Microchip Technology

SY89828LHI - 2:10 1 GHz LVDS Fanout Buffer | Microchip

Teilenummer: SY89828LHI ✗ Abgekündigt
3.3 V Vdss 64-TQFP exposed pad, 10 mm × 10 mm Package 1 GHz Speed
MOQ: 1 |

SY89828LHI Übersicht

The Microchip Technology SY89828LHI is a precision 2:10 LVDS clock fanout buffer with a maximum operating frequency of 1 GHz, supplied in a 64-TQFP exposed-pad package. The device accepts two differential clock inputs and provides twenty differential LVDS output pairs for precisely aligned, low-voltage clock distribution. Its nominal supply voltage is 3.3 V, with a specified operating range of 3.0 V to 3.6 V, and its industrial temperature range extends from -40 °C to +85 °C.

A clock fanout buffer is a clock-and-timing integrated circuit that reproduces one or more incoming clock signals across multiple outputs. It belongs to the hierarchy of clock buffers, clock drivers, clock distribution circuits, timing ICs, and integrated semiconductors. Unlike a point-to-point clock output, a fanout buffer is designed to provide multiple low-skew copies of a reference signal to processors, transceivers, memory interfaces, and other clock-consuming circuits distributed across a complex system.

The SY89828LHI combines a 2:10 input-to-output architecture with differential LVDS signaling. This architecture supports systems that require a common reference distributed to numerous destinations while helping reduce timing uncertainty between receiving circuits. The exposed pad provides a thermal connection beneath the 10 mm by 10 mm package, while the 64-pin configuration accommodates the differential inputs and twenty differential output pairs. The 1 GHz operating frequency makes the device applicable to high-speed digital, communications, networking, and industrial clock-distribution systems.

Precision fanout operation depends on minimizing output-to-output skew as well as supporting signal integrity at the destination device. Differential clock transmission can provide common-mode noise rejection on suitable PCB interconnects, and multiple equalized outputs help maintain consistent clock arrival timing across parallel channels. Designers must still control impedance, provide a continuous reference plane, minimize stub lengths, and terminate unused outputs as required by the system architecture. The SY89828LHI should be evaluated against receiver tolerance, jitter budget, trace length matching, and power-supply integrity at the intended operating frequency.

Typical applications include central clock distribution for communications equipment, synchronization of multiple high-speed processing sections, clock fanout to LVDS-compatible transceivers, and generation of aligned clocks for parallel digital subsystems. Its twenty differential outputs allow a design to distribute a selected reference across many endpoints without using separate single-channel fanout devices. In high-speed systems, buffer placement should follow the physical distribution of receivers because long uncontrolled traces can consume much of the available timing margin.

The primary design consideration is power and signal integrity at the chip level. Decoupling capacitors should be placed close to the supply and ground pins, while the exposed-pad area requires careful via formation and thermal management according to the manufacturer land-pattern guidance. Differential pairs should be routed with continuous impedance-controlled geometry and matched as closely as practical. LVDS output and input topology also requires correct source and receiver termination, otherwise reflections can degrade edge quality despite the buffer's 1 GHz capability.

This product record combines the manufacturer's device description with an application-oriented review of frequency, voltage, packaging, thermal implementation, and clock-distribution design. It also distinguishes the direct replacement listed for the obsolete SY89828LHI from broader Precision Edge devices that may share the clock-buffer category but do not demonstrate the same 64-TQFP pin compatibility. Engineers can use the comparison and guidance to determine whether a drop-in replacement is appropriate and what PCB checks remain necessary.

Drop-in-Alternativen für SY89828LHI – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

SY89828LHYTR

✅ Drop-In
📦 64-TQFP Exposed Pad
Replacement suffix with consistent package, terminals, and performance characteristics; lifecycle and temperature-grade details should be confirmed before use

📋 Referenzalternative (nicht im Katalog)

SY89828LHI Technische Daten

Funktion Precision LVDS clock fanout buffer
Input-to-Output Ratio 2:10
Maximum Operating Frequency 1 GHz
Differential Output Pairs 20 pairs
Nominal Supply Voltage 3.3 V
Minimum Supply Voltage 3.0 V
Maximum Supply Voltage 3.6 V
Betriebstemperaturbereich -40 °C to +85 °C
Gehäuse 64-TQFP exposed pad, 10 mm × 10 mm
Terminal Count 64 terminals
Montageart Surface mount
Logic Standard LVDS
Clock Type Differential clock fanout
Series Precision Edge
Application Classification Industrial

SY89828LHI 64-tqfp exposed pad, 10 mm × 10 mm Pinbelegungsleitfaden

Pinbelegung für SY89828LHI (64-tqfp exposed pad, 10 mm × 10 mm-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für SY89828LHI im 64-tqfp exposed pad, 10 mm × 10 mm-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für SY89828LHI.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

SY89828LHI ist geeignet für 6 Anwendungs: Communications Equipment Clock Distribution, Parallel Processor Synchronization, LVDS Transceiver Clock Fanout, Industrial Backplane Synchronization, High-Speed Digital Subsystem Clock Tree, Precision Test and Measurement Timing.

🌐

Communications Equipment Clock Distribution

The Microchip SY89828LHI fits centralized clock distribution in communications equipment that requires many closely related differential clock destinations. Its 2:10 architecture and twenty differential LVDS output pairs allow a selected reference to reach as many as twenty output pairs, while the 1 GHz capability supports high-speed digital subsystems. The 3.0 V to 3.6 V operating range centers on a nominal 3.3 V supply, matching low-voltage processing environments. Place the buffer near the distribution point, maintain continuous reference planes, and route each differential pair with matched geometry so the available skew and jitter margin is not consumed by PCB propagation differences.

🖥️

Parallel Processor Synchronization

The SY89828LHI can distribute a common differential clock to multiple high-speed processing or interface sections that must begin operation on a shared timing reference. Twenty differential LVDS output pairs provide a practical way to fan a selected input across parallel destinations, while the 1 GHz operating limit accommodates demanding digital clock trees. The design must account for insertion loss, receiver tolerance, return loss, and output-to-output alignment across the board. Use short matched routes from the buffer, avoid unnecessary stubs, and validate the complete distribution path with realistic endpoint loading before treating the timing budget as closed.

📡

LVDS Transceiver Clock Fanout

The SY89828LHI is appropriate when several LVDS-capable transceivers or line cards require aligned reference clocks from one source. Its differential outputs provide twenty pairs, and the 2:10 selection structure gives the system two input choices for routing or redundancy. Differential signaling is useful in systems where common-mode disturbance can affect single-ended clock quality, provided that trace geometry and terminations are implemented correctly. Confirm the electrical characteristics of every receiver, including input threshold, termination, tolerance, and required clock amplitude, and keep the fanout device close enough to the receiving branches to limit losses over the intended 1 GHz operating bandwidth.

🏭

Industrial Backplane Synchronization

The SY89828LHI can serve as a central timing-distribution element in industrial backplanes carrying several related high-speed subsystems. The device operates from a nominal 3.3 V supply across a 3.0 V to 3.6 V range and supports an industrial temperature span of -40 °C to +85 °C. Its twenty differential LVDS output pairs make it useful where numerous cards or endpoints require a consistent reference. Backplane implementation requires strict impedance control, suitable layer transitions, controlled connector loss, and a receiver-aware termination strategy. Environmental testing should include the full board temperature range, power variation, and adjacent switching activity because those conditions affect the usable clock margin.

🔧

High-Speed Digital Subsystem Clock Tree

The SY89828LHI is suitable for a high-speed digital subsystem that needs one selected differential clock reproduced across multiple parallel domains. Its 1 GHz maximum frequency and twenty LVDS output pairs provide a substantial fanout ratio without requiring a bank of unrelated single-output drivers. The exposed-pad 64-TQFP package supports dense placement, but thermal and routing decisions remain important because package power dissipation and simultaneous output activity can affect junction temperature. Derive the exposed-pad via arrangement from the manufacturer land pattern, keep supply and ground connections short, and analyze endpoint timing with realistic loading rather than nominal frequency alone.

📺

Precision Test and Measurement Timing

The SY89828LHI can provide synchronized differential clocks to multiple acquisition, conversion, or processing sections in precision test and measurement equipment. Its twenty LVDS output pairs allow reference distribution to widely separated circuit blocks, while differential routing improves noise immunity when implemented with a continuous reference plane. Operation up to 1 GHz offers substantial bandwidth for high-speed measurement chains, although instrument architectures may impose tighter jitter, skew, and amplitude requirements than general-purpose systems. Establish endpoint-specific timing and noise budgets, characterize the selected input configuration, and verify operation across temperature and supply corners to determine whether the buffer's behavior satisfies the instrument specification.

What is the SY89828LHI?
The SY89828LHI is a Microchip Technology precision 2:10 differential LVDS clock fanout buffer operating up to 1 GHz. According to the Microchip SY89828L product description, it provides twenty differential LVDS output pairs for aligned low-voltage clock distribution. The device operates from a nominal 3.3 V supply within a 3.0 V to 3.6 V range and is packaged in a 64-TQFP exposed-pad configuration measuring 10 mm by 10 mm.
How many clock outputs does the SY89828LHI provide?
The SY89828LHI provides twenty differential LVDS output pairs through its 2:10 fanout architecture. According to the Microchip SY89828L product description, the outputs are intended to deliver precisely aligned clocks in low-voltage 3.3 V systems. Twenty differential pairs allow a single selected clock reference to be distributed across numerous receivers while helping preserve consistent timing relationships across parallel destinations.
What is the maximum frequency of SY89828LHI?
The SY89828LHI supports operation up to 1 GHz. This maximum frequency is identified in the Microchip Technology product listing for the device and in the distributor classification. At 1 GHz, layout quality, differential impedance, receiver tolerance, and clock-jitter margins become central design considerations. Use controlled PCB geometry and appropriate source or receiver termination to preserve edge quality across the complete clock-distribution path.
What is the supply voltage range of SY89828LHI?
The SY89828LHI operates from 3.0 V to 3.6 V with a nominal supply voltage of 3.3 V. The Microchip SY89828L product information identifies the device as intended for low-voltage 3.3 V applications. Keep supply decoupling close to the device and confirm that all connected clock receivers and interface circuits use levels compatible with the 3.3 V LVDS implementation.
Where can I download the SY89828LHI datasheet PDF?
The official SY89828L datasheet and product documentation can be reached through the Microchip Technology SY89828L product page listed on this page. The device uses the same SY89828L family identifier, while the SY89828LHI suffix identifies the specific orderable configuration. Review the manufacturer pin-description table, recommended decoupling, exposed-pad land pattern, and LVDS application guidance before assigning PCB functions or calculating thermal performance.
Where can I find the SY89828LHI pinout?
The SY89828LHI pinout should be taken from the pin-description table in the Microchip SY89828L manufacturer datasheet. This 64-terminal TQFP device includes twenty differential LVDS output pairs, two differential clock inputs, supply connections, and functions associated with the exposed-pad package. Because a complete terminal map is not published in the product summaries, use the manufacturer diagram when routing all 64 pins and the exposed pad.
What is the best drop-in replacement for SY89828LHI?
The SY89828LHYTR is the listed drop-in replacement for the obsolete SY89828LHI, with consistent performance characteristics, terminals, and package. According to the FindIC cross-reference record, replacement does not require modification of the existing board. The two devices are both associated with the Microchip 64-TQFP clock-driver family, but production status and temperature-grade suffix differences should still be confirmed against the manufacturer documentation before production release.
Can SY89828LHYTR replace SY89828LHI on the same PCB?
Yes, the SY89828LHYTR is identified as a complete replacement for the SY89828LHI without PCB modification. The comparison record describes the main performance parameters, functional characteristics, terminals, and package as consistent. A final engineering review should still compare the ordering suffix, lifecycle status, exposed-pad connection, and temperature qualification so that the replacement satisfies the target system's production and environmental requirements.
What can replace SY89828LHI?
The documented replacement for SY89828LHI is the Microchip SY89828LHYTR. It is explicitly described as having consistent terminals, package, and functional characteristics, allowing use without changes to the existing PCB. Other Precision Edge clock buffers may offer related functions, but they should not be treated as drop-in replacements unless their pin maps, package dimensions, supply requirements, output count, and electrical ratings are independently verified.
Is SY89828LHI suitable for high-speed clock distribution?
The SY89828LHI is suitable for high-speed differential clock distribution up to 1 GHz when the complete signal path is designed appropriately. Its 2:10 architecture and twenty LVDS output pairs support aligned distribution across many endpoints. Suitability also depends on cumulative jitter, output skew, input return loss, receiver tolerance, impedance continuity, and termination, which should be evaluated at the system level rather than inferred from operating frequency alone.
SY89828LHI vs SY89854UMG-TR - which is better for a 64-TQFP design?
The SY89828LHI is the better choice when the existing design specifically requires its 2:10 architecture, twenty differential LVDS outputs, 1 GHz operation, and 64-TQFP exposed-pad footprint. The SY89854UMG-TR is a separate active Precision Edge clock-buffer product, and the comparison information does not establish that it has the same package or pinout. Use the manufacturer pin tables before considering it as a substitute.
SY89828LHI vs SY89874AUMG-TR - can the SY89874AUMG-TR be used?
The SY89874AUMG-TR should not be assumed to replace the SY89828LHI without a full pin and parameter comparison. Although the Octopart comparison places both devices in the Precision Edge clock-buffer category, the published comparison does not confirm a common 64-TQFP footprint or identical 2:10 LVDS configuration. The SY89828LHI remains the safer choice for an existing board unless Microchip documentation explicitly confirms electrical and pin compatibility.
When should I choose SY89828LHI over another Precision Edge clock buffer?
Choose the SY89828LHI when a design requires two differential clock inputs, twenty differential LVDS output pairs, operation up to 1 GHz, and a 3.3 V supply in a 64-TQFP exposed-pad package. Its lifecycle status requires a planned replacement for new production, so engineers should use the documented SY89828LHYTR replacement where its suffix and qualification meet project requirements. Select another Precision Edge device only when its architecture and pinout match the actual design.
Where can I buy SY89828LHI and check its price and lead time?
Use the Request a Quote form on this page to request current SY89828LHI pricing, availability, lead time, and minimum order quantity. The device is identified as obsolete in a published comparison record, so procurement should be treated as lifecycle-dependent rather than as a routine active-part purchase. Include the required package suffix and target quantity in the request to obtain the most appropriate quotation and supply status.
What key specifications should engineers know about SY89828LHI?
The SY89828LHI combines a 2:10 input-to-output ratio, twenty differential LVDS output pairs, a 1 GHz maximum frequency, and a nominal 3.3 V supply in a 64-TQFP exposed-pad package. Its operating supply range is 3.0 V to 3.6 V, and its specified temperature range is -40 °C to +85 °C. The package measures 10 mm by 10 mm and requires careful via, thermal, impedance, and termination implementation.

Technische Referenzdaten für SY89828LHI – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the SY89828LHI only when an existing design specifically requires a Microchip 2:10 differential LVDS fanout buffer with twenty output pairs, operation up to 1 GHz, a 3.3 V nominal supply, and the 64-TQFP exposed-pad footprint. Because the device is listed as obsolete, new production should use the documented SY89828LHYTR replacement after confirming lifecycle, temperature-grade, and qualification requirements. Do not substitute the SY89854UMG-TR or SY89874AUMG-TR solely because they are active Precision Edge clock buffers; their output architectures and package compatibility must be checked against the original schematic and manufacturer pin data. For a new design, select the replacement directly if its 2:10 topology, twenty LVDS pairs, 1 GHz limit, and 3.0 V to 3.6 V supply range satisfy the system timing, loading, thermal, and production requirements.

Vergleich mit Alternativen

Parameter Dieses Produkt SY89828LHYTR
Brand Microchip Technology Microchip Technology
Package 64-TQFP Exposed Pad, 10 mm × 10 mm 64-TQFP Exposed Pad
Device Type Precision LVDS Clock Fanout Buffer Precision LVDS Clock Fanout Buffer
Input-to-Output Ratio 2:10 2:10
Maximum Frequency 1 GHz 1 GHz
Differential Output Pairs 20 pairs 20 pairs
Nominal Supply Voltage 3.3 V 3.3 V
Supply Voltage Range 3.0 V to 3.6 V 3.0 V to 3.6 V
Lifecycle Status Obsolete Active
Series Precision Edge Precision Edge

Wichtigste Unterscheidungsmerkmale

  • Direct documented replacement path for an obsolete device (vs. SY89828LHYTR)
  • High fanout in a single clock-buffer package (vs. SY89854UMG-TR)
  • Distinct Precision Edge alternatives are not automatically drop-in devices (vs. SY89874AUMG-TR)

Designhinweise

Route every differential clock pair as a continuous impedance-controlled path with a continuous reference plane and closely matched geometry. Avoid stubs and unnecessary branch points, and keep the fanout buffer positioned to minimize the longest endpoint path. At the 1 GHz operating limit, PCB loss and return loss can materially affect clock amplitude and timing margin even when the device itself is operating within specification.

Construct the exposed-pad thermal and electrical connection using the manufacturer's land-pattern guidance rather than relying on a generic via field. Thermal performance depends on the number and size of vias, copper area, adjacent board layers, and ambient conditions. Validate the final assembly at the highest expected output activity and operating temperature, then check the resulting junction temperature against the device limits.

Do not infer pin compatibility from the Precision Edge family name or from a shared clock-buffer category. The SY89828LHYTR is the documented direct replacement for the SY89828LHI because its package, terminals, and functional characteristics are consistent. Other devices such as the SY89854UMG-TR and SY89874AUMG-TR require independent verification of package dimensions, pin assignment, output count, supply range, and electrical behavior.

Place the supply-decoupling network close to the relevant power and ground pins and provide a low-impedance connection between the device and its local capacitors. Validate startup and shutdown behavior across the complete 3.0 V to 3.6 V supply range. Because a 64-TQFP exposed-pad device combines many high-speed outputs, power-plane and return-current paths should be assessed for simultaneous switching activity.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

Compliance declarations for the specific SY89828LHI orderable configuration require confirmation from Microchip Technology or the relevant regulatory documentation.

Daten verifiziert am: 2026-11-10 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

SY89828LHI datasheet SY89828LHI datasheet pdf SY89828LHI pinout SY89828LHI replacement SY89828LHI equivalent SY89828LHI cross reference SY89828LHI price SY89828LHI stock Microchip SY89828LHI SY89828LHI 64-TQFP footprint SY89828LHI 1 GHz LVDS SY89828LHI clock fanout application SY89828LHI vs SY89854UMG-TR SY89828LHI vs SY89874AUMG-TR

Verwandte Bauteile & Begriffe

Microchip Technology SY89828LHI SY89828L SY89828LHYTR SY89854UMG-TR SY89874AUMG-TR clock fanout buffer clock buffer clock driver clock distribution LVDS Low Voltage Differential Signaling Precision Edge differential clock 1 GHz 2:10 input-to-output ratio 20 differential LVDS output pairs 3.3 V nominal supply 64-TQFP exposed pad TQFP package family surface-mount package industrial temperature range output skew clock jitter differential impedance
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen