Microchip Technology

SY89826LHI - 1 GHz 22-Output LVDS Fanout Buffer | Microchip

MPN: SY89826LHI ✓ Nakahanda
3.3 V Vdss 64-EP-TQFP Package 1 GHz Speed
MOQ: 1 |

SY89826LHI Ulas

The Microchip Technology SY89826LHI is a 3.3 V precision 1:22 LVDS fanout buffer and translator with 22 differential LVDS output pairs, a 1 GHz operating specification, and a 2:1 input multiplexer in a 64-pin TQFP exposed-pad package. It is designed for systems that distribute one differential clock or low-skew signal across many destinations while maintaining tightly controlled timing.

A fanout buffer is a clock-and-timing IC that receives a source signal and reproduces it across multiple output branches. The SY89826L family uses LVDS, or Low Voltage Differential Signaling, to provide low-noise, low-voltage differential transfer over a board-level interconnect. Its translator function allows the input stage to accept either LVDS or LVPECL signals, providing flexibility when a design receives clocks from different interface domains.

Key features include 22 differential LVDS outputs, a 1:22 fanout ratio, a 2:1 multiplexed input, a 3.3 V supply, and a maximum operating frequency identified as 1 GHz. The manufacturer describes the device as a precision fanout buffer for low-voltage 3.3 V applications requiring a large number of outputs to drive precisely aligned, ultra-low-skew signals. The 64-EP-TQFP package provides 64 electrical positions and an exposed thermal pad for board-level heat spreading.

Typical applications include high-speed backplane clock distribution, parallel data acquisition systems, communications equipment, and test-and-measurement platforms where many synchronized destinations require controlled skew. The 2:1 input mux is useful when two source clocks must be selected into one distribution network. The device is a clock and timing IC rather than a power semiconductor, so a safe operating area curve is not applicable.

Designers should follow the manufacturer datasheet for the input logic thresholds, output termination, decoupling, package land pattern, and exposed-pad connection. Differential pairs should be routed with matched geometry and controlled impedance. The input mux selection and output enable functions must be sequenced to prevent simultaneous switching of incompatible clock sources. This page combines the manufacturer’s product description with distributor identification, application guidance, packaging information, and a conservative comparison framework for engineers evaluating the SY89826L family.

Mga alternatibo na pwedeng ilagay na SY89826LHI — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok SY89826LHI (parehas na form factor at footprint) — pagkakaiba sa Package.

Microchip Technology
Package: 64-TQFP with exposed pad
Ikabit sa SY89826LHI →

SY89826LHY

✅ Drop-In
Microchip Technology
📦 64-EP-TQFP
Precision LVDS fanout buffer and translator · 3.3 V · 1 GHz · 1:22 · 22 LVDS output pairs · 2:1 · LVDS · Differential clock input

Magkontak para sa presyo

Tingnan ang Datasheet →

SY89826LHITR

✅ Drop-In
📦 64-EP-TQFP
Same 64-EP-TQFP SY89826L family and 22-output LVDS function; tape-and-reel order code differs from the SY89826LHI tray form

📋 Alternatibo na Reference (hindi sa katalogo)

SY89826LHI Mga Spesipikasyon

Device Type Clock fanout buffer, multiplexer, translator IC
Fungsi Precision 1:22 LVDS fanout buffer/translator with 2:1 input mux
Volte ng Pagbibigay 3.3 V
Maximum Frequency 1 GHz
Input Multiplexer Ratio 2:1
Fanout Ratio 1:22
Differential LVDS Output Pairs 22 pairs
Input Logic Types LVDS or LVPECL
Output Logic Type LVDS
Packhaging 64-EP-TQFP
Uri ng Pagpapasok Surface mount
Hanay ng Temperature na Operasyon -40°C to +85°C
Bilang ng Pins 64 pins
Exposed Pad Present

Gabay sa Pin Configuration ng SY89826LHI 64-ep-tqfp

Pin configuration para sa SY89826LHI (64-ep-tqfp package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 64-ep-tqfp package para sa SY89826LHI

Wala ng detalyadong pinout data na magagamit para sa SY89826LHI.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

SY89826LHI ay nararapat para sa 6 aplikasyons: High-Speed Backplane Clock Distribution, Parallel Data-Acquisition Systems, Telecommunications Backplane Equipment, Test and Measurement Equipment, Synchronous Compute and Storage Systems, Redundant Clock Source Selection.

🌐

High-Speed Backplane Clock Distribution

The SY89826LHI fits centralized clock distribution where one selected source must reach many parallel destinations. Its 1:22 fanout provides 22 differential LVDS output pairs, while the stated 1 GHz operating specification supports high-speed timing architectures. The 2:1 mux can select between LVDS and LVPECL source domains before distribution. Use controlled-impedance routing and matched differential geometry, and follow the manufacturer application guidance for terminations and exposed-pad layout. The main engineering consideration is maintaining acceptable skew across the complete output network rather than treating the 22 outputs as electrically independent clocks.

📺

Parallel Data-Acquisition Systems

The SY89826LHI is suitable for acquisition systems that need a common reference delivered to many converters, logic sections, or interface modules. Twenty-two differential LVDS outputs can reduce the number of separate source devices and help create a controlled fanout tree. The device accepts LVDS or LVPECL through its 2:1 multiplexer, allowing a system to select between a local reference and an external source. Designers should model board skew, preserve return-path continuity, and verify each receiver’s termination requirements because the correct electrical result depends on the complete source, trace, and load topology.

🌐

Telecommunications Backplane Equipment

The SY89826LHI can support telecommunications equipment that distributes a common low-skew timing reference across line cards, switching fabrics, and monitoring channels. Its 22 LVDS output pairs suit densely parallel architectures, and the 1 GHz specification provides a clear performance class for board-level clocking. The 2:1 input selection can enable source switching or redundancy. Implementation must account for insertion loss, connector transitions, and receiver termination because package bandwidth alone does not determine end-to-end clock integrity.

🖥️

Test and Measurement Equipment

The SY89826LHI is applicable in test and measurement instruments that synchronize many acquisition, excitation, or trigger channels. A single source distributed to 22 differential outputs can provide repeatable clocking across parallel measurement sections. The selectable input stage is useful in systems that must choose an internal reference or an externally supplied clock. For laboratory-grade accuracy, evaluate clock jitter, output skew, channel-to-channel variation, and the loading of each destination rather than relying only on the nominal 1 GHz frequency.

🖥️

Synchronous Compute and Storage Systems

The SY89826LHI can serve as a fanout element in systems where processors, converters, or memory interfaces require synchronized command or clock signals. The 22 differential outputs permit one selected source to reach several subsystems while reducing clock-tree complexity. LVDS signaling supports noise-tolerant board-level distribution when implemented with controlled impedance and correct terminations. The key qualification step is to confirm that the required operating frequency, skew budget, input levels, and output loading remain compliant in the complete system, especially around dense connector and package transitions.

🔧

Redundant Clock Source Selection

The SY89826LHI’s 2:1 input multiplexer supports systems in which two clock sources must be selected before being distributed across 22 LVDS outputs. One source could represent a local oscillator while the other is received from an upstream module, allowing controlled source switching without duplicating the entire output stage. The design must define a break-before-make or glitch-free switching strategy and sequence the associated control inputs correctly. Differential output quality and clock continuity should be checked at the actual receiver points because mux transitions can affect downstream timing.

What is the SY89826LHI?
The SY89826LHI is a 3.3 V precision LVDS fanout buffer and translator with 22 differential output pairs and a 1:22 fanout ratio. According to the manufacturer datasheet, it also includes a 2:1 input multiplexer that selects between LVDS and LVPECL sources. The device is packaged in a 64-EP-TQFP and is intended for low-skew clock distribution.
What is the operating frequency of the SY89826LHI?
The SY89826LHI supports operation up to 1 GHz. This 1 GHz specification applies to its precision LVDS fanout-buffer function, with 22 differential outputs providing a 1:22 distribution ratio. According to the manufacturer datasheet, the device is designed for 3.3 V systems requiring many precisely aligned, ultra-low-skew signals.
What supply voltage does the SY89826LHI use?
The SY89826LHI operates from a 3.3 V supply. According to the manufacturer datasheet, it is a precision fanout buffer intended specifically for low-voltage 3.3 V applications. Its input accepts LVDS or LVPECL signaling, while its 22 output pairs use differential LVDS to distribute a selected source across a parallel destination network.
How many outputs does the SY89826LHI provide?
The SY89826LHI provides 22 differential LVDS output pairs, creating a 1:22 fanout ratio from one selected input. This makes the device suitable for systems requiring a single clock or control signal to reach many destination circuits. According to the manufacturer datasheet, the outputs are designed to maintain precisely aligned, ultra-low-skew operation.
What is the purpose of the SY89826LHI 2:1 input mux?
The 2:1 input multiplexer allows the SY89826LHI to select one of two source signals for distribution through its 22 LVDS outputs. According to the manufacturer datasheet, the input can be multiplexed from either LVDS or LVPECL. This is useful for clock redundancy, source selection, test modes, and systems that must route one of two timing sources to many loads.
What package does the SY89826LHI use?
The SY89826LHI uses a 64-EP-TQFP surface-mount package with an exposed pad. Distributor records identify the case as 64-EP-TQFP and list 64 pins. The exposed pad should be connected according to the manufacturer’s land-pattern and thermal guidance, and differential signal routing should follow the package pin descriptions in the datasheet.
Where can I download the SY89826LHI datasheet PDF?
The official SY89826L datasheet PDF is available from Microchip Technology at the product document link on this page. It describes the 3.3 V precision 1:22 LVDS fanout buffer, 22 differential outputs, 2:1 LVDS/LVPECL input mux, operating characteristics, and recommended application circuit. Use this manufacturer document when assigning pins and selecting termination.
Where can I find the SY89826LHI pinout?
The SY89826LHI pin assignment is found in the pin-description table of the official manufacturer datasheet. The device is a 64-EP-TQFP with 22 differential LVDS outputs, input-selection functions, power connections, and an exposed pad. Use that table when defining PCB nets and ensure the exposed pad and thermal-via pattern follow the manufacturer’s package drawing.
Is the SY89826LHI suitable for LVDS clock distribution?
Yes, the SY89826LHI is specifically designed for 1:22 LVDS clock and low-skew signal distribution. Its 22 differential LVDS outputs, 1 GHz frequency specification, and selectable LVDS or LVPECL input support high-density parallel systems. Board design must still use controlled-impedance routing, correct differential terminations, and validated clock topology.
Can the SY89826LHI replace a single-output clock buffer?
The SY89826LHI is a direct fit only for a design that already uses the 64-EP-TQFP SY89826L footprint and all 64 device connections. It cannot replace a single-output buffer without changing the PCB because it provides 22 differential outputs, a 2:1 mux, and a 64-pin exposed-pad interface. Confirm pin names, input levels, output terminations, and mux logic before treating it as a substitute.
What is the best drop-in replacement for the SY89826LHI?
The SY89826LHY is the closest identified same-package alternative because it is a 64-EP-TQFP device associated with the same SY89826L family, but its temperature-grade suffix differs. The manufacturer’s ordering information and datasheet must be checked before substitution. No cross-brand device was established as a verified pin-to-pin replacement, so a broader replacement should not be assumed.
Is the SY89826LHI the same as the SY89826LHY?
The SY89826LHI and SY89826LHY belong to the same 64-pin SY89826L device family, but their orderable suffixes indicate different temperature grades. The SY89826LHI is associated with a -40°C to +85°C operating range, while the SY89826LHY suffix must be interpreted from the manufacturer’s ordering table. Verify the grade required by the system before treating the two MPNs as interchangeable.
SY89826LHI versus SY89826LHY: which should I choose?
Choose the SY89826LHI when the required ordering grade matches the -40°C to +85°C industrial temperature range. Choose the SY89826LHY when the system requires the temperature grade represented by that suffix. Both are identified as 64-EP-TQFP clock-driver devices, but suffix, temperature qualification, lifecycle status, and production availability should be confirmed in Microchip’s ordering information.
Where can I buy the SY89826LHI online?
Use the Request a Quote form on this page to ask for SY89826LHI availability, current unit pricing, minimum order quantity, and lead time. The form allows procurement teams to request the exact 64-EP-TQFP orderable MPN without relying on family-level stock information. Availability and quotation terms can change, so request confirmation for the quantity and delivery schedule required.
What is the lead time for the SY89826LHI?
The current lead time for the SY89826LHI should be confirmed through the Request a Quote form on this page. Lead time can vary with quantity, package form, manufacturing status, and supply conditions, and distributor search pages are not a production commitment. Include your forecast quantity and required ship date in the quote request for a useful manufacturing response.
Is the SY89826LHI in stock?
Current SY89826LHI inventory should be confirmed through the Request a Quote form on this page using the exact MPN SY89826LHI. A distributor result indicating that orders ship promptly does not guarantee a fixed allocation for every order quantity. The quote request provides a direct way to obtain current stock, delivery, and minimum-order information for the exact package variant.
How should a 22-output LVDS clock network be laid out?
Route each LVDS pair with closely matched geometry and controlled differential impedance, and place the required receiver terminations according to the manufacturer’s application guidance. Keep the selected input and enable paths away from sensitive output routing, and use a solid ground plane under the device. The exposed pad should follow the recommended thermal-via pattern to improve heat dissipation.
Does the SY89826LHI require a safe operating area rating?
No safe-operating-area rating applies because the SY89826LHI is a clock and timing IC, not a power transistor or power-management IC. Its SOA is therefore not applicable. Thermal and electrical design should instead focus on package power dissipation, supply decoupling, exposed-pad construction, and the differential signal-integrity requirements specified by the manufacturer.
What are the key specifications of the SY89826LHI that engineers should know?
The principal specifications are a 3.3 V supply, 1 GHz maximum operating frequency, 1:22 fanout, 22 differential LVDS output pairs, and a 2:1 input multiplexer. The package is 64-EP-TQFP, and the identified operating range is -40°C to +85°C. The input stage supports LVDS or LVPECL, making the device useful for centralized low-skew clock distribution.

Impormasyon ng Talumpati sa Engineering for SY89826LHI — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the SY89826LHI for a 3.3 V design that requires one selected LVDS or LVPECL source to feed as many as 22 differential LVDS destinations while retaining a compact 64-EP-TQFP implementation. Its 1 GHz operating specification and 2:1 input mux make it particularly useful in dense backplanes, acquisition systems, and synchronized test equipment. Select SY89826LHY only after confirming that its temperature grade matches the system requirement. SY89826LHITR provides the same identified device family in a tape-and-reel order code, making it useful when automated assembly requires reel presentation rather than the tray form associated with SY89826LHI. Because no verified cross-brand pin-to-pin replacement was established, a second-source decision should be based on manufacturer confirmation of footprint, control logic, AC timing, and operating grade rather than function alone.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto SY89826LHY SY89826LHITR
Package 64-EP-TQFP 64-EP-TQFP 64-EP-TQFP
Brand Microchip Technology Microchip Technology Microchip Technology
Device Function Precision 1:22 LVDS fanout buffer/translator with 2:1 input mux Precision 1:22 LVDS fanout buffer/translator with 2:1 input mux Precision 1:22 LVDS fanout buffer/translator with 2:1 input mux
Maximum Frequency 1 GHz 1 GHz 1 GHz
Supply Voltage 3.3 V 3.3 V 3.3 V
Output Configuration 22 differential LVDS output pairs 22 differential LVDS output pairs 22 differential LVDS output pairs
Input Configuration 2:1 mux with LVDS or LVPECL input 2:1 mux with LVDS or LVPECL input 2:1 mux with LVDS or LVPECL input
Order Code SY89826LHI SY89826LHY SY89826LHITR

Pangunahing mga Pagkakaiba

  • Very high fanout in one clock-and-timing device (kumpara saSingle-output clock buffers)
  • Integrated source selection without an external mux stage (kumpara saSeparate multiplexer plus fanout-buffer designs)
  • High-density differential output capability (kumpara saLower-fanout clock buffers)

Talaan ng Disenyo

Route each LVDS output as a controlled-impedance differential pair with closely matched geometry, uninterrupted reference-plane continuity, and minimal stubs. Follow the manufacturer’s input and output pin arrangement to keep the 22 output branches symmetric where possible. Place receiver terminations near the load rather than creating long unterminated branches, and use the exposed-pad thermal-via pattern specified by Microchip.

Validate source-to-destination timing in the complete board, including mux transition behavior, connector loss, loading, and receiver thresholds. The 1 GHz specification identifies the device’s operating class, but it does not remove the need to control skew across the full clock tree. Use the manufacturer’s recommended terminations and test the selected LVDS or LVPECL source against both operating and unused input conditions.

Decouple the 3.3 V supply close to the device and follow the manufacturer’s specified capacitor network. Keep supply and ground-plane geometry compact around the package, and connect the exposed pad with the recommended thermal-via arrangement. Before release, confirm supply-noise tolerance, startup behavior, and whether control inputs require defined levels during power-up.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

Compliance claims are not stated in the manufacturer product description or distributor records used for this product. The SY89826LHI is identified as an industrial-temperature 64-EP-TQFP clock and timing IC, but no specific environmental or automotive qualification should be assumed.

Data napatotohanan sa: 2026-11-10 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

SY89826LHI datasheet SY89826LHI specifications SY89826LHI pinout SY89826LHI datasheet pdf SY89826LHI equivalent SY89826LHI replacement SY89826LHI cross reference SY89826LHI vs SY89826LHY SY89826LHI 64-TQFP package SY89826LHI 1 GHz LVDS SY89826LHI 22 output clock buffer Microchip SY89826LHI SY89826LHI price SY89826LHI stock SY89826LHI LVDS clock distribution

Mga kaugnay na Mga Komponente at mga Tuntunin

Microchip Technology SY89826LHI SY89826L SY89826LHY SY89826LHITR clock fanout buffer clock buffer clock and timing IC LVDS Low Voltage Differential Signaling LVPECL Low Voltage Positive Emitter Coupled Logic 1:22 fanout 2:1 input multiplexer differential LVDS output 1 GHz 3.3 V 64-EP-TQFP TQFP family surface mount exposed pad clock distribution low-skew signaling controlled impedance
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ