STMicroelectronics

STM32G031F8P3TR - 64MHz Cortex-M0+ 64KB Flash | STMicroelectronics

Teilenummer: STM32G031F8P3TR ✓ Aktiv
2.5 V to 3.3 V Vdss 20-pin TSSOP Package 64 MHz Speed 64 KB Memory
MOQ: 1 |

STM32G031F8P3TR Übersicht

The STMicroelectronics STM32G031F8P3TR is a 32-bit ARM Cortex-M0+ microcontroller rated up to 64 MHz, with 64 KB of Flash memory and 8 KB of SRAM, packaged in a 20-pin TSSOP. It belongs to the STM32G0 mainstream microcontroller family and is designed for compact, cost-sensitive embedded control designs. The device combines a 2.5 V to 3.3 V operating supply with integrated microcontroller peripherals for communication, timing, and analog signal acquisition. According to the STMicroelectronics STM32G031F8 product page, the STM32G031x4/x6/x8 devices use a high-performance Arm Cortex-M0+ 32-bit RISC core operating at up to 64 MHz. The STM32G031F8P3TR ordering code identifies the 64 KB Flash configuration in a 20-TSSOP package, making it a practical choice for compact controllers, motor-control systems, USB-connected products, industrial modules, and consumer electronics. Its small TSSOP footprint supports assembly on constrained boards while retaining a conventional MCU programming and debugging workflow. The STM32G0 series is suited to applications that need deterministic embedded processing without the cost or complexity of higher-performance Cortex-M cores. The 64 MHz operating rate supports responsive control loops, protocol handling, and general user-interface logic. The 64 KB Flash area provides room for firmware, boot code, configuration data, and application routines, while the 8 KB SRAM supports working memory and peripheral buffering. The manufacturer product page identifies the STM32G031x4/x6/x8 as mainstream devices based on the Cortex-M0+ architecture; designers should consult the manufacturer datasheet for the exact peripheral map, clock tree, electrical limits, pin multiplexing, and programming details before finalizing a board design. The 20-pin TSSOP package is especially useful for compact OEM controller boards where component height, assembly cost, and PCB area matter. STM32G031F8P3TR can serve as the central controller in a compact industrial sensing module, a small motor controller, a USB peripheral, or a consumer sub-system. Its combination of 64 MHz processing, 64 KB Flash, and 8 KB SRAM balances performance and resource consumption for embedded products that do not require external memory. The device is identified by STMicroelectronics as an STM32G0 mainstream MCU, and the product family is intended for embedded systems requiring low power, compact packaging, and broad peripheral integration. This product page combines the manufacturer product description, distributor package and memory details, replacement guidance, and practical design considerations to support component selection, PCB planning, firmware development, and sourcing decisions.

Drop-in-Alternativen für STM32G031F8P3TR – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit STM32G031F8P3TR (gleiche Bauform und Footprint) – abweichend in Flash Memory, Mounting Type, Package, Core, SRAM.

STMicroelectronics
Flash Memory: 32 KB (32K x 8)
Package: 20-TSSOP
SRAM: 8 KB (with HW parity)
Vergleichen mit STM32G031F8P3TR →
STMicroelectronics
Flash Memory: 32 KB (32K x 8)
Mounting Type: Tube package
Core: Arm Cortex-M0+ 32-bit RISC
Vergleichen mit STM32G031F8P3TR →
STMicroelectronics
Flash Memory: 64 KB
Mounting Type: Surface mount
Package: 20-pin TSSOP
Vergleichen mit STM32G031F8P3TR →

STM32G031F8P6TR

✅ Drop-In
📦 20-pin TSSOP
Same STM32G031 family and 20-pin TSSOP listing; ordering suffix differs, with flash, SRAM, and pin details requiring confirmation

📋 Referenzalternative (nicht im Katalog)

STM32G031F6P7

✅ Drop-In
📦 20-pin TSSOP
Same STM32G031 family and same-package listing; suffix differences may change flash configuration, qualification, or ordering details

📋 Referenzalternative (nicht im Katalog)

STM32G031F6P6

✅ Drop-In
STMicroelectronics
📦 20-pin TSSOP
Arm Cortex-M0+ 32-bit RISC · 64 MHz · 32 KB (32K x 8) · 8 KB · 1.7 V to 3.6 V · 20-pin TSSOP · Tube package · 2 x USART

Preis auf Anfrage

Datenblatt ansehen →

STM32G031F8P3

✅ Drop-In ⚠️ Spezifikationen ungeprüft
STMicroelectronics
📦 20-pin TSSOP
32-bit Arm Cortex-M0+ microcontroller · 64 MHz · Arm Cortex-M0+ · 32-bit RISC · 64 KB · 64K x 8 · 8 KB · Hardware parity check

Preis auf Anfrage

Datenblatt ansehen →

STM32G030F6P6TR

✅ Drop-In
STMicroelectronics
📦 20-pin TSSOP
Arm Cortex-M0+ · 64 MHz · 32 KB (32K x 8) · 8 KB (with HW parity) · 2.0 V to 3.6 V · 20-TSSOP · Surface Mount · 1 (Standard, Fast, Fast-mode Plus up to 1 Mbit/s)

Preis auf Anfrage

Datenblatt ansehen →

STM32G031F8P3TR Grenzwerte & elektrische Eigenschaften

Core Arm Cortex-M0+
Architecture 32-bit RISC
Maximum CPU Frequency 64 MHz
Flash Memory 64 KB
SRAM 8 KB
Operating Voltage 2.5 V to 3.3 V
Gehäuse 20-pin TSSOP
Montageart Surface Mount
Product Family STM32G0 mainstream
Device Type Microcontroller IC
Manufacturer STMicroelectronics
Ordering Suffix P3TR

STM32G031F8P3TR 20-pin tssop Pinbelegungsleitfaden

Pinbelegung für STM32G031F8P3TR (20-pin tssop-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für STM32G031F8P3TR im 20-pin tssop-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für STM32G031F8P3TR.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

STM32G031F8P3TR ist geeignet für 6 Anwendungs: Compact Industrial Control Module, Small Motor Controller, USB Peripheral and Consumer Electronics, Sensor and IoT Controller, LED Lighting Controller, Battery-Powered Measurement Device.

🏭

Compact Industrial Control Module

The STM32G031F8P3TR fits compact industrial controllers that need deterministic embedded processing without a large microcontroller package. Its Arm Cortex-M0+ core operates up to 64 MHz, while 64 KB of Flash and 8 KB of SRAM provide room for control firmware, parameter storage, and runtime buffers. The 20-pin TSSOP package reduces board area and supports cost-effective surface-mount assembly. Designers should confirm timer, ADC, communication, and GPIO assignments in the manufacturer datasheet before assigning industrial inputs, outputs, and communication lines.

⚡

Small Motor Controller

STM32G031F8P3TR is appropriate for small motor-control subsystems where a compact MCU must execute a control loop and coordinate peripheral functions. The 64 MHz Cortex-M0+ core provides responsive instruction execution, and the 64 KB Flash and 8 KB SRAM support embedded control code, parameters, and status data. The 20-pin TSSOP footprint can save board space in a compact controller. Confirm the required PWM channels, timer architecture, ADC characteristics, pin multiplexing, and thermal conditions in the manufacturer documentation for the specific motor and driver stage.

🔌

USB Peripheral and Consumer Electronics

The STM32G031F8P3TR can serve as the central MCU in compact USB-enabled peripheral and consumer products. Its Cortex-M0+ core at up to 64 MHz is suitable for protocol handling, configuration, and local control, while 64 KB Flash and 8 KB SRAM provide a practical embedded memory budget. The 20-pin TSSOP package supports dense boards and automated assembly. Check the exact USB, bootloader, crystal, and GPIO requirements in the manufacturer datasheet, because peripheral availability and pin assignment depend on the selected STM32G031 variant.

🧩

Sensor and IoT Controller

STM32G031F8P3TR is well suited to compact IoT and sensor-controller boards that must acquire, process, and transmit limited amounts of data. The 64 MHz core can service protocol tasks and control logic, while 64 KB Flash and 8 KB SRAM accommodate firmware, calibration values, and short-lived sensor data. Its small 20-pin TSSOP package enables placement close to sensors and communication hardware. Verify ADC performance, serial-interface pin availability, clocking, and low-power modes in the manufacturer datasheet for the intended sensing chain.

💡

LED Lighting Controller

The STM32G031F8P3TR can implement compact LED-lighting controllers where timing, communication, and user-interface logic must coexist in a small board. Its 64 MHz Cortex-M0+ core supports PWM and control-loop execution, and the 64 KB Flash and 8 KB SRAM are sufficient for embedded lighting firmware and configuration storage. The 20-pin TSSOP footprint allows the controller to be placed close to the LED driver circuitry. Confirm timer channels, PWM resolution, communication peripherals, and output-pin electrical limits in the manufacturer datasheet.

🔋

Battery-Powered Measurement Device

STM32G031F8P3TR is appropriate for compact battery-powered measurement products where the controller must balance processing capability, memory, and board size. The 2.5 V to 3.3 V operating range supports common low-voltage embedded platforms, while the 64 MHz core provides enough throughput for acquisition control and data processing. The 20-pin TSSOP package minimizes footprint and can simplify assembly in high-volume designs. Verify low-power behavior, ADC accuracy, timer resources, and analog pin constraints against the manufacturer datasheet before setting the battery budget.

What are the key specifications of STM32G031F8P3TR that engineers should know?
The STM32G031F8P3TR is a 32-bit Arm Cortex-M0+ microcontroller that operates up to 64 MHz and provides 64 KB of Flash memory with 8 KB of SRAM in a 20-pin TSSOP package. According to the STMicroelectronics STM32G031F8 product page, the STM32G031x4/x6/x8 family is based on the Cortex-M0+ 32-bit RISC core. Distributor listings identify the device as a 2.5 V to 3.3 V microcontroller, making it appropriate for compact embedded systems that require low-power 3.3 V designs and moderate processing performance.
What is the operating voltage of STM32G031F8P3TR?
The STM32G031F8P3TR operates from 2.5 V to 3.3 V. The Arrow product listing identifies the device as a 32-bit Arm Cortex-M0+ RISC MCU with 64 KB Flash and a 2.5 V/3.3 V operating range. The STMicroelectronics STM32G031F8 family page also confirms that the part belongs to the mainstream STM32G031x4/x6/x8 line. For a complete design, check the manufacturer datasheet for internal regulator behavior, GPIO limits, decoupling requirements, and the exact operating conditions for every peripheral.
Where can I download the STM32G031F8P3TR datasheet PDF?
The official manufacturer reference for STM32G031F8P3TR is the STMicroelectronics STM32G031F8 product page at https://www.st.com/en/microcontrollers-microprocessors/stm32g031f8.html. The page provides the product family documentation and links to the relevant technical material. The distributor results also identify an STM32G031F8P3TR datasheet PDF and an Octopart datasheet landing page. Use the manufacturer datasheet for authoritative pin descriptions, electrical characteristics, memory details, clock configuration, and programming information.
Where can I find the STM32G031F8P3TR pinout and TSSOP-20 footprint?
The STM32G031F8P3TR uses a 20-pin TSSOP package, and its pin assignments are documented in the manufacturer datasheet. The verified distributor and manufacturer listings identify the package as 20-TSSOP. Use the manufacturer pin-description table when assigning GPIO, power, ground, reset, and programming signals to PCB tracks, and use the package drawing for land-pattern dimensions and exposed-pad or thermal details where applicable.
How much Flash memory and SRAM does STM32G031F8P3TR have?
The STM32G031F8P3TR provides 64 KB of Flash memory and 8 KB of SRAM. The DigiKey listing describes the device as a 32-bit, 64 MHz Cortex-M0+ microcontroller with 64 KB of Flash, while the Mouser listing specifies 64 Kbytes of Flash and 8 Kbytes of RAM. The 64 KB Flash region is suitable for firmware, configuration data, and application routines, while the 8 KB SRAM supports runtime working memory and peripheral data handling.
What is the maximum operating frequency of STM32G031F8P3TR?
The STM32G031F8P3TR operates at up to 64 MHz. STMicroelectronics states that the STM32G031x4/x6/x8 mainstream microcontrollers use a high-performance Arm Cortex-M0+ 32-bit RISC core operating at up to 64 MHz. This frequency is appropriate for responsive embedded control loops, communication stacks, and compact user-interface logic without requiring a higher-performance Cortex-M processor.
Is STM32G031F8P3TR suitable for motor-control and industrial controller designs?
Yes, STM32G031F8P3TR is suitable for compact motor-control and industrial controller designs that operate from 2.5 V to 3.3 V and need an Arm Cortex-M0+ core at up to 64 MHz. Its 64 KB Flash and 8 KB SRAM fit embedded firmware and control routines, while the 20-pin TSSOP helps reduce PCB footprint. The exact timer outputs, ADC performance, PWM channels, and safety requirements must be confirmed in the manufacturer datasheet for the intended control architecture.
What is the best drop-in replacement for STM32G031F8P3TR?
The closest listed drop-in candidates are STM32G031F8P6TR, STM32G031F6P7, and STM32G031F6P6, all from the STM32G031 family and identified as same-series or same-package alternatives. Their exact electrical and pin compatibility must be checked before substitution because suffix changes can affect temperature grade, flash configuration, or ordering details. The replacement listing explicitly cautions that these parts require datasheet and pinout checks rather than serving as automatic drop-ins.
Can STM32G031F6P7 replace STM32G031F8P3TR?
STM32G031F6P7 is a potential STM32G031-family replacement, but it should not be treated as an automatic drop-in without verification. The replacement guidance identifies STM32G031F6P7 as a same-series or same-package alternative and requires datasheet and pinout checks. A valid substitution must confirm the 20-pin TSSOP footprint, pin multiplexing, Flash capacity, SRAM, operating voltage, temperature range, clock configuration, and required peripheral resources.
What is the difference between STM32G031F8P3TR and STM32G031F8P6TR?
STM32G031F8P3TR and STM32G031F8P6TR are closely related STM32G031 ordering variants, with the final suffix codes used to distinguish ordering and qualification details. The replacement listing identifies STM32G031F8P6TR as a same-series or same-package alternative, but it also requires a full datasheet and pinout check. Verify the exact ordering-code meaning, temperature grade, flash configuration, and any packing or marking differences before using it in production.
When should I choose STM32G031F8P3TR over STM32G030F6P6TR?
Choose STM32G031F8P3TR when the design requires the STM32G031 device family, 64 KB Flash, 8 KB SRAM, and a Cortex-M0+ core operating up to 64 MHz. STM32G030F6P6TR is another STM32G0 option, but its suffix indicates a different device and memory configuration, so it should be selected only after checking the manufacturer documentation. Firmware, peripheral, pinout, and qualification differences can make two STM32G0 devices unsuitable as automatic substitutes.
Is STM32G031F8P3TR the same as STM32G031G8U6?
No. STM32G031G8U6 and STM32G031F8P3TR share the STM32G031 family name, but the ordering codes indicate different package and ordering configurations. The replacement guidance for STM32G031G8U6 specifically identifies program-memory size, pin compatibility, and peripheral-set differences as important selection factors. Use the exact package drawings and manufacturer ordering information before considering any substitution or footprint change.
Where can I buy STM32G031F8P3TR online and what is its price?
Use the Request a Quote form on this page to request STM32G031F8P3TR availability, current pricing, and lead time. The part is listed by major distributors and by LCSC, but commercial terms can change with inventory, quantity, and date. The product identification is a 20-TSSOP STM32G031 device with 64 KB Flash and 8 KB RAM. Provide the exact ordering code STM32G031F8P3TR when requesting a quotation to avoid confusion with related STM32G031 variants.
What is the lead time for STM32G031F8P3TR?
Current lead time for STM32G031F8P3TR should be confirmed through the Request a Quote form on this page. The verified listings show the device as an active mainstream STM32G031 microcontroller in a 20-pin TSSOP package, but lead time depends on order quantity, inventory, regional sourcing, and packaging requirements. Submit the exact MPN and requested quantity so the quote can reflect the current manufacturing and fulfillment situation.
Is STM32G031F8P3TR in stock?
Stock status for STM32G031F8P3TR should be checked through the Request a Quote form on this page, where the current quantity and delivery commitment can be confirmed. The verified product listings identify the MCU as available from multiple channels, but a distributor page alone is not a guarantee of current stock. The exact MPN, quantity, and target delivery region should be included in the quote request.
What development tools are compatible with STM32G031F8P3TR?
The STM32G031F8P3TR is an STM32G0 Cortex-M0+ microcontroller, so compatibility depends on the debugger, programmer, and programming interface supported by the device and its board implementation. The manufacturer documentation should be used to confirm the supported debug and boot configuration. Use the exact 20-pin TSSOP footprint and the pin assignments in the datasheet when designing the programming header, SWD interface, and reset circuit.

Technische Referenzdaten für STM32G031F8P3TR – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose STM32G031F8P3TR for a compact embedded design that requires an Arm Cortex-M0+ core up to 64 MHz, 64 KB Flash, 8 KB SRAM, and a 20-pin TSSOP package. It is a strong fit for industrial modules, small motor controllers, sensor nodes, LED controllers, and USB peripheral products. Consider STM32G031F8P6TR when its exact ordering and qualification details meet the product requirement, but verify the suffix differences before substitution. STM32G031F6P7 and STM32G031F6P6 may suit designs with different memory or ordering requirements, provided the pinout, electrical limits, and peripherals are confirmed. STM32G030F6P6TR is a broader STM32G0 alternative, but it is not an automatic replacement because device configuration and memory differ. Final selection should be based on the exact datasheet, firmware support, qualification requirements, and assembly process.

Vergleich mit Alternativen

Parameter Dieses Produkt STM32G031F8P6TR STM32G031F6P7 STM32G031F6P6 STM32G030F6P6TR
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP
Product Positioning STM32G031 mainstream microcontroller STM32G031 family STM32G031 family STM32G031 family STM32G030 family

Wichtigste Unterscheidungsmerkmale

  • Mainstream STM32G031 device with 64 KB Flash and 8 KB SRAM (vs. STM32G030F6P6TR)
  • Compact 20-pin TSSOP integration (vs. STM32G031G8U6)
  • 64 MHz Cortex-M0+ processing in a low-cost MCU (vs. STM32G031F8P6TR)

Designhinweise

Design the 2.5 V to 3.3 V power rails with the decoupling and startup behavior specified in the manufacturer datasheet. Place the required input and output capacitors close to the appropriate power pins, keep the ground return path continuous, and verify the supply ramp against reset and boot requirements. The 64 MHz operating speed and peripheral configuration should be validated under the intended voltage and temperature conditions before production release.

Use the manufacturer TSSOP-20 land pattern and pin-description table for the PCB footprint. Preserve the package orientation marking, keep the pin-1 side identifiable, and route SWD programming, reset, clock, and ground signals for reliable programming and field service. The compact 20-pin package limits routing flexibility, so assign pins against the final peripheral mix rather than relying on a generic STM32G0 layout.

Do not treat an STM32G031 ordering suffix change as automatically drop-in. Confirm package pinout, Flash and SRAM capacity, voltage range, temperature grade, clock configuration, and peripheral resources against the exact replacement datasheet. The 64 KB Flash and 8 KB SRAM values apply to STM32G031F8P3TR and must not be assumed for related F6 or G0 variants.

For analog sensing, communication, or motor-control connections, isolate sensitive signal routing from fast-switching nodes and keep return paths short. Check the ADC, timer, communication, and pin-multiplexing requirements before finalizing the layout. The Cortex-M0+ core can operate at 64 MHz, so clock distribution and signal-integrity margin should be evaluated on the assembled board rather than inferred only from the nominal frequency.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

Compliance information is not stated in the verified manufacturer or distributor excerpts. Confirm RoHS, REACH, automotive qualification, lead-free, halogen-free, and conflict-minerals status in the manufacturer documentation before release.

Ähnliche Suchanfragen

STM32G031F8P3TR datasheet STM32G031F8P3TR pinout STM32G031F8P3TR datasheet pdf STM32G031F8P3TR equivalent STM32G031F8P3TR replacement STM32G031F8P3TR cross reference STM32G031F8P3TR vs STM32G031F8P6TR STM32G031F8P3TR footprint STM32G031F8P3TR application circuit STM32G031F8P3TR price STM32G031F8P3TR stock STM32G031F8P3TR 20 TSSOP STM32G031F8P3TR 64KB Flash 8KB RAM STMicroelectronics STM32G031F8P3TR STM32G031F8P3TR programming

Verwandte Bauteile & Begriffe

STMicroelectronics STM32G031F8P3TR STM32G031F8 STM32G031x4/x6/x8 STM32G0 Arm Cortex-M0+ 32-bit RISC core 64 MHz 64 KB Flash 8 KB SRAM 20-pin TSSOP STM32G031F8P6TR STM32G031F6P7 STM32G031F6P6 STM32G030F6P6TR 2.5 V to 3.3 V industrial control motor control sensor controller USB peripheral LED lighting controller battery-powered measurement embedded microcontroller surface-mount package
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen