SY89538LHH - 756 MHz LVPECL/LVDS Clock Synthesizer | Microchip
Teilenummer: SY89538LHH ✗ AbgekündigtSY89538LHH Übersicht
A clock synthesizer is a clock-and-timing IC that generates or distributes multiple related clock signals while controlling frequency, phase, and output-bank relationships. Within the broader semiconductor hierarchy, the SY89538LHH belongs to the clock generator and fanout buffer class, which supports PLLs, logic-level translation, and synchronized multi-output clock architectures used in telecommunications, industrial control, instrumentation, and data-processing equipment.
Five independently programmable output banks provide flexible clock distribution from one synchronization core. Logic translation between LVPECL and LVDS allows the same device to connect to clock inputs using either signaling convention. The maximum operating frequency of 756 MHz supports demanding digital systems, while the 2.375 V minimum and 3.6 V maximum supply limits place it in a low-voltage 3.3 V design class. Its operating-temperature range is specified from 0°C to 85°C.
The integrated architecture reduces the number of separate oscillator, divider, translation, and fanout components otherwise required for a multi-clock design. Zero-delay operation makes the device useful where clocks must be phase-aligned rather than merely frequency-aligned. The exposed-pad package provides a thermal path into the PCB, allowing heat to be removed through copper planes without requiring a separate heatsink in typical implementations.
Typical uses include telecommunications line cards, network-interface clock trees, industrial control systems, test equipment, and high-speed digital backplanes. In these systems, the synthesizer can generate related clock outputs, translate LVPECL or LVDS signals, and distribute each output to multiple loads while maintaining controlled relationships among banks.
PCB design should provide a low-impedance ground plane, route high-speed differential clock nets as controlled-impedance pairs, and place decoupling capacitors close to the supply pins. The exposed pad must be connected to the appropriate ground plane and thermally coupled with via arrays. Differential trace length matching, return-path continuity, and isolation from noisy switching nodes are essential for maintaining clock quality and minimizing skew.
This product page combines device specifications, family relationships, package information, practical layout guidance, and application-oriented engineering context. It is intended to help designers determine whether the SY89538LHH architecture matches their required frequency, logic levels, thermal environment, and board-level clock-distribution architecture.
Drop-in-Alternativen für SY89538LHH – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit SY89538LHH (gleiche Bauform und Footprint) – abweichend in Device Type, Mounting Type, Package.
SY89538LHY
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
SY89538LHC
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
SY89538LHZ
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
SY89538LHH Technische Daten
| Device Type | Programmable multiple-output bank clock synthesizer and fanout buffer |
| Zero-Delay Function | Yes |
| Maximum Frequency | 756 MHz |
| Betriebsversorgungsspannung | 2.375 V to 3.6 V |
| Nominal Supply Voltage | 3.3 V |
| Output Logic | LVPECL and LVDS |
| Input Logic | CMOS, HSTL, LVDS, LVPECL, LVTTL, and SSTL |
| Number of Output Banks | 5 independently programmable banks |
| Number of Circuits | 1 |
| PLL | Yes |
| Betriebstemperatur | 0°C to 85°C |
| Gehäuse | 64-TQFP with exposed pad |
| Montageart | SMD surface mount |
| Packaging for SY89538LHH | Tray |
| Series | Precision Edge |
SY89538LHH 64-tqfp with exposed pad Pinbelegungsleitfaden
Pinbelegung für SY89538LHH (64-tqfp with exposed pad-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für SY89538LHH.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
SY89538LHH ist geeignet für 6 Anwendungs: Telecommunications Clock Distribution, Industrial Control Clock Tree, Network Interface Clocking, Test and Measurement Instrumentation, High-Speed Digital Backplane, Synchronous Data Processing.
Telecommunications Clock Distribution
The SY89538LHH fits telecommunications clock-distribution designs that require related LVPECL or LVDS signals to reach several functional blocks. Its five independently programmable output banks replace separate divider and fanout arrangements, while the PLL-based architecture supports frequencies up to 756 MHz. A 3.3 V supply range of 2.375 V to 3.6 V suits low-voltage communications equipment. Use controlled-impedance differential routing, maintain continuous return paths, and couple the exposed pad to ground through a thermal-via array. The main engineering consideration is validating output jitter, skew, fanout loading, and external clock-source quality for the specific line-card architecture.
Empfohlen
Industrial Control Clock Tree
The SY89538LHH can organize a multi-branch clock tree in industrial controllers where several subsystems must operate from related clocks. Its five programmable output banks provide flexible distribution, while compatibility with CMOS, HSTL, LVTTL, LVDS, LVPECL, and SSTL inputs simplifies interfacing with heterogeneous logic families. The 756 MHz ceiling provides substantial performance headroom for digital control fabric and high-speed communication blocks. Its 0°C to 85°C operating range supports many industrial ambient conditions. Validate long-term clock accuracy against component drift and temperature, and provide a low-impedance plane that supports the exposed-pad thermal path.
Empfohlen
Network Interface Clocking
The SY89538LHH is appropriate for network-interface and backplane clocking where multiple LVPECL or LVDS domains require coordinated outputs. Five independently programmable banks allow separate output configurations, and the 756 MHz maximum frequency supports high-speed digital interfaces. The device accepts several differential and single-ended input standards, which can simplify adaptation of an existing reference clock. Zero-delay operation is useful when phase alignment between related outputs is required. Layout should keep clock traces short, use matched differential geometry, avoid stubs, and provide adjacent decoupling. Engineers should also confirm receiver thresholds and common-mode compatibility for every connected logic standard.
Empfohlen
Test and Measurement Instrumentation
The SY89538LHH can serve as the central clock synthesizer and fanout element in modular test and measurement equipment. Multiple independently programmable output banks can feed converters, capture logic, and interface blocks that require related phase and frequency relationships. LVPECL and LVDS outputs suit high-speed instrumentation interconnects, while the input logic options broaden source compatibility. The 756 MHz frequency capability supports demanding test-clock architectures. Designers should characterize additive jitter and deterministic skew at each programmed output and maintain symmetric routing through the 64-TQFP footprint. The exposed pad must be tied to ground according to the manufacturer layout guidance and thermally connected to the board plane.
Empfohlen
High-Speed Digital Backplane
The SY89538LHH is suited to high-speed digital backplanes requiring several synchronized differential clock outputs. Its five programmable banks can support distinct output configurations within one clocking subsystem, and LVPECL or LVDS operation provides compatibility with common high-speed receiver families. Operation up to 756 MHz offers sufficient range for demanding backplane logic. Signal-integrity performance depends on controlled-impedance routing, matched differential lengths, uninterrupted reference planes, and minimized connector transitions. Confirm that each output meets the receiver's voltage and common-mode requirements. Because the device operates only to 85°C in the listed configuration, verify the enclosure temperature and the thermal rise at the exposed pad.
Empfohlen
Synchronous Data Processing
The SY89538LHH can generate and distribute related clocks for synchronous processors, converters, and memory interfaces in high-speed data-processing systems. Its PLL architecture reduces reliance on separate frequency-generation components, and the five output banks provide separate programmable destinations. Maximum frequency of 756 MHz and LVPECL/LVDS outputs support demanding digital timing domains. The key trade-off is that a highly integrated clock tree does not remove the need for careful power and routing design. Place supply-decoupling capacitance at the device pins, keep the exposed pad thermally coupled to a solid ground plane, and verify output jitter after accounting for the external reference clock and distribution losses.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für SY89538LHH – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | SY89538LHY | SY89538LHC | SY89538LHZ |
|---|---|---|---|---|
| Package | 64-TQFP with exposed pad | 64-TQFP | 64-TQFP | 64-TQFP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Device Type | Clock Synthesizer/Fanout Buffer | Clock Synthesizer/Fanout Buffer | Clock Synthesizer/Fanout Buffer | Clock Synthesizer/Fanout Buffer |
| Maximum Frequency | 756 MHz | 756 MHz | 756 MHz | 756 MHz |
| Operating Supply Voltage | 2.375 V to 3.6 V | 2.375 V to 3.6 V | 2.375 V to 3.6 V | 2.375 V to 3.6 V |
| Output Logic | LVPECL and LVDS | LVPECL and LVDS | LVPECL and LVDS | LVPECL and LVDS |
| Input Logic | CMOS, HSTL, LVDS, LVPECL, LVTTL, and SSTL | CMOS, HSTL, LVDS, LVPECL, LVTTL, and SSTL | CMOS, HSTL, LVDS, LVPECL, LVTTL, and SSTL | CMOS, HSTL, LVDS, LVPECL, LVTTL, and SSTL |
| Number of Output Banks | 5 independently programmable banks | 5 independently programmable banks | 5 independently programmable banks | 5 independently programmable banks |
| PLL | Yes | Yes | Yes | Yes |
| Zero-Delay Function | Yes | Yes | Yes | Yes |
Wichtigste Unterscheidungsmerkmale
- Integrated five-bank clock distribution (vs. SY89537L)
- High-speed differential clock support (vs. SY89531LHZ)
- Low-voltage 3.3 V operating class (vs. SY89538LHY)
Designhinweise
Route LVPECL and LVDS clock nets as controlled-impedance differential pairs with symmetrical geometry and a continuous reference plane beneath the pair. Avoid stubs, test-point discontinuities, and routing beneath switching-power nodes. Match differential pair lengths according to the allowable skew of the connected receivers. Place input, output, and decoupling connections directly at the relevant package pins to minimize parasitic inductance and maintain the intended output phase relationships.
Connect the 64-TQFP exposed pad to the ground plane with a dense array of thermal vias and follow the manufacturer pad geometry exactly. The ground plane should provide both an electrical return path and a heat-spreading path. Keep high-current switching paths away from the pad and nearby clock traces. Actual junction temperature depends on clock-output loading, supply voltage, ambient temperature, board construction, and copper area, so validate thermal performance in the assembled enclosure rather than relying on package type alone.
Place the required input and output bypass capacitors immediately beside their associated package pins and connect them to nearby ground vias. Maintain a low-impedance 3.3 V supply within the specified 2.375 V to 3.6 V range. Account for supply-noise interaction with the PLL and output jitter, and avoid sharing narrow supply paths with unrelated switching loads. Confirm capacitor type, voltage rating, and ESR requirements against the manufacturer's stability and layout instructions before releasing the schematic.
Do not select a family member solely from the base MPN because the ordering suffix can identify a different package form, temperature grade, or qualification condition. Before substitution, verify the complete ordering table, 64-TQFP footprint, exposed-pad connection, pin functions, frequency ceiling, supply range, and operating-temperature requirements. Also verify whether the replacement supports zero-delay operation and all five programmable output banks needed by the existing clock tree.
Compliance-Informationen
The device is listed as obsolete. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer's environmental or product-compliance documentation.