SY89538LHH - 756 MHz LVPECL/LVDS Clock Synthesizer | Microchip
MPN: SY89538LHH ✗ 停產SY89538LHH 概覽
A clock synthesizer is a clock-and-timing IC that generates or distributes multiple related clock signals while controlling frequency, phase, and output-bank relationships. Within the broader semiconductor hierarchy, the SY89538LHH belongs to the clock generator and fanout buffer class, which supports PLLs, logic-level translation, and synchronized multi-output clock architectures used in telecommunications, industrial control, instrumentation, and data-processing equipment.
Five independently programmable output banks provide flexible clock distribution from one synchronization core. Logic translation between LVPECL and LVDS allows the same device to connect to clock inputs using either signaling convention. The maximum operating frequency of 756 MHz supports demanding digital systems, while the 2.375 V minimum and 3.6 V maximum supply limits place it in a low-voltage 3.3 V design class. Its operating-temperature range is specified from 0°C to 85°C.
The integrated architecture reduces the number of separate oscillator, divider, translation, and fanout components otherwise required for a multi-clock design. Zero-delay operation makes the device useful where clocks must be phase-aligned rather than merely frequency-aligned. The exposed-pad package provides a thermal path into the PCB, allowing heat to be removed through copper planes without requiring a separate heatsink in typical implementations.
Typical uses include telecommunications line cards, network-interface clock trees, industrial control systems, test equipment, and high-speed digital backplanes. In these systems, the synthesizer can generate related clock outputs, translate LVPECL or LVDS signals, and distribute each output to multiple loads while maintaining controlled relationships among banks.
PCB design should provide a low-impedance ground plane, route high-speed differential clock nets as controlled-impedance pairs, and place decoupling capacitors close to the supply pins. The exposed pad must be connected to the appropriate ground plane and thermally coupled with via arrays. Differential trace length matching, return-path continuity, and isolation from noisy switching nodes are essential for maintaining clock quality and minimizing skew.
This product page combines device specifications, family relationships, package information, practical layout guidance, and application-oriented engineering context. It is intended to help designers determine whether the SY89538LHH architecture matches their required frequency, logic levels, thermal environment, and board-level clock-distribution architecture.
直接替換替代品,適用於 SY89538LHH — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: SY89538LHH (相同外形與佔位) — 差異在於 Device Type, Mounting Type, Package.
SY89538LHY
✅ 直接替換📋 參考替代品(不在目錄中)
SY89538LHC
✅ 直接替換📋 參考替代品(不在目錄中)
SY89538LHZ
✅ 直接替換📋 參考替代品(不在目錄中)
SY89538LHH 規格
| Device Type | Programmable multiple-output bank clock synthesizer and fanout buffer |
| Zero-Delay Function | Yes |
| Maximum Frequency | 756 MHz |
| 工作電源電壓 | 2.375 V to 3.6 V |
| Nominal Supply Voltage | 3.3 V |
| Output Logic | LVPECL and LVDS |
| Input Logic | CMOS, HSTL, LVDS, LVPECL, LVTTL, and SSTL |
| Number of Output Banks | 5 independently programmable banks |
| Number of Circuits | 1 |
| PLL | Yes |
| 工作溫度 | 0°C to 85°C |
| 封裝 | 64-TQFP with exposed pad |
| 安裝類型 | SMD surface mount |
| Packaging for SY89538LHH | Tray |
| Series | Precision Edge |
SY89538LHH 64-tqfp with exposed pad 腳位配置指南
SY89538LHH(64-tqfp with exposed pad 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: SY89538LHH.
請參閱 資料表 以查看完整腳位配置。
典型應用
SY89538LHH 適用於 6 應用s: Telecommunications Clock Distribution, Industrial Control Clock Tree, Network Interface Clocking, Test and Measurement Instrumentation, High-Speed Digital Backplane, Synchronous Data Processing.
Telecommunications Clock Distribution
The SY89538LHH fits telecommunications clock-distribution designs that require related LVPECL or LVDS signals to reach several functional blocks. Its five independently programmable output banks replace separate divider and fanout arrangements, while the PLL-based architecture supports frequencies up to 756 MHz. A 3.3 V supply range of 2.375 V to 3.6 V suits low-voltage communications equipment. Use controlled-impedance differential routing, maintain continuous return paths, and couple the exposed pad to ground through a thermal-via array. The main engineering consideration is validating output jitter, skew, fanout loading, and external clock-source quality for the specific line-card architecture.
推薦
Industrial Control Clock Tree
The SY89538LHH can organize a multi-branch clock tree in industrial controllers where several subsystems must operate from related clocks. Its five programmable output banks provide flexible distribution, while compatibility with CMOS, HSTL, LVTTL, LVDS, LVPECL, and SSTL inputs simplifies interfacing with heterogeneous logic families. The 756 MHz ceiling provides substantial performance headroom for digital control fabric and high-speed communication blocks. Its 0°C to 85°C operating range supports many industrial ambient conditions. Validate long-term clock accuracy against component drift and temperature, and provide a low-impedance plane that supports the exposed-pad thermal path.
推薦
Network Interface Clocking
The SY89538LHH is appropriate for network-interface and backplane clocking where multiple LVPECL or LVDS domains require coordinated outputs. Five independently programmable banks allow separate output configurations, and the 756 MHz maximum frequency supports high-speed digital interfaces. The device accepts several differential and single-ended input standards, which can simplify adaptation of an existing reference clock. Zero-delay operation is useful when phase alignment between related outputs is required. Layout should keep clock traces short, use matched differential geometry, avoid stubs, and provide adjacent decoupling. Engineers should also confirm receiver thresholds and common-mode compatibility for every connected logic standard.
推薦
Test and Measurement Instrumentation
The SY89538LHH can serve as the central clock synthesizer and fanout element in modular test and measurement equipment. Multiple independently programmable output banks can feed converters, capture logic, and interface blocks that require related phase and frequency relationships. LVPECL and LVDS outputs suit high-speed instrumentation interconnects, while the input logic options broaden source compatibility. The 756 MHz frequency capability supports demanding test-clock architectures. Designers should characterize additive jitter and deterministic skew at each programmed output and maintain symmetric routing through the 64-TQFP footprint. The exposed pad must be tied to ground according to the manufacturer layout guidance and thermally connected to the board plane.
推薦
High-Speed Digital Backplane
The SY89538LHH is suited to high-speed digital backplanes requiring several synchronized differential clock outputs. Its five programmable banks can support distinct output configurations within one clocking subsystem, and LVPECL or LVDS operation provides compatibility with common high-speed receiver families. Operation up to 756 MHz offers sufficient range for demanding backplane logic. Signal-integrity performance depends on controlled-impedance routing, matched differential lengths, uninterrupted reference planes, and minimized connector transitions. Confirm that each output meets the receiver's voltage and common-mode requirements. Because the device operates only to 85°C in the listed configuration, verify the enclosure temperature and the thermal rise at the exposed pad.
推薦
Synchronous Data Processing
The SY89538LHH can generate and distribute related clocks for synchronous processors, converters, and memory interfaces in high-speed data-processing systems. Its PLL architecture reduces reliance on separate frequency-generation components, and the five output banks provide separate programmable destinations. Maximum frequency of 756 MHz and LVPECL/LVDS outputs support demanding digital timing domains. The key trade-off is that a highly integrated clock tree does not remove the need for careful power and routing design. Place supply-decoupling capacitance at the device pins, keep the exposed pad thermally coupled to a solid ground plane, and verify output jitter after accounting for the external reference clock and distribution losses.
推薦
推薦產品摘要
工程參考資料,適用於 SY89538LHH — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | SY89538LHY | SY89538LHC | SY89538LHZ |
|---|---|---|---|---|
| Package | 64-TQFP with exposed pad | 64-TQFP | 64-TQFP | 64-TQFP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Device Type | Clock Synthesizer/Fanout Buffer | Clock Synthesizer/Fanout Buffer | Clock Synthesizer/Fanout Buffer | Clock Synthesizer/Fanout Buffer |
| Maximum Frequency | 756 MHz | 756 MHz | 756 MHz | 756 MHz |
| Operating Supply Voltage | 2.375 V to 3.6 V | 2.375 V to 3.6 V | 2.375 V to 3.6 V | 2.375 V to 3.6 V |
| Output Logic | LVPECL and LVDS | LVPECL and LVDS | LVPECL and LVDS | LVPECL and LVDS |
| Input Logic | CMOS, HSTL, LVDS, LVPECL, LVTTL, and SSTL | CMOS, HSTL, LVDS, LVPECL, LVTTL, and SSTL | CMOS, HSTL, LVDS, LVPECL, LVTTL, and SSTL | CMOS, HSTL, LVDS, LVPECL, LVTTL, and SSTL |
| Number of Output Banks | 5 independently programmable banks | 5 independently programmable banks | 5 independently programmable banks | 5 independently programmable banks |
| PLL | Yes | Yes | Yes | Yes |
| Zero-Delay Function | Yes | Yes | Yes | Yes |
主要差異化特點
- Integrated five-bank clock distribution (對比SY89537L)
- High-speed differential clock support (對比SY89531LHZ)
- Low-voltage 3.3 V operating class (對比SY89538LHY)
設計說明
Route LVPECL and LVDS clock nets as controlled-impedance differential pairs with symmetrical geometry and a continuous reference plane beneath the pair. Avoid stubs, test-point discontinuities, and routing beneath switching-power nodes. Match differential pair lengths according to the allowable skew of the connected receivers. Place input, output, and decoupling connections directly at the relevant package pins to minimize parasitic inductance and maintain the intended output phase relationships.
Connect the 64-TQFP exposed pad to the ground plane with a dense array of thermal vias and follow the manufacturer pad geometry exactly. The ground plane should provide both an electrical return path and a heat-spreading path. Keep high-current switching paths away from the pad and nearby clock traces. Actual junction temperature depends on clock-output loading, supply voltage, ambient temperature, board construction, and copper area, so validate thermal performance in the assembled enclosure rather than relying on package type alone.
Place the required input and output bypass capacitors immediately beside their associated package pins and connect them to nearby ground vias. Maintain a low-impedance 3.3 V supply within the specified 2.375 V to 3.6 V range. Account for supply-noise interaction with the PLL and output jitter, and avoid sharing narrow supply paths with unrelated switching loads. Confirm capacitor type, voltage rating, and ESR requirements against the manufacturer's stability and layout instructions before releasing the schematic.
Do not select a family member solely from the base MPN because the ordering suffix can identify a different package form, temperature grade, or qualification condition. Before substitution, verify the complete ordering table, 64-TQFP footprint, exposed-pad connection, pin functions, frequency ceiling, supply range, and operating-temperature requirements. Also verify whether the replacement supports zero-delay operation and all five programmable output banks needed by the existing clock tree.
合規資訊
The device is listed as obsolete. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer's environmental or product-compliance documentation.