Texas Instruments

SN75154D - Quad RS-232 Receiver | Texas Instruments

Teilenummer: SN75154D ✓ Aktiv
5 V Vdss 7 kΩ Rds(on) SOIC-16 (D) Package
MOQ: 1 |

SN75154D Übersicht

Texas Instruments SN75154D is a monolithic quadruple differential RS-232 line receiver with four independent receiver channels, a nominal 5 V supply, operation from 0°C to 70°C, and a 16-pin SOIC package. The device implements the receiver side of the EIA/TIA-232-E interface and is intended for data-terminal and data-communication equipment connections.

A differential line receiver is an interface IC that converts a pair of bipolar data-line voltages into a logic-level output. In the broader hierarchy, a line receiver belongs to an interface IC, a communications transceiver, and ultimately a semiconductor. The SN75154D is designed for relatively short, single-line, point-to-point interfaces where noise immunity, adjustable input thresholds, and fail-safe behavior are more important than the bidirectional functions provided by a full RS-232 transceiver.

The SN75154D provides four receiver channels, a 7 kΩ input resistance, adjustable input thresholds for fail-safe operation, and compatibility with the EIA/TIA-232-E voltage range. Its maximum data rate is 1 Mbit/s, making it suitable for conventional RS-232 links and other point-to-point signaling paths. The 5 V to 5.5 V supply range also supports integration with common 5 V digital systems.

The monolithic Schottky implementation combines four receivers in one package while maintaining the voltage thresholds expected by RS-232 equipment. Each differential input accepts an external signal pair and generates a corresponding logic output. Adjustable thresholds allow a system to bias the receiver toward a known state when the line is undriven, supporting fail-safe interface behavior without relying solely on external components.

Typical uses include industrial serial links, point-to-point data equipment, peripheral interfaces, embedded control systems, and legacy RS-232 test equipment. The device can also work with a separate line driver in systems that require transmission and reception but do not need a single combined transceiver package.

For reliable implementation, maintain the voltage limits and input-threshold conditions specified by the manufacturer datasheet, place bypass capacitance close to the supply pins, and route differential inputs to minimize differential pickup. Because the SN75154D provides receivers only, a suitable line driver is required wherever the same equipment must transmit over the RS-232 interface.

This page combines package, interface, application, and design guidance with drop-in comparison information. It also identifies the key electrical parameters that should be checked before replacing an existing quadruple differential line receiver, helping engineers evaluate footprint compatibility, signal logic, supply voltage, temperature range, and fail-safe threshold behavior together.

Drop-in-Alternativen für SN75154D – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit SN75154D (gleiche Bauform und Footprint) – abweichend in Package, Operating Temperature Range, Internal Technology, Product Type, Supply Voltage Range.

Texas Instruments
Package: 8-pin SOIC, 3.90 mm width
Operating Temperature Range: 0 °C to 70 °C
Internal Technology: Schottky circuitry
Vergleichen mit SN75154D →
Texas Instruments
Package: 8-pin SOIC (D)
Product Type: Dual differential line driver
Vergleichen mit SN75154D →

SN75152D

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 SOIC-16 (D)
Receiver count remains 4, a 0% channel-count difference; input-threshold and fail-safe behavior differ from SN75154D and require pin-table verification.

📋 Referenzalternative (nicht im Katalog)

SN75153D

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 SOIC-16 (D)
Receiver count remains 4, a 0% channel-count difference; the fail-safe threshold implementation differs from SN75154D.

📋 Referenzalternative (nicht im Katalog)

SN75156D

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 SOIC-16 (D)
Four receivers are retained, a 0% channel-count difference; operating-threshold and family-specific electrical characteristics differ.

📋 Referenzalternative (nicht im Katalog)

SN75157D

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Texas Instruments
📦 SOIC-16 (D)
Dual differential line receiver · 2 channels · 0 channels · 5 V · 4.75 V to 5.25 V · 10 Mbit/s · Differential or single-ended inputs · TTL-compatible outputs

Preis auf Anfrage

Datenblatt ansehen →

SN75158D

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Texas Instruments
📦 SOIC-16 (D)
Dual differential line driver · 2 · 5 V · 10 Mbit/s · RS-422 / ANSI EIA/TIA-422-B / ITU V.11 · TTL totem-pole differential output · High impedance · 0°C to 70°C

Preis auf Anfrage

Datenblatt ansehen →

SN75154D Technische Daten

Product Type Quadruple differential RS-232 line receiver
Receiver Channels 4 channels
Logic Levels 4 output channels
Maximum Data Rate 1 Mbit/s
Nominal Supply Voltage 5 V
Supply Voltage Range 5 V to 5.5 V
Minimum Logic Voltage 5 V
Input Resistance 7 kΩ
Betriebstemperaturbereich 0°C to 70°C
Gehäuse SOIC-16 (D)
Pin-Anzahl 16 pins
Montageart Surface mount
Interface Standard ANSI EIA/TIA-232-E
Recommendation ITU V.28
Input Threshold Adjustable for fail-safe operation
Internal Technology Monolithic low-power Schottky line receiver
ESD HBM Rating 0 kV
RoHS-Status Compliant

SN75154D soic-16 (d) Pinbelegungsleitfaden

Pinbelegung für SN75154D (soic-16 (d)-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für SN75154D im soic-16 (d)-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für SN75154D.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

SN75154D ist geeignet für 6 Anwendungs: Industrial RS-232 Point-to-Point Links, Data-Terminal and Communication Equipment, Embedded Control and Peripheral Interfaces, Legacy Serial Port Consolidation, Instrumentation and Test Equipment, Fail-Safe Serial Command Interfaces.

🏭

Industrial RS-232 Point-to-Point Links

The SN75154D fits equipment that receives RS-232 signals over short, point-to-point links and requires four receiver channels on a common 5 V rail. Its four differential inputs, 5 V to 5.5 V operating range, and 1 Mbit/s maximum data rate support conventional data-terminal and data-communication interfaces. Adjustable input thresholds can establish predictable fail-safe output states when a cable is disconnected. A separate line driver is required for the transmit path, while the receiving system should account for cable length, ground reference, and threshold selection.

🌐

Data-Terminal and Communication Equipment

The SN75154D is designed for the data-terminal and data-communication interface defined by ANSI EIA/TIA-232-E, making it appropriate for equipment that exchanges legacy serial signals with a host system. Four receiver channels allow several independently wired links to share one package. The 7 kΩ input resistance and adjustable threshold capability provide defined operating behavior across the EIA/TIA-232-E input-voltage range. Board-level implementation should preserve the recommended input network and provide local supply bypassing to minimize coupling between adjacent channels.

🔧

Embedded Control and Peripheral Interfaces

The SN75154D can receive four differential serial signals in an embedded controller or peripheral subsystem that retains compatibility with RS-232 equipment. Its 16-pin SOIC package is practical for compact mixed-signal boards, while the 5 V supply and logic levels align with conventional digital control systems. The 1 Mbit/s capability provides ample margin for many control and status channels. Because the device receives only, the system must include a separate transmitter when command information must travel back over the interface.

🖥️

Legacy Serial Port Consolidation

The SN75154D is useful when four legacy serial receivers must be consolidated into one interface IC without introducing a mixed transceiver footprint. Its four independent differential receiver channels offer a direct way to distribute incoming RS-232 signals to digital logic. The 16-pin SOIC package allows placement beside a controller or connector, but differential input routing should remain short and appropriately terminated. Verify connector-side voltage protection independently because the receiver specification and external transient protection requirements are separate design constraints.

🔧

Instrumentation and Test Equipment

The SN75154D suits instrumentation that must acquire several low-speed or moderate-speed differential control signals from remote test equipment over RS-232-compatible wiring. Four channels reduce the number of receiver packages required for a multi-axis or multi-instrument interface, and the specified 1 Mbit/s rate supports many status and control links. Adjustable thresholds are useful when defining behavior for an open cable. Confirm the 0°C to 70°C operating range against the intended enclosure temperature and provide stable 5 V regulation close to the device.

🛡️

Fail-Safe Serial Command Interfaces

The SN75154D is appropriate for command interfaces where a disconnected cable must leave each receiver in a defined state. Its adjustable input thresholds allow the system to bias the differential receiver inputs toward fail-safe operation rather than relying only on an external network. Four channels support multiple command or interlock lines while retaining the 16-pin SOIC footprint and 5 V operation. Threshold components should be selected from the manufacturer guidance, and system tests should cover unplugged, shorted, noisy, and powered-but-inactive cable conditions.

What is the SN75154D and what does it do?
The SN75154D is a Texas Instruments monolithic quadruple differential line receiver designed for RS-232 interfaces. It contains four independent receiver channels, operates from a 5 V to 5.5 V supply, and provides one logic output for each differential input pair. According to the Texas Instruments SN75154 datasheet, the device is intended for the receiver side of EIA/TIA-232-E data-terminal and data-communication interfaces.
What is the operating voltage of SN75154D?
The SN75154D operates from 5 V to 5.5 V with a nominal supply of 5 V. This operating range allows the four receiver channels to interface directly with conventional 5 V digital logic. The Texas Instruments SN75154 datasheet also identifies a 5 V minimum logic voltage. Confirm that every downstream device connected to the receiver outputs uses compatible 5 V logic levels before replacing an existing interface circuit.
Where can I download the SN75154D datasheet PDF?
The official SN75154D datasheet can be downloaded from the Texas Instruments document link on this page or from the manufacturer's SN75154 product page. The datasheet describes the quadruple differential receiver, its EIA/TIA-232-E and ITU V.28 relationship, input resistance, adjustable thresholds, package information, and operating characteristics. Use the manufacturer document for final pin assignments, recommended application circuits, and absolute-maximum ratings.
Where can I find the SN75154D pinout?
The SN75154D uses a 16-pin SOIC package, and its authoritative pin assignment is shown in the Texas Instruments SN75154 datasheet. Use the pin-description table and package drawing when assigning PCB tracks, bypassing the supply, and connecting the four differential receiver inputs. The product-page ordering information identifies the SN75154D package as SOIC (D) with 16 pins and a 0°C to 70°C temperature range.
What is the maximum data rate of SN75154D?
The SN75154D supports a maximum data rate of 1 Mbit/s. That rating applies to the receiver's specified signaling performance and should be checked against cable length, baud rate, rise time, and the voltage thresholds of the connected transmitter. According to the Texas Instruments SN75154 datasheet, the device also satisfies the relevant EIA/TIA-232-E input requirements and supports adjustable fail-safe thresholds.
Is SN75154D in stock and what is its lead time?
Current stock and manufacturing lead time for SN75154D should be confirmed through the Request a Quote form on this page. The form lets buyers request current availability, order quantities, and delivery timing for the exact 16-pin SOIC device. This avoids presenting temporary channel inventory or an estimated lead time as a firm commitment for production procurement.
Where can I buy SN75154D online?
Use the Request a Quote form on this page to request SN75154D availability, lead time, and ordering information for the exact Texas Instruments 16-pin SOIC package. The manufacturer identifies SN75154D as a quadruple differential line receiver, so a request based on the complete MPN helps prevent substitution of a related device with different package, temperature, or threshold characteristics.
What is the price of SN75154D?
Use the Request a Quote form on this page for the current SN75154D price and volume-break information. Quotation confirms the exact manufacturer part number, package, order quantity, and current commercial terms. The SN75154D designation specifically identifies the 16-pin SOIC version, so pricing requests should include the full suffix to avoid mismatches with other package or reel-ordering variants.
What is the difference between SN75154D and SN75152D?
The SN75154D is a quadruple differential receiver with adjustable fail-safe thresholds, while the SN75152D is a related quadruple line-receiver family device with different threshold and fail-safe characteristics. Both provide four receiver channels and use a 16-pin SOIC option. The Texas Instruments family documentation should be checked for exact logic polarity and threshold differences before treating one as a functional equivalent.
When should I choose SN75154D over SN75154DR?
Choose SN75154D when the 16-pin SOIC package and its specified ordering format meet the assembly requirement. SN75154DR represents the tape-and-reel ordering form of the same TI device family rather than a materially different receiver. If production volume, moisture handling, and placement method require reel packaging, confirm the exact orderable suffix with the Request a Quote form before committing the bill of materials.
What can replace SN75154D on the same PCB footprint?
A valid SN75154D replacement must use the same 16-pin SOIC footprint and preserve the four-channel differential receiver pin arrangement, 5 V logic, signal polarity, and threshold behavior. The listed family alternatives provide same-package starting points, but engineers must compare the manufacturer pin tables and electrical limits before substitution. Do not use a transceiver containing drivers unless its complete pinout and electrical behavior are verified.
Is SN75154D suitable for RS-232 industrial equipment?
The SN75154D is suitable for the receiver portion of a conventional RS-232 point-to-point interface when the equipment operates within 0°C to 70°C. Its four channels, 1 Mbit/s maximum data rate, and adjustable thresholds support multi-channel data-terminal and data-communication equipment. The Texas Instruments datasheet must be consulted for line protection and application-specific voltage limits.
Can SN75154D receive data when the RS-232 line is idle?
The SN75154D provides adjustable input thresholds that can bias its receiver outputs for fail-safe operation when the line is undriven. This feature is valuable in systems where a disconnected or idle cable must produce a defined logic state rather than uncontrolled switching. Set the threshold network using the Texas Instruments application guidance and verify the resulting output state across temperature and supply tolerance.
What are the key specifications of SN75154D that engineers should know?
The principal SN75154D specifications are four differential receiver channels, a 16-pin SOIC package, a 5 V to 5.5 V supply range, 1 Mbit/s maximum data rate, 7 kΩ input resistance, and an operating temperature range of 0°C to 70°C. The Texas Instruments datasheet also identifies adjustable input thresholds for fail-safe operation and compliance with the EIA/TIA-232-E interface requirements.
What is the best equivalent for SN75154D?
The best equivalent for SN75154D is the device that combines the same 16-pin SOIC footprint, four differential receiver channels, 5 V operation, compatible output polarity, and equivalent input-threshold behavior. Listed family candidates can support a drop-in review, but the Texas Instruments pin tables and electrical specifications remain the deciding authority. For a cross-brand substitution, request manufacturer cross-reference support and validate every pin before PCB release.

Technische Referenzdaten für SN75154D – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose SN75154D for a four-channel RS-232 receiving function that requires 5 V operation, a 16-pin SOIC footprint, a documented 1 Mbit/s rate, 7 kΩ input resistance, and adjustable fail-safe thresholds. Select SN75152D when evaluating a related four-channel receiver whose fail-safe implementation better matches the existing circuit. Consider SN75153D for a differential-receiver family variant with different threshold characteristics, and evaluate SN75156D, SN75157D, or SN75158D against the required data rate, supply range, and fail-safe state. Because all candidates use the same family footprint, final approval should depend on a pin-by-pin comparison, logic-polarity verification, threshold validation, and operating-temperature review rather than package appearance alone.

Vergleich mit Alternativen

Parameter Dieses Produkt SN75152D SN75153D SN75156D SN75157D SN75158D
Package SOIC-16 (D) SOIC-16 (D) SOIC-16 (D) SOIC-16 (D) SOIC-16 (D) SOIC-16 (D)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Receiver Channels 4 4 4 4 4 4
Product Type Quadruple differential RS-232 line receiver Quadruple line receiver Quadruple differential line receiver Quadruple differential line receiver Quadruple differential line receiver Quadruple differential line receiver

Wichtigste Unterscheidungsmerkmale

  • Four differential receivers in one 16-pin SOIC package (vs. SN75152D)
  • Explicit adjustable fail-safe input behavior (vs. SN75153D)
  • Specified 1 Mbit/s receiver performance (vs. SN75156D)
  • Seven-kilohm differential input resistance (vs. SN75157D)

Designhinweise

Place the power-supply bypass capacitor adjacent to the SN75154D supply pins and connect it directly to the ground reference. Route each differential input as a pair with closely matched geometry and adequate spacing from switching nodes. Because four receiver channels share one package, unequal routing between positive and negative conductors can convert common-mode interference into differential noise. Follow the manufacturer's pin and layout guidance when assigning the input network and grounding strategy.

Do not treat the SN75154D as a bidirectional transceiver: it contains four receivers and no RS-232 line drivers. Adding a separate driver is required when the equipment must transmit, and mixing driver and receiver supply or grounding errors can distort the received signal. Also verify output polarity and the inactive-state threshold before replacement because a common SOIC-16 footprint alone does not guarantee functional compatibility.

Use the adjustable input-threshold network to establish the required fail-safe logic state when the cable is open or the transmitter is inactive. Validate the selected threshold against the minimum and maximum receiver input voltages over the 0°C to 70°C operating range. Keep the threshold components close to their associated input pins and avoid long stubs that allow noise to couple differentially into the receiver.

Compliance-Informationen

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

RoHS compliance is indicated by component-listing information. No automotive qualification is indicated for this commercial-temperature RS-232 receiver. REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer's current compliance documentation.

Daten verifiziert am: 2026-11-09 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

sn75154d texas instruments SN75154D datasheet SN75154D datasheet pdf SN75154D pinout SN75154D equivalent SN75154D replacement SN75154D drop-in replacement SN75154D SOIC-16 pinout SN75154D price SN75154D vs SN75152D

Verwandte Bauteile & Begriffe

Texas Instruments SN75154 SN75154D SN75152D SN75153D SN75156D SN75157D SN75158D quad differential line receiver RS-232 receiver interface IC communications transceiver semiconductor EIA/TIA-232-E ITU V.28 SOIC-16 surface-mount package 5 V logic input threshold fail-safe receiver differential input 7 kΩ input resistance 1 Mbit/s data rate RoHS
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen