STM32F334C6T6 - 72MHz Cortex-M4 32KB MCU | STMicroelectronics
N.º da peça: STM32F334C6T6 ✓ AtivoSTM32F334C6T6 Visão geral
A microcontroller is a programmable semiconductor that integrates a CPU, memory, timers, communication interfaces, and analog or digital peripherals onto one device. The STM32F334C6T6 belongs to the STM32F3 mixed-signal MCU family, combining an Arm Cortex-M4 processor with resources suited to precision timing, signal measurement, communications, and industrial control. Its 32-bit architecture supports efficient control processing while the mixed-signal features expand design flexibility.
The principal specifications include an operating frequency of up to 72 MHz, 32 KB of Flash for embedded firmware, and 16 KB of SRAM for working memory. The device also provides high-resolution timer resources and mixed-signal functionality. These characteristics make it suitable for motor-control, power-conversion, industrial automation, sensing, and embedded communication designs where both real-time processing and analog-related peripherals are required.
The STM32F334x4/6/8 family uses the Arm Cortex-M4 32-bit RISC core, with floating-point hardware embedded in the core as described by the manufacturer. Its 48-LQFP package exposes 48 peripheral and power pins, supporting integration into conventional surface-mount PCB layouts. Compared with a smaller 32-pin or 20-pin package, the 48-pin arrangement provides additional interface and analog connectivity without requiring the larger lead pitches associated with some high-pin-count packages.
Typical applications include digital power supplies, motor controllers, industrial sensor nodes, PLC and automation peripherals, communications equipment, and compact embedded instruments. A design can use the Cortex-M4 core for control algorithms, the timers for precise switching or sampling, and the SRAM for working buffers. The 32 KB Flash capacity suits firmware with focused application logic rather than large graphical or storage-intensive workloads.
Designers should verify the complete pin assignment, operating limits, peripheral configuration, and power requirements against the manufacturer datasheet before layout or firmware release. In particular, preserve the recommended decoupling arrangement near the supply pins and validate analog-source impedance, timer inputs, clock configuration, and unused-pin treatment in the final PCB design.
This page combines verified manufacturer and distributor information, package and application context, pricing, drop-in candidate analysis, and practical engineering guidance. It is intended to help engineers assess STM32F334C6T6 suitability for embedded control designs and compare potential replacements without treating package similarity alone as proof of functional interchangeability.
Alternativas drop-in para STM32F334C6T6 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com STM32F334C6T6 (mesmo formato e footprint) — diferindo em Supply Voltage, Flash Memory, Package, SRAM, ADC Resolution.
STM32F303C6T6
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
STM32F358C6T6
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
STM32F301C6T6
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
STM32F302C6T6
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →STM32F334C8T6
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →STM32F334C6T6 Classificações máximas e características elétricas
| Manufacturer | STMicroelectronics |
| Product Type | 32-bit ARM Cortex-M4 mixed-signal microcontroller |
| CPU Core | Arm Cortex-M4 with floating-point capability |
| Instruction Set | 32-bit RISC |
| Maximum CPU Frequency | 72 MHz |
| Flash Memory | 32 KB (32K x 8) |
| SRAM | 16 KB |
| Tensão de alimentação | 3.3 V |
| Encapsulamento | 48-pin LQFP (7 x 7 mm) |
| Tipo de montagem | Surface Mount |
| Timer Resources | High-resolution timer |
| Core Architecture | Arm Cortex-M4 32-bit RISC |
| Programmable Memory Type | Flash |
Guia de Configuração de Pinos do STM32F334C6T6 48-pin lqfp (7 x 7 mm)
Configuração de pinos para STM32F334C6T6 (pacote 48-pin lqfp (7 x 7 mm)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para STM32F334C6T6.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
STM32F334C6T6 é adequado para 6 aplicaçãos: Digital Power-Supply Control, Industrial Motor Controller, Industrial Sensor Gateway, PLC and Automation I/O Module, Precision Timing and Signal Measurement, Embedded Communications Equipment.
Digital Power-Supply Control
The STM32F334C6T6 fits digital power converters because its 72 MHz Arm Cortex-M4 core can execute control calculations and high-resolution timers can support precise switching events. The device combines 32 KB of Flash for firmware with 16 KB of SRAM for transient control data, while its mixed-signal architecture supports analog-influenced feedback designs. Place the MCU near the power stage and isolate sensitive analog routing from switching nodes. Validate timer resolution, ADC latency, compensation calculations, and fault-response timing in the final design.
Recomendado
Industrial Motor Controller
STM32F334C6T6 is appropriate for compact motor-control modules that require deterministic computation and precise timer resources. Its Cortex-M4 core operates at up to 72 MHz, enabling current-loop and commutation routines, while 16 KB of SRAM provides working space for control state. The 48-LQFP package exposes substantially more connectivity than a small 20-pin device. Confirm motor-interface pin assignments, timer channels, PWM synchronization, encoder inputs, thermal monitoring, and protection shutdown behavior before production.
Recomendado
Industrial Sensor Gateway
The STM32F334C6T6 can act as the local controller for an industrial sensor node that samples mixed signals, applies filtering, and forwards measurements over a serial interface. Its 72 MHz processing rate supports responsive acquisition and control, and the 32 KB Flash capacity suits focused gateway firmware rather than large applications. The 48-LQFP package supports communication, control, and analog connections on a single board. Validate sensor excitation timing, input filtering, isolation boundaries, bus termination, and firmware update requirements.
Recomendado
PLC and Automation I/O Module
STM32F334C6T6 is suitable for PLC-adjacent automation I/O where local timing, status handling, and communication must be consolidated. The 48-pin LQFP package offers enough connections for inputs, outputs, and serial interfaces, while the Cortex-M4 core provides more performance than a basic 8-bit controller. Its 16 KB SRAM is appropriate for bounded I/O state and diagnostics. Verify galvanic isolation, input filtering, output-driver ratings, watchdog behavior, and communication protocol timing at the system level.
Recomendado
Precision Timing and Signal Measurement
The high-performance STM32F334C6T6 supports precision timing and mixed-signal measurement because it combines a 72 MHz Cortex-M4 core with high-resolution timer resources. The timer block can support accurate event generation, frequency measurement, sampling windows, and synchronized outputs, while the mixed-signal MCU family is intended for applications combining digital processing with analog signals. Validate oscillator tolerance, timer accuracy, trigger latency, analog-input conditioning, and calibration procedures when establishing measurement uncertainty.
Recomendado
Embedded Communications Equipment
STM32F334C6T6 can serve as the main controller in compact communications equipment requiring a 32-bit processor, deterministic real-time behavior, and mixed-signal peripherals. The 72 MHz Cortex-M4 core handles protocol processing and supervisory logic, and 32 KB of Flash accommodates focused firmware. Its 48-LQFP package offers a practical balance between connection count and board area. Before schematic release, confirm the exact UART, SPI, I2C, USB, or other communication resources available on the STM32F334C6 and their alternate-function pins.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para STM32F334C6T6 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | STM32F303C6T6 | STM32F358C6T6 | STM32F301C6T6 | STM32F302C6T6 | STM32F334C8T6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) |
| CPU Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum CPU Frequency | 72 MHz | 72 MHz | 72 MHz | 72 MHz | 72 MHz | 72 MHz |
| Flash Memory | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB | 64 KB |
| SRAM | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB |
| Architecture | 32-bit RISC with floating-point capability | 32-bit RISC with floating-point capability | 32-bit RISC with floating-point capability | 32-bit RISC with floating-point capability | 32-bit RISC with floating-point capability | 32-bit RISC with floating-point capability |
| Product Family | STM32F3 mixed-signal MCU | STM32F3 mixed-signal MCU | STM32F3 mixed-signal MCU | STM32F3 mixed-signal MCU | STM32F3 mixed-signal MCU | STM32F334 mixed-signal MCU |
Principais diferenciais
- Mixed-signal STM32F334 positioning (vs STM32F301C6T6)
- Memory-capacity choice within the same device family (vs STM32F334C8T6)
- Same core, memory, and package alignment for qualified alternatives (vs STM32F303C6T6)
- Directly available distributor sourcing (vs STM32F334C8T6)
Notas de projeto
Place all required decoupling capacitors adjacent to the STM32F334C6T6 supply pins and return them to a quiet ground plane. The supplied source confirms a 3.3 V operating condition but does not provide the full pinout or capacitor values, so use the manufacturer reference schematic and layout for the exact values. Keep analog and digital return paths controlled, and avoid routing high-current switching-node copper beneath sensitive input or reference nets.
Assign every LQFP pin to a specific power, ground, clock, reset, debug, or peripheral function before routing. The verified data confirms a 48-LQFP package but does not include a trustworthy complete pin-name table. Review the current STMicroelectronics datasheet and pinout before schematic release, especially for alternate-function remapping and package-specific exposed connections. A PCB that follows a generic STM32F3 drawing rather than the exact STM32F334C6 datasheet can create boot, SWD, or peripheral failures.
Do not treat an STM32F3 device with the same package as an automatic drop-in replacement. Even candidates sharing the 48-LQFP footprint, 72 MHz Cortex-M4 core, 32 KB Flash, and 16 KB SRAM can differ in timer channels, analog mapping, clock tree, communication peripherals, and firmware behavior. Build a comparison using the actual used pins and register-level dependencies, then perform boot, timing, interrupt, analog, and fault-response tests on both devices.
For precision timing or mixed-signal designs, keep clock and high-speed communication traces short, provide a continuous return path, and avoid splitting ground planes beneath the LQFP. Respect the device’s clock and peripheral timing requirements from the manufacturer reference manual. Where analog signals enter the MCU, use controlled source impedance and filtering, and validate sampling behavior with the actual sensor or power-conversion front end rather than relying only on nominal ADC or timer specifications.
Informações de conformidade
The supplied verified product, distributor, and search-result data does not explicitly state the compliance status of STM32F334C6T6. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification statements in the current manufacturer product documentation.