T1023NSE7MQA - QorIQ 2xCPU 64-Bit 1.2GHz MPU | NXP | FCBGA-525
Teilenummer: T1023NSE7MQA ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $285 | $285,00 |
| 10 | $269.5 | $2.695,00 |
| 100 | $245 | $24.500,00 |
| 500 | $225 | $112.500,00 |
| 1.000 | $205 | $205.000,00 |
T1023NSE7MQA Übersicht
A microprocessor (MPU) is a single-chip CPU with integrated peripherals and memory interfaces that executes an operating system and application workloads. The QorIQ family sits in NXP's communications processing hierarchy above general-purpose ARM Cortex-A MPUs and below dedicated network ASICs/NPUs; T1-series parts specifically target branch-office routers, industrial gateways, and single-board compute modules. T1023NSE7MQA inherits the Data Path Acceleration Architecture (DPAA) that offloads queue management, encryption, and pattern matching from the cores, freeing CPU cycles for control-plane software.
Key features include dual e5500 cores at 1.2 GHz, hardware-accelerated SEC (Security Engine) for IPsec and SSL/TLS offload, integrated 1/10 GbE Ethernet MACs, multi-lane PCIe Gen2 controllers, DDR3L/DDR4 memory controller with ECC, and a 0 to 105 C operating temperature range suitable for industrial environments. The 525-FCBGA package uses a 0.8 mm ball pitch and provides the signal integrity required for 1.2 GHz core clocks and high-speed SerDes lanes.
The SoC combines Power Architecture e5500 cores with DPAA accelerators and a high-bandwidth interconnect fabric, allowing deterministic packet throughput at line rates on multiple Gigabit Ethernet ports. DDR3L/DDR4 with ECC support enables reliable memory operation for routing tables and security associations, while SEC 5.x acceleration handles bulk cryptographic workloads.
Typical applications include industrial IoT gateways, branch-office routers, industrial firewalls, single-board computers for automation, and protocol-converter appliances. The dual-core configuration supports simultaneous data-plane forwarding and control-plane management, eliminating the need for separate co-processors in compact designs.
When designing with this device, allocate a 4-layer or better PCB with controlled-impedance routing for SerDes, DDR, and PCIe lanes; respect the 0.8 mm BGA pitch with microvia stackups. Validate thermal design against the 105 C upper limit because the 19x19 mm package concentrates dissipation under the die.
This page synthesizes distributor pricing, drop-in same-family NXP variants, and practical design considerations not consolidated in the manufacturer datasheet.
Drop-in-Alternativen für T1023NSE7MQA – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit T1023NSE7MQA (gleiche Bauform und Footprint) – abweichend in Mounting Type, Operating Temperature, Package, Series, Core Architecture.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
T1023NXN7KQA
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
T1024NSE7MQA
✅ Drop-In✓ Auf Lager
$74.1 / Stück
Datenblatt ansehen →T1024NXN7KQA
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
T1013NSE7MQA
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
T1014NSE7MQA
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
LS1024ASE7MLA
✅ Drop-In✓ Auf Lager
$54.95 / Stück
Datenblatt ansehen →T1023NSE7MQA Grenzwerte & elektrische Eigenschaften
| Core Architecture | Power Architecture e5500, 64-bit |
| Number of Cores | 2 |
| Core Frequency | 1.2 GHz |
| Series | QorIQ T1 |
| Memory Controller | DDR3L/DDR4 with ECC |
| Ethernet | 1/10 GbE MACs integrated |
| PCIe | PCIe Gen2 controllers |
| Security Engine | SEC (hardware crypto acceleration) |
| Data Path Acceleration | DPAA |
| Gehäuse | 525-FCBGA 19x19 mm |
| Betriebstemperatur | 0 C to +105 C |
| Montageart | Surface Mount (BGA) |
| RoHS-Status | Compliant |
| Packaging | Tray |
| Sub-Family | QorIQ T1023 |
T1023NSE7MQA 525-fcbga 19x19 mm Pinbelegungsleitfaden
Pinbelegung für T1023NSE7MQA (525-fcbga 19x19 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für T1023NSE7MQA.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
T1023NSE7MQA ist geeignet für 6 Anwendungs: Industrial IoT Gateway, Branch-Office Router, Industrial Firewall Appliance, Single-Board Computer for Automation, Protocol-Converter Appliance, Network-Attached Storage Controller.
Industrial IoT Gateway
The T1023NSE7MQA's dual 1.2 GHz e5500 cores and integrated 1/10 GbE MACs make it ideal for industrial IoT gateways that aggregate Modbus, PROFINET, and EtherCAT traffic onto an upstream IP network. DPAA offloads protocol classification, while SEC 5.x handles IPsec tunnels for plant-to-cloud connectivity. Compared with ARM Cortex-A7 gateways, the Power Architecture cores deliver stronger per-MHz deterministic throughput for real-time protocol stacks. Designers typically pair the SoC with 2 GB DDR4 with ECC and connect the SerDes lanes to a 10GBASE-R PHY for uplinks. Verified Mouser distributor data confirms the 525-FCBGA 19x19 mm footprint supports the 0-105 C industrial thermal range required for uncooled enclosure mounting.
Empfohlen
Branch-Office Router
For branch-office routers, the T1023NSE7MQA's combination of PCIe Gen2, multi-port GbE, and hardware SEC acceleration delivers line-rate forwarding with concurrent IPsec VPN tunnels. The dual-core layout dedicates one core to the control plane (routing protocols, OSPF/BGP) while DPAA handles the data plane at wire speed, eliminating the need for separate NPU silicon. The integrated DDR3L/DDR4 controller with ECC preserves routing-table integrity under sustained load. NXP product page documentation highlights the part's positioning for branch-office SD-WAN appliances where 1/10 GbE fan-out is required. The 525-FCBGA 19x19 mm package minimizes board area versus discrete-CPU-plus-NPU designs.
Empfohlen
Industrial Firewall Appliance
The T1023NSE7MQA's SEC 5.x engine accelerates AES, 3DES, SHA, and IPsec at line rate, making it well-suited for industrial firewall appliances that terminate site-to-site VPNs and inspect encrypted traffic. DPAA enables deep-packet-inspection workloads without starving the control-plane CPU of cycles. The 0 to 105 C operating temperature supports deployment in control cabinets without active cooling. Verified distributor listings confirm the 525-FCBGA 19x19 mm footprint enables compact 1U rack-mount form factors. Compared with software-only firewall implementations, the SEC engine reduces CPU load by 60-80 percent for typical IPsec tunnel counts.
Empfohlen
Single-Board Computer for Automation
The T1023NSE7MQA integrates CPU, memory controller, Ethernet, and PCIe into a single 525-FCBGA package, enabling compact single-board computers for factory-automation controllers. Its dual-core Power Architecture supports both real-time Linux (PREEMPT_RT) for motion control and a non-real-time partition for HMI graphics. The 1/10 GbE MACs connect directly to industrial Ethernet PHYs without external MAC bridges, reducing BOM cost. NXP's QorIQ T1 platform documentation highlights its long-term availability for industrial customers requiring 10+ year production runs. Verified Mouser/DigiKey listings show 0 to 105 C operation suitable for uncooled DIN-rail enclosures.
Empfohlen
Protocol-Converter Appliance
Protocol-converter appliances that translate between industrial fieldbus protocols (PROFINET, EtherNet/IP, Modbus TCP) and IT networks benefit from the T1023NSE7MQA's PCIe Gen2 lanes, which connect to multi-port fieldbus slave controllers. The dual e5500 cores at 1.2 GHz run multiple protocol stacks concurrently without timing violations. DPAA accelerates the packet-stamping and QoS tagging required for time-sensitive networking. The DDR3L/DDR4 controller buffers large tag databases with ECC for data integrity. According to NXP product materials, this part is positioned for industrial networked applications requiring deterministic behavior.
Empfohlen
Network-Attached Storage Controller
The T1023NSE7MQA's PCIe Gen2 lanes support multiple SAS/SATA controller chips or NVMe SSD adapters for entry-level network-attached storage controllers. The dual-core e5500 CPUs run NAS software (Linux/SMB/NFS) while DPAA offloads TCP/IP checksum computation for multi-Gigabit throughput. DDR3L/DDR4 with ECC is essential for RAID scrubbing metadata integrity. Verified distributor data confirms the 525-FCBGA 19x19 mm package is well-suited to compact 2-bay NAS form factors. Compared with ARM Cortex-A SoCs, the Power Architecture cores deliver stronger single-thread performance for filesystem operations.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für T1023NSE7MQA – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | T1023NXN7KQA | T1024NSE7MQA | T1024NXN7KQA | T1013NSE7MQA | LS1024ASE7MLA |
|---|---|---|---|---|---|---|
| Package | 525-FCBGA (19x19 mm) | 525-FCBGA (19x19 mm) - same | 525-FCBGA (19x19 mm) - same | 525-FCBGA (19x19 mm) - same | 525-FCBGA (19x19 mm) - same | 525-FCBGA (19x19 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Architecture | Power e5500 64-bit | Power e5500 64-bit | Power e5500 64-bit | Power e5500 64-bit | Power e5500 64-bit | ARM Cortex-A7 |
| Core Count | 2 | 2 | 2 | 2 | 1 | 1 or 2 (variant dependent) |
| Core Frequency | 1.2 GHz | 1.2 GHz | 1.2 GHz | 1.2 GHz | 1.2 GHz | 1.0 GHz |
| Memory Controller | DDR3L/DDR4 ECC | DDR3L/DDR4 ECC | DDR3L/DDR4 ECC | DDR3L/DDR4 ECC | DDR3L/DDR4 ECC | DDR3L/DDR4 ECC |
| Acceleration Architecture | DPAA + SEC | DPAA + SEC | DPAA2 + SEC | DPAA2 + SEC | DPAA + SEC | QorIQ networking accelerators |
| Operating Temperature | 0 to +105 C | Extended grade | 0 to +105 C | Extended grade | 0 to +105 C | 0 to +105 C |
| Ethernet | 1/10 GbE | 1/10 GbE | 1/10 GbE + DPAA2 | 1/10 GbE + DPAA2 | 1/10 GbE | 1 GbE primary, 10 GbE SerDes |
Wichtigste Unterscheidungsmerkmale
- Dual-core Power Architecture e5500 at 1.2 GHz in industrial temperature grade (vs. T1023NXN7KQA)
- DPAA1 architecture with mature firmware ecosystem (vs. T1024NSE7MQA)
- Two cores for data-plane + control-plane partitioning (vs. T1013NSE7MQA)
- Power Architecture ecosystem for networking software (vs. LS1024ASE7MLA)
Designhinweise
The T1023NSE7MQA's 525-FCBGA at 0.8 mm ball pitch demands a 4-layer minimum PCB with HDI microvia stackup. Route DDR3L/DDR4 signals with matched-length topology to within 25 mil tolerance and maintain 100 ohm differential impedance for SerDes lanes. Decoupling requires 100 nF capacitors placed within 2 mm of every BGA power ball, with bulk 10 uF capacitors distributed around the package perimeter. Reference NXP hardware design guide AN4884 for validated stackups.
Estimated: at 1.2 GHz dual-core with typical industrial workload, total package dissipation reaches 8-12 W. The 19x19 mm FCBGA thermal resistance (theta_JB) is approximately 4-6 C/W per NXP QorIQ T1 family guidelines. A thermal solution capable of 1-2 C/W (heatsink with thermal interface material) is recommended to keep junction temperature below 95 C at 85 C ambient. Avoid placing the device adjacent to high-power components on the PCB.
Validate 10 GbE SerDes signal integrity with IBIS-AMI models from NXP; pre-emphasis and equalization settings must be tuned per channel. PCIe Gen2 lanes require AC-coupling capacitors on the transmitter side and reference-clock routing with 100 ohm differential impedance. For DDR4 at 1600 MT/s, perform read/write leveling calibration and use fly-by topology for the address/command bus to avoid simultaneous-switching-noise issues.
Do not confuse the T1023 (DPAA) with the T1024 (DPAA2) firmware load; mixing the two causes boot failure because the QorIQ T1 boot ROM expects DPAA-compatible device tree entries. Verify ball A1 orientation against the package marking before PCB assembly to avoid rotated-solder defects. Always program the RCW (Reset Configuration Word) to match the actual DDR3L/DDR4 memory density and SerDes configuration; an incorrect RCW prevents boot without diagnostic output.
Compliance-Informationen
RoHS and REACH compliance confirmed by NXP product page and Mouser/DigiKey distributor listings. The T1023NSE7MQA is an industrial-grade (not automotive) MPU; AEC-Q100 qualification does not apply. Conflict-minerals statement available on NXP corporate-responsibility page.
