Microchip Technology

SY89297UMH - 3.2 Gbps Dual Delay Line | Microchip

Teilenummer: SY89297UMH ✓ Aktiv
2.5 V Vdss 24-pin VFQFN with exposed pad Package
MOQ: 1 |

SY89297UMH Übersicht

The Microchip Technology SY89297UMH is a dual-channel programmable delay line IC supporting data rates through 3.2 Gbps, with two independent delay channels covering a 2 ns to 7 ns range in programmable increments as small as 5 ps. The device is housed in a 24-pin VFQFN exposed-pad package measuring 4 mm by 4 mm.

A programmable delay line is a timing IC that inserts a controlled interval into a signal path while preserving high-speed data transmission characteristics. In the electronic-component hierarchy, a delay line belongs to clock and timing ICs, where it supports phase alignment, data recovery, skew compensation, calibration, and deterministic timing adjustment. The SY89297U family uses precision CML-compatible differential signaling for high-speed clock and data applications.

Each of the two channels contains 1024 programmable taps according to the distributor part description. The 5 ps delay step provides fine timing resolution across the usable range, while monotonic and linear delay behavior supports predictable calibration. The device is designed for 2.5 V or 3.3 V operation, making it suitable for systems that require precise delay adjustment without external passive delay networks.

At data rates through 3.2 Gbps, the SY89297U can compensate for propagation-delay differences introduced by connectors, cables, printed-circuit-board traces, optical paths, clock distribution, or parallel data channels. Its dual-channel architecture permits two delays to be controlled independently, enabling matched timing for differential or parallel signal groups. The small 4 mm by 4 mm package also reduces board area compared with discrete or multi-component delay solutions.

Typical applications include clock de-skewing, high-speed interface alignment, data acquisition timing calibration, communications test equipment, phase adjustment in instrumentation, and synchronization of independent clock domains. The device is particularly relevant where calibrated delay is needed after high-speed signal distribution or where circuit-board and cable delays must be compensated dynamically.

When laying out a design, use the exposed-pad thermal and electrical connection exactly as shown in the manufacturer datasheet, keep the CML input and output return paths compact, and account for input and output termination requirements. The digital configuration interface also requires correct interface voltage levels and signal sequencing; consult the pin-description and application information before assigning the control pins.

This page consolidates the exact package, delay, speed, and programming characteristics of SY89297UMH with procurement guidance, application analysis, design considerations, and a careful assessment of available drop-in alternatives. It also distinguishes the dual-channel SY89297U from the single-channel SY89295U and SY89296U family members.

Drop-in-Alternativen für SY89297UMH – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.

Alternativen anfordern

SY89297UMH Technische Daten

Product Type Dual-channel programmable delay line IC
Number of Channels 2 channels
Maximum Data Rate 3.2 Gbps
Minimum Supply Voltage 2.5 V
Nominal Supply Voltage 3.3 V
Delay Range 2 ns to 7 ns per channel
Delay Step 5 ps
Total Delay Span 5 ns
Programmable Taps 1024 taps
Output Signaling Precision CML
Control Interface Digital configuration interface
Gehäuse 24-pin VFQFN with exposed pad
Package Dimensions 4 mm x 4 mm
Montageart Surface mount
RoHS-Status Compliant

SY89297UMH 4 mm x 4 mm Pinbelegungsleitfaden

Pinbelegung für SY89297UMH (4 mm x 4 mm-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für SY89297UMH im 4 mm x 4 mm-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für SY89297UMH.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

SY89297UMH ist geeignet für 6 Anwendungs: High-Speed Clock Deskewing, Parallel Data Alignment, Communications Interface Calibration, Data Acquisition Timing, Test and Measurement Equipment, FPGA-Based Signal Conditioning.

🌐

High-Speed Clock Deskewing

The SY89297UMH is well suited to correcting relative clock arrival-time differences in systems operating through 3.2 Gbps. Its two independent channels can add calibrated delays of 2 ns to 7 ns in 5 ps steps, allowing an FPGA, serializer, or transceiver to compensate for unequal distribution-network delays. The linear, monotonic delay characteristic gives the control loop a predictable adjustment range. Place the device near the affected clock receiver when trace propagation must be corrected, route the precision CML paths as controlled-impedance differential connections, and implement the digital programming sequence recommended by the manufacturer.

📺

Parallel Data Alignment

The SY89297UMH can align pairs of high-speed data paths whose propagation delays differ because of trace length, connector variation, or unequal internal routing. Two independent 2 ns-to-7 ns delay channels provide a combined adjustment span of 5 ns, with a minimum step of 5 ps. This is useful in parallel data-capture and test systems where eye closure caused by skew must be reduced. The implementation should preserve matched impedance and symmetry between the two signal paths while keeping the exposed pad and high-speed return paths arranged according to the manufacturer layout guidance.

🌐

Communications Interface Calibration

In communications equipment, the SY89297UMH can compensate for delay introduced by cables, connectors, optical paths, and clock-distribution networks. Its operation through 3.2 Gbps and 5 ps programming resolution allow a receiver calibration routine to align a recovered clock against its associated data stream. Both channels remain available for systems that compare or independently delay two related signals. For reliable calibration, characterize the programmed delay over the required temperature range and use the manufacturer timing information to account for source, output, and interconnect effects.

📱

Data Acquisition Timing

The SY89297UMH can provide adjustable timing in laboratory and industrial data-acquisition systems where multiple acquisition channels must be sampled at a common instant. The dual architecture permits two paths to be delayed independently within a 5 ns span, while the 5 ps step supports fine alignment after coarse timing has been established by the rest of the system. Use the device to compensate for deterministic channel skew rather than as a substitute for adequate clock distribution. Validate the complete acquisition chain with the intended sampling equipment and include device and interconnect delay in the calibration sequence.

⚡

Test and Measurement Equipment

The SY89297UMH is useful in test and measurement equipment that requires repeatable timing adjustment for signal integrity analysis, skew characterization, or fixture compensation. Its two channels can be programmed to different delays over the 2 ns-to-7 ns range, allowing a fixture or cable delay to be compensated without substituting long passive delay lines. The 3.2 Gbps capability supports modern high-speed interface testing. Firmware can use the digital configuration interface to implement repeatable delay presets, while laboratory characterization should establish residual delay and temperature behavior across the operating conditions.

🖥️

FPGA-Based Signal Conditioning

An FPGA-based timing system can use the SY89297UMH to compensate for skew that arises between high-speed clocks or data arriving at separate processing domains. By programming two independent delay values in 5 ps increments, the system can perform fine alignment after coarse delay has been handled elsewhere. The device supports data rates through 3.2 Gbps and operates from 2.5 V or 3.3 V, making it adaptable to compact FPGA interface boards. Confirm control-interface levels and sequencing in the datasheet, and preserve differential-impedance routing to avoid converting the delay adjustment into additional signal-integrity errors.

Zusammenfassung der empfohlenen Produkte

SY89295U Single-channel member of the same programmable delay-line family Verwendet in: High-Speed Clock Deskewing, Parallel Data Alignment, Communications Interface Calibration, Data Acquisition Timing, Test and Measurement Equipment, FPGA-Based Signal Conditioning SY89296U Single-channel family option for comparison Verwendet in: High-Speed Clock Deskewing, Communications Interface Calibration, Data Acquisition Timing, Test and Measurement Equipment SY89297U Base ordering designation for the same dual-channel device Verwendet in: Parallel Data Alignment, FPGA-Based Signal Conditioning
What is the Microchip SY89297UMH?
The SY89297UMH is a dual-channel programmable delay line IC designed for signal rates through 3.2 Gbps. According to the Microchip datasheet 20005835A, each channel provides an adjustable delay from 2 ns to 7 ns with a 5 ps minimum delay step. The device uses a 24-pin, 4 mm by 4 mm VFQFN package with an exposed pad and precision CML signaling.
How many independent delay channels does SY89297UMH have?
The SY89297UMH provides two independent programmable delay channels. Each channel can be adjusted over a 2 ns to 7 ns range using increments as small as 5 ps. According to the Microchip SY89297U product information, the two channels can be programmed independently, allowing matched delays for differential or parallel high-speed signal paths.
What is the delay range and resolution of SY89297UMH?
The SY89297UMH covers a 2 ns to 7 ns delay range per channel, producing a 5 ns total span. Its programming resolution is 5 ps, and the manufacturer describes the delay as extremely linear and monotonic over the programming range. These characteristics make the device suitable for precise clock alignment, deskewing, and calibrated timing compensation.
What data rate does SY89297UMH support?
The SY89297UMH supports data rates through 3.2 Gbps. According to Microchip datasheet 20005835A, the device contains two independent 3.2 Gbps delay lines in a 24-pin QFN package. The precision CML interface is intended for high-speed clock, control, and data paths requiring accurate relative delay adjustment.
What supply voltage is required by SY89297UMH?
The SY89297UMH is designed for 2.5 V or 3.3 V operation. Microchip describes the SY89297U as a 2.5 V/3.3 V precision CML dual-channel programmable delay device. Confirm the detailed supply-current, input-level, output-level, and control-interface limits in the manufacturer datasheet before finalizing the power architecture.
Where can I download the SY89297UMH datasheet PDF?
The official SY89297UMH datasheet PDF is available from Microchip at https://ww1.microchip.com/downloads/en/DeviceDoc/20005835A.pdf. The document covers the 2.5 V/3.3 V, 3.2 Gbps precision CML dual-channel programmable delay family. Use its pin-description table, timing diagrams, interface details, and recommended application circuit when assigning and routing the 24 package connections.
Where can I find the SY89297UMH pinout?
The SY89297UMH pinout is shown in Microchip datasheet 20005835A. Because the exposed-pad package includes both perimeter pins and a central thermal pad, the land pattern must be taken directly from the datasheet rather than inferred from a generic QFN drawing. The device uses a 24-pin VFQFN configuration in a 4 mm by 4 mm outline.
What is the best drop-in replacement for SY89297UMH?
No independently verified pin-to-pin replacement for SY89297UMH was identified in the available cross-reference information. The SY89295U and SY89296U are single-channel devices, so they do not match the dual-channel pin configuration and are not drop-in replacements. For an exact functional alternative, review the base SY89297U ordering options and obtain a manufacturer confirmation for the required package and termination arrangement.
Can SY89295U or SY89296U replace SY89297UMH?
No. The SY89295U and SY89296U provide one delay channel each, while the SY89297UMH provides two independent channels in a 24-pin package. Microchip identifies all three as related delay-line solutions, but the different channel count means the single-channel parts are not pin-to-pin drop-in replacements for SY89297UMH.
SY89297UMH vs SY89297U - what is the difference?
SY89297UMH identifies the packaged ordering configuration of the Microchip SY89297U dual-channel delay line, while SY89297U is the base product designation. The core function is the same: two independent delay channels through 3.2 Gbps, a 2 ns to 7 ns range, and 5 ps steps. Verify the exact package code, shipping form, and orderable part number with the manufacturer before substitution.
When should I choose SY89297UMH over a single-channel delay line?
Choose SY89297UMH when two signals require independently controlled delays, such as deskewing a differential or parallel high-speed interface. A single-channel SY89295U or SY89296U would require a second device when both paths need adjustable delay. Use the dual-channel part when its 24-pin footprint, shared control interface, and matched channel implementation fit the board architecture.
Is SY89297UMH suitable for clock and data alignment?
Yes. The SY89297UMH is suitable for clock and data alignment because it provides two independently adjustable channels, a 5 ps programming step, and operation through 3.2 Gbps. According to Microchip, the delay is linear and monotonic across the range, supporting predictable correction for trace, cable, connector, clock-distribution, or parallel-channel propagation differences.
How should SY89297UMH be used in a high-speed PCB layout?
Route the precision CML inputs and outputs as short, impedance-controlled differential paths, and place any required termination close to the corresponding device pins. Connect the exposed pad using the manufacturer land pattern and thermal guidance, and keep the digital configuration interface away from sensitive high-speed nodes. The exact reference plane, termination values, and interface sequencing must follow Microchip datasheet 20005835A.
What controls the delay in SY89297UMH?
The SY89297UMH delay is controlled through its digital configuration interface, which programs the delay-line taps in each channel. The device supports 1024 taps and a minimum programmed increment of 5 ps. Because the control logic and I/O voltage requirements determine host compatibility, use the pin table and programming sequence in Microchip datasheet 20005835A during interface design.
Where can I buy SY89297UMH and what is its lead time?
Use the Request a Quote form on this page to request SY89297UMH pricing, current stock, minimum order quantity, and production lead time. The part is offered in a 24-pin VFQFN exposed-pad configuration for surface-mount assembly. Purchase and availability can change with market conditions, so the quote form provides the current commercial response for the exact ordering code.

Technische Referenzdaten für SY89297UMH – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the SY89297UMH when a design requires two independently adjustable high-speed delay channels, a delay range from 2 ns to 7 ns, and a fine 5 ps programming step. It is particularly appropriate for clock deskewing, parallel-data alignment, communications-path calibration, and compact test equipment operating through 3.2 Gbps. The SY89295U and SY89296U are relevant family options when only one delay channel is required, but they are not pin-to-pin replacements because their channel count and package configuration differ. Before ordering an alternative, confirm the complete pin assignment, termination arrangement, control protocol, exposed-pad layout, operating temperature range, and production status with the manufacturer.

Vergleich mit Alternativen

Parameter Dieses Produkt
Package 24-pin VFQFN with exposed pad, 4 mm x 4 mm
Brand Microchip Technology
Number of Channels 2 independent channels
Maximum Data Rate 3.2 Gbps
Delay Range 2 ns to 7 ns per channel
Minimum Delay Step 5 ps
Total Delay Span 5 ns
Programmable Taps 1024 taps
Supply Voltage 2.5 V or 3.3 V
Output Signaling Precision CML

Designhinweise

Route the precision CML inputs and outputs as short, impedance-controlled differential paths, with any required termination positioned close to the device pins. Keep the two channels geometrically similar when their delays must remain matched. Use the Microchip recommended 24-pin VFQFN land pattern, including the exposed-pad connection, rather than substituting a generic 24-pin QFN footprint.

Treat the input, output, and ground paths as a controlled-impedance system. Avoid long stubs, unnecessary test pads, and copper transitions that can create reflections at rates through 3.2 Gbps. Validate the final board with return-loss, eye, and skew measurements because even a correctly programmed delay cannot compensate for excessive channel loss or reflections.

Do not assume that SY89295U or SY89296U can replace SY89297UMH: those parts are single-channel solutions, while SY89297UMH has two independent channels in a 24-pin package. Also apply the correct termination and logic levels to every interface. A useful programming check is to sweep the delay across its 2 ns-to-7 ns range and verify monotonic behavior at the system level.

Compliance-Informationen

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

RoHS compliance is stated in the component listing. No explicit REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified.

Daten verifiziert am: 2026-11-16 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

SY89297UMH datasheet SY89297UMH pinout SY89297UMH datasheet pdf SY89297UMH equivalent SY89297UMH replacement SY89297UMH cross reference SY89297UMH footprint SY89297UMH price SY89297UMH stock Microchip SY89297UMH SY89297U 3.2 Gbps delay line SY89297U MLF-24 pinout

Verwandte Bauteile & Begriffe

Microchip Technology SY89297UMH SY89297U SY89295U SY89296U programmable delay line delay line IC clock and timing IC timing IC precision CML CML 3.2 Gbps 5 ps delay step 1024 programmable taps 2 ns to 7 ns delay range 24-pin VFQFN QFN package family exposed pad surface-mount assembly clock deskewing parallel data alignment communications timing calibration high-speed signal integrity digital configuration interface
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen