74LS243)
- Provides four independent bus-interface channels (對比SN74LS242)
- Preserves the established 14-pin PDIP footprint (對比SN74LS242N)
設計說明
Do not replace the SN74LS242N with an SN74LS243-family device solely because both use a 14-pin package. The SN74LS242 has inverting outputs, so swapping it for a non-inverting transceiver reverses data behavior and can corrupt command interpretation, acknowledgments, and sampled measurements. Compare the complete pin description and truth table, including enable polarity and three-state control, before approving any substitution.
Use the manufacturer pin-description table to assign every one of the 14 PDIP connections and preserve the standard counter-clockwise package numbering around the socket or board footprint. Keep transceiver data traces short, provide a continuous ground path, and place bus-decoupling components close to the supply pins. In long backplanes, controlled impedance and appropriate termination can reduce ringing more effectively than additional logic at the receiver.
Verify that only one device actively drives a shared bus during every operating state. The three-state output allows multiple transceivers to share the line, but overlapping enable intervals can cause contention. Include control timing in system verification and test transitions from enabled to high impedance under the intended loading. Preserve the documented inversion in firmware and measurement logic.
合規資訊
The public part listings do not expose a specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration. AEC-Q100 is not applicable to this legacy general-purpose logic transceiver.