STM32F051C6T6 - 48MHz 32KB Cortex-M0 MCU | STMicroelectronics
Teilenummer: STM32F051C6T6 ✓ AktivSTM32F051C6T6 Übersicht
A microcontroller is a programmable semiconductor device that combines a processor core, program memory, data memory, and peripherals on one integrated circuit. The STM32F051 series belongs to the STM32F0 family, where the ARM Cortex-M0 core forms the foundation of a general-purpose embedded-control hierarchy spanning MCU, embedded processor, and semiconductor categories.
The STM32F051C6T6 combines a 48 MHz maximum clock with 32 KB of flash for firmware storage. Its operating voltage range of 2.0 V to 3.6 V supports low-voltage embedded systems, while the 48-LQFP package exposes a broad set of I/O resources for control boards and compact automation equipment. The suffix T6 identifies an STMicroelectronics ordering configuration associated with the specified temperature and package options.
At its core, the STM32F051C6T6 uses the 32-bit ARM Cortex-M0 RISC architecture, enabling efficient C-language firmware development with an ecosystem of general-purpose microcontrollers. The 32 KB flash configuration provides room for boot code, application logic, and configuration data in cost-sensitive designs. Exact RAM capacity, peripheral inventory, timer resources, and analog performance should be confirmed in the manufacturer datasheet before final design release.
Typical uses include industrial control modules, compact sensor nodes, appliance controllers, building automation interfaces, and low-cost embedded instruments. In each application, the MCU can consolidate multiple control tasks into one device while operating from a 2.0 V to 3.6 V supply. Its 48 MHz Cortex-M0 processing capability is appropriate for digital control, communication handling, and peripheral coordination where a higher-performance Cortex-M core is unnecessary.
PCB planning should follow the 48-LQFP land pattern and pin assignments defined by the manufacturer. Keep power and decoupling connections compact, provide clean grounding for digital and analog functions, and verify oscillator, reset, programming-interface, and I/O requirements against the device pin-description table. Adequate thermal copper and a stable 2.0 V to 3.6 V supply are essential for reliable operation.
This page combines the core architecture, memory, voltage, package, and application characteristics of the STM32F051C6T6 with practical sourcing guidance, replacement considerations, and PCB design notes. These engineering details help teams assess MCU suitability before downloading the official documentation and committing the device to a production design.
Drop-in-Alternativen für STM32F051C6T6 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit STM32F051C6T6 (gleiche Bauform und Footprint) – abweichend in Package, Flash Memory, SRAM, Product Type, Core Architecture.
STM32F030C6T6
✅ Drop-In✓ Auf Lager
$1.15 / Stück
Datenblatt ansehen →STM32F051C8T6
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →STM32F050C4T6ATR
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
STM32F031G6U6
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →STM32F051C6T6 Grenzwerte & elektrische Eigenschaften
| Product Type | ARM Cortex-M0 32-bit RISC microcontroller |
| Series | STM32F0 |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 32 KB |
| Flash Organization | 32K x 8 bits |
| Core Architecture | ARM Cortex-M0 |
| Instruction Set Width | 32-bit |
| Operating Voltage Range | 2.0 V to 3.6 V |
| Gehäuse | 48-LQFP, 7 x 7 mm |
| Montageart | Surface mount |
| Anzahl der Pins | 48 pins |
| Speichertyp | Flash |
| Application Class | Entry-level embedded control |
STM32F051C6T6 48-lqfp, 7 x 7 mm Pinbelegungsleitfaden
Pinbelegung für STM32F051C6T6 (48-lqfp, 7 x 7 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für STM32F051C6T6.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
STM32F051C6T6 ist geeignet für 6 Anwendungs: Industrial Sensor Controller, Smart Home Sensor Node, Appliance Control Module, Building Automation Interface, Low-Cost Data Acquisition Unit, Portable Measurement Device.
Industrial Sensor Controller
The STM32F051C6T6 fits compact sensor controllers that require deterministic digital processing within a 2.0 V to 3.6 V supply environment. Its ARM Cortex-M0 core operates at up to 48 MHz, allowing firmware to sample inputs, apply filtering, manage thresholds, and format data without a higher-performance processor. The 32 KB flash provides space for acquisition routines, communication handling, and configuration storage. Because the 48-LQFP package exposes a broad pin set, the controller can integrate sensors, status indicators, and a communications interface on one board. Confirm the exact GPIO, ADC, timer, and serial-interface requirements in the manufacturer datasheet before assigning every external signal.
Empfohlen
Smart Home Sensor Node
The STM32F051C6T6 is appropriate for compact smart-home sensor nodes that combine sensing, local logic, and low-speed communications. Its 32-bit ARM Cortex-M0 core can run at up to 48 MHz while operating from a 2.0 V to 3.6 V source, enabling efficient control from a regulated low-voltage rail. With 32 KB of flash, the node can hold sensor drivers, filtering logic, protocol handling, and diagnostic routines. The 48-LQFP package supports a useful mix of digital connections for a sensor bus, status LED, and serial communications. Designers should verify RAM, low-power modes, wake-up sources, and peripheral availability against the datasheet to ensure that the node meets its duty-cycle and responsiveness targets.
Empfohlen
Appliance Control Module
The STM32F051C6T6 can serve as the central controller in an appliance module that coordinates inputs, motors, relays, indicators, and safety monitoring. A 48 MHz ARM Cortex-M0 core provides enough performance for real-time state machines and peripheral servicing without requiring a complex processor. The device operates from 2.0 V to 3.6 V, which supports common low-voltage embedded architectures, and its 48-LQFP package provides a practical pin count for compact boards. The 32 KB flash capacity is suitable for applications with modest firmware requirements. Inductive loads and switching devices must be isolated appropriately, while the MCU supply needs local decoupling and careful grounding to prevent switching transients from disturbing control logic.
Empfohlen
Building Automation Interface
The STM32F051C6T6 suits building-automation interface modules that translate switches, sensors, or field-bus data into a common embedded control platform. Its 48 MHz ARM Cortex-M0 core can service timers, communication tasks, and logic concurrently, while the 2.0 V to 3.6 V operating range supports low-voltage equipment designs. Thirty-two kilobytes of flash can hold protocol stacks, diagnostics, and configuration logic for compact gateways or room controllers. The 48-LQFP package also offers enough physical pins for bus connections, indicators, and control outputs without forcing a multilayer board. Before selecting it, verify the required communication peripherals, timer counts, operating temperature range, and any industrial qualification requirements for the finished system.
Empfohlen
Low-Cost Data Acquisition Unit
The STM32F051C6T6 can support a compact data-acquisition unit that gathers digital measurements and performs local processing. Its 32-bit ARM Cortex-M0 core can operate at up to 48 MHz, providing enough throughput for sequencing, calibration, filtering, and packet preparation. The 32 KB flash stores acquisition firmware and lookup data, while the 2.0 V to 3.6 V operating range simplifies integration with low-voltage front ends. Its 48-LQFP package permits a conventional fine-pitch assembly process and provides a broad I/O complement for sensors and host interfaces. Exact analog-conversion characteristics, sampling capabilities, memory requirements, and timer resources must be checked in the manufacturer datasheet before committing to precision measurement requirements.
Empfohlen
Portable Measurement Device
The STM32F051C6T6 is suitable for portable measurement instruments where a 3.3 V system is acceptable and compact packaging is valuable. Its ARM Cortex-M0 core runs at up to 48 MHz for measurement sequencing, local display updates, and data logging, while 32 KB of flash accommodates application code and calibration parameters. The 2.0 V to 3.6 V operating range allows designers to use compatible low-voltage regulators and power-management arrangements. A 48-LQFP package is practical for a handheld or compact laboratory product that needs numerous external signals but does not require an ultra-miniature footprint. Battery life depends on the complete design, so evaluate sleep modes, peripheral activity, regulator efficiency, and analog load current rather than relying on CPU frequency alone.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für STM32F051C6T6 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | STM32F030C6T6 | STM32F051C8T6 | STM32F050C4T6ATR | STM32F031G6U6 |
|---|---|---|---|---|---|
| Package | 48-LQFP (7x7) | 48-LQFP (7x7) | 48-LQFP (7x7) | 48-LQFP (7x7) | 48-LQFP (7x7) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Flash Memory | 32 KB | 32 KB | 64 KB | 16 KB | 32 KB |
| Program Memory Type | Flash | Flash | Flash | Flash | Flash |
| Product Series | STM32F0 | STM32F0 | STM32F0 | STM32F0 | STM32F0 |
Wichtigste Unterscheidungsmerkmale
- Balanced 32 KB flash configuration within the STM32F051 family (vs. STM32F051C8T6)
- Twice the flash capacity of the 16 KB STM32F050C4T6ATR option (vs. STM32F050C4T6ATR)
- Matches the documented 48-LQFP flash and clock class of STM32F030C6T6 (vs. STM32F030C6T6)
Designhinweise
Use the manufacturer land pattern for the 48-LQFP 7 x 7 mm package and verify pin 1 orientation against the PCB marking and assembly drawing. A 0.5 mm pitch requires disciplined fanout routing, clean solder-mask definition, and adequate clearance between adjacent pads. Place decoupling capacitors close to the intended supply pins, provide a solid ground-plane connection, and route high-current or switching signals away from sensitive measurement inputs to reduce coupling into the MCU.
Design the supply path for the full 2.0 V to 3.6 V operating range and avoid relying on nominal 3.3 V alone. Place local bulk and high-frequency decoupling close to the device, keep return currents short, and confirm the regulator's startup, ripple, and load-transient behavior against the MCU's electrical limits. A common 3.3 V rail that also powers switching or radio circuitry should be filtered locally so transient noise does not create false resets or unreliable peripheral operation.
Follow the manufacturer pin-description table for oscillator, reset, programming, and ground assignments before laying out the board. Keep programming-test points accessible and preserve the recommended boot and reset implementation. If the design uses analog or communication signals, assign pins according to the specific STM32F051C6 variant rather than assuming that every 48-LQFP STM32F0 device has identical peripheral routing. This is especially important when considering an alternate MCU for an existing design.
Do not substitute a 48-pin STM32F0 device solely because the package outline matches. Confirm pin-to-pin assignments, flash and RAM capacity, available timers, communication interfaces, ADC functions, clock tree, and operating temperature limits. Firmware may also depend on device-specific interrupt vectors, register differences, and peripheral availability. A replacement should be validated with a hardware-in-the-loop test covering reset, boot, communications, analog measurements, and worst-case I/O activity.
Compliance-Informationen
Confirm current environmental, material, and automotive qualification statements from the manufacturer product documentation and product status information.