STM32F334C6T6 - 72MHz Cortex-M4 32KB MCU | STMicroelectronics
Teilenummer: STM32F334C6T6 ✓ AktivSTM32F334C6T6 Übersicht
A microcontroller is a programmable semiconductor that integrates a CPU, memory, timers, communication interfaces, and analog or digital peripherals onto one device. The STM32F334C6T6 belongs to the STM32F3 mixed-signal MCU family, combining an Arm Cortex-M4 processor with resources suited to precision timing, signal measurement, communications, and industrial control. Its 32-bit architecture supports efficient control processing while the mixed-signal features expand design flexibility.
The principal specifications include an operating frequency of up to 72 MHz, 32 KB of Flash for embedded firmware, and 16 KB of SRAM for working memory. The device also provides high-resolution timer resources and mixed-signal functionality. These characteristics make it suitable for motor-control, power-conversion, industrial automation, sensing, and embedded communication designs where both real-time processing and analog-related peripherals are required.
The STM32F334x4/6/8 family uses the Arm Cortex-M4 32-bit RISC core, with floating-point hardware embedded in the core as described by the manufacturer. Its 48-LQFP package exposes 48 peripheral and power pins, supporting integration into conventional surface-mount PCB layouts. Compared with a smaller 32-pin or 20-pin package, the 48-pin arrangement provides additional interface and analog connectivity without requiring the larger lead pitches associated with some high-pin-count packages.
Typical applications include digital power supplies, motor controllers, industrial sensor nodes, PLC and automation peripherals, communications equipment, and compact embedded instruments. A design can use the Cortex-M4 core for control algorithms, the timers for precise switching or sampling, and the SRAM for working buffers. The 32 KB Flash capacity suits firmware with focused application logic rather than large graphical or storage-intensive workloads.
Designers should verify the complete pin assignment, operating limits, peripheral configuration, and power requirements against the manufacturer datasheet before layout or firmware release. In particular, preserve the recommended decoupling arrangement near the supply pins and validate analog-source impedance, timer inputs, clock configuration, and unused-pin treatment in the final PCB design.
This page combines verified manufacturer and distributor information, package and application context, pricing, drop-in candidate analysis, and practical engineering guidance. It is intended to help engineers assess STM32F334C6T6 suitability for embedded control designs and compare potential replacements without treating package similarity alone as proof of functional interchangeability.
Drop-in-Alternativen für STM32F334C6T6 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit STM32F334C6T6 (gleiche Bauform und Footprint) – abweichend in Supply Voltage, Flash Memory, Package, SRAM, ADC Resolution.
STM32F303C6T6
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
STM32F358C6T6
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
STM32F301C6T6
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
STM32F302C6T6
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →STM32F334C8T6
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →STM32F334C6T6 Grenzwerte & elektrische Eigenschaften
| Manufacturer | STMicroelectronics |
| Product Type | 32-bit ARM Cortex-M4 mixed-signal microcontroller |
| CPU Core | Arm Cortex-M4 with floating-point capability |
| Instruction Set | 32-bit RISC |
| Maximum CPU Frequency | 72 MHz |
| Flash Memory | 32 KB (32K x 8) |
| SRAM | 16 KB |
| Versorgungsspannung | 3.3 V |
| Gehäuse | 48-pin LQFP (7 x 7 mm) |
| Montageart | Surface Mount |
| Timer Resources | High-resolution timer |
| Core Architecture | Arm Cortex-M4 32-bit RISC |
| Programmable Memory Type | Flash |
STM32F334C6T6 48-pin lqfp (7 x 7 mm) Pinbelegungsleitfaden
Pinbelegung für STM32F334C6T6 (48-pin lqfp (7 x 7 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für STM32F334C6T6.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
STM32F334C6T6 ist geeignet für 6 Anwendungs: Digital Power-Supply Control, Industrial Motor Controller, Industrial Sensor Gateway, PLC and Automation I/O Module, Precision Timing and Signal Measurement, Embedded Communications Equipment.
Digital Power-Supply Control
The STM32F334C6T6 fits digital power converters because its 72 MHz Arm Cortex-M4 core can execute control calculations and high-resolution timers can support precise switching events. The device combines 32 KB of Flash for firmware with 16 KB of SRAM for transient control data, while its mixed-signal architecture supports analog-influenced feedback designs. Place the MCU near the power stage and isolate sensitive analog routing from switching nodes. Validate timer resolution, ADC latency, compensation calculations, and fault-response timing in the final design.
Empfohlen
Industrial Motor Controller
STM32F334C6T6 is appropriate for compact motor-control modules that require deterministic computation and precise timer resources. Its Cortex-M4 core operates at up to 72 MHz, enabling current-loop and commutation routines, while 16 KB of SRAM provides working space for control state. The 48-LQFP package exposes substantially more connectivity than a small 20-pin device. Confirm motor-interface pin assignments, timer channels, PWM synchronization, encoder inputs, thermal monitoring, and protection shutdown behavior before production.
Empfohlen
Industrial Sensor Gateway
The STM32F334C6T6 can act as the local controller for an industrial sensor node that samples mixed signals, applies filtering, and forwards measurements over a serial interface. Its 72 MHz processing rate supports responsive acquisition and control, and the 32 KB Flash capacity suits focused gateway firmware rather than large applications. The 48-LQFP package supports communication, control, and analog connections on a single board. Validate sensor excitation timing, input filtering, isolation boundaries, bus termination, and firmware update requirements.
Empfohlen
PLC and Automation I/O Module
STM32F334C6T6 is suitable for PLC-adjacent automation I/O where local timing, status handling, and communication must be consolidated. The 48-pin LQFP package offers enough connections for inputs, outputs, and serial interfaces, while the Cortex-M4 core provides more performance than a basic 8-bit controller. Its 16 KB SRAM is appropriate for bounded I/O state and diagnostics. Verify galvanic isolation, input filtering, output-driver ratings, watchdog behavior, and communication protocol timing at the system level.
Empfohlen
Precision Timing and Signal Measurement
The high-performance STM32F334C6T6 supports precision timing and mixed-signal measurement because it combines a 72 MHz Cortex-M4 core with high-resolution timer resources. The timer block can support accurate event generation, frequency measurement, sampling windows, and synchronized outputs, while the mixed-signal MCU family is intended for applications combining digital processing with analog signals. Validate oscillator tolerance, timer accuracy, trigger latency, analog-input conditioning, and calibration procedures when establishing measurement uncertainty.
Empfohlen
Embedded Communications Equipment
STM32F334C6T6 can serve as the main controller in compact communications equipment requiring a 32-bit processor, deterministic real-time behavior, and mixed-signal peripherals. The 72 MHz Cortex-M4 core handles protocol processing and supervisory logic, and 32 KB of Flash accommodates focused firmware. Its 48-LQFP package offers a practical balance between connection count and board area. Before schematic release, confirm the exact UART, SPI, I2C, USB, or other communication resources available on the STM32F334C6 and their alternate-function pins.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für STM32F334C6T6 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | STM32F303C6T6 | STM32F358C6T6 | STM32F301C6T6 | STM32F302C6T6 | STM32F334C8T6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) |
| CPU Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum CPU Frequency | 72 MHz | 72 MHz | 72 MHz | 72 MHz | 72 MHz | 72 MHz |
| Flash Memory | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB | 64 KB |
| SRAM | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB |
| Architecture | 32-bit RISC with floating-point capability | 32-bit RISC with floating-point capability | 32-bit RISC with floating-point capability | 32-bit RISC with floating-point capability | 32-bit RISC with floating-point capability | 32-bit RISC with floating-point capability |
| Product Family | STM32F3 mixed-signal MCU | STM32F3 mixed-signal MCU | STM32F3 mixed-signal MCU | STM32F3 mixed-signal MCU | STM32F3 mixed-signal MCU | STM32F334 mixed-signal MCU |
Wichtigste Unterscheidungsmerkmale
- Mixed-signal STM32F334 positioning (vs. STM32F301C6T6)
- Memory-capacity choice within the same device family (vs. STM32F334C8T6)
- Same core, memory, and package alignment for qualified alternatives (vs. STM32F303C6T6)
- Directly available distributor sourcing (vs. STM32F334C8T6)
Designhinweise
Place all required decoupling capacitors adjacent to the STM32F334C6T6 supply pins and return them to a quiet ground plane. The supplied source confirms a 3.3 V operating condition but does not provide the full pinout or capacitor values, so use the manufacturer reference schematic and layout for the exact values. Keep analog and digital return paths controlled, and avoid routing high-current switching-node copper beneath sensitive input or reference nets.
Assign every LQFP pin to a specific power, ground, clock, reset, debug, or peripheral function before routing. The verified data confirms a 48-LQFP package but does not include a trustworthy complete pin-name table. Review the current STMicroelectronics datasheet and pinout before schematic release, especially for alternate-function remapping and package-specific exposed connections. A PCB that follows a generic STM32F3 drawing rather than the exact STM32F334C6 datasheet can create boot, SWD, or peripheral failures.
Do not treat an STM32F3 device with the same package as an automatic drop-in replacement. Even candidates sharing the 48-LQFP footprint, 72 MHz Cortex-M4 core, 32 KB Flash, and 16 KB SRAM can differ in timer channels, analog mapping, clock tree, communication peripherals, and firmware behavior. Build a comparison using the actual used pins and register-level dependencies, then perform boot, timing, interrupt, analog, and fault-response tests on both devices.
For precision timing or mixed-signal designs, keep clock and high-speed communication traces short, provide a continuous return path, and avoid splitting ground planes beneath the LQFP. Respect the device’s clock and peripheral timing requirements from the manufacturer reference manual. Where analog signals enter the MCU, use controlled source impedance and filtering, and validate sampling behavior with the actual sensor or power-conversion front end rather than relying only on nominal ADC or timer specifications.
Compliance-Informationen
The supplied verified product, distributor, and search-result data does not explicitly state the compliance status of STM32F334C6T6. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification statements in the current manufacturer product documentation.