STM32F767VGT6 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics
Teilenummer: STM32F767VGT6 ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $11.284 | $11,28 |
| 10 | $11.284 | $112,84 |
| 100 | $11.284 | $1.128,40 |
| 500 | $11.284 | $5.642,00 |
| 1.000 | $11.284 | $11.284,00 |
STM32F767VGT6 Übersicht
A microcontroller is a programmable system-on-chip that integrates a processor core, Flash program memory, RAM, peripherals, and communication interfaces. The Cortex-M7 MCU category sits within embedded processors and extends from real-time control to high-performance graphics, networking, and audio. STM32F7 devices are suited to systems that require substantially more computation than basic control-only MCUs.
Verified features for the STM32F767VGT6 include an Arm Cortex-M7 core operating up to 216 MHz, 1 MB of Flash, 512 KB of RAM, and an integrated floating-point unit. The family also includes cache, SDRAM support, TFT interfaces, JPEG acceleration, DFSDM, and an ART accelerator according to the supplied manufacturer-family and distributor references. These resources support responsive control loops and multimedia data movement.
The STM32F767VG family devices share a common high-performance architecture. Compared with a Cortex-M3-class MCU, the Cortex-M7 core provides a stronger foundation for signal processing, communications, and control. Cache and accelerator features can improve execution around data-intensive workloads, but firmware, memory placement, peripheral configuration, and real-time timing still require careful validation.
Typical uses include industrial automation, connected equipment, motor control, metering, embedded IoT devices, human-machine interfaces, and audio or image-processing systems. The 1 MB Flash capacity can hold a substantial application and protocol stack, while 512 KB of RAM supports buffered data. Exact peripheral availability, pin multiplexing, electrical limits, and memory-map behavior must be checked in the manufacturer datasheet before schematic capture.
A key design step is allocating pins according to the selected package and complete peripheral-alternative functions. Because this MCU combines many interfaces, conflicting assignments can move a signal from a timer output, analog input, communication pin, or high-speed interface to another pad. Power, decoupling, clock, boot, reset, and exposed-pad requirements should therefore be implemented exactly as specified by STMicroelectronics.
This page combines verified manufacturer and distributor specifications with sourcing context and engineering guidance. It also distinguishes verified facts from missing parametric, pinout, price-tier, and compliance details so engineers can assess fit without treating unverified information as production-ready data.
Drop-in-Alternativen für STM32F767VGT6 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit STM32F767VGT6 (gleiche Bauform und Footprint) – abweichend in Package, Core, SRAM, Operating Temperature, ADC.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
STM32F405VGT6TR
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$8.1 / Stück
Datenblatt ansehen →STM32F429VGT6
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$10.85 / Stück
Datenblatt ansehen →STM32F407VGT6TR
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$7.55 / Stück
Datenblatt ansehen →STM32F103VGT7
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$8.6 / Stück
Datenblatt ansehen →STM32F765VGT6
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$4.7177 / Stück
Datenblatt ansehen →STM32F767VGT6 Grenzwerte & elektrische Eigenschaften
| Product Type | ARM Cortex-M7 MCU with FPU |
| Processor Core | Arm Cortex-M7 32-bit RISC core |
| Maximum CPU Frequency | 216 MHz |
| Flash Memory | 1 MB (1M x 8) |
| RAM Memory | 512 KB |
| Performance | 462 DMIPS |
| Gehäuse | 100-pin LQFP (14 x 14 mm) |
| Montageart | Surface mount |
| Supply Voltage Range | 1.7 V to 3.6 V |
| Supported Supply Levels | 1.8 V, 2.5 V, and 3.3 V |
| Betriebstemperaturbereich | -40 °C to +85 °C |
| L1 Cache | Present |
| DSP and Floating-Point Support | DSP and integrated FPU |
| ART Accelerator | Present |
| SDRAM Interface | Present |
| TFT Interface | Present |
| JPEG Codec | Present |
| DFSDM | Present |
| ECCN | US3A991.a.23 |
STM32F767VGT6 100-pin lqfp (14 x 14 mm) Pinbelegungsleitfaden
Pinbelegung für STM32F767VGT6 (100-pin lqfp (14 x 14 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für STM32F767VGT6.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
STM32F767VGT6 ist geeignet für 6 Anwendungs: Industrial Automation Controller, Motor Control and Digital Power, Industrial Metering and Data Gateway, Embedded Human-Machine Interface, Audio and DSP Processing, Connected IoT Edge Device.
Industrial Automation Controller
The STM32F767VGT6 fits industrial automation when a machine controller needs more computation and memory than a basic MCU. Its 216 MHz Arm Cortex-M7 core, 462 DMIPS performance class, 1 MB Flash, and 512 KB RAM provide room for control algorithms, diagnostics, communications, and a human-machine interface. The 100-pin LQFP package also offers more assigned pads than many compact MCUs, which helps when timers, analog channels, and multiple serial interfaces must coexist. Designers should map every required signal against the official alternate-function table, retain suitable derating for industrial temperature and supply conditions, and validate control-loop timing under worst-case peripheral load.
Empfohlen
Motor Control and Digital Power
The STM32F767VGT6 is suitable for sophisticated motor-control and digital-power prototypes because its Cortex-M7 FPU can execute time-sensitive control mathematics at up to 216 MHz. The 1 MB Flash supports a larger control program and diagnostics, while 512 KB RAM helps hold command loops and sampled data. A practical design would assign timer channels for motor-control outputs, use supported analog peripherals for current and position feedback, and isolate noisy switching stages from sensitive signal paths. Performance claims must be confirmed against the exact pin assignments, timer instances, analog channels, and application-specific timing budget in the STMicroelectronics documentation.
Empfohlen
Industrial Metering and Data Gateway
The STM32F767VGT6 can serve as the processing center of a metering gateway when it must combine sensor acquisition, local storage, communications, and protocol conversion. Its 1 MB Flash and 512 KB RAM provide more application headroom than entry-level devices, and the 216 MHz core can service multiple data paths without relying only on a low-power MCU architecture. Designers can map supported serial interfaces to a local bus and use an Ethernet transceiver companion where required. Verify baud-rate, DMA, cache, and buffer behavior on the target board because sustained communications and simultaneous peripheral activity can expose timing or memory-bandwidth issues not visible from headline frequency alone.
Empfohlen
Embedded Human-Machine Interface
The STM32F767VGT6 is a logical candidate for an embedded human-machine interface because its Cortex-M7 core, cache, ART accelerator, SDRAM support, TFT interface, and JPEG capability can help manage graphical workloads. The 1 MB Flash and 512 KB RAM allow a more capable local interface than a minimal microcontroller, especially when assets are stored in external memory. A practical design should use the documented TFT and memory interfaces, separate display buses from noisy timing signals, and budget DMA bandwidth for frame updates. Validate LCD timing, camera or image interfaces, and external-memory mapping against the selected board configuration before committing to production.
Empfohlen
Audio and DSP Processing
The STM32F767VGT6 can support audio front ends and embedded signal-processing functions because the Cortex-M7 core includes floating-point and DSP capability. At up to 216 MHz, the MCU has substantially more performance headroom than basic control devices, while DFSDM support can assist with suitable digital microphone or sigma-delta signal paths. The 100-pin package provides more assignment options for audio-control signals and communications. Exact use depends on supported converters, DMA channels, sample rates, latency, and pin multiplexing. Firmware should include bounded DMA buffers and cache-coherency handling where relevant, and analog front-end layout must minimize switching-node and digital-clock coupling.
Empfohlen
Connected IoT Edge Device
The STM32F767VGT6 can act as a connected IoT edge controller when a product combines real-time acquisition with protocol handling and local logic. Its 1 MB Flash supports a larger firmware image than entry-level MCUs, and 512 KB RAM provides space for buffers and stateful communications. A practical design can assign supported connectivity interfaces to a module, sensor bus, or local Ethernet interface, while the Cortex-M7 handles application logic and control. Because this is a high-performance MCU rather than an ultra-low-power part, battery-operated designs must calculate active current and idle-state expectations from the exact power modes in the datasheet. Radio certification and cloud security remain separate system-level concerns.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für STM32F767VGT6 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | STM32F405VGT6TR | STM32F429VGT6 | STM32F407VGT6TR | STM32F103VGT7 | STM32F765VGT6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP | 100-pin LQFP | 100-pin LQFP | 100-pin LQFP | 100-pin LQFP |
Wichtigste Unterscheidungsmerkmale
- Higher verified performance ceiling (vs. STM32F103VGT7)
- Larger verified memory configuration (vs. STM32F103VGT7)
- Multimedia and high-speed memory-oriented feature set (vs. STM32F765VGT6)
Designhinweise
Use the manufacturer power-supply scheme and place required decoupling components directly at the associated supply pins. The verified operating range is 1.7 V to 3.6 V, but that does not establish every internal-regulator, I/O, or timing condition. Review analog, digital, and external-memory supplies separately, validate startup sequencing, and keep high-current switching loops away from sensitive inputs. Do not infer capacitor values from generic STM32 examples; use the values and layout constraints in the current STMicroelectronics datasheet.
Begin pin assignment with all mandatory power, ground, reset, boot, clock, and programming/debug functions, then map each application peripheral to its alternate-function pads. The 100-pin LQFP provides many options, but peripheral multiplexing can create collisions. After placement, run package-aware checks for differential pairs, high-speed buses, external-memory routing, and decoupling return paths. A candidate replacement must be checked pad by pad rather than inferred from its LQFP-100 outline.
A common mistake is treating any same-package STM32 as electrically and firmware drop-in compatible. The CPU core, peripheral mix, alternate functions, clock tree, memory organization, and electrical limits may differ even when the package has 100 pins. For a redesign or alternate sourcing, compare the official STMicroelectronics datasheets and migration documentation, then retest bootloader, drivers, timing, and all board interfaces. The supplied cross-reference search does not establish a validated direct replacement for STM32F767VGT6.
Route clock and communication signals according to the manufacturer’s reference layouts and maintain continuous return paths beneath high-speed interfaces. Cache and DMA can improve throughput but can also expose coherency and bus-contention problems in firmware. Use bounded buffers, document memory regions, and test sustained transfers at the intended clock rate. For analog or audio functions, isolate converters from digital clocks and power-converter switching nodes, following the device-specific decoupling and grounding recommendations.
Compliance-Informationen
The supplied excerpts do not explicitly state compliance claims for RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals compliance.
