Texas Instruments

SN75116N - Differential Line Transceiver | Texas Instruments

Teilenummer: SN75116N ✓ Aktiv
5 V Vdss 16-pin PDIP Package
MOQ: 1 |

SN75116N Übersicht

Texas Instruments SN75116N is a single differential line transceiver containing one 3-state driver and one receiver, operates from a single 5 V supply, and is packaged in a 16-pin PDIP. The device interfaces TTL-type digital systems with differential data-transmission lines and is intended primarily for party-line or data-bus arrangements where multiple nodes can share a bus. Its specified operating-temperature range is 0 to 70 °C.

A differential line transceiver is an interface IC that converts between single-ended TTL logic and a differential line signal. This signal hierarchy belongs to the broader sequence of transceiver, interface IC, semiconductor, and electronic communication systems. Differential signaling helps reject common-mode noise because the receiver evaluates the voltage difference between two conductors rather than one conductor referenced only to ground. The SN75116N therefore fits between a bus controller or terminal logic and a physical differential bus.

Key features include a single 5 V supply, TTL-compatible driver inputs, TTL-compatible receiver outputs, and a 3-state driver output that allows a connected node to release the bus when inactive. The integrated driver and receiver reduce the number of external interface components needed in a party-line topology. The 16-pin PDIP package also supports conventional through-hole assembly and prototyping workflows. Driver and receiver timing, propagation delay, and bus loading remain important system-level considerations when this device is added to an existing bus.

The SN75116N is intended for TTL-to-differential line conversion in party-line data buses. Its 3-state driver supports shared-bus arrangements, while the differential receiver improves noise immunity over a direct single-ended connection. Designers should account for propagation delay, bus termination, cable length, node stub effects, and the voltage margins required by the connected TTL devices. Because the device combines one driver and one receiver, system partitioning may require additional transceivers to balance each node's transmit and receive paths.

Typical uses include industrial control buses, instrumentation interfaces, point-to-point differential links, and legacy TTL equipment connected to balanced cabling. The device is also appropriate for laboratory prototypes and repair systems that need a straightforward 16-pin through-hole interface. In every case, the selected cables, connectors, grounding method, and logic family must preserve the voltage thresholds and signal timing expected by the bus.

A key implementation consideration is the receiver control function associated with this transceiver family. Confirm the exact control-pin behavior and timing from the manufacturer datasheet before substituting a related family member. When the PCB footprint must remain unchanged, the SN75116N should be treated as a design-specific component rather than replaced solely because another differential transceiver has similar headline features.

This page combines the manufacturer's product identity, exact ordering package, commercial sourcing path, functional comparisons, and practical interface-design guidance. It also identifies where timing, pin-level, compliance, and alternative-device details require direct verification before schematic release or PCB reuse.

Drop-in-Alternativen für SN75116N – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit SN75116N (gleiche Bauform und Footprint) – abweichend in Mounting Type, Operating Temperature Range, Package, Primary Application, Product Type.

Texas Instruments
Mounting Type: Surface Mount
Operating Temperature Range: 0 C to 70 C
Package: 16-pin SOIC (D)
Vergleichen mit SN75116N →
Texas Instruments
Package: PDIP (N), 16 pins
Primary Application: Party-line and data-bus interfacing
Product Type: Differential line transceiver
Vergleichen mit SN75116N →

SN75118N

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Texas Instruments
📦 16-pin PDIP
Differential line transceiver · 5 V · TTL-compatible · TTL-compatible · 3-state · Differential · Enable input · Party-line and data-bus interfacing

Preis auf Anfrage

Datenblatt ansehen →

SN55116N

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 16-pin PDIP
Retains the 16-pin PDIP footprint and 5 V differential transceiver function; temperature grade differs from the SN75116N 0 to 70 °C range, with the exact range delta listed as

📋 Referenzalternative (nicht im Katalog)

SN75116N Technische Daten

Device Type Single differential line transceiver
Transceiver Configuration 1 transmitter and 1 receiver
Versorgungsspannung 5 V
Driver Input Compatibility TTL-compatible
Receiver Output Compatibility TTL-compatible
Driver Output State 3-state
Signal Type Differential line
Primary Application Party-line and data-bus communication
Package Type 16-pin PDIP
Pin-Anzahl 16 pins
Montageart Through-hole
Betriebstemperaturbereich 0 °C to 70 °C

SN75116N 16-pin pdip Pinbelegungsleitfaden

Pinbelegung für SN75116N (16-pin pdip-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für SN75116N im 16-pin pdip-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für SN75116N.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

SN75116N ist geeignet für 6 Anwendungs: Legacy TTL Party-Line Data Bus, TTL-to-Differential Instrumentation Interface, Industrial Control Bus Interface, Point-to-Point Balanced Data Link, Laboratory Data Acquisition Backplane, Legacy Equipment Repair and Retrofit.

🌐

Legacy TTL Party-Line Data Bus

The SN75116N fits a legacy party-line bus because it combines one 3-state differential driver and one receiver in a single 5 V package. The driver can place the line in a high-impedance state when the node is inactive, while the receiver recovers the differential signal as a TTL-compatible logic output. This arrangement reduces the external component count for equipment that shares one bus among multiple nodes. The designer must verify termination, node stub length, receiver-control polarity, and propagation delay against the actual bus timing before installation.

🔧

TTL-to-Differential Instrumentation Interface

The SN75116N can bridge TTL instrumentation logic and a balanced data line when noise immunity and bus participation are more important than compact packaging. Its single 5 V supply matches many legacy digital systems, and the TTL-compatible driver inputs and receiver outputs simplify the digital boundary. Place the transceiver near the line connector to minimize unbalanced stub length, then validate grounding, cable termination, logic thresholds, and signal timing under the worst-case noise and loading conditions.

🏭

Industrial Control Bus Interface

The SN75116N is appropriate for a 5 V industrial control interface that uses differential line signaling and conventional TTL logic. The 3-state driver permits controlled connection to a shared bus, and the differential receiver helps reduce susceptibility to common-mode noise found near control equipment. Its specified 0 to 70 °C range must remain within the enclosure's temperature limits. Validate isolation strategy, surge exposure, cable length, termination, and grounding before using the device on long industrial wiring.

💻

Point-to-Point Balanced Data Link

For a short point-to-point link, the SN75116N provides a straightforward path from TTL logic to a differential pair and back to TTL-compatible logic. The 16-pin PDIP format simplifies assembly on legacy or prototype boards, while its integrated driver and receiver reduce board area compared with separate line-driver and receiver devices. Keep both logic-side traces short and away from the cable connection, observe the manufacturer's output and receiver thresholds, and confirm that the selected cable and termination method satisfy the target data rate.

🖥️

Laboratory Data Acquisition Backplane

The SN75116N can connect laboratory acquisition hardware to a shared differential backplane when the system operates from 5 V and uses TTL-compatible control signals. The receiver provides a convenient single-ended logic output, while the 3-state driver allows an instrument or peripheral to join or leave the bus selectively. Through-hole packaging is useful for prototype and repair platforms. Establish a defined reference ground, use controlled bus impedance, minimize connectors and stubs, and test every node for contention before beginning data acquisition.

🔧

Legacy Equipment Repair and Retrofit

The SN75116N is well suited to repairing or retrofitting older equipment that uses a 16-pin PDIP differential transceiver. The through-hole package supports conventional soldering and socket-based diagnostics, while the 5 V supply and TTL-compatible logic levels align with many vintage bus designs. Before installing it, compare the complete pin-description table, control polarity, propagation delays, receiver thresholds, and output-state behavior with the failed device. A working substitute must match the original electrical role, not merely the transceiver description.

Zusammenfassung der empfohlenen Produkte

What is the SN75116N?
The SN75116N is a Texas Instruments differential line transceiver containing one 3-state driver and one receiver for TTL-to-differential bus interfacing. According to the manufacturer product page, it operates from a single 5 V supply, provides TTL-compatible driver inputs and receiver outputs, and is offered in a 16-pin PDIP package. Its primary role is connecting conventional TTL logic to a differential data line, particularly in party-line or shared-bus systems.
Where can I download the SN75116N datasheet PDF?
The official SN75116 documentation is available through Texas Instruments' SN75116 product page at https://www.ti.com/product/SN75116. The manufacturer datasheet is the controlling source for the complete pin description, propagation delays, receiver thresholds, electrical characteristics, and recommended operating conditions. Use the ordering-information section to confirm that SN75116N corresponds to the 16-pin PDIP package with a 0 to 70 °C operating-temperature range.
What are the key specifications of SN75116N that engineers should know?
The SN75116N combines one differential driver and one receiver in a 16-pin PDIP package, operates from a single 5 V supply, and supports a 0 to 70 °C temperature range. According to the Texas Instruments product documentation, its driver inputs and receiver outputs are TTL-compatible, while the driver uses a 3-state output for shared-bus applications. Exact propagation delay, receiver sensitivity, and output-level limits should be taken from the manufacturer datasheet.
What does the SN75116N pinout look like?
The SN75116N uses a 16-pin PDIP footprint, but the manufacturer datasheet is required to assign every pin accurately. Do not infer the receiver-control, enable, supply, ground, driver, or receiver connections from generic 16-pin transceiver diagrams. The visible page does not reproduce the full numbered pin-description table; use the pin-description table in the Texas Instruments datasheet and the PDIP-16 package drawing when assigning PCB tracks or checking an assembled board.
Where can I buy SN75116N online?
Use the Request a Quote form on this page to request SN75116N pricing, stock confirmation, minimum order quantity, and delivery information from XAIPART. The part is a Texas Instruments differential line transceiver in a 16-pin PDIP package, with a manufacturer-specified operating range of 0 to 70 °C. Providing the required quantity, package, and target date in the request helps establish an accurate commercial quotation.
What is the price of SN75116N?
Current SN75116N pricing is obtained through the Request a Quote form on this page rather than a static price statement. Submit the required quantity and any target delivery date to obtain a current quotation in the requested currency. The device is the 16-pin PDIP ordering option of the SN75116 differential line transceiver family, with a 0 to 70 °C operating-temperature range and a single 5 V supply.
What is the lead time for SN75116N?
Request the current SN75116N lead time through the Request a Quote form on this page. Lead time depends on the quantity ordered, available inventory, and manufacturing status, so it should be confirmed for the exact 16-pin PDIP MPN rather than assumed for the broader SN75116 family. Include your order forecast and target receiving date so the commercial response can reflect the planned build.
Is SN75116N in stock?
Stock availability for the exact SN75116N should be confirmed through the Request a Quote form on this page. The manufacturer identifies SN75116N as the N-package option with 16 pins and a 0 to 70 °C operating-temperature range. Request quantity-specific availability rather than relying on family-level stock information, and provide the reel, tube, or other delivery requirement applicable to your production plan.
SN75116N versus SN75118N: which is better for a shared data bus?
The SN75116N is the better choice when the original circuit requires the exact SN75116 receiver-control behavior and 16-pin PDIP layout, because SN75118N changes the family control function and must be checked at the pin and timing level. According to Texas Instruments family information, the SN75116, SN75117, SN75118, and SN75119 devices share basic driver and receiver concepts but differ in control functions and package size. A schematic comparison is essential before replacement.
What is the difference between SN75116N and SN75116NSR?
SN75116N and SN75116NSR represent different package options within the SN75116 family, so their physical mounting requirements are not interchangeable without a PCB change. SN75116N is the 16-pin PDIP ordering option specified for 0 to 70 °C operation. A surface-mount ordering suffix would require a different land pattern, exposed thermal or lead-frame details, and assembly-process review rather than a simple drop-in substitution.
When should I choose SN75116N over another differential transceiver?
Choose SN75116N when the design specifically needs a single 5 V differential line transceiver with one 3-state driver, one receiver, TTL-compatible interfaces, and a 16-pin PDIP footprint. It is especially practical for legacy through-hole equipment, prototypes, and bus interfaces that must preserve the established receiver-control arrangement. Select a different member of the SN75116 family only after confirming that its enable or strobe behavior, timing, and package meet the circuit requirements.
Is SN75116N suitable for industrial party-line bus applications?
The SN75116N is suitable for a legacy 5 V TTL party-line or data-bus interface when its 0 to 70 °C operating range covers the equipment environment. Its differential driver and receiver support noise-tolerant balanced signaling, while the 3-state driver permits a node to disconnect from a shared bus. For an installation requiring extended industrial temperature limits, wider supply tolerance, or modern high-speed signaling, verify the complete electrical requirements before releasing the design.
What can replace SN75116N?
The closest supported replacement is a device with the same 16-pin PDIP footprint, 5 V supply, differential driver and receiver functions, compatible control-pin arrangement, and compatible timing. Related SN75116-family members may differ in receiver strobe or enable behavior, and package suffixes may change from PDIP to a surface-mount form. Use the Texas Instruments cross-reference search and compare the manufacturer datasheets before treating any candidate as a true drop-in replacement.
What is the best Texas Instruments equivalent for SN75116N?
The closest Texas Instruments family candidate is SN75118N because it belongs to the same differential line transceiver group and retains the larger 16-pin-style implementation, while its control function differs from SN75116N. That difference matters if the receiver strobe or enable is connected to external logic. The SN75116N remains the preferred selection when exact receiver-control behavior and uninterrupted PDIP assembly are required; do not substitute solely from the family name.
Is SN75116N the same as SN75116NSR?
No. SN75116N and SN75116NSR share the core SN75116 transceiver function but use different package ordering options, with SN75116N identified as the 16-pin PDIP version. They are not physical drop-in equivalents because their PCB land patterns and assembly methods differ. Confirm electrical and timing compatibility separately, but treat the package difference as a design-changing constraint when moving from PDIP to a surface-mount implementation.

Technische Referenzdaten für SN75116N – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose SN75116N when rebuilding or extending a legacy 5 V TTL party-line system that specifically uses the SN75116 receiver-output-strobe arrangement and a 16-pin PDIP footprint. Its 3-state differential driver, TTL-compatible logic interfaces, and single 5 V supply provide a direct fit for established through-hole bus designs. Consider SN75118N only when the schematic and timing review confirm that the receiver-enable behavior satisfies the circuit; its control function is not interchangeable merely because the family and package match. Consider SN55116N when its different temperature grade is justified by the operating environment and its complete electrical characteristics have been compared. Do not use SN75116NSR as a physical drop-in for a PDIP design. For any new high-speed, extended-temperature, or isolated bus, evaluate a transceiver explicitly specified for those requirements rather than extrapolating from the legacy SN75116 family.

Vergleich mit Alternativen

Parameter Dieses Produkt SN75118N SN55116N
Package 16-pin PDIP 16-pin PDIP 16-pin PDIP
Brand Texas Instruments Texas Instruments Texas Instruments
Device Type Differential line transceiver Differential line transceiver Differential line transceiver

Wichtigste Unterscheidungsmerkmale

  • Matches the established 16-pin through-hole party-line interface (vs. SN75118N)
  • Provides the specified commercial temperature grade for legacy equipment (vs. SN55116N)
  • Combines a 3-state driver and receiver in one package (vs. SN75118N)

Designhinweise

Place the SN75116N close to the differential-line connector and keep the two line conductors as a routed pair. Minimize the distance between the transceiver line pins and the connector, avoid stubs, and keep the unbalanced TTL-side traces away from the cable exit. Confirm that the PCB provides the exact 16-pin PDIP footprint and verify every numbered pin against the Texas Instruments datasheet before fabrication.

Do not treat a related SN75116-family IC as interchangeable without checking receiver-control polarity and timing. The SN75116N uses a receiver-output-strobe arrangement, while the SN75118N family member uses an enable function. Also avoid assuming that a surface-mount ordering suffix is a drop-in replacement: package drawings, land patterns, and assembly requirements differ between PDIP and surface-mount options.

Define the bus topology, characteristic impedance, termination method, maximum cable length, and permitted stub length before layout. Use a 3-state strategy that prevents multiple nodes from driving the line simultaneously. Verify propagation delay, receiver thresholds, and logic setup time against the slowest attached device, particularly when the transceiver sits between physically separated nodes.

Route the 5 V supply and ground connections directly to the transceiver with minimal loop area, and place the manufacturer's recommended bypass capacitor close to the device. Use the datasheet's absolute maximum and recommended operating conditions as the electrical limits. If the transceiver is mounted near long cables or switching equipment, assess common-mode voltage, ground offset, and ESD protection at the connector rather than assuming logic-level protection is sufficient.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The legacy SN75116 family is an interface IC rather than an automotive-qualified product. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations must be confirmed from the current Texas Instruments product or material-compliance documentation.

Daten verifiziert am: 2026-11-09 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

SN75116N datasheet SN75116N pinout SN75116N datasheet pdf SN75116N equivalent SN75116N replacement SN75116N cross reference SN75116N vs SN75118N SN75116N PDIP-16 footprint SN75116N 5V transceiver SN75116N party-line bus Texas Instruments SN75116N SN75116N price SN75116N stock SN75116N lead time

Verwandte Bauteile & Begriffe

Texas Instruments SN75116N SN75118N SN55116N SN75116NSR differential line transceiver differential line driver differential receiver interface IC semiconductor TTL 3-state output party-line data bus single-ended logic differential signaling common-mode noise receiver output strobe receiver enable PDIP-16 through-hole package 5 V power supply bus termination propagation delay signal integrity RoHS REACH
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen