SY89828LHI - 2:10 1 GHz LVDS Fanout Buffer | Microchip
料号: SY89828LHI ✗ 停产SY89828LHI 概述
A clock fanout buffer is a clock-and-timing integrated circuit that reproduces one or more incoming clock signals across multiple outputs. It belongs to the hierarchy of clock buffers, clock drivers, clock distribution circuits, timing ICs, and integrated semiconductors. Unlike a point-to-point clock output, a fanout buffer is designed to provide multiple low-skew copies of a reference signal to processors, transceivers, memory interfaces, and other clock-consuming circuits distributed across a complex system.
The SY89828LHI combines a 2:10 input-to-output architecture with differential LVDS signaling. This architecture supports systems that require a common reference distributed to numerous destinations while helping reduce timing uncertainty between receiving circuits. The exposed pad provides a thermal connection beneath the 10 mm by 10 mm package, while the 64-pin configuration accommodates the differential inputs and twenty differential output pairs. The 1 GHz operating frequency makes the device applicable to high-speed digital, communications, networking, and industrial clock-distribution systems.
Precision fanout operation depends on minimizing output-to-output skew as well as supporting signal integrity at the destination device. Differential clock transmission can provide common-mode noise rejection on suitable PCB interconnects, and multiple equalized outputs help maintain consistent clock arrival timing across parallel channels. Designers must still control impedance, provide a continuous reference plane, minimize stub lengths, and terminate unused outputs as required by the system architecture. The SY89828LHI should be evaluated against receiver tolerance, jitter budget, trace length matching, and power-supply integrity at the intended operating frequency.
Typical applications include central clock distribution for communications equipment, synchronization of multiple high-speed processing sections, clock fanout to LVDS-compatible transceivers, and generation of aligned clocks for parallel digital subsystems. Its twenty differential outputs allow a design to distribute a selected reference across many endpoints without using separate single-channel fanout devices. In high-speed systems, buffer placement should follow the physical distribution of receivers because long uncontrolled traces can consume much of the available timing margin.
The primary design consideration is power and signal integrity at the chip level. Decoupling capacitors should be placed close to the supply and ground pins, while the exposed-pad area requires careful via formation and thermal management according to the manufacturer land-pattern guidance. Differential pairs should be routed with continuous impedance-controlled geometry and matched as closely as practical. LVDS output and input topology also requires correct source and receiver termination, otherwise reflections can degrade edge quality despite the buffer's 1 GHz capability.
This product record combines the manufacturer's device description with an application-oriented review of frequency, voltage, packaging, thermal implementation, and clock-distribution design. It also distinguishes the direct replacement listed for the obsolete SY89828LHI from broader Precision Edge devices that may share the clock-buffer category but do not demonstrate the same 64-TQFP pin compatibility. Engineers can use the comparison and guidance to determine whether a drop-in replacement is appropriate and what PCB checks remain necessary.
直接替换替代料: SY89828LHI ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
SY89828LHYTR
✅ 直接替换📋 参考替代料(不在目录中)
SY89828LHI 规格参数
| 功能 | Precision LVDS clock fanout buffer |
| Input-to-Output Ratio | 2:10 |
| Maximum Operating Frequency | 1 GHz |
| Differential Output Pairs | 20 pairs |
| Nominal Supply Voltage | 3.3 V |
| Minimum Supply Voltage | 3.0 V |
| Maximum Supply Voltage | 3.6 V |
| 工作温度范围 | -40 °C to +85 °C |
| 封装 | 64-TQFP exposed pad, 10 mm × 10 mm |
| Terminal Count | 64 terminals |
| 安装类型 | Surface mount |
| Logic Standard | LVDS |
| Clock Type | Differential clock fanout |
| Series | Precision Edge |
| Application Classification | Industrial |
SY89828LHI 64-tqfp exposed pad, 10 mm × 10 mm 引脚配置指南
SY89828LHI(64-tqfp exposed pad, 10 mm × 10 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: SY89828LHI.
请参阅 数据手册 以查看完整引脚配置。
典型应用
SY89828LHI 适用于 6 应用s: Communications Equipment Clock Distribution, Parallel Processor Synchronization, LVDS Transceiver Clock Fanout, Industrial Backplane Synchronization, High-Speed Digital Subsystem Clock Tree, Precision Test and Measurement Timing.
Communications Equipment Clock Distribution
The Microchip SY89828LHI fits centralized clock distribution in communications equipment that requires many closely related differential clock destinations. Its 2:10 architecture and twenty differential LVDS output pairs allow a selected reference to reach as many as twenty output pairs, while the 1 GHz capability supports high-speed digital subsystems. The 3.0 V to 3.6 V operating range centers on a nominal 3.3 V supply, matching low-voltage processing environments. Place the buffer near the distribution point, maintain continuous reference planes, and route each differential pair with matched geometry so the available skew and jitter margin is not consumed by PCB propagation differences.
推荐
Parallel Processor Synchronization
The SY89828LHI can distribute a common differential clock to multiple high-speed processing or interface sections that must begin operation on a shared timing reference. Twenty differential LVDS output pairs provide a practical way to fan a selected input across parallel destinations, while the 1 GHz operating limit accommodates demanding digital clock trees. The design must account for insertion loss, receiver tolerance, return loss, and output-to-output alignment across the board. Use short matched routes from the buffer, avoid unnecessary stubs, and validate the complete distribution path with realistic endpoint loading before treating the timing budget as closed.
推荐
LVDS Transceiver Clock Fanout
The SY89828LHI is appropriate when several LVDS-capable transceivers or line cards require aligned reference clocks from one source. Its differential outputs provide twenty pairs, and the 2:10 selection structure gives the system two input choices for routing or redundancy. Differential signaling is useful in systems where common-mode disturbance can affect single-ended clock quality, provided that trace geometry and terminations are implemented correctly. Confirm the electrical characteristics of every receiver, including input threshold, termination, tolerance, and required clock amplitude, and keep the fanout device close enough to the receiving branches to limit losses over the intended 1 GHz operating bandwidth.
推荐
Industrial Backplane Synchronization
The SY89828LHI can serve as a central timing-distribution element in industrial backplanes carrying several related high-speed subsystems. The device operates from a nominal 3.3 V supply across a 3.0 V to 3.6 V range and supports an industrial temperature span of -40 °C to +85 °C. Its twenty differential LVDS output pairs make it useful where numerous cards or endpoints require a consistent reference. Backplane implementation requires strict impedance control, suitable layer transitions, controlled connector loss, and a receiver-aware termination strategy. Environmental testing should include the full board temperature range, power variation, and adjacent switching activity because those conditions affect the usable clock margin.
推荐
High-Speed Digital Subsystem Clock Tree
The SY89828LHI is suitable for a high-speed digital subsystem that needs one selected differential clock reproduced across multiple parallel domains. Its 1 GHz maximum frequency and twenty LVDS output pairs provide a substantial fanout ratio without requiring a bank of unrelated single-output drivers. The exposed-pad 64-TQFP package supports dense placement, but thermal and routing decisions remain important because package power dissipation and simultaneous output activity can affect junction temperature. Derive the exposed-pad via arrangement from the manufacturer land pattern, keep supply and ground connections short, and analyze endpoint timing with realistic loading rather than nominal frequency alone.
推荐
Precision Test and Measurement Timing
The SY89828LHI can provide synchronized differential clocks to multiple acquisition, conversion, or processing sections in precision test and measurement equipment. Its twenty LVDS output pairs allow reference distribution to widely separated circuit blocks, while differential routing improves noise immunity when implemented with a continuous reference plane. Operation up to 1 GHz offers substantial bandwidth for high-speed measurement chains, although instrument architectures may impose tighter jitter, skew, and amplitude requirements than general-purpose systems. Establish endpoint-specific timing and noise budgets, characterize the selected input configuration, and verify operation across temperature and supply corners to determine whether the buffer's behavior satisfies the instrument specification.
推荐
推荐产品汇总
工程参考数据: SY89828LHI ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | SY89828LHYTR |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 64-TQFP Exposed Pad, 10 mm × 10 mm | 64-TQFP Exposed Pad |
| Device Type | Precision LVDS Clock Fanout Buffer | Precision LVDS Clock Fanout Buffer |
| Input-to-Output Ratio | 2:10 | 2:10 |
| Maximum Frequency | 1 GHz | 1 GHz |
| Differential Output Pairs | 20 pairs | 20 pairs |
| Nominal Supply Voltage | 3.3 V | 3.3 V |
| Supply Voltage Range | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| Lifecycle Status | Obsolete | Active |
| Series | Precision Edge | Precision Edge |
关键差异点
- Direct documented replacement path for an obsolete device (对比 SY89828LHYTR)
- High fanout in a single clock-buffer package (对比 SY89854UMG-TR)
- Distinct Precision Edge alternatives are not automatically drop-in devices (对比 SY89874AUMG-TR)
设计说明
Route every differential clock pair as a continuous impedance-controlled path with a continuous reference plane and closely matched geometry. Avoid stubs and unnecessary branch points, and keep the fanout buffer positioned to minimize the longest endpoint path. At the 1 GHz operating limit, PCB loss and return loss can materially affect clock amplitude and timing margin even when the device itself is operating within specification.
Construct the exposed-pad thermal and electrical connection using the manufacturer's land-pattern guidance rather than relying on a generic via field. Thermal performance depends on the number and size of vias, copper area, adjacent board layers, and ambient conditions. Validate the final assembly at the highest expected output activity and operating temperature, then check the resulting junction temperature against the device limits.
Do not infer pin compatibility from the Precision Edge family name or from a shared clock-buffer category. The SY89828LHYTR is the documented direct replacement for the SY89828LHI because its package, terminals, and functional characteristics are consistent. Other devices such as the SY89854UMG-TR and SY89874AUMG-TR require independent verification of package dimensions, pin assignment, output count, supply range, and electrical behavior.
Place the supply-decoupling network close to the relevant power and ground pins and provide a low-impedance connection between the device and its local capacitors. Validate startup and shutdown behavior across the complete 3.0 V to 3.6 V supply range. Because a 64-TQFP exposed-pad device combines many high-speed outputs, power-plane and return-current paths should be assessed for simultaneous switching activity.
合规信息
Compliance declarations for the specific SY89828LHI orderable configuration require confirmation from Microchip Technology or the relevant regulatory documentation.