SY89826LHI - 1 GHz 22-Output LVDS Fanout Buffer | Microchip
Teilenummer: SY89826LHI ✓ AktivSY89826LHI Übersicht
A fanout buffer is a clock-and-timing IC that receives a source signal and reproduces it across multiple output branches. The SY89826L family uses LVDS, or Low Voltage Differential Signaling, to provide low-noise, low-voltage differential transfer over a board-level interconnect. Its translator function allows the input stage to accept either LVDS or LVPECL signals, providing flexibility when a design receives clocks from different interface domains.
Key features include 22 differential LVDS outputs, a 1:22 fanout ratio, a 2:1 multiplexed input, a 3.3 V supply, and a maximum operating frequency identified as 1 GHz. The manufacturer describes the device as a precision fanout buffer for low-voltage 3.3 V applications requiring a large number of outputs to drive precisely aligned, ultra-low-skew signals. The 64-EP-TQFP package provides 64 electrical positions and an exposed thermal pad for board-level heat spreading.
Typical applications include high-speed backplane clock distribution, parallel data acquisition systems, communications equipment, and test-and-measurement platforms where many synchronized destinations require controlled skew. The 2:1 input mux is useful when two source clocks must be selected into one distribution network. The device is a clock and timing IC rather than a power semiconductor, so a safe operating area curve is not applicable.
Designers should follow the manufacturer datasheet for the input logic thresholds, output termination, decoupling, package land pattern, and exposed-pad connection. Differential pairs should be routed with matched geometry and controlled impedance. The input mux selection and output enable functions must be sequenced to prevent simultaneous switching of incompatible clock sources. This page combines the manufacturer’s product description with distributor identification, application guidance, packaging information, and a conservative comparison framework for engineers evaluating the SY89826L family.
Drop-in-Alternativen für SY89826LHI – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit SY89826LHI (gleiche Bauform und Footprint) – abweichend in Package.
SY89826LHY
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →SY89826LHITR
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
SY89826LHI Technische Daten
| Device Type | Clock fanout buffer, multiplexer, translator IC |
| Funktion | Precision 1:22 LVDS fanout buffer/translator with 2:1 input mux |
| Versorgungsspannung | 3.3 V |
| Maximum Frequency | 1 GHz |
| Input Multiplexer Ratio | 2:1 |
| Fanout Ratio | 1:22 |
| Differential LVDS Output Pairs | 22 pairs |
| Input Logic Types | LVDS or LVPECL |
| Output Logic Type | LVDS |
| Gehäuse | 64-EP-TQFP |
| Montageart | Surface mount |
| Betriebstemperaturbereich | -40°C to +85°C |
| Anzahl der Pins | 64 pins |
| Exposed Pad | Present |
SY89826LHI 64-ep-tqfp Pinbelegungsleitfaden
Pinbelegung für SY89826LHI (64-ep-tqfp-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für SY89826LHI.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
SY89826LHI ist geeignet für 6 Anwendungs: High-Speed Backplane Clock Distribution, Parallel Data-Acquisition Systems, Telecommunications Backplane Equipment, Test and Measurement Equipment, Synchronous Compute and Storage Systems, Redundant Clock Source Selection.
High-Speed Backplane Clock Distribution
The SY89826LHI fits centralized clock distribution where one selected source must reach many parallel destinations. Its 1:22 fanout provides 22 differential LVDS output pairs, while the stated 1 GHz operating specification supports high-speed timing architectures. The 2:1 mux can select between LVDS and LVPECL source domains before distribution. Use controlled-impedance routing and matched differential geometry, and follow the manufacturer application guidance for terminations and exposed-pad layout. The main engineering consideration is maintaining acceptable skew across the complete output network rather than treating the 22 outputs as electrically independent clocks.
Empfohlen
Parallel Data-Acquisition Systems
The SY89826LHI is suitable for acquisition systems that need a common reference delivered to many converters, logic sections, or interface modules. Twenty-two differential LVDS outputs can reduce the number of separate source devices and help create a controlled fanout tree. The device accepts LVDS or LVPECL through its 2:1 multiplexer, allowing a system to select between a local reference and an external source. Designers should model board skew, preserve return-path continuity, and verify each receiver’s termination requirements because the correct electrical result depends on the complete source, trace, and load topology.
Empfohlen
Telecommunications Backplane Equipment
The SY89826LHI can support telecommunications equipment that distributes a common low-skew timing reference across line cards, switching fabrics, and monitoring channels. Its 22 LVDS output pairs suit densely parallel architectures, and the 1 GHz specification provides a clear performance class for board-level clocking. The 2:1 input selection can enable source switching or redundancy. Implementation must account for insertion loss, connector transitions, and receiver termination because package bandwidth alone does not determine end-to-end clock integrity.
Empfohlen
Test and Measurement Equipment
The SY89826LHI is applicable in test and measurement instruments that synchronize many acquisition, excitation, or trigger channels. A single source distributed to 22 differential outputs can provide repeatable clocking across parallel measurement sections. The selectable input stage is useful in systems that must choose an internal reference or an externally supplied clock. For laboratory-grade accuracy, evaluate clock jitter, output skew, channel-to-channel variation, and the loading of each destination rather than relying only on the nominal 1 GHz frequency.
Empfohlen
Synchronous Compute and Storage Systems
The SY89826LHI can serve as a fanout element in systems where processors, converters, or memory interfaces require synchronized command or clock signals. The 22 differential outputs permit one selected source to reach several subsystems while reducing clock-tree complexity. LVDS signaling supports noise-tolerant board-level distribution when implemented with controlled impedance and correct terminations. The key qualification step is to confirm that the required operating frequency, skew budget, input levels, and output loading remain compliant in the complete system, especially around dense connector and package transitions.
Empfohlen
Redundant Clock Source Selection
The SY89826LHI’s 2:1 input multiplexer supports systems in which two clock sources must be selected before being distributed across 22 LVDS outputs. One source could represent a local oscillator while the other is received from an upstream module, allowing controlled source switching without duplicating the entire output stage. The design must define a break-before-make or glitch-free switching strategy and sequence the associated control inputs correctly. Differential output quality and clock continuity should be checked at the actual receiver points because mux transitions can affect downstream timing.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für SY89826LHI – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | SY89826LHY | SY89826LHITR |
|---|---|---|---|
| Package | 64-EP-TQFP | 64-EP-TQFP | 64-EP-TQFP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Device Function | Precision 1:22 LVDS fanout buffer/translator with 2:1 input mux | Precision 1:22 LVDS fanout buffer/translator with 2:1 input mux | Precision 1:22 LVDS fanout buffer/translator with 2:1 input mux |
| Maximum Frequency | 1 GHz | 1 GHz | 1 GHz |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V |
| Output Configuration | 22 differential LVDS output pairs | 22 differential LVDS output pairs | 22 differential LVDS output pairs |
| Input Configuration | 2:1 mux with LVDS or LVPECL input | 2:1 mux with LVDS or LVPECL input | 2:1 mux with LVDS or LVPECL input |
| Order Code | SY89826LHI | SY89826LHY | SY89826LHITR |
Wichtigste Unterscheidungsmerkmale
- Very high fanout in one clock-and-timing device (vs. Single-output clock buffers)
- Integrated source selection without an external mux stage (vs. Separate multiplexer plus fanout-buffer designs)
- High-density differential output capability (vs. Lower-fanout clock buffers)
Designhinweise
Route each LVDS output as a controlled-impedance differential pair with closely matched geometry, uninterrupted reference-plane continuity, and minimal stubs. Follow the manufacturer’s input and output pin arrangement to keep the 22 output branches symmetric where possible. Place receiver terminations near the load rather than creating long unterminated branches, and use the exposed-pad thermal-via pattern specified by Microchip.
Validate source-to-destination timing in the complete board, including mux transition behavior, connector loss, loading, and receiver thresholds. The 1 GHz specification identifies the device’s operating class, but it does not remove the need to control skew across the full clock tree. Use the manufacturer’s recommended terminations and test the selected LVDS or LVPECL source against both operating and unused input conditions.
Decouple the 3.3 V supply close to the device and follow the manufacturer’s specified capacitor network. Keep supply and ground-plane geometry compact around the package, and connect the exposed pad with the recommended thermal-via arrangement. Before release, confirm supply-noise tolerance, startup behavior, and whether control inputs require defined levels during power-up.
Compliance-Informationen
Compliance claims are not stated in the manufacturer product description or distributor records used for this product. The SY89826LHI is identified as an industrial-temperature 64-EP-TQFP clock and timing IC, but no specific environmental or automotive qualification should be assumed.