STMicroelectronics

STM32F051C6T6 - 48MHz 32KB Cortex-M0 MCU | STMicroelectronics

N.º da peça: STM32F051C6T6 ✓ Ativo
2.0 V to 3.6 V Vdss 48-LQFP, 7 x 7 mm Package 48 MHz Speed 32 KB Memory
MOQ: 1 |

STM32F051C6T6 Visão geral

STMicroelectronics STM32F051C6T6 is an ARM Cortex-M0 32-bit RISC microcontroller operating at up to 48 MHz, with 32 KB of flash memory in a 48-LQFP package. The device operates from 2.0 V to 3.6 V and targets cost-sensitive embedded systems that require deterministic control, efficient peripheral integration, and compact package options.

A microcontroller is a programmable semiconductor device that combines a processor core, program memory, data memory, and peripherals on one integrated circuit. The STM32F051 series belongs to the STM32F0 family, where the ARM Cortex-M0 core forms the foundation of a general-purpose embedded-control hierarchy spanning MCU, embedded processor, and semiconductor categories.

The STM32F051C6T6 combines a 48 MHz maximum clock with 32 KB of flash for firmware storage. Its operating voltage range of 2.0 V to 3.6 V supports low-voltage embedded systems, while the 48-LQFP package exposes a broad set of I/O resources for control boards and compact automation equipment. The suffix T6 identifies an STMicroelectronics ordering configuration associated with the specified temperature and package options.

At its core, the STM32F051C6T6 uses the 32-bit ARM Cortex-M0 RISC architecture, enabling efficient C-language firmware development with an ecosystem of general-purpose microcontrollers. The 32 KB flash configuration provides room for boot code, application logic, and configuration data in cost-sensitive designs. Exact RAM capacity, peripheral inventory, timer resources, and analog performance should be confirmed in the manufacturer datasheet before final design release.

Typical uses include industrial control modules, compact sensor nodes, appliance controllers, building automation interfaces, and low-cost embedded instruments. In each application, the MCU can consolidate multiple control tasks into one device while operating from a 2.0 V to 3.6 V supply. Its 48 MHz Cortex-M0 processing capability is appropriate for digital control, communication handling, and peripheral coordination where a higher-performance Cortex-M core is unnecessary.

PCB planning should follow the 48-LQFP land pattern and pin assignments defined by the manufacturer. Keep power and decoupling connections compact, provide clean grounding for digital and analog functions, and verify oscillator, reset, programming-interface, and I/O requirements against the device pin-description table. Adequate thermal copper and a stable 2.0 V to 3.6 V supply are essential for reliable operation.

This page combines the core architecture, memory, voltage, package, and application characteristics of the STM32F051C6T6 with practical sourcing guidance, replacement considerations, and PCB design notes. These engineering details help teams assess MCU suitability before downloading the official documentation and committing the device to a production design.

Alternativas drop-in para STM32F051C6T6 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com STM32F051C6T6 (mesmo formato e footprint) — diferindo em Package, Flash Memory, SRAM, Product Type, Core Architecture.

STMicroelectronics
Package: 48-pin LQFP (7x7 mm)
SRAM: 4 KB
Core Architecture: ARM Cortex-M0 32-bit RISC
Comparar com STM32F051C6T6 →
STMicroelectronics
Package: UFQFPN-28 (4 x 4 mm)
Flash Memory: 32 KB (32K x 8 bits)
SRAM: 4 KB
Comparar com STM32F051C6T6 →
STMicroelectronics
Package: 48-LQFP (7x7 mm)
Flash Memory: 32 KB (32K x 8)
SRAM: 6 KB
Comparar com STM32F051C6T6 →
STMicroelectronics
Package: 48-pin LQFP
Flash Memory: 64 KB (64K x 8)
SRAM: 8 KB (8K x 8)
Comparar com STM32F051C6T6 →
STMicroelectronics
Package: 32-LQFP (7 x 7 mm)
Flash Memory: 32 KB (32K x 8)
Product Type: 32-bit ARM Cortex-M0 microcontroller
Comparar com STM32F051C6T6 →
STMicroelectronics
Package: 32-LQFP (7x7 mm)
Flash Memory: 32 KB (32K x 8)
SRAM: 8 KB
Comparar com STM32F051C6T6 →

STM32F030C6T6

✅ Drop-In
STMicroelectronics
📦 48-LQFP (7x7)
ARM Cortex-M0 32-bit RISC · 48 MHz · 32 KB · 4 KB · 2.4 V to 3.6 V · -40 C to +85 C · 48-pin LQFP (7x7 mm) · 12-bit SAR, up to 10 channels

✓ Em estoque

$1.15 / unidade

Ver ficha técnica →

STM32F051C8T6

✅ Drop-In ⚠️ Especificações não verificadas
STMicroelectronics
📦 48-LQFP (7x7)
32-bit ARM Cortex-M0 microcontroller · 48 MHz · 32-bit RISC · 64 KB (64K x 8) · 8 KB (8K x 8) · 39 · 48-pin LQFP · Flash

Consulte o preço

Ver ficha técnica →

STM32F050C4T6ATR

✅ Drop-In
📦 48-LQFP (7x7)
Same 48-LQFP package, but flash is 16 KB versus 32 KB, a 16 KB or 50% reduction requiring firmware-space verification.

📋 Alternativa de referência (fora do catálogo)

STM32F031G6U6

✅ Drop-In ⚠️ Especificações não verificadas
STMicroelectronics
📦 48-LQFP (7x7)
32-bit ARM Cortex-M0 RISC microcontroller · 48 MHz · 32 KB (32K x 8 bits) · 4 KB · 2.0 V to 3.6 V · 12 bits · 1 · 9

Consulte o preço

Ver ficha técnica →

STM32F051C6T6 Classificações máximas e características elétricas

Product Type ARM Cortex-M0 32-bit RISC microcontroller
Series STM32F0
Maximum CPU Frequency 48 MHz
Flash Memory 32 KB
Flash Organization 32K x 8 bits
Core Architecture ARM Cortex-M0
Instruction Set Width 32-bit
Operating Voltage Range 2.0 V to 3.6 V
Encapsulamento 48-LQFP, 7 x 7 mm
Tipo de montagem Surface mount
Número de pinos 48 pins
Tipo de memória Flash
Application Class Entry-level embedded control

Guia de Configuração de Pinos do STM32F051C6T6 48-lqfp, 7 x 7 mm

Configuração de pinos para STM32F051C6T6 (pacote 48-lqfp, 7 x 7 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 48-lqfp, 7 x 7 mm para STM32F051C6T6

Nenhum dado detalhado de pinagem disponível para STM32F051C6T6.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

STM32F051C6T6 é adequado para 6 aplicaçãos: Industrial Sensor Controller, Smart Home Sensor Node, Appliance Control Module, Building Automation Interface, Low-Cost Data Acquisition Unit, Portable Measurement Device.

🏭

Industrial Sensor Controller

The STM32F051C6T6 fits compact sensor controllers that require deterministic digital processing within a 2.0 V to 3.6 V supply environment. Its ARM Cortex-M0 core operates at up to 48 MHz, allowing firmware to sample inputs, apply filtering, manage thresholds, and format data without a higher-performance processor. The 32 KB flash provides space for acquisition routines, communication handling, and configuration storage. Because the 48-LQFP package exposes a broad pin set, the controller can integrate sensors, status indicators, and a communications interface on one board. Confirm the exact GPIO, ADC, timer, and serial-interface requirements in the manufacturer datasheet before assigning every external signal.

🧩

Smart Home Sensor Node

The STM32F051C6T6 is appropriate for compact smart-home sensor nodes that combine sensing, local logic, and low-speed communications. Its 32-bit ARM Cortex-M0 core can run at up to 48 MHz while operating from a 2.0 V to 3.6 V source, enabling efficient control from a regulated low-voltage rail. With 32 KB of flash, the node can hold sensor drivers, filtering logic, protocol handling, and diagnostic routines. The 48-LQFP package supports a useful mix of digital connections for a sensor bus, status LED, and serial communications. Designers should verify RAM, low-power modes, wake-up sources, and peripheral availability against the datasheet to ensure that the node meets its duty-cycle and responsiveness targets.

🔧

Appliance Control Module

The STM32F051C6T6 can serve as the central controller in an appliance module that coordinates inputs, motors, relays, indicators, and safety monitoring. A 48 MHz ARM Cortex-M0 core provides enough performance for real-time state machines and peripheral servicing without requiring a complex processor. The device operates from 2.0 V to 3.6 V, which supports common low-voltage embedded architectures, and its 48-LQFP package provides a practical pin count for compact boards. The 32 KB flash capacity is suitable for applications with modest firmware requirements. Inductive loads and switching devices must be isolated appropriately, while the MCU supply needs local decoupling and careful grounding to prevent switching transients from disturbing control logic.

🏠

Building Automation Interface

The STM32F051C6T6 suits building-automation interface modules that translate switches, sensors, or field-bus data into a common embedded control platform. Its 48 MHz ARM Cortex-M0 core can service timers, communication tasks, and logic concurrently, while the 2.0 V to 3.6 V operating range supports low-voltage equipment designs. Thirty-two kilobytes of flash can hold protocol stacks, diagnostics, and configuration logic for compact gateways or room controllers. The 48-LQFP package also offers enough physical pins for bus connections, indicators, and control outputs without forcing a multilayer board. Before selecting it, verify the required communication peripherals, timer counts, operating temperature range, and any industrial qualification requirements for the finished system.

📊

Low-Cost Data Acquisition Unit

The STM32F051C6T6 can support a compact data-acquisition unit that gathers digital measurements and performs local processing. Its 32-bit ARM Cortex-M0 core can operate at up to 48 MHz, providing enough throughput for sequencing, calibration, filtering, and packet preparation. The 32 KB flash stores acquisition firmware and lookup data, while the 2.0 V to 3.6 V operating range simplifies integration with low-voltage front ends. Its 48-LQFP package permits a conventional fine-pitch assembly process and provides a broad I/O complement for sensors and host interfaces. Exact analog-conversion characteristics, sampling capabilities, memory requirements, and timer resources must be checked in the manufacturer datasheet before committing to precision measurement requirements.

🔋

Portable Measurement Device

The STM32F051C6T6 is suitable for portable measurement instruments where a 3.3 V system is acceptable and compact packaging is valuable. Its ARM Cortex-M0 core runs at up to 48 MHz for measurement sequencing, local display updates, and data logging, while 32 KB of flash accommodates application code and calibration parameters. The 2.0 V to 3.6 V operating range allows designers to use compatible low-voltage regulators and power-management arrangements. A 48-LQFP package is practical for a handheld or compact laboratory product that needs numerous external signals but does not require an ultra-miniature footprint. Battery life depends on the complete design, so evaluate sleep modes, peripheral activity, regulator efficiency, and analog load current rather than relying on CPU frequency alone.

What is the operating voltage of STM32F051C6T6?
The STM32F051C6T6 operates from 2.0 V to 3.6 V. According to the Mouser product listing and the STMicroelectronics STM32F051C6 product documentation, this voltage range suits low-voltage embedded-control systems using a regulated 3.3 V rail or a compatible source within the specified limits. Confirm the operating mode, clock configuration, and peripheral current requirements in the manufacturer datasheet before applying the supply limits to the complete circuit.
What are the key specifications of STM32F051C6T6 that engineers should know?
The STM32F051C6T6 is a 32-bit ARM Cortex-M0 microcontroller with a maximum clock frequency of 48 MHz, 32 KB of flash memory, a 2.0 V to 3.6 V operating range, and a 48-LQFP package measuring 7 x 7 mm. According to the STMicroelectronics product page and distributor technical listings, these characteristics place the device in the entry-level embedded-control market. RAM, GPIO count, timers, communication peripherals, and detailed electrical limits must be checked against the manufacturer datasheet.
Where can I download the STM32F051C6T6 datasheet PDF?
The official STM32F051C6 product page is the primary location for the STM32F051C6T6 technical documentation. It identifies the MCU family, ARM Cortex-M0 architecture, 48 MHz maximum operating frequency, and family-level capabilities. Download the current datasheet from that page and verify the ordering information, pin descriptions, electrical characteristics, package drawings, and revision history before releasing a PCB or production BOM.
Where can I find the STM32F051C6T6 pinout and package drawing?
The STM32F051C6T6 pinout is defined in the manufacturer datasheet and package drawings for the 48-LQFP 7 x 7 mm package. Use the pin-description table to assign power, ground, reset, oscillator, programming, and I/O functions. The 48-LQFP footprint requires a land pattern with adequate copper for assembly; do not infer pin functions from a similar STM32F0 member without checking the exact device.
Is STM32F051C6T6 suitable for low-cost embedded control applications?
Yes. The STM32F051C6T6 combines a 48 MHz ARM Cortex-M0 core with 32 KB of flash and a 2.0 V to 3.6 V supply range, making it suitable for cost-sensitive embedded controllers. It can serve compact sensor interfaces, appliance controls, automation modules, and basic industrial equipment. The final suitability depends on the required RAM count, peripherals, real-time response, and qualification environment for the finished product.
Where to buy STM32F051C6T6 online?
Use the Request a Quote form on this page to request STM32F051C6T6 availability, current lead time, and ordering support. The exact device is a 48-LQFP STM32F051C6T6 microcontroller with 32 KB of flash and a 48 MHz Cortex-M0 core. Include your target quantity, delivery location, date code preference, and packaging requirements so the sourcing response can be matched to the production build.
What is the price of STM32F051C6T6?
Current STM32F051C6T6 pricing and quantity availability are handled through the Request a Quote form on this page. Pricing can vary with order quantity, date code, inventory position, and packaging configuration, so a static figure may not reflect the supply available for a particular build. Submit the required quantity and delivery details to receive a current quotation for the exact 48-LQFP ordering code.
What is the lead time for STM32F051C6T6?
The current lead time for STM32F051C6T6 should be requested through the Request a Quote form on this page. Lead time depends on factory inventory, production scheduling, quantity, and the required shipment destination. The STMicroelectronics product page remains the authoritative source for device documentation and lifecycle information, while the quote request provides the information needed for a specific procurement schedule.
Is STM32F051C6T6 in stock?
Stock status for STM32F051C6T6 is quote-specific and should be confirmed through the Request a Quote form on this page. Enter the required order quantity, delivery country, target date, and any date-code constraints. This is important because the exact 48-LQFP configuration, production lot, and order quantity determine whether parts can be allocated from available inventory or scheduled for supply.
STM32F051C6T6 vs STM32F030C6T6 - which is better for a cost-sensitive design?
STM32F051C6T6 and STM32F030C6T6 both appear in 48-LQFP configurations with 32 KB of flash and an ARM Cortex-M0-class 48 MHz operating point, but their peripheral sets and device details must be compared before substitution. The cross-reference results identify STM32F030C6T6 as a comparable 32 KB, 48-pin LQFP device. Select the newer family only after reviewing GPIO, timer, ADC, communication, and firmware-support differences in the manufacturer datasheets.
What is the difference between STM32F051C6T6 and STM32F051C8T6?
The principal documented difference is flash capacity: the STM32F051C6T6 has 32 KB of flash, while the STM32F051C8T6 belongs to the 64 KB configuration of the STM32F051 family. Both use the ARM Cortex-M0 architecture and the 48-LQFP package, making the C8 variant a candidate for designs that need additional firmware space. Verify the exact pin assignment, RAM configuration, and supported peripheral set before treating it as a drop-in replacement.
When should I choose STM32F051C6T6 over STM32F030C6T6?
Choose STM32F051C6T6 when the design benefits from the STM32F051 family's feature set while remaining within a 32 KB flash and 48-LQFP configuration. Choose STM32F030C6T6 only after confirming that its pin mapping and required peripherals satisfy the design. Both offer a 48 MHz ARM Cortex-M0 operating point and 32 KB of flash in the cited comparison, so peripheral fit and device maturity should determine the choice.
Is STM32F051C6T6 suitable for a 3.3 V sensor controller?
Yes, the STM32F051C6T6 is suitable for a 3.3 V sensor controller when the full system remains within its 2.0 V to 3.6 V operating range. Its 32-bit ARM Cortex-M0 core can run at up to 48 MHz, and 32 KB of flash provides space for acquisition control, filtering, communications, and diagnostics. Confirm analog-input limits, sensor interface requirements, and the amount of RAM needed before finalizing the design.
What can replace STM32F051C6T6?
The closest documented drop-in candidates are STM32F030C6T6, STM32F050C4T6ATR, and STM32F051C8T6 because they use the same 48-LQFP package family and operate in the STM32F0 class. However, replacement requires exact verification of pin assignment, flash capacity, RAM, peripherals, power behavior, and firmware compatibility. Use the Request a Quote form when you need sourcing support for the exact replacement part.
Is STM32F051C6T6 the same as STM32F103C8T6TR?
No. The STM32F051C6T6 is a 48 MHz ARM Cortex-M0 device with 32 KB of flash in a 48-LQFP package, while the STM32F103C8T6TR uses a different Cortex-M3 generation, a smaller 64-pin package, and a different flash configuration. The devices are not drop-in replacements despite both belonging to the STM32 family. A board redesign, firmware port, and careful peripheral mapping are required.
What is the best cross-brand equivalent for STM32F051C6T6?
No cross-brand equivalent can be confirmed as a drop-in replacement from the available cross-reference information. Cross-manufacturer microcontroller candidates must match the 48-LQFP pin map, 2.0 V to 3.6 V operating range, memory capacity, peripheral functions, clocking, and programming behavior. Choose a cross-brand device only after a complete electrical and software comparison; otherwise, an STM32F0-family part offers the most defensible replacement path.

Dados de referência de engenharia para STM32F051C6T6 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the STM32F051C6T6 when a design needs a 48 MHz ARM Cortex-M0 core, 32 KB of flash, a 2.0 V to 3.6 V supply range, and a 48-LQFP footprint. Consider STM32F030C6T6 when its documented 32 KB, 48-LQFP configuration meets the required peripheral set, but verify pin assignments and firmware differences before replacing an existing board. Choose STM32F051C8T6 when the same family and package are preferred but 64 KB of flash is needed; it provides twice the program memory. STM32F050C4T6ATR is appropriate only when 16 KB of flash is sufficient, because it reduces firmware space by 16 KB relative to the STM32F051C6T6. STM32F031G6U6 is another same-family 32 KB option, but its package markings and peripheral mapping require explicit verification. For every candidate, check RAM, GPIO, timers, analog functions, communications, temperature range, and programming behavior against the exact manufacturer datasheet.

Comparação com alternativas

Parâmetro Este produto STM32F030C6T6 STM32F051C8T6 STM32F050C4T6ATR STM32F031G6U6
Package 48-LQFP (7x7) 48-LQFP (7x7) 48-LQFP (7x7) 48-LQFP (7x7) 48-LQFP (7x7)
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Flash Memory 32 KB 32 KB 64 KB 16 KB 32 KB
Program Memory Type Flash Flash Flash Flash Flash
Product Series STM32F0 STM32F0 STM32F0 STM32F0 STM32F0

Principais diferenciais

  • Balanced 32 KB flash configuration within the STM32F051 family (vs STM32F051C8T6)
  • Twice the flash capacity of the 16 KB STM32F050C4T6ATR option (vs STM32F050C4T6ATR)
  • Matches the documented 48-LQFP flash and clock class of STM32F030C6T6 (vs STM32F030C6T6)

Notas de projeto

Use the manufacturer land pattern for the 48-LQFP 7 x 7 mm package and verify pin 1 orientation against the PCB marking and assembly drawing. A 0.5 mm pitch requires disciplined fanout routing, clean solder-mask definition, and adequate clearance between adjacent pads. Place decoupling capacitors close to the intended supply pins, provide a solid ground-plane connection, and route high-current or switching signals away from sensitive measurement inputs to reduce coupling into the MCU.

Design the supply path for the full 2.0 V to 3.6 V operating range and avoid relying on nominal 3.3 V alone. Place local bulk and high-frequency decoupling close to the device, keep return currents short, and confirm the regulator's startup, ripple, and load-transient behavior against the MCU's electrical limits. A common 3.3 V rail that also powers switching or radio circuitry should be filtered locally so transient noise does not create false resets or unreliable peripheral operation.

Follow the manufacturer pin-description table for oscillator, reset, programming, and ground assignments before laying out the board. Keep programming-test points accessible and preserve the recommended boot and reset implementation. If the design uses analog or communication signals, assign pins according to the specific STM32F051C6 variant rather than assuming that every 48-LQFP STM32F0 device has identical peripheral routing. This is especially important when considering an alternate MCU for an existing design.

Do not substitute a 48-pin STM32F0 device solely because the package outline matches. Confirm pin-to-pin assignments, flash and RAM capacity, available timers, communication interfaces, ADC functions, clock tree, and operating temperature limits. Firmware may also depend on device-specific interrupt vectors, register differences, and peripheral availability. A replacement should be validated with a hardware-in-the-loop test covering reset, boot, communications, analog measurements, and worst-case I/O activity.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Confirm current environmental, material, and automotive qualification statements from the manufacturer product documentation and product status information.

Dados verificados em: 2026-11-19 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

STM32F051C6T6 STM32F051C6T6 datasheet STM32F051C6T6 datasheet pdf STM32F051C6T6 pinout STM32F051C6T6 equivalent STM32F051C6T6 replacement STM32F051C6T6 cross reference STM32F051C6T6 vs STM32F030C6T6 STM32F051C6T6 LQFP-48 footprint STM32F051C6T6 48MHz 32KB STM32F051C6T6 price STM32F051C6T6 stock

Componentes & termos relacionados

STMicroelectronics STM32F051C6T6 STM32F051C6 STM32F0 STM32F030C6T6 STM32F051C8T6 STM32F050C4T6ATR STM32F031G6U6 ARM Cortex-M0 32-bit RISC core microcontroller embedded processor semiconductor 48 MHz 32 KB flash memory 2.0 V to 3.6 V 48-LQFP LQFP package surface mount industrial control sensor controller building automation data acquisition
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ