SY89297UMH - 3.2 Gbps Dual Delay Line | Microchip
N.º de pieza: SY89297UMH ✓ ActivoSY89297UMH Descripción general
A programmable delay line is a timing IC that inserts a controlled interval into a signal path while preserving high-speed data transmission characteristics. In the electronic-component hierarchy, a delay line belongs to clock and timing ICs, where it supports phase alignment, data recovery, skew compensation, calibration, and deterministic timing adjustment. The SY89297U family uses precision CML-compatible differential signaling for high-speed clock and data applications.
Each of the two channels contains 1024 programmable taps according to the distributor part description. The 5 ps delay step provides fine timing resolution across the usable range, while monotonic and linear delay behavior supports predictable calibration. The device is designed for 2.5 V or 3.3 V operation, making it suitable for systems that require precise delay adjustment without external passive delay networks.
At data rates through 3.2 Gbps, the SY89297U can compensate for propagation-delay differences introduced by connectors, cables, printed-circuit-board traces, optical paths, clock distribution, or parallel data channels. Its dual-channel architecture permits two delays to be controlled independently, enabling matched timing for differential or parallel signal groups. The small 4 mm by 4 mm package also reduces board area compared with discrete or multi-component delay solutions.
Typical applications include clock de-skewing, high-speed interface alignment, data acquisition timing calibration, communications test equipment, phase adjustment in instrumentation, and synchronization of independent clock domains. The device is particularly relevant where calibrated delay is needed after high-speed signal distribution or where circuit-board and cable delays must be compensated dynamically.
When laying out a design, use the exposed-pad thermal and electrical connection exactly as shown in the manufacturer datasheet, keep the CML input and output return paths compact, and account for input and output termination requirements. The digital configuration interface also requires correct interface voltage levels and signal sequencing; consult the pin-description and application information before assigning the control pins.
This page consolidates the exact package, delay, speed, and programming characteristics of SY89297UMH with procurement guidance, application analysis, design considerations, and a careful assessment of available drop-in alternatives. It also distinguishes the dual-channel SY89297U from the single-channel SY89295U and SY89296U family members.
Alternativas directas para SY89297UMH — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
No hay alternativas directas disponibles para este producto.
Solicitar alternativasSY89297UMH Especificaciones
| Product Type | Dual-channel programmable delay line IC |
| Number of Channels | 2 channels |
| Maximum Data Rate | 3.2 Gbps |
| Minimum Supply Voltage | 2.5 V |
| Nominal Supply Voltage | 3.3 V |
| Delay Range | 2 ns to 7 ns per channel |
| Delay Step | 5 ps |
| Total Delay Span | 5 ns |
| Programmable Taps | 1024 taps |
| Output Signaling | Precision CML |
| Control Interface | Digital configuration interface |
| Encapsulado | 24-pin VFQFN with exposed pad |
| Package Dimensions | 4 mm x 4 mm |
| Tipo de montaje | Surface mount |
| Estado RoHS | Compliant |
Guía de configuración de pines de SY89297UMH 4 mm x 4 mm
Configuración de pines para SY89297UMH (encapsulado 4 mm x 4 mm). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para SY89297UMH.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
SY89297UMH es adecuado para 6 aplicacións: High-Speed Clock Deskewing, Parallel Data Alignment, Communications Interface Calibration, Data Acquisition Timing, Test and Measurement Equipment, FPGA-Based Signal Conditioning.
High-Speed Clock Deskewing
The SY89297UMH is well suited to correcting relative clock arrival-time differences in systems operating through 3.2 Gbps. Its two independent channels can add calibrated delays of 2 ns to 7 ns in 5 ps steps, allowing an FPGA, serializer, or transceiver to compensate for unequal distribution-network delays. The linear, monotonic delay characteristic gives the control loop a predictable adjustment range. Place the device near the affected clock receiver when trace propagation must be corrected, route the precision CML paths as controlled-impedance differential connections, and implement the digital programming sequence recommended by the manufacturer.
Recomendado
Parallel Data Alignment
The SY89297UMH can align pairs of high-speed data paths whose propagation delays differ because of trace length, connector variation, or unequal internal routing. Two independent 2 ns-to-7 ns delay channels provide a combined adjustment span of 5 ns, with a minimum step of 5 ps. This is useful in parallel data-capture and test systems where eye closure caused by skew must be reduced. The implementation should preserve matched impedance and symmetry between the two signal paths while keeping the exposed pad and high-speed return paths arranged according to the manufacturer layout guidance.
Recomendado
Communications Interface Calibration
In communications equipment, the SY89297UMH can compensate for delay introduced by cables, connectors, optical paths, and clock-distribution networks. Its operation through 3.2 Gbps and 5 ps programming resolution allow a receiver calibration routine to align a recovered clock against its associated data stream. Both channels remain available for systems that compare or independently delay two related signals. For reliable calibration, characterize the programmed delay over the required temperature range and use the manufacturer timing information to account for source, output, and interconnect effects.
Recomendado
Data Acquisition Timing
The SY89297UMH can provide adjustable timing in laboratory and industrial data-acquisition systems where multiple acquisition channels must be sampled at a common instant. The dual architecture permits two paths to be delayed independently within a 5 ns span, while the 5 ps step supports fine alignment after coarse timing has been established by the rest of the system. Use the device to compensate for deterministic channel skew rather than as a substitute for adequate clock distribution. Validate the complete acquisition chain with the intended sampling equipment and include device and interconnect delay in the calibration sequence.
Recomendado
Test and Measurement Equipment
The SY89297UMH is useful in test and measurement equipment that requires repeatable timing adjustment for signal integrity analysis, skew characterization, or fixture compensation. Its two channels can be programmed to different delays over the 2 ns-to-7 ns range, allowing a fixture or cable delay to be compensated without substituting long passive delay lines. The 3.2 Gbps capability supports modern high-speed interface testing. Firmware can use the digital configuration interface to implement repeatable delay presets, while laboratory characterization should establish residual delay and temperature behavior across the operating conditions.
Recomendado
FPGA-Based Signal Conditioning
An FPGA-based timing system can use the SY89297UMH to compensate for skew that arises between high-speed clocks or data arriving at separate processing domains. By programming two independent delay values in 5 ps increments, the system can perform fine alignment after coarse delay has been handled elsewhere. The device supports data rates through 3.2 Gbps and operates from 2.5 V or 3.3 V, making it adaptable to compact FPGA interface boards. Confirm control-interface levels and sequencing in the datasheet, and preserve differential-impedance routing to avoid converting the delay adjustment into additional signal-integrity errors.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para SY89297UMH — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto |
|---|---|
| Package | 24-pin VFQFN with exposed pad, 4 mm x 4 mm |
| Brand | Microchip Technology |
| Number of Channels | 2 independent channels |
| Maximum Data Rate | 3.2 Gbps |
| Delay Range | 2 ns to 7 ns per channel |
| Minimum Delay Step | 5 ps |
| Total Delay Span | 5 ns |
| Programmable Taps | 1024 taps |
| Supply Voltage | 2.5 V or 3.3 V |
| Output Signaling | Precision CML |
Notas de diseño
Route the precision CML inputs and outputs as short, impedance-controlled differential paths, with any required termination positioned close to the device pins. Keep the two channels geometrically similar when their delays must remain matched. Use the Microchip recommended 24-pin VFQFN land pattern, including the exposed-pad connection, rather than substituting a generic 24-pin QFN footprint.
Treat the input, output, and ground paths as a controlled-impedance system. Avoid long stubs, unnecessary test pads, and copper transitions that can create reflections at rates through 3.2 Gbps. Validate the final board with return-loss, eye, and skew measurements because even a correctly programmed delay cannot compensate for excessive channel loss or reflections.
Do not assume that SY89295U or SY89296U can replace SY89297UMH: those parts are single-channel solutions, while SY89297UMH has two independent channels in a 24-pin package. Also apply the correct termination and logic levels to every interface. A useful programming check is to sweep the delay across its 2 ns-to-7 ns range and verify monotonic behavior at the system level.
Información de cumplimiento
RoHS compliance is stated in the component listing. No explicit REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified.