Texas Instruments

SN74LS685N - 8-Bit Magnitude Comparator | Texas Instruments

Teilenummer: SN74LS685N ✓ Aktiv
PDIP-20 Package
MOQ: 1 |

SN74LS685N Übersicht

The Texas Instruments SN74LS685N is an 8-bit magnitude and identity comparator with inverted logic outputs, supplied in a 20-pin PDIP package. It compares two 8-bit binary numbers and indicates whether the A input is greater than, less than, or equal to the B input. Its three comparison indications support magnitude testing, identity detection, address decoding, conditional control, and digital sorting functions. The SN74LS685N belongs to the LS series of TTL logic and operates as a dedicated combinational comparator rather than a general-purpose arithmetic processor.

A magnitude comparator is a digital logic IC that compares two multi-bit unsigned values and produces relational outputs. The SN74LS685N performs this function across two complete 8-bit input groups, reducing the need for several single-bit comparator or gate networks. Magnitude comparators sit within the broader logic-IC hierarchy, alongside arithmetic, interface, memory, and control devices. Their outputs can indicate equality as well as the direction of the numerical relationship, making them useful between data-processing blocks and system decision logic.

The defining features are an 8-bit comparison width, inverted comparison outputs, LS-series TTL implementation, and PDIP-20 mechanical package. The inverted outputs are important during logic design because active-low assertions must be treated consistently with the rest of the circuit. The NS suffix identifies the standard Texas Instruments package and commercial-temperature ordering configuration. Because the device uses a through-hole PDIP package, it can also suit educational, industrial-control, test-equipment, and legacy-computing assemblies where through-hole assembly and socketed serviceability remain practical.

The SN74LS685N provides a straightforward hardware comparison stage. Two 8-bit buses enter the comparator, while dedicated outputs report the relationship between them. This allows a system to make a decision without first subtracting the operands or comparing them sequentially in a processor. The architecture is particularly useful when a decision must be generated quickly and consistently, or when control logic must respond to equal, greater-than, and less-than conditions independently.

Typical applications include digital address decoding, equality checking in control systems, threshold decision logic, numeric sorting networks, event counters, legacy processor interfaces, and industrial automation equipment. In an address decoder, for example, the comparator can test whether a bus matches a programmed or dynamically generated value and enable the associated circuit only when equality is asserted. In test equipment, its three relational outputs can simplify fixture routing and pass-fail detection.

PCB design should preserve the logic polarity of the inverted outputs and route each 8-bit input group as a coherent bus to reduce mismatch between corresponding bits. Maintain adequate bypass capacitance at the power pins and avoid relying on the comparator outputs to source loads beyond the device's specified output-current and fan-out limits. When replacing an existing part, verify the complete pinout, supply requirements, temperature range, output timing, and propagation-delay characteristics rather than relying on the comparator function alone.

This product page combines the device identity, package details, functional hierarchy, comparison design guidance, practical applications, and drop-in replacement analysis into an engineering-focused reference for the Texas Instruments SN74LS685N 8-bit magnitude comparator.

Drop-in-Alternativen für SN74LS685N – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

SN74LS685FN

✅ Drop-In
📦 PDIP-20
Same 8-bit comparison width and three inverted relational outputs, representing a 0% functional-width difference; manufacturer and legacy timing details differ.

📋 Referenzalternative (nicht im Katalog)

DM74LS685N

✅ Drop-In
📦 PDIP-20
Same 8-bit comparator function and PDIP-20 format, representing a 0% comparison-width difference; legacy electrical and timing characteristics require confirmation.

📋 Referenzalternative (nicht im Katalog)

SN74LS685N Grenzwerte & elektrische Eigenschaften

Comparator Type 8-bit magnitude and identity comparator
Logic Family LS-series TTL
Input Data Width 8 bits per compared operand
Number of Compared Operands 2 operands
Output Polarity Inverted logic output
Package Type PDIP-20
Anzahl der Pins 20 pins
Montagestil Through-hole

SN74LS685N pdip-20 Pinbelegungsleitfaden

Pinbelegung für SN74LS685N (pdip-20-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für SN74LS685N im pdip-20-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für SN74LS685N.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

SN74LS685N ist geeignet für 6 Anwendungs: Digital Address Decoding, Equality Detection in Control Systems, Pass-Fail Test Equipment, Numeric Sorting and Threshold Logic, Legacy Processor Interface Logic, Educational and Retro Logic Systems.

🔧

Digital Address Decoding

The SN74LS685N is suitable for decoding an 8-bit address or data word because it compares two complete 8-bit operands and provides separate greater-than, less-than, and equality indications. Place the candidate address on one input group and the destination word on the other, then use the inverted equality output to qualify the associated enable or chip-select function. This hardware decision can replace a software comparison in legacy processor and peripheral-control designs. The principal design consideration is output polarity: the active-low relationship must be treated consistently with the surrounding TTL logic.

🏭

Equality Detection in Control Systems

The SN74LS685N can detect whether two 8-bit machine states are identical without cascading individual bit comparators. A controller can present its current command word and a stored reference word, then use the inverted equality indication to trigger a state transition, alarm inhibit, or actuator enable. Using one dedicated comparator simplifies the logic and reduces the number of packages required for the comparison function. For reliable operation, keep corresponding bits in the same logic family and interpret the inverted outputs according to the manufacturer truth table.

🖥️

Pass-Fail Test Equipment

The SN74LS685N provides a convenient 8-bit equality and magnitude test stage for legacy test fixtures, interface boards, and diagnostic equipment. Apply the measured or source word to one input group and the expected limit to the other; the three relational outputs then identify whether the value is below, equal to, or above the programmed reference. These indications can drive pass indicators, sorting commands, or fixture routing. Validate propagation delay and output loading at the intended clock rate before using the comparator in high-speed automated test paths.

⚡

Numeric Sorting and Threshold Logic

The SN74LS685N can form the decision element in an 8-bit sorting, ranking, or threshold system. By comparing the current value with another stored value, it provides independent less-than, equality, and greater-than indications for the next sorting stage or control action. This is particularly useful in mechanical control, batch processing, and older industrial systems where comparator ICs are preferred over programmable logic. Designers should account for the comparison propagation delay when sequencing cascaded stages, and should use consistent bus timing to prevent metastability-like sampling errors at system boundaries.

📱

Legacy Processor Interface Logic

The SN74LS685N can assist older microprocessor systems with bus-value recognition, memory-region testing, and conditional interrupt generation. Its two 8-bit input groups accommodate a complete data or address word, while the relational outputs allow the system to react immediately to a recognized condition. This reduces the software and discrete gate burden associated with wide equality detection. When interfacing a legacy processor, check output timing against the processor bus requirements, preserve the comparator's inverted output convention, and avoid excessive loading on the buses connected to the device.

🔧

Educational and Retro Logic Systems

The SN74LS685N is practical for educational breadboards, retro-computing experiments, and repairable through-hole logic projects. Students can connect two 8-bit values with switches or bus drivers and observe the three inverted comparison outputs, making the relationship between numerical magnitude and logic indication easy to visualize. The PDIP-20 format supports sockets, rework, and replacement in older assemblies. Because classic LS-series devices are not intended for modern high-speed logic, operate the comparator within its specified supply and timing limits and use clean, stable input conditions.

Zusammenfassung der empfohlenen Produkte

SN74LS685FN Legacy 8-bit comparator alternative for through-hole assemblies Verwendet in: Digital Address Decoding, Equality Detection in Control Systems, Pass-Fail Test Equipment, Numeric Sorting and Threshold Logic, Legacy Processor Interface Logic, Educational and Retro Logic Systems DM74LS685N Second-source comparator candidate for legacy designs Verwendet in: Digital Address Decoding, Equality Detection in Control Systems, Pass-Fail Test Equipment, Numeric Sorting and Threshold Logic, Legacy Processor Interface Logic, Educational and Retro Logic Systems
What is the SN74LS685N?
The SN74LS685N is an 8-bit magnitude and identity comparator with inverted logic outputs, manufactured by Texas Instruments as part of the LS-series TTL family. According to the Texas Instruments SN74LS685N datasheet, it compares two 8-bit binary operands and indicates their greater-than, less-than, and equality relationship. The device is packaged in a 20-pin PDIP configuration for through-hole assembly.
What is the operating voltage of SN74LS685N?
The SN74LS685N is a single-supply LS-series TTL comparator, but its exact allowable supply-voltage range must be confirmed in the Texas Instruments datasheet before circuit design. The functional datasheet identifies an 8-bit, three-output magnitude comparator in a PDIP-20 package. Confirm the voltage limits, input thresholds, and output-current limits for the exact temperature grade before connecting the device to a system rail.
Where can I download the SN74LS685N datasheet PDF?
The SN74LS685N datasheet is available through the Texas Instruments document archive indexed by Datasheet Archive, and an eight-page PDF is indexed on the AllDataSheet document page for TI. The manufacturer document should be the controlling source for pin assignments, electrical characteristics, and application information. Use the NS package outline when checking the physical footprint and lead dimensions.
Where can I find the SN74LS685N pinout?
The SN74LS685N pinout is documented in the manufacturer datasheet and corresponds to the 20-pin PDIP package. The indexed device description confirms that the part is an 8-bit comparator in PDIP-20, but it does not reproduce the complete numbered pin table. Use the pin-description table and package drawing in the Texas Instruments datasheet when assigning A inputs, B inputs, comparison outputs, supply, and ground.
How does the SN74LS685N compare two 8-bit values?
The SN74LS685N compares the two complete 8-bit input operands and generates separate inverted indications for greater-than, less-than, and equality. According to the Texas Instruments SN74LS685N datasheet, this dedicated architecture replaces cascaded bit-by-bit comparison logic. The three outputs can be decoded separately or combined when the control system needs to distinguish all three numerical relationships.
What can replace the SN74LS685N?
A drop-in replacement must retain the 20-pin PDIP footprint, 8-bit comparison function, and the same active-low output polarity. The SN74LS685FN from Motorola is a documented member of the same 74LS685 comparator family and is identified in the indexed 74LS685 datasheet results. Before substitution, verify its complete pinout, propagation delays, supply limits, temperature range, and output-current ratings against the original design.
Is SN74LS685N the same as SN74LS685DW?
No, the SN74LS685N and SN74LS685DW are not direct PCB drop-ins because their package formats differ. The SN74LS685N uses a 20-pin PDIP package, while the DW ordering code denotes the surface-mount package variant. They belong to the same 8-bit comparator family, so functional timing and polarity remain important, but a PCB designed for the through-hole NS suffix cannot accept the DW package without redesign.
When should I choose SN74LS685N over SN74LS685DW?
Choose the SN74LS685N when the board uses through-hole assembly, sockets the integrated circuit for service, or was designed around the 20-pin PDIP footprint. Choose the SN74LS685DW when the PCB has a compatible surface-mount footprint and smaller land pattern is required. Both ordering codes serve the 8-bit magnitude-comparison function, but their physical packages make them alternatives for different assembly technologies rather than interchangeable placements.
Is SN74LS685N suitable for industrial control and test equipment?
The SN74LS685N can suit legacy industrial-control and test-equipment logic where TTL levels, through-hole construction, and serviceable DIP packaging are important. Its 8-bit comparator function supports address matching, equality detection, routing control, and pass-fail decisions. The exact operating temperature grade and electrical limits must be checked against the manufacturer datasheet before use in temperature-extended or safety-related equipment.
What is the best cross-brand equivalent for SN74LS685N?
The best cross-brand equivalent is the part that preserves the PDIP-20 footprint, 8-bit operand width, three relational functions, and inverted output polarity. The indexed family information identifies the SN74LS685FN from Motorola as the closest documented alternative. It should not be installed solely from the function name; verify timing, supply voltage, fan-out, temperature rating, and the complete pin table before approving a second source.
What are the key specifications of SN74LS685N that engineers should know?
The principal specifications are an 8-bit comparison width, two compared operands, greater-than, less-than, and equality indications, inverted outputs, LS-series TTL logic, and a 20-pin PDIP package. These characteristics position it as a dedicated combinational logic device rather than a programmable processor. Supply limits, propagation delay, fan-out, and thermal details must be selected from the manufacturer datasheet for the exact ordering configuration.
Where can I buy SN74LS685N online?
Use the Request a Quote form on this page to request SN74LS685N availability, current commercial terms, and a suitable order quantity. The part is identified as an 8-bit LS-series TTL comparator in a PDIP-20 package, so a quotation should confirm the exact NS suffix and manufacturer. Supply status and lead time should be confirmed with each quotation rather than inferred from historical catalog information.
What is the price of SN74LS685N?
Use the Request a Quote form on this page for the current SN74LS685N unit price and volume pricing. The structured pricing data applies only when a current listing prints both the exact NS suffix and explicit quantity breaks. Because this page prioritizes an exact-MPN quotation flow, request the quantity, delivery target, and packaging requirement with your inquiry to obtain a complete commercial response.
What is the lead time for SN74LS685N?
Request the current SN74LS685N lead time through the Request a Quote form on this page and include the required quantity, date code, and delivery destination. The device is an 8-bit TTL magnitude comparator in a 20-pin through-hole package, but production timing can vary with the exact suffix, lot availability, and order quantity. A supplier response should be used for planning rather than historical availability information.
Is SN74LS685N in stock?
Current SN74LS685N stock should be confirmed through the Request a Quote form on this page. The indexed marketplace information indicates that the 8-bit PDIP-20 comparator has circulating inventory, but availability can change at the individual quantity level. Include the required order quantity and date-code preference in the request so the response reflects the intended production or maintenance demand.
How should SN74LS685N outputs be used in a digital circuit?
Treat the SN74LS685N comparison outputs as active-low signals and use the manufacturer truth table when translating them into system control logic. The three outputs separately represent greater-than, less-than, and equality relationships between the two 8-bit operands. Avoid relying on generic LED or gate assumptions, because inverted output polarity changes how enable, reset, fault, and routing signals should be combined.

Technische Referenzdaten für SN74LS685N – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the SN74LS685N when maintaining or designing a through-hole system that requires an 8-bit magnitude and identity comparator with inverted outputs. Its PDIP-20 format supports sockets, hand assembly, and straightforward service in legacy industrial, test, educational, and processor-interface equipment. The SN74LS685FN is a close legacy-family alternative for a board already qualified around that second-source device. The DM74LS685N is another through-hole comparator candidate, but its electrical characteristics and timing should be checked against the Texas Instruments part before production use. The SN74LS685DW is appropriate only when the PCB is designed for the corresponding surface-mount footprint; it is not a physical replacement for the NS package. Regardless of the selected ordering code, verify the complete pinout, supply range, output polarity, propagation delay, temperature rating, fan-out, and output-current limits before approving a replacement.

Vergleich mit Alternativen

Parameter Dieses Produkt SN74LS685FN DM74LS685N
Package PDIP-20 PDIP-20 PDIP-20
Brand Texas Instruments Motorola, Inc Motorola, Inc
Comparison Width 8 bits 8 bits 8 bits
Comparator Function Magnitude and identity comparator Magnitude and identity comparator Magnitude and identity comparator
Output Polarity Inverted Inverted Inverted
Logic Family LS-series TTL 74LS-series TTL 74LS-series TTL
Mounting Style Through-hole Through-hole Through-hole
Number of Pins 20 pins 20 pins 20 pins

Wichtigste Unterscheidungsmerkmale

  • Dedicated 8-bit relational comparison (vs. SN74LS685FN)
  • Matching active-low output convention (vs. DM74LS685N)
  • Serviceable 20-pin through-hole implementation (vs. SN74LS685DW)

Designhinweise

Route each 8-bit input group as a matched bus and keep the two compared words synchronized at the device pins. Corresponding bits should have comparable rise and fall behavior to avoid presenting the comparator with unequal switching thresholds. Place any upstream bus buffers close enough to the SN74LS685N that transmission-line reflections and capacitive loading do not distort the relationship between the two operands.

The SN74LS685N uses inverted comparison outputs, so a designer who assumes active-high equal, greater-than, and less-than indications can invert the complete system decision. Build the polarity relationship directly from the manufacturer truth table and label the nets accordingly. Also confirm that the 20-pin NS package matches the board footprint; the DW family member has a different surface-mount package and is not a physical drop-in replacement.

Decouple the power supply at the comparator with the capacitance and placement specified by the manufacturer guidance for this package and operating environment. Keep switching-current return paths away from the input and output traces, especially when the device is mounted near relays, motor-control stages, or clocked logic. Confirm input levels against the actual LS-series thresholds because a 5 V-looking signal does not automatically satisfy every legacy TTL input specification.

Use the manufacturer's PDIP-20 land pattern and verify lead pitch, row spacing, drill size, and silkscreen orientation against the physical device before fabrication. A socket can improve serviceability in legacy equipment, but the selected socket must be electrically and mechanically suitable for the device's power and operating temperature. Avoid placing tall jumper wires or connectors where they can interfere with socketed replacement.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

No specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement is identified for this exact ordering configuration. AEC-Q100 is not applicable unless a separate automotive-qualified ordering option is selected.

Daten verifiziert am: 2026-11-19 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

SN74LS685N datasheet SN74LS685N pinout SN74LS685N datasheet pdf SN74LS685N replacement SN74LS685N equivalent SN74LS685N cross reference Texas Instruments SN74LS685N SN74LS685N 8-bit comparator SN74LS685N PDIP-20 SN74LS685N vs SN74LS685DW SN74LS685N address decoder SN74LS685N price SN74LS685N stock where to buy SN74LS685N SN74LS685N magnitude comparator application circuit

Verwandte Bauteile & Begriffe

Texas Instruments SN74LS685N SN74LS685FN DM74LS685N SN74LS685DW magnitude comparator identity comparator digital comparator combinational logic logic IC TTL LS-series TTL 8-bit comparator inverted output active-low logic PDIP-20 through-hole package surface-mount package address decoding industrial control test equipment legacy processor interface propagation delay power supply decoupling
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen