STMicroelectronics

STM32L041K6U6 - 32MHz Cortex-M0+ 32KB MCU | STMicroelectronics

Teilenummer: STM32L041K6U6 ✓ Aktiv
32-pin UFQFPN Package 32 MHz Speed 32 KB (32K x 8 bits) Memory
MOQ: 1 |

STM32L041K6U6 Übersicht

The STMicroelectronics STM32L041K6U6 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller operating at 32 MHz, with 32 KB of Flash memory in a 32-pin UFQFPN package measuring 5 mm by 5 mm. It belongs to the STM32L0 access-line family and is designed for compact embedded systems that require efficient processing, low standby power, and a broad set of serial and analog peripherals.

An ultra-low-power microcontroller is an embedded semiconductor that balances processing capability with minimized energy consumption. The STM32L0 family sits within the hierarchy of 32-bit ARM Cortex-M embedded MCUs, combining a general-purpose core with Flash memory, RAM, analog conversion, timers, communication interfaces, and GPIO in one low-power device. The STM32L041K6U6 is appropriate when a design must occupy little board area and operate from limited energy budgets without requiring a high-performance Cortex-M processor.

The headline characteristics are a 32 MHz Cortex-M0+ core, 32 KB of Flash memory, and a compact 32-pin UFQFPN package. The manufacturer identifies the STM32L041x6 as an access-line ultra-low-power family. Its 32-bit RISC architecture supports efficient control-loop execution, while the 5 mm by 5 mm package supports compact industrial, consumer, sensor, and connected-equipment designs.

The integrated MCU architecture combines the Cortex-M0+ processing core with embedded memory, GPIO, timers, communication peripherals, debug facilities, and an ADC. This integration reduces the component count of a control board by consolidating a processor, memory, and common peripherals in one package. Software development can use the STM32 embedded ecosystem, including configuration tools, peripheral libraries, debug adapters, and established Cortex-M toolchains.

Typical applications include low-power sensor nodes, industrial condition-monitoring equipment, compact access controls, battery-assisted measurement instruments, small motor-control modules, and energy-conscious embedded products. Its small footprint is particularly useful where PCB area is constrained and the system must combine control functions with communications or analog sensing.

Designers should confirm the complete pin assignment, exposed-pad connection, decoupling requirements, operating voltage, and supported temperature grade against the manufacturer datasheet before layout. Because the UFQFPN thermal pad is electrically and thermally significant, the PCB should follow the recommended land pattern and provide adequate ground-plane continuity for stable operation.

This page combines manufacturer specifications, package and ordering-code distinctions, application guidance, and drop-in replacement analysis for engineers evaluating the STM32L041K6U6. It is intended to accelerate component selection, PCB planning, firmware qualification, and second-source assessment.

Drop-in-Alternativen für STM32L041K6U6 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit STM32L041K6U6 (gleiche Bauform und Footprint) – abweichend in Flash Memory, Package, Package Dimensions, Product Type.

STMicroelectronics
Flash Memory: 32 KB
Package: 32-UFQFPN
Package Dimensions: 5 x 5 mm
Vergleichen mit STM32L041K6U6 →

STM32L041K6U6D

✅ Drop-In
📦 UFQFPN-32 (5x5)
Core frequency remains 32 MHz and Flash remains 32 KB, a 0% difference in both headline parameters; ordering-code qualification and temperature details require verification.

📋 Referenzalternative (nicht im Katalog)

STM32L041K6U7

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 UFQFPN-32 (5x5)
The STM32L041K6 base platform, 32 MHz core, and 32 KB Flash remain unchanged at 0%; the U7 ordering code requires temperature-grade comparison.

📋 Referenzalternative (nicht im Katalog)

STM32L041K6U6U7

✅ Drop-In
📦 UFQFPN-32 (5x5)
The same STM32L041K6 architecture, 32 MHz maximum frequency, and 32 KB Flash are retained, a 0% headline difference; verify the extended ordering suffix.

📋 Referenzalternative (nicht im Katalog)

STM32L031K6U6

✅ Drop-In ⚠️ Spezifikationen ungeprüft
STMicroelectronics
📦 UFQFPN-32 (5x5)
32-bit ultra-low-power microcontroller · Arm Cortex-M0+ · 32-bit RISC · 32 MHz · 32 KB · 32K x 8 bits · 32-UFQFPN · 5 x 5 mm

Preis auf Anfrage

Datenblatt ansehen →

STM32L031K6U6D

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 UFQFPN-32 (5x5)
Retains a Cortex-M0+ core at 32 MHz in the same 32-pin UFQFPN family, a 0% frequency difference; verify the D suffix and required peripherals.

📋 Referenzalternative (nicht im Katalog)

STM32L041K6U6 Grenzwerte & elektrische Eigenschaften

Product Type 32-bit ARM Cortex-M0+ microcontroller
Core Architecture Arm Cortex-M0+ 32-bit RISC
Maximum CPU Frequency 32 MHz
Flash Memory 32 KB (32K x 8 bits)
Programmable GPIO Count 27 I/O
Gehäuse 32-pin UFQFPN
Package Dimensions 5 mm x 5 mm
Montageart Surface mount
Product Family STM32L041x6 access line
Power Class Ultra-low-power
Embedded Security AES hardware encryption

STM32L041K6U6 5 mm x 5 mm Pinbelegungsleitfaden

Pinbelegung für STM32L041K6U6 (5 mm x 5 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für STM32L041K6U6 im 5 mm x 5 mm-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für STM32L041K6U6.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

STM32L041K6U6 ist geeignet für 6 Anwendungs: Low-Power Sensor Nodes, Industrial Condition Monitoring, Compact Access Control, Battery-Powered Measurement Instruments, Small Motor and Actuator Control, Connected Energy and Asset Tracking.

🧩

Low-Power Sensor Nodes

The STM32L041K6U6 fits compact sensor nodes because its Arm Cortex-M0+ core executes at 32 MHz while the device belongs to STMicroelectronics' ultra-low-power STM32L0 access line. The 32 KB of Flash supports acquisition logic, local filtering, configuration handling, and communication firmware without requiring a separate memory component. Its 32-pin UFQFPN footprint occupies only 5 mm by 5 mm, leaving room for sensors and radio hardware in a small board. Use the device to support periodic measurement, local threshold decisions, and duty-cycled data transmission. The principal design consideration is selecting sleep or stop modes that reduce average current without exceeding wake-up latency or corrupting an acquisition sequence.

🏭

Industrial Condition Monitoring

The STM32L041K6U6 is appropriate for industrial condition-monitoring modules that combine periodic sampling with local event detection. Its 32-bit Cortex-M0+ architecture at 32 MHz can handle timers, digital filtering, status logging, and communication state machines, while 32 KB of Flash provides space for embedded control and diagnostic firmware. The small 5 mm by 5 mm UFQFPN package is valuable in densely populated sensor nodes and modular monitoring cards. Use the microcontroller to supervise vibration, temperature, or equipment-state inputs and transmit only meaningful events to reduce network traffic. Validate the exact ordering code against the deployment temperature, and place the exposed pad on a continuous thermal and ground plane according to the package drawing.

🔒

Compact Access Control

The STM32L041K6U6 supports compact access-control terminals where an 8-bit-class controller may be too constrained but a full application processor would be excessive. Its 32 MHz Cortex-M0+ core can execute credential handling, keypad or reader-interface logic, event management, indicator control, and encrypted communication tasks. The 32 KB Flash stores application firmware, while the ultra-low-power family positioning assists battery-operated designs. A 5 mm by 5 mm UFQFPN footprint allows the controller to coexist with a secure element, communications module, and power-management circuitry. During design review, confirm cryptographic implementation requirements, exact peripheral availability, and the expected lockout or standby-current behavior for the target battery source.

🔋

Battery-Powered Measurement Instruments

The STM32L041K6U6 is well suited to handheld or battery-powered measurement instruments that need deterministic control with a small memory and footprint budget. Its Cortex-M0+ processor runs at 32 MHz for timing, data acquisition, calibration, and user-interface tasks, while 32 KB of Flash accommodates compact application code and configuration data. The 5 mm by 5 mm UFQFPN package allows the controller to sit beside precision converters, displays, and protection circuitry. Use the MCU's low-power modes between measurements to extend battery life and use a crystal or external clock when measurement accuracy requires a stable time base. Power-loss behavior, brownout thresholds, ADC accuracy, and the memory map should be verified against the exact datasheet revision during design qualification.

⚙️

Small Motor and Actuator Control

The STM32L041K6U6 can serve as the supervisory controller in compact motor and actuator modules where fast general-purpose processing is not required. Its 32 MHz Cortex-M0+ core is suited to PWM generation, encoder or position-signal monitoring, fault-state logic, and communication with a higher-level controller. The integrated microcontroller package reduces the board area needed for control, timing, and digital I/O, while the ultra-low-power family positioning supports efficient standby behavior in portable systems. Use the MCU to coordinate actuators and apply limits to movement commands. Confirm that the required timers, pin mapping, ADC channels, and safety shutdown paths match the target application, and provide local hardware shutdown because firmware alone should not be the sole protection for a moving mechanism.

📡

Connected Energy and Asset Tracking

The STM32L041K6U6 is appropriate for compact energy-metering or asset-tracking modules that must periodically process sensor data and communicate through a serial interface. Its 32-bit Cortex-M0+ core at 32 MHz can manage timestamping, event filtering, local counters, and communication protocols, while 32 KB of Flash constrains firmware planning but remains practical for focused applications. The 5 mm by 5 mm UFQFPN package helps minimize the size of the tracking electronics. Use the microcontroller to collect measurements, maintain operating state, and activate the radio only when needed. Review the exact serial-peripheral configuration, low-power wake sources, Flash endurance expectations, and supply-current profile because these factors have a direct impact on field lifetime and battery replacement intervals.

What is the STM32L041K6U6?
The STM32L041K6U6 is a 32-bit Arm Cortex-M0+ microcontroller from STMicroelectronics, operating at up to 32 MHz with 32 KB of Flash memory. It is an ultra-low-power member of the STM32L041x6 access-line family and is packaged in a 32-pin UFQFPN measuring 5 mm by 5 mm. According to the STM32L041K6 product page, the family integrates a high-performance Cortex-M0+ core with peripherals intended for compact, low-energy embedded designs.
What are the key specifications of STM32L041K6U6 that engineers should know?
The STM32L041K6U6 combines a 32 MHz Arm Cortex-M0+ core, 32 KB of Flash, 27 I/O, and AES hardware encryption in a 32-pin 5 mm by 5 mm UFQFPN package. The manufacturer classifies the STM32L041x6 family as an ultra-low-power access line. Its compact footprint and 32-bit RISC architecture make it suitable for embedded controls that need more capability than an 8-bit MCU without carrying the size or power cost of a higher-tier embedded processor.
Where can I download the STM32L041K6U6 datasheet PDF?
The official STM32L041K6U6 technical documentation is available from the STM32L041K6 product page at STMicroelectronics. The product page links the family datasheet and supporting reference material, including package, pin, electrical-characteristic, and programming information. Use the manufacturer datasheet as the controlling document for the final schematic and layout because ordering suffixes can select different commercial, industrial, or extended-temperature options.
Where can I find the STM32L041K6U6 pinout?
The STM32L041K6U6 pinout is defined in the pin-description and package drawings contained in the STM32L041K6 family documentation on the manufacturer product page. The device uses a 32-pin UFQFPN package, so the layout must include the exposed-pad connection and its thermal requirements. Use the pin-description table when assigning GPIO, power, ground, reset, debug, and clock functions rather than relying on another STM32L0 package with a different pin count.
What is the STM32L041K6U6 equivalent to?
The closest same-package equivalents are STM32L041K6U6D, STM32L041K6U7, and STM32L041K6U6U7, subject to temperature-grade and ordering-code verification. The cross-reference data identifies U6D as having the same 32 MHz Cortex-M0+ architecture, 32 KB Flash, and 32-pin UFQFPN configuration. Because ordering suffixes may change qualification or temperature limits, engineers should compare the exact suffix, pin table, exposed-pad requirements, and operating limits before approving a substitution.
What can replace STM32L041K6U6?
A valid replacement must use the same 32-pin UFQFPN footprint and preserve the 32 MHz Cortex-M0+ core, 32 KB Flash configuration, pin functions, and required electrical behavior. STM32L041K6U6D and the listed STM32L041K6U7 ordering options are the closest same-family choices, while STM32L031K6U6 variants offer a related Cortex-M0+ platform. Each candidate requires firmware, timing, peripheral, and temperature-grade review before it can be treated as an unqualified drop-in replacement.
Is STM32L041K6U6 the same as STM32L041K6U6D?
STM32L041K6U6 and STM32L041K6U6D share the same STM32L041K6 base device, 32 MHz Cortex-M0+ core, 32 KB Flash, and 32-pin UFQFPN package in the distributor descriptions. Their ordering codes still require comparison against the manufacturer ordering-information table, particularly for temperature range, qualification, and product-lifecycle conditions. The difference is therefore not a package or core change, but it should not be assumed to be zero without checking the exact suffix.
STM32L041K6U6 vs STM32L031K6U6 - which is better for a low-power sensor node?
Choose the STM32L041K6U6 when the design benefits from its access-line feature set and 32 KB Flash configuration, and choose the STM32L031K6U6 when its lower-cost feature set is sufficient. Both use an Arm Cortex-M0+ architecture and the same 32 MHz operating-class positioning, making the STM32L031K6U6 a candidate footprint-compatible alternative. Final selection depends on the required RAM, peripherals, ADC performance, current consumption, and software-driver support; verify each against the manufacturer documentation.
When should I choose STM32L041K6U6 over STM32L031K6U6?
Choose the STM32L041K6U6 when peripheral breadth, memory capacity, or STM32L0 access-line functionality has priority over minimum device complexity. It provides 32 KB of Flash and is positioned for ultra-low-power embedded applications within the STM32L041x6 family. Select the STM32L031K6U6 only after confirming that its memory and peripheral set covers the sensor, communications, timing, and safety requirements without forcing software or board redesign.
Is STM32L041K6U6 suitable for industrial and battery-powered applications?
Yes, the STM32L041K6U6 is suitable for many industrial, sensor, and battery-powered applications because it is an ultra-low-power 32-bit MCU with 32 KB Flash and a compact 5 mm by 5 mm package. Suitability still depends on the required operating-temperature grade, analog accuracy, wake-up performance, and duty cycle. Confirm the exact suffix's temperature limits and the application's low-power mode behavior before production release.
How much current does the STM32L041K6U6 consume?
The STM32L041K6U6 belongs to an ultra-low-power MCU family, but its current consumption varies with supply voltage, clock configuration, active mode, standby mode, peripheral activity, and operating temperature. The manufacturer product page identifies the family's ultra-low-power positioning, while detailed current values are normally organized by mode in the family datasheet. Request the exact electrical-characteristic figures from the linked manufacturer documentation before sizing a battery.
What tools can program and debug the STM32L041K6U6?
The STM32L041K6U6 is a standard Arm Cortex-M0+ MCU and can be programmed and debugged with an ST-LINK debugger plus STM32CubeProgrammer, or with another debugger and programmer that supports the device's programming interface. The exact connection pins, boot configuration, voltage levels, and programming sequence should be taken from the manufacturer datasheet. Check the bootloader, option bytes, and debug interface requirements before committing a production board layout.
What is the best STMicroelectronics equivalent for STM32L041K6U6?
The best same-brand starting point is STM32L041K6U6D because its distributor description retains the same 32 MHz Cortex-M0+ core, 32 KB Flash, and 32-pin UFQFPN package. Other STM32L041K6U7 ordering options may also fit, but their temperature and qualification requirements must be checked against the target. The replacement is suitable only after verifying the pin table, clock limits, memory, peripherals, package, and firmware dependencies.
Where to buy STM32L041K6U6 online?
Use the Request a Quote form on this XAIPART product page to ask about STM32L041K6U6 availability, current commercial terms, and required order quantities. The manufacturer product page and authorized-channel listings identify STM32L041K6U6 as a 32 MHz, 32 KB Flash STM32L0 microcontroller in UFQFPN packaging. Procurement should request the exact suffix and package dimensions to prevent substitution with a different temperature grade or footprint.
What is the price of STM32L041K6U6?
The current commercial price of STM32L041K6U6 is best obtained through the Request a Quote form on this XAIPART page because pricing can vary with quantity, packaging, and supply conditions. The part is identified by STMicroelectronics as a 32 MHz Cortex-M0+ MCU with 32 KB Flash in a 32-pin UFQFPN package. Request the quantity break, manufacturer lead time, and authorized sourcing conditions when preparing a production BOM.
What is the lead time for STM32L041K6U6?
The current lead time and minimum order quantity for STM32L041K6U6 should be requested through the Request a Quote form on this page. Lead time can vary by order quantity, exact ordering suffix, regional inventory, and manufacturing status. Provide the required delivery date, annual usage, and acceptable package suffix so sourcing can confirm a realistic production schedule rather than relying on a generic catalog estimate.
Is STM32L041K6U6 in stock?
Use the Request a Quote form on this XAIPART page to request the current stock position and delivery schedule for STM32L041K6U6. The manufacturer product page identifies the STM32L041K6U6 as an active member of the STM32L041x6 ultra-low-power family, while actual inventory changes by quantity and region. For production planning, request firm stock, lead time, and lot traceability rather than treating an individual distributor listing as a guaranteed allocation.

Technische Referenzdaten für STM32L041K6U6 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the STM32L041K6U6 for compact embedded products that need a 32 MHz Arm Cortex-M0+ core, 32 KB Flash, AES hardware encryption, and an ultra-low-power operating mode in a 5 mm by 5 mm UFQFPN package. It is a strong fit for sensor nodes, industrial monitoring modules, access-control equipment, and battery-powered instruments. Use STM32L041K6U6D when its exact ordering attributes meet the deployment requirements; the core frequency and Flash capacity remain unchanged. Consider STM32L041K6U7 or STM32L041K6U6U7 when their temperature-grade characteristics better match the application. Use STM32L031K6U6 or STM32L031K6U6D only when their peripheral set and memory resources satisfy every design requirement and firmware validation is acceptable. For all candidates, verify pin compatibility, exposed-pad handling, supply limits, ADC performance, timer resources, boot behavior, debug access, and temperature grade against the manufacturer documentation before treating the substitution as production-ready.

Vergleich mit Alternativen

Parameter Dieses Produkt STM32L041K6U6D STM32L041K6U7 STM32L041K6U6U7 STM32L031K6U6 STM32L031K6U6D
Package 32-pin UFQFPN (5x5 mm) 32-pin UFQFPN (5x5 mm) 32-pin UFQFPN (5x5 mm) 32-pin UFQFPN (5x5 mm) 32-pin UFQFPN (5x5 mm) 32-pin UFQFPN (5x5 mm)
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
CPU Core Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 32 KB 32 KB 32 KB 32 KB 32 KB 32 KB

Wichtigste Unterscheidungsmerkmale

  • 32 KB Flash in a compact 32-pin footprint (vs. STM32L031K6U6)
  • Direct same-family ordering-code alternative (vs. STM32L041K6U6D)
  • AES hardware encryption in the access-line platform (vs. STM32L031K6U6)
  • 32 MHz processing with 27 I/O (vs. STM32L041K6U7)

Designhinweise

Use the exact 32-pin UFQFPN land pattern and exposed-pad geometry from the manufacturer package drawing. Place all decoupling capacitors adjacent to their intended supply pins, provide a short return path for each capacitor, and avoid routing high-speed or high-current signals beneath the device where they can increase coupling. The exposed pad should be connected according to the datasheet recommendation and tied to the appropriate supply or ground structure rather than left floating.

Decouple each required supply rail with the capacitance and ESR range specified by the manufacturer, and account for startup current when the source is a battery or low-current regulator. Place bulk energy storage near the power source and local high-frequency ceramic capacitance near the MCU. Confirm brownout, operating-voltage, and maximum-clock conditions across the full temperature range because low-power operation does not remove the requirement for a stable supply during wake-up and flash writes.

Do not treat a shared package name as proof that every ordering code is automatically interchangeable. Before substituting an STM32L041 or STM32L031 device, compare the complete pin list, exposed-pad connection, voltage limits, temperature grade, ADC channels, timer features, boot options, crystal configuration, Flash organization, RAM, and firmware-driver support. Create a hardware regression test that exercises startup, low-power transitions, ADC accuracy, timers, communications, and debugger attachment.

Keep the ARM SWD programming and debug interface accessible, and route the reset circuit using the recommended components and topology. If an external crystal is used, preserve a short and symmetrical route with a quiet ground reference and keep switching-converter and high-current paths away from the oscillator network. Because the MCU can operate at 32 MHz, inspect the PCB for signal-integrity and electromagnetic-compatibility issues rather than treating the part solely as a low-speed controller.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

No explicit compliance declarations were stated for this exact ordering code. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status on the manufacturer product page and in the current regional product documentation.

Ähnliche Suchanfragen

STM32L041K6U6 datasheet STM32L041K6U6 specifications STM32L041K6U6 pinout STM32L041K6U6 datasheet pdf STM32L041K6U6 equivalent STM32L041K6U6 replacement STM32L041K6U6 cross reference STM32L041K6U6 footprint STM32L041K6U6 price STM32L041K6U6 stock STMicroelectronics STM32L041K6U6 STM32L041K6U6 vs STM32L031K6U6 STM32L041K6U6 UFQFPN pinout STM32L041K6U6 low power application STM32L041K6U6 programming

Verwandte Bauteile & Begriffe

STMicroelectronics STM32L041K6U6 STM32L041K6U6D STM32L041K6U7 STM32L041K6U6U7 STM32L031K6U6 STM32L031K6U6D Arm Cortex-M0+ 32-bit RISC processor ultra-low-power microcontroller embedded microcontroller system-on-chip semiconductor 32 KB Flash memory 32 MHz clock AES hardware encryption UFQFPN-32 QFN package family surface-mount package industrial condition monitoring low-power sensor node battery-powered instrument ADC SWD debugging
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen